Design an Infinite Logo Illustrator Tutorial

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ม.ค. 2025

ความคิดเห็น • 110

  • @Shambhavi_hu8
    @Shambhavi_hu8 5 ปีที่แล้ว +3

    Use Esc for releasing the pen tool...and to reflect..just click on the reflect tool...choose horizontal/vertical reflect and click on copy...simpler ways.

  • @paintedcrow
    @paintedcrow 6 ปีที่แล้ว +4

    This was helpful! But I cut out a few of the steps and I think it made the end result smoother, getting rid of the asymmetries I can see in the vid's result.
    I used the 45 degree angle from center trick on the four points where my lines would cross and deleted the center anchor point like the video does. Then I just connected those four anchor points with the pen tool to make the center cross. Then you just delete the segment in between the anchor points at the end of your new lines! No eyeballing where the tangent should go, no extra anchor points to delete the center part.
    This might not work if you want your center bit to be a bit curvier than you'd get from the 45 degree angle trick, so you'd have to find a different way to place your anchor points in the same spots. But if you got creative with a straight line or maybe a rectangle, and used Illustrator to rotate it to a certain angle, you could maintain your consistency by using it as a ruler. Then you could zoom way in to place your anchor points. Probably not the most elegant hack, but it'd work.
    You could also probably get away with dragging a guide down to where you want the top 2 anchor points to go, copying and horizontally reflecting the two circles so they overlap, dragging your guide down to where the flipped circles' anchor points are, deleting the duplicate, and using the guide to place your other two. This way's probably easier.
    Disclaimer, I haven't actually tried either of those because the 45 degree version works for what I wanted. But you folks are clever, I'm sure you can figure it out with some tweaking.

  • @leopoldfoto
    @leopoldfoto 8 ปีที่แล้ว +9

    I often try to make the figure without seeing your tutorial first.
    I startet with one line and reflected the line, so they cross one another. Then I put a circle between two lines on one side.
    Remove the oder side and reflect this part 180° and there is your figure without the need of a lot of small corrections.
    Just another way!

  • @maryorizapata487
    @maryorizapata487 4 ปีที่แล้ว

    Thanks Dansky, I am starting in Illustrator and I am not fluent in the language, the pedagogy to explain and make visible every detail to be able to carry out the activity were great! Regards from Venezuela!

  • @iFailGames
    @iFailGames 7 ปีที่แล้ว +2

    After watching your tutorials, I've taken up the habit of setting all my AI files to 1920 x 1080. Gives so much more room to work in, magnifications much more sensible, and so are the guides and stuff.

  • @Munhrar
    @Munhrar 4 ปีที่แล้ว

    The video is very good, of course, explanatory, no nonsense, you explain it very well, if it turns out to be boring, I can't speak English, I can pronounce some things in English, I can talk very little, but as incredible as it may seem, I didn't get lost in your video and I had subtitles turned off, when I didn't understand any part, I would stop back, see what you were doing, heard the explanation and do it the same way.
    Thank you helped me a lot.

  • @buterissimo
    @buterissimo 7 ปีที่แล้ว +1

    I stumbled in, thinking that I would just watch one of your tutorials to get the creative juices flowing for the day and 1,5h later realized I had watched at least 3-4 tutorials and completely lost track of time. Well done ;) I'm a fan, will come back to learn new skills (there's always creative ways, even when you think you know it all already!)

  • @mubinpathan9901
    @mubinpathan9901 7 ปีที่แล้ว +1

    I love your videos. You are really good at explaining things and features of the tools that you use. Most creative youtubers just skip that part or assume that people who are watching their videos are not noobs. You take good amount of time to do the work so that people can keep up with the pace of you. Keep up the good work. I really learn a lot from your videos. Best wishes for your future! :)

  • @premtripathi3269
    @premtripathi3269 6 ปีที่แล้ว

    your illustrator tutorials are awesome . helped me to vector art in just 15 days with much expertise .Thanks

  • @JewelryLadyAshley
    @JewelryLadyAshley 4 ปีที่แล้ว

    This was so incredibly helpful. Thank you for saying why you used certain commands, helps me learn.

