Cargo Trailer Conversion Electrical Power Center | Progressive Dynamics 4135 | How To Build Yours!
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Check out the components I used, and how I built my own power center for the cargo trailer conversion, similar to a van conversion. I couldn't be any happier with how its been operating and gives me everything I need. Using a Power Center like the PD4135 simplifies building out you conversion's electrical system. Solar power trickle chargers can be easily added on, as well as power inverters. Hopefully this helps you guys out some, and at least help you brainstorm ideas of how you want to set up your power system. Leave questions & comments below!
Consider Installing a pass-through 17:12
Sub: / @mtsubfly
Buy a coffee to support: www.buymeacoff...
Our Businesses Website (Doggo & Catto Goodies):
www.localpawsr...
Progressive Dynamics 4135 (Larger Power Units are available):
www.progressiv...
Also Check out Progressive Dynamic Power Inverters here:
www.progressiv...
Kohree 12VDC Charging Panel:
www.amazon.com...
Stereo Used:
www.walmart.co...
Battery Switch:
www.walmart.co...
Music is copyright free, provided though you-tube's creators audio library.
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 67 [ซับไทย]](http://i.ytimg.com/vi/he_uIQ-Xv_Q/mqdefault.jpg)
![[UNCUT] “ช่อ พรรณิการ์” ปะทะเดือด “มัลลิกา” ชี้หน้า สั่งหยุด! I คนดังนั่งเคลียร์ I 22 ส.ค. 67](http://i.ytimg.com/vi/cJ_z_bHnvIE/mqdefault.jpg)
This guy is such a good salesman.....he could sell ANYTHING!!!!
This is what I want to do in my cargo trailer
14:10 My grandfather was pretty handy with stuff. When describing EVERY project, he’d start off with “build yourself a framework. . .” Good memories. Made me laugh when you did almost exactly that.
I guess im asking the wrong place but does someone know a trick to get back into an Instagram account?
I was stupid forgot the login password. I would love any tricks you can give me!
@Rudy Kevin Instablaster =)
You did an amazing job on this build out. The electrical system is well thought out. Again, just a great job. Congrats !
Thanks a bunch!
MT, you do some great how to videos. I'm insulating my cargo trailer right now, and i'm about to start putting together the electrical system. Your video answered a few questions I had. Thank you so much!
Thank you! Good luck!
Greetings: Good presentation. Very well done. Electrical / Electronics is 1 of my trades. I have done trailers and boxes, some similar 2 Ur plan. I have plans drawn 4 a trailer a bit larger than Ur's ...when I find it. Thx 4 the share.
Great build. I'm getting ready to start a utility tlr build. Gonna be pretty basic but will need power, and a way to install a portable a/c and vent it. You're a wealth of info, thanks.
Very Informative! Made decisions on how to power up my cargo trailer. Great job!
Excellent build, and a wonderful business idea. Well done! Thanks kindly for sharing.
Awesome video. It answered all of my questions.
U know your getting a lot of looks, if youtube, are putting commercials in your videos
Great job !!!
But the commercials are only irritants.
When I am forced through watching enough of them I only remember the products as "really bad stuff, DONT BUY THIS CRAP!! EVER!!!!!" The exact opposite of what they are attempting to do! But that is on them!
No ad on TH-cam needs to run more than 10 sec, but they haven't figured that out yet, either, I would guess!
So not sure the ads are a measure of success for anyone considering all that they don't do!!! And the levels of irritation they garner.
Great information. I want to set up something like this in my 4Runner. Thank you for the detail.
Tell us about your business.
Also, looked like you used standard house wires for your 110V. If you upgrade your system, use stranded wire next time. The solid copper house wiring can work harden when bouncing around and eventually break.
Thank you! You are the 2nd person asking about the business. It's a mobile pet (dog/cat) supply biz. We're hoping to get into a building some day, but folks are loving the trailer besides limited space.
I didn't think about stranded wire, though as a former aviation mech, I get what your saying. Solid wire isn't used in aircraft due to the high frequency vibs make them crack. Thank fully so far we aren't moving around too much for now...Cheers!
you can see our website and a few pics of our trailer here: www.localpawsredmond.com/products/shop/
Also were on facebook and instagram with the biz. Local Paws Redmond
Great video, thank you
Thank you. Well done!
