I had to replace the gimbal after a drone crash. it was rotating chaotic and went in gimbal overload. this video was a life saver (and money) especially because we don't have a DJI service in Romania). thank you!!!!
Tot roman. Am un dji spark si mi-a venit cu gimbalul rotit spre dreapta. Nu am ce sa ii fac. Din setari nu merge sa il duc mai mult de 10°. Daca ai incercat metoda imi spui te rog daca merge. Chiar ma calca pe nervi chestia asta.
Brother you have no idea how many people are going to be thanking you for this video!! You saved so many people so much hastle! Jazak Allah! (Thank you in arabic)
Thank you for the detailed guide! I've to mention that the calibration failed for me for the first time, when I tried to perform it with low battery of the drone, and on a windows 7 pc. I got "result: UNSURE". Today I did it on a windows 10 computer with 100% battery on the DJI and it worked like a charm!
Thank you for the video. You should add in the description to make sure to install the DJI Assistant program, because I kept getting an error: "No response to calibration command..." before I installed that program.
My solution to error message 'access denied' was to not write 'py' or 'python' in front of the 'comm...'-command. Just typing 'comm...' without any prefix let the calibration run smoothly. Thanks for your video!
Thank you verry much. My DJI Spark also suffered a crush and the gimbal had stay crooked even with the new gimbal from the ebay. In our country also has no DJI service.
Eko Purwadi Please can you help me i have changed the gimbal and now it’s going crazy up and down I try to do as the video but when i enter the first gimbal calibration code it do as the video but the result is ((unsure)) and it won’t response to the second one. * the gimbal issue comes before I changed it i was thinking the problem is form it so I bought a brand new one but the problem is still the same and the drone had no crashes
@@ekopurwadi7106 I just tested this with Mavic Air, it worked, the gimbal is fixed now. Only problem is that the Overall Status shows "Camera Error No.3". Even after the error, the gimbal and the craft works properly.
Hi SUAS Media, thanks for the method it works for my Mavic 2 Pro for the JointCoarse. However nothing is happening for the LinearHall adjustment and my camera is not moving horizontally anymore. Any ideas?
Hi Eko, very nice job :) Respect :) I am trying to do it on my P4 - WM330 but i get an error that says : Prepared binary packet: 55 0e 04 66 0a 04 8a 02 20 04 08 00 f7 00 Sending packet... Waiting for reply... Timeout while waiting for reply. Retrieved 0 packets (0b), dropped 0 fragments (0b) No response received. Calibration process started; do not touch the drone for 15 seconds. Monitoring the progress is only possibe from a mobile app, so exiting.Prepared binary packet: Any idea what I am doing wrong ? I am using this line : comm_og_service_tool.py COM3 -vv WM330 GimbalCalib JointCoarse Thank you in advance :) /Peter
hi, did the calibration on the MAVIC 2 Pro, entered the text for the MAVIC 2 Pro on the command line, pressed ENTER and I get the message: “Info: The Gimbal will move through its boundary positions, then it will fine-tune its central position. It will take around 15 seconds. Error: Unrecognized response to calibration command JointCoarse request.” but the camera was aligned on the drone itself, but not there were messages like in your video "Prosress: received ..." and "finished" what problem can you know?
I receive the same error "Error: Unrecognized response to calibration command" My gimbal is calibrated but I still receive an error in the app :\ If someone knows how to fix it, please let me know!
Hello. I own dji mini2 and my bottom gimbal motor is highly overheating, Do you think it can be fixed by this kind of calibration ? Which tool to calibrate the dji mini 2 ? thanks
Hello! Thank you for your kindness. I tried it as you introduced. But there was no reaction from my pc when I input like this -python --setup.py-- install- . The prompt was just fall down to next line. Is there any solution? I am a user of winows 10/64bit.
Solution to this issue was posted below by Ania Zielona - works 01.2020 win 10 only instead of "python" on the command line and during installation I had to type "py"
Can this work with the mavic 2 series as well? I've heard that you need to do a software gimbal calibration after swapping the cameras. I have a Mavic 2 zoom that camera is tilted about 45 degrees after swapping the camera units. I've seen it happen on sparks and Mavic airs too after a camera replacement. Your script fixes the spark and Mavic air tilt issues. Do you know how to do it for the Mavic 2 drones?
