With stock setup, we got it to 1.3 degrees camber up front so pretty close to OEM but it's not in the green but acceptable for a lowered car. If you want to be green then you need camber arms
I got the Endura Pro Plus, yes it makes some clunking noises in the rear. I think it happens when the two sides are shocked in close offset to each other and the sway bar amplifies their mutual motion. the OEM shocks were so heavily damped that the wheels acted more slowly and you didn't get the clunking. If you want low damping there doesn't seem to be much solution. Looking at @euroboutique's kind reply to you, this happens on the coilover as well, despite the spring swap.
Great question, each set is designed for different purposes, stick with the Endura if you don't plan to lower the car. The Flex-Z gives infinite height adjustability among other things. Tein website explains it best!
@@euroboutique Thanks for the answer. I don't want to lower it, the height is fine as it is. It is difficult to find Endura dampers but Tein is available. Do I have to lower the car with Tein, or can I still have the same height as now with them? The hard ride really bothers me a lot since I'm used to drive a german SUV...
Best bang for the buck coilovers. And the increase in comfort is AMAZING!
I was just looking at Tein Lowering Setup for my Model Y. This is exactly what I had in mind except for different rims. I love it.
Could you info about the newly installed rims?
how do they compare to Tein Endura pro plus or öhlins road&track ?
I just lowered my Y and the lowest in the back is a 1.6 drop 😫
Were you able to get the front camber adjusted when lowering this much?
With stock setup, we got it to 1.3 degrees camber up front so pretty close to OEM but it's not in the green but acceptable for a lowered car. If you want to be green then you need camber arms
Any clunking noises with these? Considering this but heard it makes a lot of noise.
Makes a little bit of noise occasionally but nothing drastic or annoying
I got the Endura Pro Plus, yes it makes some clunking noises in the rear. I think it happens when the two sides are shocked in close offset to each other and the sway bar amplifies their mutual motion. the OEM shocks were so heavily damped that the wheels acted more slowly and you didn't get the clunking. If you want low damping there doesn't seem to be much solution. Looking at @euroboutique's kind reply to you, this happens on the coilover as well, despite the spring swap.
Nice review! Question, where did you get your front lip and rear valence?
euroboutique.us/collections/tesla-carbon-parts
How is the ride I heard some noise will come while driving . I wanna update to my car Tesla model y performance. Thank you
Tein has a fix for the slight noise, we stock the parts for the upgrade so eliminate the clunking from spring twisting
Thanks for information. How much I can lower front and rear from stock height on mode y performance?
What’s the maximum drop front and rear with these coilovers?
Do you have any black Friday deals in this suspension I wanna buy it . Thank you .
Yes 🎉please email us for code
Do they have softer suspension? I don't need low the car but smooth. Thanks
It's adjustable 16 ways so yes it can be softer or firm by dialing in what you prefer
what is the main difference between Tein Flex Z coilovers and Tein EnduraPro Plus dampers? Both gives the desired increase of confort..correct?
Great question, each set is designed for different purposes, stick with the Endura if you don't plan to lower the car. The Flex-Z gives infinite height adjustability among other things. Tein website explains it best!
@@euroboutique Thanks for the answer. I don't want to lower it, the height is fine as it is. It is difficult to find Endura dampers but Tein is available. Do I have to lower the car with Tein, or can I still have the same height as now with them? The hard ride really bothers me a lot since I'm used to drive a german SUV...
How much for installation?
The labor varies based on where you are located region wise
Do you have any discount codes?
Yes we do, shoot us an email: euroboutique.us@gmail.com and let us know what you are looking for!
I sent an email but no response.@@euroboutique
Can someone respond? I sent an email to you guys but no response yet.
We did not receive any email, please resend or DM us on Instagram@@J-J-TL