Single Bevel Broadhead Sharpening Easy
ฝัง
- เผยแพร่เมื่อ 7 พ.ค. 2023
- Sharpening Single Bevel broadheads can be a bit daunting. Oh, but the RF has found one of the best tools out there. Worksharp Precision Adjust!!!
Worksharp tools: www.worksharptools.com
Bare Shaft Tuning in Detail: • Bare shaft arrow tunin...
Arrow Testing Podcast with The Hunting Public: • ARROW PENETRATION TEST...
Dumpster Shooting, Arrow Penetration, Kinetic Energy, Ballistic gel Playlist click below!
• Broadhead and Arrow Pe...
Ashby Bowhunting Foundation Cape buffalo Testing 2021 - Scroll to bottom: www.ashbybowhunting.org/suppl...
Great Products to build an adult Arrow system:
Ranch Fairy Store: siriusarchery.com/rf/
Magnus Broadheads:magnusbroadheads.com/single-b...
Sirius RF Arrows and RF test Kit: siriusarchery.com/ranch-fairy/
Ranch Fairy Field Point Kits: siriusarchery.com/product/ran...
Adult arrow binge list
1. Heavy Arrow Handload Video: • Bare shaft arrow tunin...
2. Bare Shaft Nock Tuning: • Bare Shaft Nock Tuning...
3. Fletched Nock Tuning: • Nock Tuning Fletched A...
4. Unpredictable Blood Trails: • Bloodtrails are NOT Pr...
5. How Broadheads Kill: • How Broadheads Kill
6. Broadhead Penetration Basics: • Broadhead Penetration ... - กีฬา
If you can convince them to make a clamp that will hold a broadhead square, they’d sell these things like hotcakes.
I was just about to comment the same thing. I would definitely get one when that happens.
The kme delta clamp???
More likely to get a smaller guy to make an aftermarket part, like the delta clamp
Stay sharp guides do too. They are cheap and easy as hell to use.thy have the corner cut off so you put the head in woth an angle and the blade matches flat to the diamond plate.
@@michaelbushey2787 only problem I had with the stay sharp ones was the holder was too thick when I got it, burnt through a diamond plate before I realized why it was taking so long💀
Been using this sharpener for almost two years, really does work well. Had a kitchen incident last Tuesday that required 7 stitches. The doctor asked how I keep my knives so sharp. He is dropping off his knives this week for a tune up. Hoping that WorkSharp sees the value in Broadhead sharpening and finds a way to hold the Broadheads a little better to keep from hitting the ferrule and/or clamp.
Nice work 🤙🏼
I have one of these and I have been playing with it for single bevels. This is a great tutorial
I own one of these sharpeners. I’d always considered trying to sharpen broadheads with it. Now I definitely will! Thanks Ranch Fairy!
I have one of these , and this is the Perfect application for it ! I have a larger fancier version , but takes up a LOT of room. So I purchased this little guy. However I really prefer the larger for knives , SO HAPPY to have the perfect application for this fine little tool. FYI Gritomatic has a cheap little brace you can add under the arm that removes the bit of flex that hurts consistency. I found that a Big improvement. Thanks Troy
I love my WS sharpeners! I don't have that version...yet. I'll be watching for the RF edition. Thanks for sharing.
Purchase the precision adjust works great on my hunting knife and now onto my broadheads. Great informative video
I'm all about scarry sharp broadheads and I appreciate the content. No more stropping? No more single bevel? I'm sure this tool works great given the time to use it. I personally don't see anything being quicker, easier and more precise than a KME (with appropriate jaws) glass surface, varying grits of wet sand paper and cardboard with polishing compound. Thanks again Troy!
I just bought the work sharp elite model. Hum does fantastic job on grizzly stick Masai, 200 single beveled Broadhead. Upon your infinite wisdom, and your advice on how to properly sharpen a single bevel Broadhead. I experimented with interpretation of screwing this up. Mind you grizzly stick puts out a very good Broadhead/not cheap. And they came out. Oh my God razor sharp. Thank you ranch fairy. Thank you very much.