  • @MadebyMighty
    @MadebyMighty 8 ปีที่แล้ว +15

    Very clear and to the point. Solid tutorial as always man. Cheers!

    • @collinjamal6644
      @collinjamal6644 3 ปีที่แล้ว

      i dont mean to be off topic but does someone know of a method to get back into an instagram account..?
      I stupidly lost my password. I appreciate any tips you can give me

    • @armanifrank7131
      @armanifrank7131 3 ปีที่แล้ว

      @Collin Jamal instablaster :)

    • @collinjamal6644
      @collinjamal6644 3 ปีที่แล้ว

      @Armani Frank I really appreciate your reply. I got to the site thru google and Im in the hacking process now.
      I see it takes quite some time so I will reply here later when my account password hopefully is recovered.

    • @collinjamal6644
      @collinjamal6644 3 ปีที่แล้ว

      @Armani Frank it did the trick and I actually got access to my account again. Im so happy:D
      Thanks so much, you saved my account :D

    • @armanifrank7131
      @armanifrank7131 3 ปีที่แล้ว

      @Collin Jamal Glad I could help xD

  • @pyne99
    @pyne99 4 ปีที่แล้ว

    Beautiful, Thanks Danksy I will try it out

  • @wajidhassan789
    @wajidhassan789 3 ปีที่แล้ว +1

    What is the function of expand tool. And difference between expand and expand appereance

    • @ForeverDansky
      @ForeverDansky  3 ปีที่แล้ว

      Expanding converts things like strokes and other effects into standard shapes whereby the stroke is no longer editable, and the shape will then have a fill colour instead. For example, if I draw a horizontal straight line it will be made up of two anchor points, after expanding the shape it will be made up of 4 anchor points and be treated as a regular 4 sided shape will a fill colour (rather than a line/stroke). Expand Appearance only expands the 'Appearance' effects that are typically added from the 'Effects' menu at the top of the screen. The main reason for expanding shapes is to finalise certain aspects and effects, that will enable the use of other tools and techniques - because sometimes if a shape hasn't already been expanded, future results may be undesireable. Hope this helps :)

  • @AZskylite
    @AZskylite 7 ปีที่แล้ว

    Reviewing": A powerful tool.
    Things I like about this video:
    1. Practical visual and auditory lesson format in English.
    2. Reviewing: Continuous reiteration of the shortcuts and their functions.
    3. Bite-sized steps for the beginner/intermediate to brush up or learn new AI pen tips.
    4. Bonus: Follow along in AI and make this useful vector for your own files.
    5. Mistakes were corrected in real time (4:11 min. "lock on" step).
    6. Thumbs up for:
    The rate of flow seems effectively paced, without extraneous verbiage.
    A smooth audio quality and voice volume range. Bonus: Nice accent.
    The author addresses comments and questions in an interactive written format.
    ADHD *user-friendly (no background noise or music).
    Subjective detail observations to consider:
    1. An unknown factor: *View window of the author speaking.
    Q: Might it be an optional selection? See ADHD.
    2. Providing a text (link?) of numbered lesson steps in an outline format (cheat sheet).
    3. For the beginner: Further clarification at 3:18 min when lines of "X" are connected to the circles and 5:32 min. when selecting four new anchor point placements that line up with each other?
    Smiles,
    Constance
    PS
    Dear Dansky, (I doubt many will read this far, so this is for you).
    Your professional ethics are showing when you respond to heated criticism with poise. This is a hard room to work!
    RE: Reviewing
    Educating via written format is a method that I use to help with my referencing and understanding of content. You need not keep it in your comments if you do not wish to.
    I welcome your feedback also.
    Keep up your good form!
    Smiles,
    Constance
    (Former medical laser application specialist, post-secondary college instructor and RN.)

  • @AyatArabMultimedia
    @AyatArabMultimedia 3 ปีที่แล้ว +1

    This was so incredibly helpful. Thank you,,,,,,,,,,,,,,,

  • @StorylineZurich
    @StorylineZurich 6 ปีที่แล้ว +1

    Really great job, Dansky. Thanks so much!

  • @bayudewantoro9954
    @bayudewantoro9954 5 ปีที่แล้ว +1

    11:08 whats shortcut to put shape on the backward?