@@jonathas9472 qual o sintoma sem fazer o procedimento? eu cheguei a trocar o gimbal mas ele ficava chacoalhando que nem louco.. vc acha que esse procedimento aqui que resolve a parada? Obrigado
"Python was not found; run without arguments to install from the Microsoft Store, or disable this shortcut from Settings > Manage App Execution Aliases." this is what i get but i have python installed. confused. unless microsoft store is an issue?
Hallo Ich bin Helmut aus Deutschland. Ich habe alles genau so gemacht wie du es beschrieben hast. Leider funktioniert das installieren:python setup.py installieren leider nicht Was mache ich verkehrt Würde mich über eine Antwort freuen Mit freundlichen Grüßen
@Eko Purwadi I made a video following on from your excellent video showing the process for the mavic 2 pro and I linked it to your video in the description
Author Hello Recently there was a crash The suspension broke in half; the train broke, ordered another set The picture goes gimbal Hangs at idle Motors do not heat up I noticed that there is no reaction to the motors The application does not receive a message about the Problem code 3. Started to calibrate with a special program Calibration does not happen What could it be Thank you in advance have a nice day
Hi, Running script but is complaining about serial number? File "C:\DJI\dji-firmware-tools-master\comm_og_service_tool.py", line 35, in import serial ModuleNotFoundError: No module named 'serial' Any suggestions?
Hi. What is done differently the second time for the command prompt to accept the python command to install setup.py? Any help would be much appreciated. Thankyou
@@ekopurwadi7106 For me, I see the COM port appear but then the drone disconnects and then reconnects and now the COM connection is missing. Performing the same task shows the same issue. :(
Hola no se si me pueda ayudar. cuando llego a esta parte (python comm_og_service_tool.py comX SPARK GimbalCalib JointCoarse) me da error en la parte de comX lleva otra cosa pero no se que.
What if my spark after crush ut suffers from gimbal gyroscope error hardware malfunction? How to solve this issue is it the flex tape or the gymbal?? I hope this gets attention so that my dji well work again..
@@cafeeaventuras I don't know its work or not, but you can follow my tutorial, and change last 2 command python comm_og_service_tool.py comX P4 GimbalCalib JointCoarse python comm_og_service_tool.py comX P4 GimbalCalib LinearHall
@@muhammadruslan5369 Hello, I am not sure if this works with the Mavic Mini. But I know that you need to turn off the Mini, then turn it on again and connect the USB cable within 20s after turning it on. Then, the Mini connects via a COM port (check device manager to find the proper port, mine was COM5). The command then must be run with the device identifier MMINI or WM160.
Hello, I have applied the two procedures with JointCoarse and LinearHall to my Mavic Mini with a replaced gimbal/camera system from another Mavic Mini. After the procedure, there is still an IMU gimbal error message, but the drone, camera and gimbal work normally. It can fly and record normally.
@@olafwinkler180 For me, windows detects the drone as WM160 :) but the bad news is I can't get the COM connection to stay connected. The drone disconnects after about 5 seconds and then reconnects again. After the reconnection - the COM connection disappears from device manager and is not accessible.
Gan kenapa saya coba python setup.py install seperti di menit 4:03 ga bs jalan proses nya... sudah diulang berkali-kali tetap ga jalan.. apanya yang salah ya...?
