Wow, absolutely perfect instructions. Ford wanted $700 to replace it ($450 for camera and $250 labor. With your camera suggestion and on point instructions, I did it for $167 and 45 minutes. Big thanks
Thanks for the video. I followed your directions and it now works great. Got my camera on Amazon for about $55. Took me less than an hour and I have never done anything like that before
Great video. This helped me do the repair. It only cost me $25.00 for the part on Ebay and 45 minutes of my Saturday. It couldn't have been much easier. I did have to unplug the auto close button for an option your car didn't have, but otherwise video was spot on. Thanks for the help.
Great video thank you! My backup cam is failing and I was hoping the job was something I could do in my driveway. This gives me confidence to tackle it. 👍
Thank you very much for this video, it will be very useful to me since I have to change my camera and the good thing is that it is the same model in your video... I have a question now I have to change the gear lever, do you have any model What can I buy?.....any suggestions?
Hi, it really depends. I found one on ebay for 2013-14 escape 2.5 with select shift, but please make sure its right for yours www.ebay.com/itm/286009736301
What issue does this fix. My camera glitches out, inverts, stays on reverse cam after I shift to drive then I get message to have technician look at it. Feel like it started doing this after I did radio SW update. 2014 Escape Titanium.
Can't remove those two screws on my 2017 mkc (on the handle) , try the torx 20 screw driver can't fit in, it's hard to see the screws also, any suggestion?
Ours does the same thing. Ford told us it just needed a new camera. They wanted $950 to do it, hence why I am watching this video now lol. I’ll let you know if it actually fixes it.
So far, so good on the new camera I installed! I bought the Dorman brand off Amazon. It was around $100-$150 Fixed the intermittent issues we were having.
![🎤 ไปกันต่อออ! จับฉลากร้องเพลง x P’ #XXSIVK [EP.2] (1/2) เพลงของใครจึ้งสุดน้าา 💓🎤 #MXFRUIT](http://i.ytimg.com/vi/mLI_K0sAS4o/mqdefault.jpg)
Wow, absolutely perfect instructions. Ford wanted $700 to replace it ($450 for camera and $250 labor. With your camera suggestion and on point instructions, I did it for $167 and 45 minutes. Big thanks
You're very welcome!
Super easy to do! Didn't even take 30 minutes! Great video!
Thanks for the video. I followed your directions and it now works great. Got my camera on Amazon for about $55. Took me less than an hour and I have never done anything like that before
Awesome!
Great video. This helped me do the repair. It only cost me $25.00 for the part on Ebay and 45 minutes of my Saturday. It couldn't have been much easier. I did have to unplug the auto close button for an option your car didn't have, but otherwise video was spot on. Thanks for the help.
Great video thank you! My backup cam is failing and I was hoping the job was something I could do in my driveway. This gives me confidence to tackle it. 👍
Awesome! Glad to help
Thank you for the tutorial. Father In-Law and I were able to replace this in 25 minutes.
You're welcome. Glad to help!
Fantastic instructional video. This actually gave me the confidence to tackle this project. Thanks.
@@GenePicciafoco you're welcome!
Good tip to take a picture
Awesome video! My error message for my 2017 Ford Escape says "camera unavailable" so I'm guessing this fix would work.
Glad it helped. Yes, most likely.
@@BigBensCarsAndCycles really well done video, I'm going to attempt this fix on the weekend 💪
Awesome video. Thanks for taking your time and explaining everything!
Setup a 'thanks" donation button on this video.
Hi, it should be set up, I'm glad the video helped!
Thank you very much for this video, it will be very useful to me since I have to change my camera and the good thing is that it is the same model in your video... I have a question now I have to change the gear lever, do you have any model What can I buy?.....any suggestions?
Hi, it really depends. I found one on ebay for 2013-14 escape 2.5 with select shift, but please make sure its right for yours www.ebay.com/itm/286009736301
Very helpful
Thank you
What issue does this fix. My camera glitches out, inverts, stays on reverse cam after I shift to drive then I get message to have technician look at it. Feel like it started doing this after I did radio SW update. 2014 Escape Titanium.
Typically those are symptoms of a bad camera
Can't remove those two screws on my 2017 mkc (on the handle) , try the torx 20 screw driver can't fit in, it's hard to see the screws also, any suggestion?
@@bigfish3238 I'd shine a flashlight on the screws and see if they're a different size
My camera works some of the time. I wonder if it's a loose connection on one of the plugs.
Ours does the same thing. Ford told us it just needed a new camera. They wanted $950 to do it, hence why I am watching this video now lol.
I’ll let you know if it actually fixes it.
Following this too!
So far, so good on the new camera I installed! I bought the Dorman brand off Amazon. It was around $100-$150
Fixed the intermittent issues we were having.
Thank you, on my 2016 Escape, the image displays upside down, is that more likely the camera or something more involved? Thanks!
Thats most likely the camera
@@BigBensCarsAndCycles Thanks, that would be the easiest fix!
Is this process the same on a 2014/2018 FORD EDGE???? CAN YOU USE THE MOTORCRAFT (I THINK) XG12 DI ELECTRIC GREASE???
I believe it is a very similar process. Once the lift gate trim panel is taken off any variations should be obvious
Thank you for a easy how to video
Glad to help!
Does the 2013 ford sel have the harness. I have one and want to put in a camera. Is there any steps to it or is the harness there
What's the camera part number, I can't read it.
Inquiry,, the installed camera is generic or original
OEM (original)
@@BigBensCarsAndCycles Sorry, where did you buy it, I need one.
In Amazon
@jessyt.348 here's an aftermarket one. Amazon doesnt hace oem. You can get that at the dealer amzn.to/4cLVnTI
@@BigBensCarsAndCycles thank you 👍
I can't do this.
I believe in you!