Toyota Corolla LED Interior - How To Install - 2013-Present
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- Complete Installation process of Toyota Corolla interior led lights.
Find it here:
Standard: goo.gl/BNUvoj
Premium: goo.gl/nvKwSo
Compatible with all 11th Generation Toyota Corolla
2013, 2014, 2015, 2016
The LEDs and tools used in this tutorial can be purchased at www.PrecisionLED.com
Direct Product Link:
Standard: goo.gl/BNUvoj
Premium: goo.gl/nvKwSo
For purchasing and production information on this LED kit or other vehicles contact:
www.precisionled.com/contact.html
Did this video help? Please support us by subscribing to our TH-cam Channel. It's nice to know our customers and friends care!
00:00 - Introduction
00:56 - Front Map LED Installation
03:05 - Rear Dome LED Installation
07:25 - Trunk LED Installation
08:41 - Reverse Light LED Installation
10:23 - License Plate LED Installation
13:11 - Outro
⇢ Subscribe: / precisionled
⇢ Instagram: / precisionled
⇢ Facebook: / precisionled
⇢ Twitter: / precisionled
Thank you,
-PrecisionLED
#Toyotacorolla #toyotacorollaledlights #carledlights #howtoinstallledlights #carledlightsfortoyota - ยานยนต์และพาหนะ
Just now installed all 8 of these bulbs into my 2015 corolla (in 2022) and let me say it all worked out well in the end and the bulbs they're selling today all work great as expected, especially those which are the 360-degree premium bulbs. Let me fill you in on some side-pointers if I may -- very important:
1. Regarding the map lights, they were in there very snug and did not want to come out, so I ended up turning the black socket counterclockwise and it ended up getting sucked up into the back of the fastening plate. So, if you cannot get your bulbs to easily come out, I urge you to use one of the prying tools (flat end) and pry the entire assembly out so you can get to the back side, from there all is self-explanatory. 2. Dome light: On my car the lens was too tight to use the tool Phil used in this video, you'll need to use the 'fork" tool; when you get the lens to pop out you don't have to take out the assembly, just use the pointy tool to slightly bend back the side (driver's side in my case) of the bulb holder pop the bulb down and out with another tool of some sort. When inserting the new 360-degree bulb it's ok to push slowly and hard to get it positioned, then I took metal tweezers and gently bent the prong inward to further secure the bulb so it wouldn't pop out later -- it worked out great, the bulb is bright as hell and it's not going anywhere. 3. The reverse lights went in as simple as in this video. 4. Using the fork tool and a steel pair of super thin pliers I finally got my fastening grommets out of the cover, then proceeded to grab onto and pull out the back of the bulb holder -- getting the new bulbs out was not as easy as in the video -- you notice some bulbs to not want to come out and take some ingenuity to get out. Once out and replaced the hard part for me was to gently get the back assembly turned and tightened, again, not as easy as in the video -- but it works and is self-explanatory. There you go, I hope this adds to the ease of changing your bulbs -- all Toyotas can be slightly different, so be ready to modify your efforts if needed. P.S., my OEM passenger reverse bulb was a bitch to take out and ironically the left was easy, again, depends on who installed it on the assembly line -- but they are "super-bright" and you will be please with your new bulbs from Precision LED. Go for it! Good Luck.
Excellent tutorial, I really glad somebody finally did it professionally, thank you. I have one question though how to install auto dimming rear view mirror in the same Corolla
The new corolla looks really good !
It's a really nice car to do an upgrade on!
Ordered some and excited to get them. Thanks for the help. i kinda started looking and working with it even though i dont have them hahaa i needed help on the license plate and tail lights because i wasnt too sure
We hope the installation went smoothly!
just did this really helped thanks bro
Nice video, I'm about to order mines
Hope the install went smothly!
In a few days iam gonna do the same things ro my 2016 toyota corolla thankyou so much for this video it really helped me a lot thanks.
Thank you for watching, we hope it went smoothly!
I enjoy the video it made things easy to install👍
Glad to hear! Thanks for watching!
great disciplined presentation
Thank you for tuning in!
awesome how-to!!
Thank you!!
Actually a very useful video!
Thank you so much for tuning in!
Bought lights from LED based on great instructional video. Great lights, tools really helped and made for easy install. Also packing was really well thought out. Each light was labeled in it's own bubble wrap so no confusion on what went where. Took about 20 minutes for new bulbs and quality of light is so much better then the stock bulbs!
Thank you for the positive review and thank you for your purchase!
I know im asking the wrong place but does anyone know of a tool to log back into an Instagram account??
I was stupid forgot my account password. I love any help you can offer me!
@Zander Kristopher Instablaster =)
@Kayson Randy Thanks for your reply. I got to the site on google and I'm trying it out atm.
Looks like it's gonna take quite some time so I will reply here later with my results.
@Kayson Randy It did the trick and I now got access to my account again. I am so happy!
Thank you so much you saved my account !
very well presentation helpful video, thanks for sharing with the world....
We are happy to help, thank you for watching!
Thank you
You are very welcome!
very helpful.
Thank you for watching!
+PrecisionLED Do you know how the best way to find the harness/clip for the map light? Mine became dislodged during the process.
thank you
Thanks for watching!
