Connecting a mixer to an equaliser,a crossover and an amplifier
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- we are located at the junction of luthuli and kamae Road, our shop is the ground floor of lucky house that's the 2nd building on the left...
we deal with a variety of sound equipment and musical instruments,
we also offer after sale service to our esteemed customers.
our prices are the most friendly compared to other shops ,
come experience professionalism at an affordable rate
![[FULL EP.16] เซียนพาลุย "เผือก-ฟรอยด์" กรี๊ดลั่น จนปูหนี | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/FsqUvwS3b-Y/mqdefault.jpg)
❤❤
I'm grateful.
I was really looking for this. Thank you very much, Boss.
Your explanations are very clean and simple.
From Nigeria.
My first time seeing your channel but you are an amazing teacher....God bless your heart and team
Waaaaoh thank you
Thank you for your vlog about how to connect mixer, equalizer,cross over and amplifier tutorial vlog it's difficult to have a wonderful connect ion.thank you again for your vlog brother.
This is the best and simplest explanation I've had on this subject
Very educative.
I'm new to learning sound.
I found this video very helpful.
Thank you very much.
Bro Thanks, so much I really appreciate what you did God will blessed ur work in Jesus name. Am also sounds engr from Nigeria.
Keep posting videos like this,very simple to understand, thanks for the video.👍👍👍
Clean music, clean explanation! Thanks sir!
This is exceptional.
Thanks a lot.
All the way from Nigeria
Thank you so much Decibel Audio, this is the best tutorial I've watch on this subject.
Good tutorial sir I appreciate this vedio..thanks for sharing this content ❤continue to cheers this 👍
God bless you brother. Very clear video. Easy to understand and learn
This is the best explanation that I ve seen.very clear and very precise. Well done.can you do a tutorial on outputs on a mixer.explain where each outputs lead to.
merci pour les explications
Thanks for the video, well explained. My question is, how do you connect an Equalizer to a crossover if you are using two amplifiers, one amplifier for mid-speakers and the other amplifier mainly for subspeakers.
Yeah how is that done
F
I have the same question sir thank you
This is great for the beginning of sound mixing thanks so much brother for Sharing your knowledge 💞 just love it
Woww...just wow. With so little you have managed to deliver sir. Very important video you just shared. I am starting a PA System and i have been looking for such. Didn't know the use of the cross over until now.
We are glad you got the some.little knowledge to jam start your sound journey 😀
Crossover is basically meant to separate the signal into dedicated frequency ranges for different speakers. In digital realm you can achieve very similar results sending your LR signal into Matrixes and filtering the sound in dedicated EQs. For example, using a low pass filter at 90-100 Hz separate the lows and send them separately into the Subs, then using high pass filter at the same frequency on a different Matrix and send the rest into the Tops...also, it could be done in more detail and separate the mids and the highs too, but it depends heavily on what speakers you are using, what inputs you have and all that jazz.
I'm a sound engine looking for good place to sound
U're really a good teacher...I wish to join you for an upgrades
No he's not a good teacher. He should have everything he needs to teach read to be shown for a how to do. Good teachers will set up display ALL the items of a subject before properly and not with a camera to make a person feel dizzy.
Not that it made Me feel dizzy, but his camera is not steady. All that equipment and no tripod/other for his phone? That IS NOT a really good teacher.
Thank you for this... Using this connection how many full range speakers can you power with this? And what if you need to have separate control for stage monitors and main house
Thanks.... I really do appreciate..... From Sierra Leone
Much love from kenya
My first time here but this is exceptional! Planning to come for some musical instrumentl.
That's so educative. ....and what about adding others like the bass enhancer and the compressor. ...please I need a video on that too...
Coming soon
I appreciate the tutorial it's really professional
good explanations, on how to set up. the only thing I would do differently is plug power leads into equipment first and switch them off in case of sudden power surges.?
Thank you for sharing your experiences. Watching all the way from Vanuatu 😀😁👍🔥🔥🇻🇺🇻🇺🇻🇺
Big ups 💪 my brother much love from 🇰🇪
I have watched so many videos but I haven't seen a video that explains the way this one does.
Good and clear explanation of using both the EQ and xover thank,s bro i appreciate your video,support for newbies.
I like it, bro...
This is very important for some of us who are still learning
Very good job and very,very,neat and clean explain nice vodeo bro
That set up manipulate the pure sound & creates unclean signals, increasing unwanted frequencies going to the amplifier. But it works!
Keep it uu with this good Work. It's such an educative and resourceful video.
BOUGHT THIS CROOSOVER AT BAMBURI 3 DAYS AGO THANKS TO YOU
Thank you so much for this video. It really helped me.
very nice demo sir..but all your equipment has so expensive price in the philippines..thanks for the idea
You are welcome.
like the other brothers said short sweet simple cleared up lots of things for me thank you!!!
God bless you for sharing your knowledge with us.
But I you can give me the title and name of the artiste musica you play sometimes, i we be very Great. I want to downlode it.
Thanks
Thank you so much. You make it so simple
I didn't think it'll be profitable buh.. you beat my expectations love from naija
Much love bro
This is very educative and helpful. Can one bypass the amplifier if he is using the active speaker?
Hello Decibel Audio Kenya, am Samuel in Ghana and i love watching your channel. My church is having challenge with our church sound for many years which is reducing the church congregation. We have lots of equipment's (devices) but have challenge with our sound. We are using yamaha MG24/14FX mixer, dbx 166Xl compressor, dbx 231 graphic equalizer,MC100 sound enhancer, behringer multicom Pto-Xl audio interactive and dbx 234XL crossover... kindly assist me on how to connect these devices and and how to do the setting to get a good sound. Please help to build up mu church again. God bless you.