I suck at sharpening broadheads, I've struggled for years, tried stones, fine sandpaper, stropping etc. and I'm just bad at it. I got this last night and spent more time than i care to admit using this trying to get the angel right etc. I got it worked out on day 2 and now I have one side of a double bevel broadhead shaving the hair off my arm! Thank you Troy! Now just got to do the other side then hit the rest of my broadheads.
I just ordered my Elite. Cannot wait to use it for Broadheads and for my butcher knives/field dressing knives.
Thank you so much Ranch!
They are fantastic
This device is a big difference maker in sharpening single bevel broadheads. I'm a big knife guy and know how to sharpening knives properly. With two cutting sides it's fairly easy but when there's only one side it gets a little more difficult, not really difficult but more time consuming when doing it by hand. And with a single bevel you have to be very precise, you don't have that other cutting side to give a little forgiveness. This device gives you that precision. Great video and glad you made it cause I don't know if I would've found this device on my own.
I ❤ my Work Sharp I wish I had bought it long ago!! All my knives and broadheads (ones I can sharpen with it) are sharp. 👍
This is a very comprehensive video of sharpening your B head. Thank you sir. Great video.
Ranch Fairy is spot on, this type of sharpener works great for single bevel broadheads. I've been using a lansky on grizzly breadheads for years. It just works!
Thank you for what you do I always knew my arrows and brod heads should do better never used flappers
Great video. I'm changing over to the iron will single bevel and looking forward to seeing how sharp I can get them. Thanks for your time Troy. 👍
Let me know how you made out if you bought this system. I use IW’s and have the KME. Does a good job, just takes a bit of tinkering to get the right angle. The tiny bleeders can be challenging to
@@CJ-jd6qv So far they are fantastic. Heading out tomorrow morning for mulie. I got a few deer in the area and hopefully I'll get the chance to fill my tag over the next day or so. If I do, I'll let you know. But for right now, my arrows are flying very straight and as efficiently as possible. I just used my strop to touch them up and they are ridiculously sharp.
Thanks, I am looking forward to your double bevel sharpening demonstration.
It’s the same
Don’t change angle!!!!
I have a TSPROF sharpener and that’s what I’m planning on using once I get my single bevels.
Your shirt! Man, you are epic! 😂😂😂
Wear it all around town!!
I have the kme system and it works great to
Holy Crap! That's Awesome brother! ... 😎👍
Troy, this is crazy. I was just looking at some different sharpeners and was going to call you for advice😅
There ya go!!!
Would love to see the double bevel process thanks Troy
I just ordered mine
I’ve messaged them about making a broadhead attachment for this sharpener as I love it, but no response. Great vid!
No need!!
Thank you for finding this product. Cheers. You can Fairy at my ranch anytime.
I have this sharpener, and I agree that it works fantastically for my Cutthroat single bevels, as well as my VPA double bevels. However, I was not able to sharpen the VPA single bevels on the system, because they have a 35° sharpening angle.
I had some alien broadheads that I had the same issue. And I was not about to regrind 12 tool steel edges to 30°! That would have taken a day and an age.
My lanski nife sharpener very similar too this works like a champion 🏆
Lots of 3D printed kickstands to make everything extra stable. I use the heck out of mine and everything in the house is crazy sharp.
I’ve been thinking about getting this guide. I think I could make the KME jaws work to hold the broadhead square.
I like it ive been wanting something easier than just hand and eyeballs but after a while that gets hard to beat but this makes it so much more consistent especially when you have to recut the bevel for some reason other than just getting an edge on it thanks promo code in the near future?
You are correct!! That's why I waited so long to post a how to video on tools for sharpening broadheads. Nothing was really top notch.
That is solved.
I must hear puppies n see candy, before I get in the van
Hey yall, you can also sharpen iron will single bevels on it. Start at 30 degrees with a 320 grit. That sets new bevel to 30 instead of the 34 it has. Once you have new bevel take it out the machine an lay flat on your stone to strop the flat back side. I use 320 to 600, to 800. It will shave hair at this point.
Will we ever see a worksharp and ranch fairy collaboration to design a clamp that holds broadheads specifically? That would be awesome.