    • @ForeverDansky
      @ForeverDansky  5 ปีที่แล้ว

      Go to 'Object' --> ' Arrange' and all the shortcuts are listed here :)

  • @yummyzone89
    @yummyzone89 4 ปีที่แล้ว

    Thank for making this tutorial

  • @hometutor55
    @hometutor55 3 ปีที่แล้ว

    Thanks

  • @reynaldobonilla9881
    @reynaldobonilla9881 3 ปีที่แล้ว

    I got a quick question then brother. I really hope you can help me out when I try to click on window in my images and I try to do image trays it doesn't select what do you recommend me to do?

  • @majidtahiri8971
    @majidtahiri8971 8 ปีที่แล้ว

    Thanks Dansky , I really love your tuts

  • @soufianemoulnaivia5641
    @soufianemoulnaivia5641 4 ปีที่แล้ว

    thank you so much for this tutorial

  • @vanilsilveira4395
    @vanilsilveira4395 3 ปีที่แล้ว

    Bom dia! Trato feito dos USA. Vocês também compram selos personalizados dos Correios?

  • @nickzhu8908
    @nickzhu8908 7 ปีที่แล้ว +1

    Love your tutorial so much!!!

  • @timothyassam6259
    @timothyassam6259 6 ปีที่แล้ว

    Very Clear Design

  • @mohamedhasssn9021
    @mohamedhasssn9021 5 ปีที่แล้ว

    Awesome tutorial dude !

  • @hardboiled2000
    @hardboiled2000 8 ปีที่แล้ว

    really brilliant way to teach concepts dude

  • @AZskylite
    @AZskylite 7 ปีที่แล้ว

    Dansky,
    At around 3:00 minutes you start connecting the four ends of the middle "X" to each circle. At this point, I wondered how you were deciding where each connection would be (to have them line up). Might I use guides or a rectangle imposed here to determine the correct spacing of these four connections? Does the program have any other tools to make this happen?
    Thanks!
    Smiles,
    Constance

  • @vitalvois
    @vitalvois 8 ปีที่แล้ว

    Hi, Dansky! Thank you for your lessons!

  • @tauhidhasan9073
    @tauhidhasan9073 6 ปีที่แล้ว

    how did you set the pink color on background....?

  • @akashdeshpande
    @akashdeshpande 7 ปีที่แล้ว

    Awesome! This workflow is helpful.

  • @aalianazish8160
    @aalianazish8160 4 ปีที่แล้ว

    Very brilliant 👍

  • @aliabid658
    @aliabid658 8 ปีที่แล้ว

    Thank you for this video . Very helpful to me !!

  • @roronty_1122
    @roronty_1122 4 ปีที่แล้ว

    Thank you so so so much.

  • @yellow155
    @yellow155 5 ปีที่แล้ว +3

    You could've just made a perfect square, rotate it by 45° and completely round off all the corners except the right one. Then duplicate it and reflect it vertically.

    • @adymanuel6465
      @adymanuel6465 3 ปีที่แล้ว

      Well now you have two ways of doing the same thing.
      Which is awesome.

  • @md.shorifulislam8366
    @md.shorifulislam8366 4 ปีที่แล้ว

    Excellent !!

  • @monicagruber5232
    @monicagruber5232 8 ปีที่แล้ว

    Amazing, I love your videos, they are too useful!!!!

  • @chuanjianma7526
    @chuanjianma7526 7 ปีที่แล้ว

    Many thanks for your works, including play by play talking.

  • @mahtabkavosh
    @mahtabkavosh 5 ปีที่แล้ว

    I learned a lot thanks

  • @JoeBodego
    @JoeBodego 8 ปีที่แล้ว

    Nice one mate, thanks

  • @AZskylite
    @AZskylite 7 ปีที่แล้ว

    Dansky,
    Very helpful. Thanks!
    Smiles,
    Constance

  • @Imsofreshx
    @Imsofreshx 7 ปีที่แล้ว +1

    Very good tutorial! Keep it up my friend :)

  • @avkinfinitokva5021
    @avkinfinitokva5021 8 ปีที่แล้ว

    teacher thank you for the tutorials and congratulations for the channel, I have a doubt. after we finish our work or creation, how can we save ?