Hi Eko, very nice job :) I am trying to do it on my mavic mini - WM160 but i get an error that says : info: The Gimbal will move through its boundary positions, then it will fine-tune its central position. It will take around 15 seconds. Prepared binary packet: 55 0e 04 66 0a 04 5b 90 20 04 08 01 0b 78 Sending packet... Waiting for reply... Retrieved 1 packets (14b), dropped 0 fragments (0b) Received response packet: 55 0e 04 66 04 0a 5b 90 80 04 08 01 1a 6c Error: Unrecognized response to calibration command JointCoarse request. C:\Users\xx\Downloads\dji repair\DJI\dji-firmware-tools-master>py comm_og_service_tool.py -vv COM4 WM160 GimbalCalib LinearHall Opened COM4 at 9600 Info: The Gimbal will slowly move through all positions in all axes, several times. It will take around 30 seconds. Prepared binary packet: 55 0e 04 66 0a 04 c0 9a 20 04 08 02 0f 6c Sending packet... Waiting for reply... Retrieved 1 packets (14b), dropped 0 fragments (0b) Received response packet: 55 0e 04 66 04 0a c0 9a 80 04 08 01 85 4a Error: Unrecognized response to calibration command LinearHall request. Where is the problem ?
I had to replace the gimbal after a drone crash. it was rotating chaotic and went in gimbal overload. this video was a life saver (and money) especially because we don't have a DJI service in Romania). thank you!!!!
Tot roman. Am un dji spark si mi-a venit cu gimbalul rotit spre dreapta. Nu am ce sa ii fac. Din setari nu merge sa il duc mai mult de 10°. Daca ai incercat metoda imi spui te rog daca merge. Chiar ma calca pe nervi chestia asta.
Brother you have no idea how many people are going to be thanking you for this video!! You saved so many people so much hastle!
Jazak Allah! (Thank you in arabic)
Wajazakallohu khoir
Thank you for the detailed guide! I've to mention that the calibration
failed for me for the first time, when I tried to perform it with low
battery of the drone, and on a windows 7 pc. I got "result: UNSURE".
Today I did it on a windows 10 computer with 100% battery on the DJI and
it worked like a charm!
Alhamdulillah sudah bisa tanpa kendala, Terima kasih banyak pak @Eko Purwadi sangat membantu info kalibarsi gimbal SPARK ini.
Siip, sama sama Pak
Thank you for the video. You should add in the description to make sure to install the DJI Assistant program, because I kept getting an error: "No response to calibration command..." before I installed that program.
mantap berhasil , FYI kalo command ga berhasil saran input python dengan py , its works
Siipp
My solution to error message 'access denied' was to not write 'py' or 'python' in front of the 'comm...'-command. Just typing 'comm...' without any prefix let the calibration run smoothly.
Thanks for your video!
it doesnt do anything by me if i click enter. can someone help me?
@@nicknijland7568 post a screenshot link
You're the best. I respect you. I really want to say thank you.Thank you very much. I wish you all the best.
Worked perfectly on a newly fitted spark gimbal.
Cheers guy.
Thank you verry much. My DJI Spark also suffered a crush and the gimbal had stay crooked even with the new gimbal from the ebay. In our country also has no DJI service.
Thank you so much for this tutorial!!! I fix my gimbal on the Spark! After crash gimbal was in very bad condition! ;)
I fix my gimbal on the Spark. Thank you so much :)
Does it fix gimbal overload too?
привет из России !!! Спасибо большое за помощь ! Вы молодцы !
Thanks
fantastic, it works, thank you and recommend this script to other people :) thank you again :)
Worked flawlessly. You are awesome! Thank you!!!
Just a little work and All's GOOD!!! A+ You sure know your Stuff! **** DJI!
Thanks Guy !!!
All the positive energies for you 😌🙏😃
Tq so much.. you saved my drone...
FANTASTIC!!!!( i had to replace (python) with py to get the commands to work (win10)..apart from that it works!!
Thanks for the info
Brilliant finally works now thanks was doin me nut in!
Eko Purwadi
Please can you help me i have changed the gimbal and now it’s going crazy up and down I try to do as the video but when i enter the first gimbal calibration code it do as the video but the result is ((unsure)) and it won’t response to the second one.
* the gimbal issue comes before I changed it i was thinking the problem is form it so I bought a brand new one but the problem is still the same and the drone had no crashes
@@76zoomzoom I had two "unsure" results but keep trying and eventually it works!
@Old Git with new tech @Eko Purwadi
I tried so many times the same issue the gimbal stops when it reaches to 93 reporters and the result unsure 🤯🤯
DO you have the comand line for mavic pro? I'm use windows 11
Hi Author, I must say very nice video.