Working on that.
I just bought this sharpener and some of your broadheads, i hope they treat me well.
okay i got both the boradheads and the workshop sharpener, i tried to sharpen a knife and failed.... i am not sure what i am doing wrong. The vise on this sharpener sucks balls the knife just moves around no matter how much i crank it down.
I got mine. I agree completely
A little window cleaner will help lubricate and clear the metal from your stones also a little tip I learned from Paul Sellers hand tool woodworking channel I learned how to sharpen from him and everything I have with an edge is scary sharp
Well crap, gotta go spend some more money...🤣😂
Awesome tool. Awesome video! Thanks for insight!
Mine just came in!
Work sharp is a awesome company and I love there products. They have a new sharpener out that I want but they keep selling out lol
Have you tried the Ken Onion Elite Belt Sharpener? Makes super quick work out of sharpening and polishing broadheads. Stupid easy to use too.
If you put pressure on the blade the plastic holder will push away. That’s why your sharply may was whipped away at the to and not smooth throughout. It took me a few times of practice to learn that.
Yeah, I forgot to mention that!!
Took your advise and man my single bevels have NEVER been mirror finish, razor sharp, best I've ever used yet... one note VPA's 300 grain single bevels are cut at +30° and i would need to reprofile... with that said, ALL my Grizzly Sticks and DirtNaps are sharper than ever.
I watched the WorkSharp's video working on the Worksharp Precision Adjust and they were comparing the different strokes (ie push, pull, saw and sweeping stroke), they found the push stroke came out as the sharpest (that being said all methods created a sharp blade). What's your thoughts on just the push stroke until you get to the strop?
I know he said 32 degrees in here but the clamp only goes to 30. I'm currently shooting iron will single bevels which are 32 anybody have any experience with these working with this sharpener. thanks
If the cutting edge is not square to the clamp as the sharpening stone moves toward the tip of the broadhead the angel changes so your changing the angle of the cutting edge from front to back setting it in the clamp that way. The broadhead needs to be clamped as parallel as possible to the clamp to keep an even angel across the whole blade
Yes, but even if you change the bevel angle a bit, once you do it that way, it's set. Still works great.
could you machine a slot in the centre of the clamp jaws so the thread goes inside and you clamp each jaw either side. would it still work would mean your sharpening on the angle then which may be too much
What about 32° on the Iron Will single bevel? Will it get above the 30° mark?
I have Iron Will solids and single bevels, this sharpener looks amazing. Looks like Iron Will would be right on the verge of working with this having a 32 degree angle. Does anyone have experience trying this on Iron Will heads? Thanks
Can you sharpen the magnus black hornet with this?
Just got this sharpener. Used to sharpen tuffhead evolution 28 degree single bevel. Took awhile to get first edge sharp but after I got it down second edge was done in minutes. Only thing I had to do diffent was the 28 degree mark on the tower wasn't getting full bevel, moved to about 26.5 degree and it was perfect.
Do you strop always? Even after ceramic?
Remember with diamond sharpener items to use the entire face or move to different sections as you go. You will wear them uneven if you don't
I'm not a bowhunter but I am a precision trim carpenter looks like that'll work
it's super easy
Serious question.Would you not be better off to hit the bevel edge on the machine then take the broadhead out of the guide lay it flat side down on the stone and grind off the burr to keep it a true single bevel
Great video I was wondering about this. How do you feel about the other worksharp sharpeners? Do you think the Ken Onion "Knife and tool sharpener MK2" would work?
Fact is, I've not tried it. So I don't know.
I’m trying to sharpen new RF Broadhead’s and I have my tower maxed out as high as it can go and I’m still only hitting at the top of the bevel? Did they change the blade angle since this video? I don’t want to have to grind thru this far. Has anyone else experienced this either the RF heads?
Nice vid!! Do you know the bevel angle of the new Magnus 150gr single bevel? Thanks
So do you think this will be okay for broadhead that have a curve like a kudu point?