  • @BouncingDande
    @BouncingDande 7 ปีที่แล้ว

    hey man its been 2 videos where ive tried to Unite but every time my shape gets distorted.. any ideas?

  • @whatsciencesays8348
    @whatsciencesays8348 8 ปีที่แล้ว

    Hey @Dansky, is there a way in illustrator to make a gradient follow a line or a path?
    In your present tutorial, for instance, the gradient goes left to right. Would it be possible to apply it from a starting point to the other end?

  • @vasatbey
    @vasatbey 8 ปีที่แล้ว

    Thank you again

  • @tinumathai1080
    @tinumathai1080 8 ปีที่แล้ว

    Sir, pls do a video of how to make custom gradient

  • @simrajsingh1932
    @simrajsingh1932 5 ปีที่แล้ว

    Super easy to follow, thanks Dansky!

  • @CarlCabralEntertainment
    @CarlCabralEntertainment 8 ปีที่แล้ว

    very helpfull, thanks!

  • @hishamalaoui
    @hishamalaoui 8 ปีที่แล้ว

    Thank you

  • @hemshanth9407
    @hemshanth9407 4 ปีที่แล้ว +1

    I tried all of your videos and none of it worked at some point there will be an issue. Did that happened to anyone?

  • @mdmonirmondol7814
    @mdmonirmondol7814 2 ปีที่แล้ว +1

    Thanks you..

  • @MiguelOliveira-hs6hx
    @MiguelOliveira-hs6hx 8 ปีที่แล้ว

    Nice tutorial Dansky. :) Could you make a tutorial working with material design icons from google materials? I can not arrangement well (change colours, height, width) in png and svg format. Thank you so much Dansky and continue to your brilliant tutorials :)

  • @letycialobato9456
    @letycialobato9456 7 ปีที่แล้ว

    3:56 = It's CTRL+A?? I don't understand.

    • @mrtvakOnaj
      @mrtvakOnaj 6 ปีที่แล้ว

      It's Ctrl + Y on windows

  • @srileshnair4968
    @srileshnair4968 7 ปีที่แล้ว +1

    Perfecto!!

  • @senemkozak7021
    @senemkozak7021 8 ปีที่แล้ว

    Dansky thank you :)

  • @eurossocial
    @eurossocial 8 ปีที่แล้ว +3

    Great Tutorial, But I didn't understand the purpose of the "Global" color yet..

    • @ForeverDansky
      @ForeverDansky  8 ปีที่แล้ว +5

      th-cam.com/video/TTUHotspYkk/w-d-xo.html

    • @eurossocial
      @eurossocial 8 ปีที่แล้ว +1

      Dansky Thank you very much. :-)

  • @mohamedakl9159
    @mohamedakl9159 7 ปีที่แล้ว

    That is aweeeeesome

  • @dSublime8
    @dSublime8 6 ปีที่แล้ว +2

    Is it legit to.use gradient in vector graphic logos, i always use normal.colors i.was scared to.use gradient becsuse i thought it is raster 😏

    • @ForeverDansky
      @ForeverDansky  6 ปีที่แล้ว

      Absolutely you can use gradients! :)

  • @wzguitar
    @wzguitar 8 ปีที่แล้ว +8

    too bad illustrator doesn't even have a Line tangent to arc (circles) function. you think that would be something very basic for a design tool..

    • @AutoKay
      @AutoKay 6 ปีที่แล้ว +1

      Indeed... It's so much easier in a CAD software... Hope Autodesk comes with Vector graphics tool

  • @IGhaDah
    @IGhaDah 8 ปีที่แล้ว +2

    شكرًا = thank you

  • @loregmz
    @loregmz 5 ปีที่แล้ว

    Hahaha watched it till the end 😂
    Great video 👌🏻👌🏻

  • @hhvgddcjb
    @hhvgddcjb 8 ปีที่แล้ว

    a little confusing, but really good.