I wanted to ask is this the same process to calibrate Mavic Air Gimbal after replacement?
No, just for spark
@@ekopurwadi7106 I just tested this with Mavic Air, it worked, the gimbal is fixed now. Only problem is that the Overall Status shows "Camera Error No.3". Even after the error, the gimbal and the craft works properly.
@@pratikalwaysrocks Thank's for your info
Hi SUAS Media, thanks for the method it works for my Mavic 2 Pro for the JointCoarse. However nothing is happening for the LinearHall adjustment and my camera is not moving horizontally anymore. Any ideas?
Thank you so much, effectiv and save time
Thanks for the amazing guide. It worked like a charm.
Kindly guide me for phantom 4 pro gambal and hall calibration too
What would you use for the Mavic Mini?
Hi Eko, very nice job :) Respect :) I am trying to do it on my P4 - WM330 but i get an error that says :
Prepared binary packet:
55 0e 04 66 0a 04 8a 02 20 04 08 00 f7 00
Sending packet...
Waiting for reply...
Timeout while waiting for reply.
Retrieved 0 packets (0b), dropped 0 fragments (0b)
No response received.
Calibration process started; do not touch the drone for 15 seconds.
Monitoring the progress is only possibe from a mobile app, so exiting.Prepared binary packet:
Any idea what I am doing wrong ?
I am using this line : comm_og_service_tool.py COM3 -vv WM330 GimbalCalib JointCoarse
Thank you in advance :)
/Peter
good day. Tell me, please, is it possible to calibrate the mavic pro suspension or another quadrocopter?
profersor emang josssss yaaaa hihihi
Hahahaaa, duwur men sekolaeh
Откалибровали Mavic 2 Pro, после замены мотора! Спасибо!
Shto pisali v mesta SPARK. V kommandnoi strake
у вас не было ошибки "Unrecognized response to calibration command JointCoarse request." ?????
best man! i have a question, can this method only be used in spark? i have a phantom 4 pro,how to gimbal calibratiom! thank you!!!
this method only for spark, P4P gimbal can calibrate with dji go 4
man you are the best!!!!
Thanks
hi, did the calibration on the MAVIC 2 Pro, entered the text for the MAVIC 2 Pro on the command line, pressed ENTER and I get the message:
“Info: The Gimbal will move through its boundary positions, then it will fine-tune its central position. It will take around 15 seconds.
Error: Unrecognized response to calibration command JointCoarse request.”
but the camera was aligned on the drone itself,
but not there were messages like in your video "Prosress: received ..." and "finished"
what problem can you know?
Hello.
Is the problem solved?
I receive the same error "Error: Unrecognized response to calibration command"
My gimbal is calibrated but I still receive an error in the app :\
If someone knows how to fix it, please let me know!
Thanks om ku cover gimbalnya terbaik👍😁🙏
drone apa om?
Hello. I own dji mini2 and my bottom gimbal motor is highly overheating, Do you think it can be fixed by this kind of calibration ?
Which tool to calibrate the dji mini 2 ?
thanks
Can't thank you enough .
Friend you're fantastic, this video saved me. thank you very much!!!
Thanks'
Hello! Thank you for your kindness.
I tried it as you introduced. But there was no reaction from my pc when I input like this -python --setup.py-- install- . The prompt was just fall down to next line. Is there any solution? I am a user of winows 10/64bit.
Solution to this issue was posted below by Ania Zielona - works 01.2020 win 10 only instead of "python" on the command line and during installation I had to type "py"
@@Cr4ft3r99 I did it with several trials! Thank you for your useful video! :)
Can this work with the mavic 2 series as well? I've heard that you need to do a software gimbal calibration after swapping the cameras. I have a Mavic 2 zoom that camera is tilted about 45 degrees after swapping the camera units. I've seen it happen on sparks and Mavic airs too after a camera replacement. Your script fixes the spark and Mavic air tilt issues. Do you know how to do it for the Mavic 2 drones?
Sorry, I don't have an idea.
