I LOVE how excited you get when you finally look at how WELL the Spark plug wires turned out. It looks authentic and wicked to me as well. Amazing work.
Some of the best advice I've gotten for wiring. Wonderful video. I haven't built a model since I was in my teens until about 3 years ago. I'm 69 years old now. Thank you for all this fantastic advice Mark.
Wow! What a great idea! I'm just getting back into modeling and I'm trying to create detail like this on my models and I'm so happy I found this video. You opened up so many possibilities for me and it looks so easy. I can't wait to try this technique. Thank you for this video. Blessings to you.
Thank you very much for watching and the kind words. The most important tools I have in my shop are the best tweezers you can find and a good magnifying visor. My fingers are too fat to pick up the small stuff, and my eyes are too tired to see what I have in my hand. LOL Have a great day.
I wish i had watched this a week ago. Im doing the 78 GMC and used blue Cat 6 wire, but started at the distributor towards the heads. This looks soooo much easier! Thanks for the video!!
I remember as a kid using thread and thinking it looked just OK but better than without anything. Over the years i tried all kinds of things and discovered solder and soft beading wire. Just wired up the engines on a 1/32 scale B-17 with bronze colored beading wire and am completely satisfied with the results. Enjoyed the video, thank's.
Great info and inspiration Mark. I will say I find it easier to load up the distributor and then feed it out to the plug holes, leaving enough length that i don't even trim the plug end of the wire, just feed it end and the bending holds it in place. But I never considered that fine solder wire... looks so much easier. Thank you for sharing your craftsmanship...
Thanks again for watching. That solder wire is so nice to use on so many different things. The plug size is perfect for battery cables, vacuum lines, linkage, brake lines, and throttle cable. I have a little bigger size too that I use on heater hoses, PCV lines, and brake booster line. They bend so nicely and hold their shape. That's why I quit going from the distributor out. I don't have to fuss with trying to drill all those tiny holes. LOL Have a great day.
@@grandpamarkshobbies Confession time... on models that come with cheap/bad distributor molds, I will cut a small cross-section of aluminum tubing just larger than the distributor and just have my wires ready, slip the tube over the distributor and fill with epoxy ... wait until it's gummy and push the wires in. I'm willing to trade "clean but symbolic" ... for "sketchy but real" most of the time .. if that makes sense.
GREAT ideas here, TY for sharing your model making tips. I am thinking of getting back into this hobby. I did it as a child with gooey messy model glue and zero patience. lol
Thank you very much. If you are thinking of getting back into it, we have a Facebook group called GrandpaMark's Hobbies that you can join. There's quite a few of us that got back into it that will be glad to answer any of your questions.
Thank you very much. A very wise man turned me on to using solder, and for me it was a game changer. I've tried so many different techniques that didn't work that for a long time I just didn't wire anything. Then he showed me the solder and I've been digging in deep ever since.
Thank you very much. When I was growing up it always bothered me that there was no way to run plug wires. I use to try gluing thread to the blocks and distributor. It was not good. LOL
Thank you for the tips and suggestions. Like the plug wire technique, well done. I also appreciate it when you call out the paints you use, like "Rubber Black". Wasn't aware that existed.
Thank you very much. I'll make sure I do a better job with the color call outs. I do love that Rubber Black. It looks exactly like the name too. Perfect color for so many things.
What a great idea with the solder and cat5 cables. I used to build models when I was younger and had time and did a pretty good but this is on another level. Hopefully find time again in the future and give this a try. Thanks for this.
Thanks for all the useful info! I appreciate you also adding the links to everything you use as well. Looking forward to using your techniques in my future builds! Thanks GrandpaMark!
Thank you for sharing and showing how it's done!! 😊 tried it myself this week and it's really easy to do, and has a great looking result!! Had to buy the solder online because diy shops over here don't sell solder so thin
What an amazing video! Thank you sir; what an inspiration. Like you guys, I love to detail my model car engines to the best of my ability, even though it is time consuming and can be very frustrating (especially when a small piece of "ready to fit" wire goes flying off the bench only to be eaten by the carpet monster). However, despite needing the patience of a rock, we all appreciate how a wired and plumbed engine can be very rewarding once completed. I am going to try this solder-wire method. It is difficult for me to buy model car wiring & plumbing products as I live in the UK, plus they are expensive. Therefore, I am always looking for alternatives. I have found some small-gauge covered wires, such as that used for jewellery, too springy, so my next project will use solder wires, if I can get the right diameter. Thanks for the links, too.
I am one cheap son of a gun, and there was no way I was going to drop 9 or 10 bucks per engine on plug wires. I went the rout of drilling out the distributer, and that was more frustrating than just about anything I've ever done above water. So I had a spool of solder and thought I can do everything backwards. It's so much easier and doesn't make me want to over do adult beverages in the process. I hope you can find something close, because for just about 10 US you can do an entire car lot worth of engines. Thanks for watching and have a great day.
I used CAT6 cables for intricate wiring also in previous projects... I also use them by twisting them to make tow truck steel cables. Using solder is a great idea. Never seen this until now. I'll have to give that a shot someday.
Mike, thanks for watching and the subscribe. I'm planning on a bunch more videos as my builds go on. I'll try and make them a lot shorter than this one, and I plan on doing an abbreviated version of my plug wires.
I found your video on Reddit and gave the video a share on my YT channel. I’ll give you a shoutout in my next video and try and get you some more subscribers!
I like those little drills .some hockey stick tape or similar wrapped around the shaft would give you more purchase when drilling. Great job by the way .
I have to thank you for subscribing. I will be doing at least an update video once a week, and more of the How Too videos whenever I get to a part of the build where I can do one.