This guy is an excellent teacher!
Thank you for the kind words!
The 2017-2018 Corolla SE/XSE comes with led tail lights, led headlights and led daytime lights, a strip down the front bumper
Thanks for the info!
Does anyone know how to remove the front dome entire part? Please help is it just a pull out part I need to take out the entire front part thanks
disregard found it!!! Thanks
👍
Nice
Thanks!
How can I buy that Precison LED Kid for a 2016 Corolla?, thanks for the video, it's very useful.
Question. I am changing my front interior light on my 2014 Corolla, but the clip where the bulb goes went up into the crowded space and I can’t seem to get it back out. Any helpful tips on how to get it back
My bulb got pushed into the opening and up into the car..
Is there a way to remove the whole casing for the map lights??
Any link where to buy it from ?
nice
Thank you!
Nice video my friend!! What about sun visor lights ???
I believe the sun visor lights you are referring to are stock LED, which you cannot replace as they are soldered to a chip and board.
Do you know how to do 2019 corolla hatchback map lights? Thanks
The map lights on the 2019 should be identical to as shown in this video. Unless, of course, the lights are stock LED which you cannot replace as they are soldered to a chip and board.
How about the corolla with the sunroof? Idk how to open it! Im scared to pry it i might break the cover
If you'd like, feel free to send a picture of the receptacle to help@precisionled.com and we can suggest a solution!
will these work for the lights on the trunk as well ? the ones that shine on your license plate. Thanks
Yes, our product would indeed work for your license plate lights. You can add the license plate lights via the package, or purchase the license plate LEDs separately on our website.
What bulbs would I need for a 2019 Toyota Corolla hatchback?
The kits linked in the description box above would be compatible with your 2019 Corolla!
I got a question recently my dome light, tail light is not working. I realize my fuse blew out so I bought new fuse and install it. Everything is fixed but the front map light is not working on the right side I changed everything but theres no light. I dont know if its the fuse or did I put it wrong. Can somebody help me out? I got the toyota corolla s 2015. Thanks in advance.
JM Dilig I would suggest buying huge pack of fuses and then check both fuse boxes to see which one is blown then replace those and then put led in it should work also I don't have much experience putting led in corolla since I just bought it within same week so I was told to either unplug the battery then put led in before you blow any fuses
I just received my package of LED lights from you guys.. And this video was so helpful and on point. installation was just like shown. And the lights are fuckin sick.!!!! my corolla S looks a lot sleeker now with this nice touch.. awesome vids and products. I'll be ordering the rest of my lights soon..
Thank you for the input, and we are happy to hear you're pleased with your purchase!
One of the bulb houses falls into the the front map base, how do I get the whole base out in order to get the bulb house?
Were you able to get the whole base out ???
If so, can you tell me how ??
WIll this work for the new 2017 toyota corolla?
Yes, we do have listed the installation for the 2017 Corolla would be very similar, if not identical to as shown in the video.
Wait so for the rear license plate you need a specific size for them?
Yes, you would need to use the T10 bulb that we installed in the video which you can find here: www.precisionled.com/t10-canbus-5-smd-led.html
Is there supposed to be an LED light inside the glove box of a 2014 Toyota Corolla?
I believe so!
Are those the 6k crystal white or the 8k cool white bulbs?
Thank you for your interest. The 6000K color temperature is used in the video.
Hi wats the colour temperature of those led headlight
We only sell our headlamp kits in the 6000K color temperature, as it is the brightest, with the best nighttime driving visibility.
Is It work with 2016 Corolla S ? sorry Im not good english
+ki thinh Yes, it will work!
PrecisionLED the dome light will not fit
What kind of type is dome light ? mm?
This is a 29mm, which you can find here: www.precisionled.com/premium-festoon-29mm-canbus-3smd-5730-led.html
I was having a hard time removing the halogen bulb from the license plate part, why is that?
Thank you for contacting PrecisionLED. It is not typically difficult to remove any halogen bulb from your vehicle. However, we do sometimes require assistance with some tape. If you would like a more detailed explanation on how some tape may help, feel free to contact us directly at help@precisionled.com.
+PrecisionLED I broke the halogen bulb then just pulled it out with a long nose pliers but when I installed a new LED it was bent because I think the LED was long but it still works
Were the LEDs purchased from PrecisionLED? If so, if you have having issues, feel free to contact us directly at help@precisionled.com.
where can you order the kit?
Here is a direct link: goo.gl/nvKwSo
Hey I can’t take the bulbs out
I would recommend watching the video I have linked below. It would likely help you to remove the halogen bulbs.
th-cam.com/video/mXz0e_QB1F4/w-d-xo.html
Is it the same for 2010 corollas?
Yes, the installation process would be very similar, if not identical to as shown in the video for the 2010 Corolla.
PrecisionLED thanks
What is this song i like it
Thanks! A friend put the track together for us a while ago, Antronomics - Chopin Beat.
@@PrecisionLED sorry I couldn't get to you too fast I forgot about the comment
Used a credit card to remove all the plastic.
Ivan Rodriguez helpful🙏
Yes a credit card works for alot of things it just incures intrest 😆
Great idea!
Dude these lights are not the same set up as the 2013. Wtf are you talking about??