Thank you.
Nice job I hope you do well with your business
great video and explanation !!
Great job and nice video. It seems like this is the way to go with any overland or cargo trailer build, installing the 4135 PD. It is cheaper and less work to hook everything up! This is like a multi unit. Can you hook up an Inverter to your set up? I would think so.
I would love to see your store if you can make a video of your store . I’m starting a enclosed cargo Bussiness and would like some ideas 💡
Greetings: A fuse will not protect / prevent polarity reversals. It MAY protect after the incident.
Would you consider sharing details on the electrical components so that I could order what I need to have this exact set up?
How did you make your walls? Is that a premise board or is that some kind of plywood you painted? I like the look.
Hey mark, your insulation video really saved me. Luckily I was at a place where I could start over, return most of what I bought and do exactly what you did. So thanks! My only probable right now is condensation. I’m in Seattle with a lot of rain and semi cold weather. And right now I use a mr heater big buddy propane for heat. With a good vent and gas and Corbin monoxide alarms... but the condensation is unreal. So with the insulation you showed me, is all that water and condensation still going to be there just behind my walls? Will the insulation make it stop? And also that pink foam, it doesn’t have a vapor barrier right? So I would need to add that? Did you? Sorry for all of the questions, I can’t find a single person that has really been able to help me without costing me a ton of course. So I wanted to pick your brain amongst others on trailer conversion if I can find one that seems to know what their doing like yourself ... I was hoping you had an email or something to reach out, so please comment back if you can thanks!
Thanks for the comment!
XPS (pink stuff) is superior to EPS and Polysio when is comes to moisture. It can and is used underneath concrete in some places as I understand it. It resists moisture.
I'm not sure were you are getting condensation, but using propane will increase moisture levels surprisingly. Burning a gas releases moisture into the air. (That's why gas furnaces have a drain, and why gasoline cars drip water from the exhaust {partly}) So propane heaters may raise the temp, but may also be adding to the relative humidity inside, and if your walls (including insulation) are cold enough (at or below the dewpoint, which in Seattle often times dewpoint is very close to the relative temp=condensation) then moisture will condense onto the walls surface (like an ice cold soda-pop can).
I didn't add a vapor barrier, nor did I make it perfectly air tight. I also live in a dry area. I don't think you need to add a vapor barrier. The XPS is resistant to moisture. I think it is a closed cell construction.
I appreciate the questions. I don't know everything, and I'm learning daily. So maybe someone else knows better than me? For me what I have shown has been working great for the last 6 months, and the trailer has been used almost daily, along with a propane buddy heater. But then again, I live in a dry environment.
You need to check out a you tuber named "Slow Lane" he lives in Oregon and is having your same problem
His video is titled "Cargo trailer insulation tips"
Very informative! Where did you find the awning with speakers?
Came with trailer, brand is Solera
could you identify the unit that has the 2 usb ports | the 12dc car plug / battery charge level
I did not see it in the vid. "this little guy" hehe
Yea its a charging unit by Kohree, I actually really love it and use it daily. There is a link in the video description with all of the items I used including the charging unit.
Great Video! I am wiring my pop up with the PD4135 and will use this as a partial model (thanks!). Could you tell me the basic scheme of battery, converter, and charging panel so that my charging panel would give me all the information that you just described?
Awesome Bro!!! I'm not 100% sure what you mean. The 4135 connects to the battery, the mini charging station I have, and 110v coming in. The unit makes this a breeze. Can you clarify or be more specific? Wiring is not an easy thing to write about, but I wanna help if I can!
@@MTsubfly thanks for getting back with me. I guess what I'm asking is where exactly do you hook the USB / aux charging panel? Inbetween battery and converter, from the fuse box, or somewhere else?
@@joshsmyrl1204 Gotcha. The aux charging panel would get its own circuit, its own fuse. the PD4135 has several 12vDC fuses/circuits available. So the battery would go straight into the PD4135, and the 12vDC Power would be distributed through each of the fuses/circuits available. So connect your aux charging panel to one of the 12vDC Fuses. I hope this makes sense. This way, if for any reason too much power was drawn though your aux charging unit, it would blow a fuse, and protect the wiring/unit from damage.
@@MTsubfly that makes perfect sense about the panel. Thanks!
