Bro you did a massively impressive work here. You made this gadget look like a toy. Am returning my new mixer console and getting this . Thank you I met your channel.
Have to use this old-school desk for a FOH gig today...couldn't really find a proper video with a decent overview, until I stumbled upon your channel. Very clear video & explanation, thanks Kelvin.
excellent explanation, I have the MG32/14fx, and the question is, how can I make the effects 5 and 6 functions like aux and effects at the same time. Thank you, greetings.
Bro we just bought yamaha mG32/fx, but channel 1-8, when you place a 🎤there, it only comes on one side of the speaker, even though we havent pan it. What could be the problem? From the factory?
Hello Kevin. Thank you for your videos, I'm learning a lot. Well, after watching many of your videos, our church admin agreed to buy the Yamaha mg24. But please how do I Livestream sound with the focusrite Scarlett 2i2 audio interface because we've always been using a Yamaha 12 channel analog mixer and I have been streaming with the aux knob through the send output. Please help me how I can have everything drums, guitars, keyboard, backups, preachers ... Everything in the online sound. Thank you
Thanks Mr kelvin..I have two.separate questions. 1. Where do I connect to pick my audio for live streaming. 2. My church has a mini studio (like a place where we control the sound) where do I connect a speaker to monitor the sound Thanks
Thanks! I have a Yamaha MGP24X 24-channel Mixer and need help. I use the first 7 channels to mic my drum kit. I only listen through headphones. I can only get the top four EQ controls to work through headphones. None of the other effect knobs in the channels have any effect whatsoever in my headphones. What am I missing? I'm a drummer, not a sound guy. So please answer as if I'm nine years old. :P
I set my channel 1 to my bass guitar and I want to send it to my subwoofer only.. I used the mono fader to send output to the subwoofer but I can’t hear any sound from the sub until I activate the stereo bus control switch on the channel.. Am I supposed to do that even though I am sending out with mono?
Yes, you have to. The Mono output is just a sum of the Stereo Left and Right, and you use the ST switch to send signals to both of them. Consider using the group output for your subwoofers instead. This would enable you to send your bass to the sub and not the top speakers.
Good day sir please I really want to know more about the effect nope when I press down the aux 5 and 6 prefade button after the effects knob my effects seems to stop completely until I release the button. So please why is it so thanks and God bless
The "Effects" 1 and 2 knobs are also used as Aux 5 and 6 sends. When you press the "Aux 5 and 6" button, the knobs become sends for aux 5 and 6, cutting off from the effects unit; hence why the effects seem to stop completely. It has been designed to work like that.
Thanks ba I hv a question.... I hv used different mixers B4 buying this for my church ba I can't Solo (I can't pick 1 channel solely to listen to it in the headphone) like other mixers. Whenever I press PFL I still hear other channels even without turning on their PFL. Pls is there a way to do this
PLF works just the way the SOLO button works. For this mixer, all the output buses also have AFL buttons, which send audio to the headphones as well. Check to make sure you have disabled all the AFL and PFL switches before engaging the channel you want to listen to in your headphones. This might be the reason you are hearing other channels from the headphones.
@@KelvinEriaganoma OK. Thanks I took all AFL out and now I can use the PFL as solo. Thank u So i do live streaming ba the sound is not clear and at the same time is not as loud as other live streaming I listen to. I use OBS. Pls I want to know whether using the AUXs as feeds for my live stream is best or I should I need to use a different port for it. 2ndly my subs are not as heavy as I would love to, I make sure my kick and bass guitar don't show peak sign on the mixer pls what do I do to enhance the bass sound in the church. My subs are 2 pairs of 18 inch speaker I'm yet to put them in 1 box for it to be a pair of double bass and OH I use a compressor too. Thank you
Hello, thanks for this tutorial I have learned a lot but I have a qsn in the case you have a bass guitar and a kick mic how will i route it to the mono channel that goes to the bass amp and not be heard in the house spkrs
This very interesting because my church uses the mg24 and I want to know how you turn up the sound for the group out channels because I use it to connect to a Scarlet 2i2, what is pretty weird is that that main singers voice is great when coming out the speakers but on the audio interface it does not, it sounds as he sing far away, and all group channels are turned on. What would you recommend me to do?
Is there a way you can have the effects go to the headphones so you can monitor. Such as recording live stream with effects so that they don’t sound so dry.