@@ekopurwadi7106 Thank you for the reply. Would have been great if I could just change the script to SPARK to MAVIC2 and it would work...
Terima kasih om tutorialnya sangat bermanfaat dan berhasil..
Sama sama Om
Excelente tutorial,eu estava procurando e funcionou perfeitamente no meu DJI Spark
Utilizei no Windows 10 e funcionou sem problemas
@@jonathas9472 qual o sintoma sem fazer o procedimento? eu cheguei a trocar o gimbal mas ele ficava chacoalhando que nem louco.. vc acha que esse procedimento aqui que resolve a parada? Obrigado
@@GuilhermeGomes2 seu problema parece mais com cabo flat.. mas eu queria saber mesmo era se esse procedimento funciona em um mavic pro 1...
Thank you very much, this helped me a lot!!!
Hi, is possible also on DJI Phantom 4 Standard?
I am looking for the same answer 😊👍 let me know if you find the solution or if we should help each other here😊👍
@@a10vg71 ok
excuse me.. how do you// what do you click to "Install pyserial using pyton script
" ???
"Python was not found; run without arguments to install from the Microsoft Store, or disable this shortcut from Settings > Manage App Execution Aliases." this is what i get but i have python installed. confused. unless microsoft store is an issue?
Hey! Can I do the same with my Mavic Air 2
Hallo
Ich bin Helmut aus Deutschland.
Ich habe alles genau so gemacht wie du es beschrieben hast.
Leider funktioniert das installieren:python setup.py installieren leider nicht
Was mache ich verkehrt
Würde mich über eine Antwort freuen
Mit freundlichen Grüßen
thank for this !!cani ask how about my mini2 gimbal calib
If I add a new mainboard into my Air 2, would I have to follow up with this as well?
Cheers
If you get a mainboard that is matched to the gimbal then you wont have to do any of this.
@Eko Purwadi I made a video following on from your excellent video showing the process for the mavic 2 pro and I linked it to your video in the description
Thanks
mavic air 1 ?compatible?
thanke youuu man!!!!!!
Mavic mini... and cmd send:
Error: No response on calibration command JointCoarse request.
Help!
this is work for phantom 4 ? the problem is off center gimbal
hi i have a dji mavic air that the gimbal needs calibrating is there a way for this to work with it or is there one for the mavic air?
Just calibrate from dji go4
Thanks so much really I used for my mavic air and it worked
With what you change the SPARK for mavic air, MAVIC AIR or MAVICAIR?
@@projectofjava5002 same question
Same question?
Hello again. You have idea for mavic air . I ve unrecognized in python . Calibrate start but , I ve always code error 3 on dji . Thx for your help
Hi, did you replace camera also?
Eko Purwadi ive replace complete gimbal
@@droneintervention1010 replace with current camera.
thank you!! but "result: unsure" what does it mean?
Author Hello Recently there was a crash The suspension broke in half; the train broke, ordered another set The picture goes gimbal Hangs at idle Motors do not heat up I noticed that there is no reaction to the motors The application does not receive a message about the Problem code 3. Started to calibrate with a special program Calibration does not happen What could it be Thank you in advance have a nice day
Hello, do you know if this could work with the Mavic Air? Thank you
Not test on MA, sorry
Try wm230 instead spark
>>> can i use this process on mavic pro 1?
Hi, Running script but is complaining about serial number? File "C:\DJI\dji-firmware-tools-master\comm_og_service_tool.py", line 35, in
import serial
ModuleNotFoundError: No module named 'serial' Any suggestions?
Hadir mas🙏🙏👍🙌
Monggoo
Will that fix issue with gumball that will not go all the way up or down only when forced manually.
Cheers
No, you need to replace flexible cable
Hi. What is done differently the second time for the command prompt to accept the python command to install setup.py?
Any help would be much appreciated. Thankyou
First time i open command promp, python instalation not yet finish. Too earlier, so i need to close and reopen.
działa 01.2020 win 10 tylko zamiast "python" w wierszu poleceń i przy instalacji musiałam wpisać "py"
In english: works 01.2020 win 10 only instead of "python" in the command line and during installation I had to enter "py"
Hi, i cannot see the PORT (COM LPT) Option in the DEvice Manager (Windows 8) Can you help me?