What about the battery? Does it plug straight into the converter at the the fuses too? When I look at the manual it looks like it connects to the thicker red wire above the 40 Amp fuse. But isn't that where power comes out? Like for the charging panel?
@@joshsmyrl1204 I'm thinking off memory here, but that first red wire connected to the 40 amp fuse should be power coming in from the battery. That's how power is supplied from the battery and also how the battery is charged. The idea of power coming (in and out) can be confusing & deceiving. In reality trace how Power flows through any circuit, electrons flow negative to positive.
Do you have a photo or video showing the wiring to the batteries? Also what lighting do you use?
Is the charger for lithium or wet cell batries?
How many lights can you hook up to one 12v fuse and can you have different on/off switches working those different lights?
HEY MARK NICE JOB ON THE POWER . I JUST STARTED MY BUILD AND AM READY FOR POWER I LIKE YOUR SET -UP BUT CAN YOU ADD A POWER INVERTER TO YOUR SYSTEM
FOR KITCHEN APPLIANCES / HOW CAN I DO THAT AND IF SO DO YOU HAVE ANY LINKS SO I CAN BUY THE SAME PRODUCTS AS YOU I VERY MUCH APPECIATE IT
question I’m thinking about buying a fully enclosed utility trailer for my lawn care business and I want to install an electrical panel and inverter with built in transfer switch and shore power connector so I’m wondering should I connect a ground wire to the trailer frame so that the frame is grounded when pluged in to shore power
Add a video on your small business
I dont think many would find it interesting?
What did you ground to on the dc side to allow you to have full dc power without the battery turned on.
Grounded to the frame, but still ran a separate ground cable to a ground buss-bar, which further connects ground to the power unit. The LED lights on a dimmer got thier own ground wire, wired in parallel.
Hello! I noticed on your shot of the battery switch on the inside you have what looks like 3 wires? Would you mind explaining these? In your diagram it looks like one would come from the battery ground and you’d have another going to the power converter? What’s the other wire for? A separate ground? Thank you!
I hear ya, it's a basic diagram showing opening and closing the ground instead of the positive side. But you are right. The switch has two posts, one is direct off the battery, the other post has a wire that goes to a ground buss bar, a ground to the power unit, and a ground that runs outside to the trailer brake emergency battery. The trailer came wired one way, and I had to modify it to my needs. I suppose just going to a ground buss bar would have been enough, BUT! when electrical problems arise its usually a ground problem, so I take grounding in a 12v trailer seriously. Lol.
Great vid.
Can you provide any specs on your trailer.
interior / exterior dimensions of your trailer ( I'm thinking you want >= 7ft otherwise would feel cramped up ?)
what's the apx total you have into this project.
Are you looking to camp in it or make it into a business? It's 8.5x18.
@@MTsubfly a business, will have workbench.. 40" sanding belt.. grinder/polishing wheel
what is your inside height you didn't look cramped ..
thanks for your reply
@@safeway3168 cool yea I think I ordered it at 7ft 6inches. Double R trailers in Nampa, ID will build you whatever you want. They are very good at that. So many run of the mill trailers with extra height are barely 7ft, so it make a big difference.
@@MTsubfly thank-you for the info... yeah I thought the height is key. Will look them up.
Best of success with your biz.
Did you have any schematics from this wiring? I’m working on gathering all my major electrical now and will wire it up in the next few weeks
no i dont have schematics. I used pretty simple circuits, and since everyone has different needs, you know it's like wire it up the way you need it. You got this Terrence!
How much did this setup run you
Who makes the awning that you have mounted outside with speakers?
Solera/lippert!
@@MTsubfly Thank you!
Question for you and commentors: Is it better to use two 12 volt batteries in parallel or two 6 volt batteries in series? Thanks!
2 12v
#1 rule... use stranded wire, NOT romex.
You said the max battery protection is 30, but you have a 40 amp fuse in the slot...makes me worry about all you wiring.
It's all good, I talked with the progressive dynamics engineer about the battery supply wire gauge they supplied. 40 amps is really to protect a short to ground, or reverse polarity from incorrect wiring. Each circuit thereafter is protected by a 15 amp fuse. Even a tiny spark from a short would blow a 15 amp.
Do you have a insta gram of pics of your store ?
dump the MR heater LP get a chinese diesel heater for $200