The pin at the end of the stone, Will that pin attach to the base from the top instead of the bottom? It may increase the angle a bit more for the heads that are above 30°. I have a couple that are 35° and would love to have a sharpener like this one.
Been using it for years. Took some practice but can't go wrong for the price
Will it get sharp enough to shave hair?
A pencil eraser works really good to clean that ceramic with.
Can you tell me if this will work with an Ironwill single bevel? they claim 35 degree I believe but I bought one of those other clamp tools that you spoke about in the past and it seems to be off a little bit.
I have the less expensive version, and I feel like I struggle with curved surfaces. Do you have any tips?
Convex or concave require basically the same technique: you have to move in one fluid motion across the blade, without focusing on one spot more than the others. It's more of a sweep across the length of the blade than a drag up and down against the edge.
I sharpen a lot of knives. It's something that you'll feel once you get it right. Some freaking Mr. Miyagi stuff but the blade will tell you what it wants. It'll make sense based on the shape of the blade.
Also, pick one stone or a set for curved edges. The corners or edges of the stone will be rounded over time, or the center will wear out faster. That will work better for curved blades and not very well for straight edges in the future.
Could this be used with the magnus single bevels? The are rounded at the front and not sure if that makes a difference.
Currently shooting Magnus stingers and I love them. Would this work with them? Likely to get it anyway because I’d like to get some single bevels.
th-cam.com/video/TP5-ISX3Xdw/w-d-xo.htmlsi=M008K7XuV2dA_f63
Good stuff! I have some Single Bevels laying around that have a 35 degree bevel, do you think it would be okay to set that tool to the 30 degree setting and re-bevel them the small 5 degrees? Thanks!
id put the tower as high as possible (bevel side) - I think it will do 32. But yeah, grind them down. Once it is set, you're golden. Id put a spacer under the clamp so it doesn't flex around while you're grinding.
Good video man thank you
So does that only go to 30 degrees because iron wills are 32 degrees
So I get that the sharpener is good at being consistent, but this is technically not a single bevel correct? It's a single bevel profile for 95% of the broadhead but the edge itself is double bevel.
Is this just because of the coating that you don't want to grind it off to get to the burr from a flat surface to keep the single bevel?
With something like an Iron will where I can take the ferrule off would I have the same issue?
Is this that much more consistent than a rolling clamp?
i have the Grizzlystik KME sharpening sytem if anyone wants to buy it
When will the rf 200gr broadheads be available for sale and will they be sold at serious archery or else where?
Sirius Ranch Fairy store. Memorial Day.
*havent finished vid yet* - hmm, VPA's 2nnd grain SB are sharpened to 35 degrees, sad this is maxed at 30 it seems
I played with VPA - just set the tower as high as you can get (bevel side) and cut the bevel down a couple degrees. Or tell VPA to reduce their bevel!!
The Worksharp website says it can sharpen serrated blades. Would that work on the Ser-Razor blades from Magnus?
Yes.
Troy, do you still strop after the ceramic stone?
I do.
Troy can you do a bear archery razorback broadhead review please
They were supposed to send me some. I am sure some other channels will play with it and they will likely say "is great!"
On the RF channel I might say its not great, I might say its great.
BUT not until I test it.
@Ranch Fairy there doesn't seem to be any that does that kind of extensive testing as you might.
Will this sharpener work on your 3 blade broadheads?
no. I have a video on that. 3 blades are much easier!
The pilot cuts are at 33 degree. Would pushing this up to max hit close to that? I just can’t get them shave sharp with this
Most likely not. You can reset the bevel to the max height with this, essentially lowering it.
@@RanchFairy Thanks for that, I'll give that a try. So far they aren't bad but just not scary sharp. Cheers for the vids!
I have the professional precision would that work for my Tuffheads since the stones are 1” wide ?
ya
@@RanchFairy thanks brother! Keep up the great work!
RF! Does it work with a curved blade like the 200 grain Maassi?
Absolutely.
No shit. Going to purchase straight away after work. I get them scary sharp on my stones but it's not an "easy" process. Thanks btw. You got me started on the high foc an weight total arrow weight is 676 grains 150 grain ethics outsert and 200 grain broadhead. It's a killer
@@solidtru9496 Inertia and sharp adult broadheads!!