The fader is a sliding control that varies the volume of a signal. The gain on the other hand, is used to match the input signal to the nominal voltage level of the mixing console, thus, ensuring the best signal-to-noise ratio. Check out this video on how to use gain, for more information. th-cam.com/video/M1yffayggVI/w-d-xo.html
First of all, you need to engage the High Pass Filter for all your other microphones (vocals and drums) and probably review your mic placement to limit subwoofer/low-frequency bleeds into them. Also ensure that all the AUX knobs on the kick drum channel are completely turned down, so as to avoid sending the kick drum sound directly to the monitors. I trust you have a better mixing experience.
"Pretty interesting tut", Bro😊 I wished you had also touched upon the back panel with the various inputs and outputs. But it was an altogether great review altogether
Bro you did a massively impressive work here. You made this gadget look like a toy. Am returning my new mixer console and getting this . Thank you I met your channel.
You are very outspoken, and the way you spoke in a clear way is topnotch.
Fantastic video dude. Your explanations are really good and useful for probably many desks using similar terms and signal flows.
I pulled my old MG24/14FX out and hadnt used for a while. This is a perfect refresher for a dumbass like me.
Have to use this old-school desk for a FOH gig today...couldn't really find a proper video with a decent overview, until I stumbled upon your channel. Very clear video & explanation, thanks Kelvin.
Glad it helped!
Kelvin thank you very much. I have watched most of your videos and it has really helped me since I got this Yamaha mixer
You are doing an impressive job...keep it up Kelvin❤
Thanks bro for all of your lessons I have gone through them and hv learned so many things from you God bless your hands
Excellent video
Thank you so much for this video and many others you have created. I am a beginner and your content is very helpful. Please keep making more.
I sure will.
Thank you for your words.
excellent explanation, I have the MG32/14fx, and the question is, how can I make the effects 5 and 6 functions like aux and effects at the same time. Thank you, greetings.
I'm having difficulties recording from my mixer, kindly assist
Bro we just bought yamaha mG32/fx, but channel 1-8, when you place a 🎤there, it only comes on one side of the speaker, even though we havent pan it. What could be the problem? From the factory?
Hello please how do I assign Bass guitar and drums to the sub woofer??
I just want to know how to get a low pass signal for drum kick
Hello Kevin. Thank you for your videos, I'm learning a lot. Well, after watching many of your videos, our church admin agreed to buy the Yamaha mg24. But please how do I Livestream sound with the focusrite Scarlett 2i2 audio interface because we've always been using a Yamaha 12 channel analog mixer and I have been streaming with the aux knob through the send output.
Please help me how I can have everything drums, guitars, keyboard, backups, preachers ... Everything in the online sound. Thank you
Many Thanks. i am a total beginner 💯👍🏁
This video helped me. Cheers!
Cheers to being helped.🥂
Thanks Mr kelvin..I have two.separate questions. 1. Where do I connect to pick my audio for live streaming.
2. My church has a mini studio (like a place where we control the sound) where do I connect a speaker to monitor the sound
Thanks
I'll suggest you check out this video on ‘how to use the different outputs on a mixer’ first.
th-cam.com/video/stMaNN8uywo/w-d-xo.html
Thanks
Thanks for the service
More light on the returns
All these various outputs how tf do u connect them to an amplifier and howmany amp will be needed
Thanks for this.
Pls can you do a video on the back panel.
Sure! 🙂
Hi Boss Please how can i record my sermons using this particular Mixer MG24/14fx
I'm working on that video
Thanks! I have a Yamaha MGP24X 24-channel Mixer and need help. I use the first 7 channels to mic my drum kit. I only listen through headphones. I can only get the top four EQ controls to work through headphones. None of the other effect knobs in the channels have any effect whatsoever in my headphones. What am I missing? I'm a drummer, not a sound guy. So please answer as if I'm nine years old. :P
To have a better sound on this MG 24- 14 FX mixer, you can adjust the equalizer settings. Here's how you can do it:
please help me give me a tutorial about the TalkBack microphone if it is possible to connect it using this
I set my channel 1 to my bass guitar and I want to send it to my subwoofer only.. I used the mono fader to send output to the subwoofer but I can’t hear any sound from the sub until I activate the stereo bus control switch on the channel.. Am I supposed to do that even though I am sending out with mono?
Yes, you have to.
The Mono output is just a sum of the Stereo Left and Right, and you use the ST switch to send signals to both of them.
Consider using the group output for your subwoofers instead. This would enable you to send your bass to the sub and not the top speakers.