  • @tenshowmedia3627
    @tenshowmedia3627 4 ปีที่แล้ว

    good idear

  • @anika6558
    @anika6558 6 ปีที่แล้ว

    WHY DO U MAKE COMPOUND PATH ...... HERE PLS

  • @aneesshaikh739
    @aneesshaikh739 8 ปีที่แล้ว

    hi can you help to make a logo of my name

  • @TheOverlordOfProcrastination
    @TheOverlordOfProcrastination 6 ปีที่แล้ว +1

    Great vid, but nobody EVER explains what 'expand' means for us dummies.

  • @nagalaxmirenu9217
    @nagalaxmirenu9217 5 ปีที่แล้ว

    Nice

  • @stinkleaf
    @stinkleaf 6 ปีที่แล้ว

    similar to making a metaball

  • @vanilsilveira4395
    @vanilsilveira4395 3 ปีที่แล้ว

    Bom dia! Minha arte esta nos selos personalizados dos Correios , desde 2003 e confesso que não copiei de ninguém. São os únicos no mundo, em uma única cartela com 12 selos. Olá mercado filatelico!!!

  • @caroltafuri
    @caroltafuri 4 ปีที่แล้ว

    I love this english accent

  • @nilesh6889
    @nilesh6889 4 ปีที่แล้ว

    Video is very good.... But the procedure is too lengthy, that could be done in half of the taken time..

  • @ABelfakirVlogs
    @ABelfakirVlogs 3 ปีที่แล้ว

    just F A N T A S T I C

  • @anika6558
    @anika6558 6 ปีที่แล้ว

    DEAR DANSKY NICE VIDEO BUT HOW DO U MATCH CENTER ARROW WITH CIRCLE STOCK ..... MAKE VIDEO MORE CLEAR ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, MORE CLEAR

  • @denap.2811
    @denap.2811 8 ปีที่แล้ว +8

    Hi. I am a fan always like your videos but I am not a fan of the new inset of you talking . I think it is a little distracting.

    • @ForeverDansky
      @ForeverDansky  8 ปีที่แล้ว +15

      Hey Dena, thanks for letting me know and I really do appreciate the honesty in your feedback. I'm trialling on-camera recording at the moment for a few reasons, to help build my confidence on camera and also get me ready for more regular live-streams and other upcoming videos. Perhaps if I was smaller in the corner it may be less of a distraction? :)

  • @әкрәм
    @әкрәм 3 ปีที่แล้ว

    Ayyildiz Infinitix Member

  • @gigihhalim
    @gigihhalim 3 ปีที่แล้ว

    You really have moved on. After a tragic loss and an annoying adventure with Sherlock, you do graphic design now. And it's quite promising, I suppose. I hope Rosie likes it. Well done

    • @ForeverDansky
      @ForeverDansky  3 ปีที่แล้ว

      Who's Rosie? 😂

    • @gigihhalim
      @gigihhalim 3 ปีที่แล้ว

      @@ForeverDansky she's john watson's daughter in bbc's sherlock

  • @galaxyxplayz4055
    @galaxyxplayz4055 5 ปีที่แล้ว

  • @alexander_richter
    @alexander_richter 7 ปีที่แล้ว +11

    Not a perfect tangent line. Very unprofessional

    • @ForeverDansky
      @ForeverDansky  7 ปีที่แล้ว +1

      Alexander Richter Thanks for your feedback :)

    • @alexander_richter
      @alexander_richter 7 ปีที่แล้ว +4

      Dansky Dansky if you do this by hand it might look good at first but if you print it on a big poster you might see an edge where the line touches the circle. And even if you can't see it mathematical imperfection would still exist. This wouldn't be acceptable if you do this professionally. You should use a script (that calculates perfect tangents to points on cicles) for this.

    • @Bufishawt
      @Bufishawt 7 ปีที่แล้ว

      That's true. Those are very useful plugins that fill up such gaps in Illustrator's native toolset.

  • @ibooezkan9260
    @ibooezkan9260 6 ปีที่แล้ว

    lplop Nice!

  • @marufahamed7376
    @marufahamed7376 8 ปีที่แล้ว +1

    Its so not good.

  • @yasin_uyghur
    @yasin_uyghur 8 ปีที่แล้ว

    thank you