Spark Gimbal Overload

[@captainkickoff3565]

It happened on mine all of sudden gave ot a good blow and gently moved it all around and its not said it since .. alit of people say its comes on out the blue then goes off

[@pedrocarranza3295]

I have the same problem. I crash my spark. In youtube there are videos about this problem whit the gimbal overloaded of the mavic pro. The solution is change the ribon cable of the gimbal. But i dont know if it is posible whit the spark.

[@eduardongc]

Hi, I have the same problem, how solve it? Thank you

[@chainwood008]

same case with my dji spark, how to solved this problem???????

[@valentinconstantin8070]

Jörg Lennertz

I face the same problem and I found THIS bY Jorg Lennertz >>>> Turn the spark on the back and start it. After a few seconds, the gimbal is centered and you can turn the spark back and the gimbal works correctly.
You have to do this every time when you start>>>>>>>>>.I did, so IT WORKED !!!

[@valentinconstantin8070]

Jörg Lennertz
I face the same problem and I found THIS bY Jorg Lennertz >>>> Turn the spark on the back and start it. After a few seconds, the gimbal is centered and you can turn the spark back and the gimbal works correctly.
You have to do this every time when you start>>>>>>>>>.I did, so IT WORKED !!!

[@RiversideEM2]

Any luck fixing this?

[@iankhaledtoreto7523]

hi how can i contac you kc yung spark ko bigla nalang nakalas yung battery habang pinapalipad ko kaya nahulog tpos nabasag yung base nung camera kaya nung dinikit ko nag ooverload

[@CRPFilmsChristianRaymundPastor]

Pano nyu to na ayos??

[@CRPFilmsChristianRaymundPastor]

Di na kasi gumagalaw ang camera nang spark q?

[@stussyhuff]

Yes poke the gimbal. That will fix it..

[@hendranandradrone7064]

#good

[@TATUCO69]

flat cable. use phiton progran for calibration gimbal via usb

[@marcosantonioalves5309]

Hello friend, can you tell more about this program? where can I find it?

[@joeyjacildone4500]

It’s 6,962.032 payso for spark camera

[@thomasjacobolisa7720]

May mga dust po na nagaccumulate sa gimbal. Nilinisan ko lang po yung akin ok na

[@erickboy6611]

San pwede pagawa?

[@rcvictoryworld6354]

Hi Sir, you can drop off here at LG-08 Alfaro Place 146, L.P. Leviste St., Salcedo Village, Makati City.

[@Wazarse84]

I have seen in the start you egnore the update sir..

[@ivanmorato2875]

Saang location yan?

[@rosellesantos2335]

Nasan ang inayos mo don

[@joeyjacildone4500]

that’s a gimbal problem , y u don’t fix it instead of playing the gimbal with finger, lol

[@Reddirtrelichunters]

joey jacildone how does one did or how much would something like that cost asking for a friend.

[@joeyjacildone4500]

find a used one online eBay has it

[@joeyjacildone4500]

or fix it yourself, it’s not hard

[@CRPFilmsChristianRaymundPastor]

How to fix this??

[@joaonetodrones5913]

Oops, you can solve this problem, my being with this same problem tbm kkkk

[@valentinconstantin8070]

Jörg Lennertz

I face the same problem and I found THIS bY Jorg Lennertz >>>> Turn the spark on the back and start it. After a few seconds, the gimbal is centered and you can turn the spark back and the gimbal works correctly.
You have to do this every time when you start>>>>>>>>>.I did, so IT WORKED !!!

[@dronemarketingpropaganda148]

Simple, restart the Spark

[@marvinmartian8396]

It's not that simple

[@tuduong1866]

Same my spark fault

[@mustlovedogs272]

The damn thing is made in China. Do you really expect it to last long?

[@daej312]

Awful.....

[@ChuckCasella]

haha....can't believe that worked.