Exactly which version is this one?
It is the precision adjust elite. But I modified one of the stone sets to match the precision adjust.
Tower is exactly the same.
Will the work sharp work on Simmons shark broadheads
I don't think so.
Bummer
So I bought $200 worth of your broadheads after watching your videos and sharpening with the work sharp. I do love your videos and agree with all you say but the work sharp is set at maximum 30 degree and your broadheads are 35 degree. It sucks changing that angle. I just hope they’ll perform once changed. Once again I love your videos just wasn’t expecting the drastic change in angle
If you don't have the time or skill to hand grind like I do, get a jig like this. Knife sharpening was my first marketable skill. I have about as much time sharpening knives as I've spent shooting arrows. Get a series of stones and strops. They don't need to be expensive, they just need to be consistent. Strops are cheap, and so is stropping compound. That's where you'll do your trial and error, and not more the expensive stones.
And test your edges. Run your thumbnail against the length of the edge and feel for nicks and chips. See if it shaves hair off your arm or leg. Does it drag and cause burn? Or does the hair just pop off without resistance? If you cut paper with it, can you make sharp angles and intricate shapes or can you only cut clean in a straight line? That's how you'll know if it's sharp.
doesn't look like it will accommodate 3-blade broadheads ... ?
Nope
See my 3 blade sharpening video. Super easy.
Wouldn’t it be just as easy when your ready to knock the bur of the back just take it out of the clamp and lay it flat on the stone
You can. But ya gotta remember people have different skill sets. So this way is pretty straightforward.
They just need to make a device for 3 blade single bevel
Anybody near Columbus Ohio that knows how to do this well that would be willing to hang out give me some. Guidance
back bevel is strongest. Naturally.
😞 Promo sm
He keeps speaking of a bird....I'm still looking for it
*** doesnt work for vpa single bevels ***
But has worked for a lot of others
I played with VPA - just set the tower as high as you can get (bevel side) and cut the bevel down a couple degrees.
@@RanchFairy or you can up grade to a bench top grinder like I did.
Your saying iron wills arent adult broadheads? They are 32 degrees. And why are you talking about sharpening the back side of the broadhead? Your turning it into a double bevel that way arent you?I get get you have to break the bur off but you should keep it flat to break it so you don't make another bevel on the back. I will stick with my stay sharp guide and my iron wills. But I still love your videos.
I don't remember talking about Iron Will (I did say if bevel is over 30 degrees this tool won't work....guess honesty isn't a thing. So I guess I'll have to watch my own video.
And the compound bevel was COMPLETELY discussed. There is even a picture.
WOW! You missed on that one. Put simply. a little bit (tiny bit) of a back bevel while remaining completely consistent......gets sharp and toughens the edge (This was discussed) and is supported by the tactical knife folks for durability....(that was also discussed.)
You and the brand X sharpening jig folks need to stay in your lane. If you're NOT removing your single bevel from the stay sharp (which you didn't say) AND hand sharpening the flat side (yes I know this is the optimal way)
Start a you tube channel and show us how!!!
😂
Man, this is such a frustrating video instead of talking about how to sharpen single bevel broadheads on a worksharpener. There's 20 minutes of just yacking about the same stuff over and over talking about double bevels, and this and that stick to the topic man for God's sake!! 😭🥴
If I don’t “yak about other broadheads” people won’t understand it’s just single bevels. You can just move on to other guys and get help from the industry cool guys. There’s plenty of channels and currently you have freedom.
I already got that sharpener. LoL but you’re gonna have to give me one them broadheads if ya wanna convince me 😂
They'll be for sale later this month. You can have all you want!!
@@RanchFairy jokes aside , I did get that serrated black hornet per your recommendation. And I been quite satisfied. But I think I wanna try the 3 blade you mentioned.
@@voxpopuli905 Ranch Fairy 3 blade in stock in the Ranch Fairy store (google that) Memorial Day
I sharpened my black hornets with this same thing last season
It worked well in the black hornets? I was wondering about that.