Hi, power on spark and make sure any sound detect on pc/laptop when plug the usb cable. If not, try replace with others usb cable.
@@ekopurwadi7106 For me, I see the COM port appear but then the drone disconnects and then reconnects and now the COM connection is missing. Performing the same task shows the same issue. :(
I had to open the assistant app first, let the COM connection establish, then I closed the assistant app. The COM port remained.
Hola no se si me pueda ayudar. cuando llego a esta parte (python comm_og_service_tool.py comX SPARK GimbalCalib JointCoarse) me da error en la parte de comX lleva otra cosa pero no se que.
open device manager, check ports and replace comX to DJI ports are detected.
What if my spark after crush ut suffers from gimbal gyroscope error hardware malfunction? How to solve this issue is it the flex tape or the gymbal?? I hope this gets attention so that my dji well work again..
I try to extract the pyserial and nothing shows up even tho winzip says it was unzipped. please help!
how to calibrate dji mavic air???
toslok na sa iyong LIVE FOR A CAUSE...LETS HELP .MALIIT MAN PAG NAPAGSAMA SAMA MALAKING TULONG NA YAN
Hello, can you please help with gimbal calibration for MAVIC AIR 2 ? I changed the gimbal camera but I need calibrate gimbal with board.
Dji air 2 no
@@air.dronefpv does this work with the Mavic Air 2?
@@MrShizzle979 Yes it works but there will be an error
mavic mini work thank you 🙂🙂
what is the name on the code of the mavic mini to replace by spark?
@@flashfast2007 wm160
How do I calibrate the phantom 4 pro gimbal? It has been changed and it gets crooked.
P4P can calibrate via dji go 4 app
@@ekopurwadi7106
I changed a board from one of the guimbal's engines and now it does not stay in the center
Do you already calibrate with dji go app?
@@ekopurwadi7106 yes. I've read some things you need software that DJI does not have for calibration
@@cafeeaventuras I don't know its work or not, but you can follow my tutorial, and change last 2 command
python comm_og_service_tool.py comX P4 GimbalCalib JointCoarse
python comm_og_service_tool.py comX P4 GimbalCalib LinearHall
will this work for mavic air?
Only for spark
@@ekopurwadi7106 mavic air is wm230 just simply instead of spark
Thank you very much! Please tell me if this code is applicable for MAVIC PRO?
Hi, Mavic Pro no need this, already have a menu on DJI go 4.
@@ekopurwadi7106 I changed the suspension (Gimbal) and can I calibrate it without using the code that you provided?
@@TheBigbadaboom yes, use menu "Gimbal Auto Calibration" on DJI go 4 settings.
@@ekopurwadi7106 Ещё раз спасибо вам большое. Попробую.
@@TheBigbadaboom Shto vi pisali v mesa SPARK ? Shtob atkalibrirovat mavic pro?
I need help guys, when I plug in my mavic the gimbal goes limp and the command finds no response from the gimbal??
Does the spark have to be in P mode for this to work?
No
How I can fix IMU -50 calibration issue? My drone is physically perfect but I can’t calibrate it.
Refresh firmware than imu calibration.
If not solve you need to replace imu sensor.
Untuk mini 2 bisa ga ya
hello, is same code for mavic air ? thx you or replace only spark by mavic air
Replace SPARK with MAVAIR
Eko Purwadi thx I wait the gimbal for try , because with broke gimbal the program not start calibrate
thank you
Assalamualaikum
Apa ini bisa di pake buat kalibrasi Mavic Mini setelah ganti gimbal... Dan kode mavic mini BrapA yah om?
Wa'alaikumsalaam warohmatulloh wabarokaatuh
Belum pernah coba di mavic mini Pak, belum ada unit buat nyobain.