Excellent video for me as a bigginers👍👍👍
Wow! I love this! Masterpiece 👌❤️
Thanks for the love
Good work can you Doo connecting more than 2 amplifier or three which femalee will you usee
Osam brother tq for teaching blessed more videos
This is a great video indeed.... if i may ask... is it possible to setup like that but remove the equalizer. I have 2 EVO X215 full range speakers.
Yes very much possible
Thangs you. Bonaventure of Côte d'Ivoire/Africa
good video tutorial but i nees to learn more to understand. i got Peavey CS 3000, two times burn right channel because i was connected to power mixer.
Great explanation 😃 but some part are not really clear I think the camera 📸
Nice tutorial. On the output results the mid was to high. That was noise to me. I recommend reducing the mid volume from the power amp
Good job bro
Very impressively perfect 🥳👏🙌
How much do you sell that Peavey 4000
Good work bro, need to know the name of the song that your testing with, it has really blessed me.
Big ups from Ghana 🇬🇭
Excellent video thanks for doing this.
Mono leads or stereo leads
Good explanations..Love this 👍👍👍💓
Love from India Kerala bro❤
Just what I needed. Thank you so much sir for this. I do have one question though. How can you put the sub in one channel and mid in another in a left and right (stereo connection?)
Good job your video was so informative
Straight Outta Kenya! Cool video
Thanks for the love ...respect ❤️
I really appreciate this explanation. How can I connect with you? I'm in Ghana and I would like to learn more and prolly try to order from your store
Soon we are opening branches all over Africa ... we shall keep in touch
Great job sir, do you do practical teaching
question..could I also put a compressor in the chain? where would it go? perhaps before the EQ? also could the EQ and the compressor go in the left and right inserts?
absolutely informing Will visist your store for more
Good job! Though I would have loved to see you explain the various working modes of the feature-packed crossover namely mono 4-way, stereo 3-way, and stereo 2-way. Also, a 2-amp configuration if you want to achieve a stereo sound. Probably do another video soon. Which mode on the crossover were you using on this video by the way?
asante... I've never used an equilizer in a sound system but I sure know the goodness of having a crossover especially for the subs
so does it mean you can still setup like that but eliminate the equalizer and still have good sound?
@@nk-moza yes you can. Just connect signal cables from mixer to the crossover then from crossover to amplifier. Actually what really needs to pass through the crossover in such a setup is the signal you intend to send to your subs
You are only using one amplifier in this setup?
Can you do one where you have 3 amps for mid,2 amps for monitors ,2 amps for bass using graphic and equalizet and mixer.
This is great explanation, thank you sir
Thank you so much Sir for you teaching us...
One love from Sierra leone 🇸🇱
One love ❤
My question is what if you are using two 2 amplifier one subspeakers and one for main speakers and feedback
Amazing video and sound systems
very helpful .....so what if me have a separate pre amp where are how should i connect it ?
@DECIBEL AUDIO KENYA Can you give the name of some inexpensive USB mixers that are MIDI compatible and are able to control a DAW or other MIDI software?.
Lovely bro. I learnt alot from your vlog.
Awesome explanation...thank you..
Always the best decibel Maina thanks
My pleasure!
Hello, very good video. This niche has been untapped before ..so I highl recommend this one. Question though. At the back of the crossover, there are buttons. How do you know when to engage and what to disengage based on the frequencies to be implemented? Two way stereo, mono etc.
Hello, sterio means 2 mono means 1.. if in any case you are using 2 channels of the crossover then the sterio button has to be on, if its a single channel you need then mono it is..
As for the other frequency buttons, it's a regulation of the amount of power you need going in to your amplifier
Good job I enjoy and learn.
Thank you s much sir... You teach me a lot😊😊😊
Am humbled 🙂
Your lessons are helpful you got 5star for that.
Thank you glad they are helpful
Good work. Can you connect direct from equaliser to sub if you don't have crossover.
Yes. But the best EQ to do that is the Behringer ultragraph coz it has an option for the cross over at the back. So, you can connect your sub signal from there.
@@philemonbarasa okay thanks.
Nice explanation
one love from Namibia 🎉
Thanks bro this is very educative
The best explanation 💗💗💗
A good video.... Though it is more advisable to have rig the entire system first before powering on the hardware unit😇🙏
Hello I agree ..100 percent... Next time we put that in yo consideration
hello engineer I just want to know if we want to add a compressor, how can we connect that?
Hello sir can you please do a video of a mixer, equalizer, crossover and two amplifiers
And another video of a mixer, equalizer, crossover, compressor and two amplifiers
Will do
Best and cool. From Uganda
Hello i from Indonesian 🙏❤️🇮🇩
You are a good teacher
This is amazing thank you sir
Really understandable 👏
Nice explanation lakini hujasema kazi ya buttons zenye hukuwa kwa crossover and how they should be
We are doing a video specifically for.that
Nice one bro...simple and understanding... However, what if I want to connect 8full range speakers and 4 sub...How many crossover and equalizer will I need?
Just one equaliser and 1 crossover, you manipulate your signal buy either looping amplifiers or using a y cable
Thank you sir
Can an equiliser be used on a powered mixed with a crossover connections?
Great content sir 🙏🏽🙏🏽🔥🔥🔥🔥🔌
Waoo that is great 🇹🇿🇹🇿🇹🇿🇹🇿❤️❤️