Good day sir please I really want to know more about the effect nope when I press down the aux 5 and 6 prefade button after the effects knob my effects seems to stop completely until I release the button. So please why is it so thanks and God bless
The "Effects" 1 and 2 knobs are also used as Aux 5 and 6 sends. When you press the "Aux 5 and 6" button, the knobs become sends for aux 5 and 6, cutting off from the effects unit; hence why the effects seem to stop completely. It has been designed to work like that.
Thanks ba I hv a question.... I hv used different mixers B4 buying this for my church ba I can't Solo (I can't pick 1 channel solely to listen to it in the headphone) like other mixers. Whenever I press PFL I still hear other channels even without turning on their PFL. Pls is there a way to do this
PLF works just the way the SOLO button works. For this mixer, all the output buses also have AFL buttons, which send audio to the headphones as well.
Check to make sure you have disabled all the AFL and PFL switches before engaging the channel you want to listen to in your headphones.
This might be the reason you are hearing other channels from the headphones.
@@KelvinEriaganoma OK. Thanks I took all AFL out and now I can use the PFL as solo. Thank u
So i do live streaming ba the sound is not clear and at the same time is not as loud as other live streaming I listen to. I use OBS. Pls I want to know whether using the AUXs as feeds for my live stream is best or I should I need to use a different port for it.
2ndly my subs are not as heavy as I would love to, I make sure my kick and bass guitar don't show peak sign on the mixer pls what do I do to enhance the bass sound in the church. My subs are 2 pairs of 18 inch speaker I'm yet to put them in 1 box for it to be a pair of double bass and OH I use a compressor too. Thank you
Best way to set your sub woofer?
And to connect it
i want 1 of this mg right now! great video
Thank you 😁
Good day sir, whats the main work of the mono ?
Thank you Kelvin, I love your video. Please, I want to know can Yamaha MG32/14FX record audio to PC
you didn't talk about the faders. Do you have any videos that talk about faders vs gain?
Is it right to turn on the phantom power?
Sir orudavudu holling problem varudu sir eppadi holling problem illamaal solving panuvadu ples Tamil translate
Hello, thanks for this tutorial I have learned a lot but I have a qsn in the case you have a bass guitar and a kick mic how will i route it to the mono channel that goes to the bass amp and not be heard in the house spkrs
What is best used to stereo channels
Bro u are an amazing dude.....pls do a video on grouping thanks
There you go…
How to use GROUPS on a Mixing Console | Group Busses, Group Outs, Group Inserts
th-cam.com/video/FOPwLkzJQLM/w-d-xo.html
@@KelvinEriaganoma thanks man
kya is model ka mg32 mixet miljaega new pice
Sir kelvin..what the best effect in mg32 Yamaha mixer..when using the 2 internal effects?
This very interesting because my church uses the mg24 and I want to know how you turn up the sound for the group out channels because I use it to connect to a Scarlet 2i2, what is pretty weird is that that main singers voice is great when coming out the speakers but on the audio interface it does not, it sounds as he sing far away, and all group channels are turned on. What would you recommend me to do?
Is there a way you can have the effects go to the headphones so you can monitor. Such as recording live stream with effects so that they don’t sound so dry.
Sure. Engage AFL for the output bus you've sent the effects to, and you'll be able to monitor the effects along with the rest of the mix.
@@KelvinEriaganoma you are awesome brooo
Morning bro. Please can I get in touch with you?
Please differentiate between Gain and Fader
The fader is a sliding control that varies the volume of a signal. The gain on the other hand, is used to match the input signal to the nominal voltage level of the mixing console, thus, ensuring the best signal-to-noise ratio.
Check out this video on how to use gain, for more information.
th-cam.com/video/M1yffayggVI/w-d-xo.html
Thanks so much sir
How do you eliminate kick drum sound from the monitor speakers in Yamaha M24
First of all, you need to engage the High Pass Filter for all your other microphones (vocals and drums) and probably review your mic placement to limit subwoofer/low-frequency bleeds into them. Also ensure that all the AUX knobs on the kick drum channel are completely turned down, so as to avoid sending the kick drum sound directly to the monitors.
I trust you have a better mixing experience.
"Pretty interesting tut", Bro😊
I wished you had also touched upon the back panel with the various inputs and outputs.
But it was an altogether great review altogether
Thanks
How much now
Thanks so much for the video
You're welcome.
Does it need an amplifier?
Yes sir, it does.
Thanks Boss.. That was a lot helpful... I go like chat you up if you don't mind
Subscribed and like~!❤
this very importe for us begine make more
Thanks man
You’re welcome
Merci beaucoup
De rien
❤
Sar aapka Hindi mein koi video nahin hai kya