Saya udah dapat seri mavic mini WM160.. cuman mavic mini nggak mau konek ke PC nyamm com nggak kebaca
@@muhammadruslan5369 Hello, I am not sure if this works with the Mavic Mini. But I know that you need to turn off the Mini, then turn it on again and connect the USB cable within 20s after turning it on. Then, the Mini connects via a COM port (check device manager to find the proper port, mine was COM5). The command then must be run with the device identifier MMINI or WM160.
Hello, I have applied the two procedures with JointCoarse and LinearHall to my Mavic Mini with a replaced gimbal/camera system from another Mavic Mini. After the procedure, there is still an IMU gimbal error message, but the drone, camera and gimbal work normally. It can fly and record normally.
@@olafwinkler180 For me, windows detects the drone as WM160 :)
but the bad news is I can't get the COM connection to stay connected. The drone disconnects after about 5 seconds and then reconnects again. After the reconnection - the COM connection disappears from device manager and is not accessible.
Bro in last step in your computer it showing com4 and in my computer it showing com3 when I gave command with com3 it doesn’t work plzz help 😩😩😩
What is the commands of phamton4 pro
For Phantom 4 Pro ?
Gan kenapa saya coba python setup.py install seperti di menit 4:03 ga bs jalan proses nya... sudah diulang berkali-kali tetap ga jalan.. apanya yang salah ya...?
ga bs running install
@@ToplayCom ganti python dengan py gan, jadinya "py setup.py install", tanpa tanda kutip ya
OK gan saya coba ya... thanks
thanks om eko, from hendra
Siipp
still need to calibrate to DJI apps after using this?
No
Buat mavic pro 1 gmn mas?
jika untuk phantom apakah bisa
o comando python setup.py install não funcionou no windows 10. Qual seria o comando para o windows 10?
Make sure python already finish install before open command prompt.
If still happen try replace "python" with "py"
Ini buat phantom 3 series bisa ga? Setelah ganti board gimbal yaw motor jd bengkok soalnya
Belum pernah nyoba om, belum punya unitnya.
dji mavic mini 2 gimbal calibration help me
Will this working with mavic zoom too?
yes my friend
@@dronesimagensgyn Just fix my pro 2 thanks. Have video in my channel
Hi Eko, very nice job :) I am trying to do it on my mavic mini - WM160 but i get an error that says :
info: The Gimbal will move through its boundary positions, then it will fine-tune its central position. It will take around 15 seconds.
Prepared binary packet:
55 0e 04 66 0a 04 5b 90 20 04 08 01 0b 78
Sending packet...
Waiting for reply...
Retrieved 1 packets (14b), dropped 0 fragments (0b)
Received response packet:
55 0e 04 66 04 0a 5b 90 80 04 08 01 1a 6c
Error: Unrecognized response to calibration command JointCoarse request.
C:\Users\xx\Downloads\dji repair\DJI\dji-firmware-tools-master>py comm_og_service_tool.py -vv COM4 WM160 GimbalCalib LinearHall
Opened COM4 at 9600
Info: The Gimbal will slowly move through all positions in all axes, several times. It will take around 30 seconds.
Prepared binary packet:
55 0e 04 66 0a 04 c0 9a 20 04 08 02 0f 6c
Sending packet...
Waiting for reply...
Retrieved 1 packets (14b), dropped 0 fragments (0b)
Received response packet:
55 0e 04 66 04 0a c0 9a 80 04 08 01 85 4a
Error: Unrecognized response to calibration command LinearHall request.
Where is the problem ?
Hello! did you fix this issue?
boot the drone and see if it worked
Does this tool also work with the Mavic air?
Or could anybody share the tool for the Mavic air?
many thx in Advance!
Its work
@@ekopurwadi7106 what need change in SPARK for AIR?
@@samssLV spark change to WM230, report will show error but calibration still continue.
what if the gimbal does not moves during python script execution?
What is your problem before calibration ? Did your gimbal still works ?
Mas.. Klo tutorial buat kalibrasi gimbal mavic air gmn??
Perintah SPARK diganti MAVAIR mas
untuk kalibrasi gimbal phantom 4 yang setelah mengganti yaw motor gimbal, itu bagaimana mas?
Aku juga belum nemu mas, masih trial n error, tapi banyakan errornya.