Thank you for watching. I'm glad I could help. I'm going to have more videos as my builds come along. Hope you get a chance to check in from time to time.
Thank you very much. Your comment just made my day. If you have any questions please shoot me a comment, or you can join the GrandpaMark's Hobbies group on Facebook. There's a lot of good people there that would love to help.
Thank you very much. If you have any questions you can always ask them here or jump on Facebook at GrandpaMark's Hobbies and join our group. There's some people there that know what they are talking about and would love to help.
Kool video sir. Mike from scale Speedworks sent me over. I'm diggin your work. I subbed your channel and will be waiting for more to come. Take care and happy modeling. Don 😎
The build it for you advice is GREAT advice, stop copying or following the pack and build something different and kool!! Love the vid, you've got a new sub
enjoyed your video, i am currently working on a 78 GMC 4x4 and puting a blown 350 in, I decided i'd go down to the cable office and get a scrape of phone wire; i am using that for the plug wires. don't know the size of them, but they are small indeed.
Where do you find fine solder? The British call it fuse wire but I ve talked to local shops and Micro Mark tools and no one has anything that fine. Shep Paine used it for piping and wiring in his models, calling it "gizmology", so it's been around for awhile. But I can't find it.
I'm not sure if you can order it in England from Amazon, but this is the link to what I got. It's nine dollars US. www.amazon.com/Rosin-Solder-Electrical-Soldering-0-3mm/dp/B08M5XDKFG/ref=sr_1_2_sspa?crid=IDCHYDSO4CH0&keywords=.3mm+solder&qid=1666436065&qu=eyJxc2MiOiI0LjE0IiwicXNhIjoiMy40NiIsInFzcCI6IjMuMzQifQ%3D%3D&sprefix=3mm+solder%2Caps%2C100&sr=8-2-spons&psc=1
Thank you. most hoses are 5/8 ID hoses, which would make the outside diameter of 3/7 inch. At 1/24th scale that would be .79something mm so I use .8mm solder. I think it looks just right.
G'day Grandpa mark just wondering with all these tips do you have any on how to make the lead terminals on the battery and then add the wire too it, I've tried to flat lead but just doesn't look right, do you have any ideas? Love a video on that if you got one... Cheers mate
Awesome I can't wait to see it... I've built a lowrider version of an El Camino... I'm building a 1965 Pontiac Bonneville at the moment, haven't seen many of those yet...
@@grandpamarkshobbies believe it or not I actually have model kits. I saved some muscle cars I bought in the early 90’s. I remember being shocked that they cost about $10 a kit!!!! I think they were $5 or $6 when I was a kid. Thanks again for the great video. I’m totally going to get back into it. I think I need new glue and , that may be dried up by now!!
For sure the prices have gone through the roof. I remember getting them for around 2.50 to 3 bucks. Just wait till you try some of this new glue. It dries super fast, and doesn't make you want to sing Purple Haze while you are building. LOL
Could you airbrush the solder ? Do they make .3 wire? What size would it be ? I have #30 AWG wire and it looks a little big on a 1/25th scale , i was told it was the correct size, anybody out there please help me, I'd rather use wire than solder
I've never airbrushed the solder before. I think it would bend away from the air. I'm not sure what gauge .3mm would be, but #30 AWG is going to be very close. it is almost the same size. so it should look good on your engine.
I use white glue and a toothpick. I roll a dab on the solder and when it dries I paint it the color I want for the boot. Then I paint the solder for the wire color. It works great.
@@grandpamarkshobbies I watched one of you're videos where you stick a Needle or something in a black wire or something then you make it round and do the other end the same way
No that wasn't me. I always use the white glue. The video with the needle was when I made the return spring. I only do the boots on the engine side. The side with the distributor usually doesn't show.
Darrell, first off, I'm not sure if "Screw Him" was necessary or not, but OK. Second off, that's a dang good idea. My problem is my hands shake and I just can't thread that needle.
I use Lightworks. You can use the free version and do some good work. It takes a while to learn, and the free version limits you to SD on your uploads, but once you get rolling and learn it you can get the paid version for about $130. With that you get the title maker and a lot more transitions. It will also let you use Greenscreen too. If you have any questions look up my GrandpaMark's page on Facebook and I'll help you any way I can. By the way, I gave your channel a subscribe. Looking forward to seeing what you do.
@@grandpamarkshobbies sorry i don't understand your answer. What paint did u use to paint the solder wires? It does not crack when you are manipulating them into position.
One of the best tutorials on TH-cam of any subject!
Thank you very much. You just made my day.
I LOVE how excited you get when you finally look at how WELL the Spark plug wires turned out. It looks authentic and wicked to me as well. Amazing work.
Thank you. I do get excited sometimes. LOL
All these years and I've never thought about using solder for wires and hoses 🤷♂️, great video Mark.
LOL. Trust me, I'm not smart enough to come up with that one on my own. I was told how to do that a few years ago, and have never looked back.
That solder idea is awesome ,you have changed the way I wire an engine. Thank you for your channel.
You just made my day!!!! Thank you very much.
Great vid, coming at model cars from a place of ignorance about how engines are actually wired up so this really helps
You just made my night. If you have any questions give me an email and I'll do what I can to help.
Some of the best advice I've gotten for wiring. Wonderful video. I haven't built a model since I was in my teens until about 3 years ago. I'm 69 years old now. Thank you for all this fantastic advice Mark.
You are very welcome. It was a game changer for me. Just one thing, once you get into using that solder you will find so many uses for it.
Suddenly I’m not afraid to do plug wires! Thanks!
Thank you. It is a lot easier doing it tils way. . . At least it is for me. LOL
After watching this I think I’ll try using solder. I’m definitely getting those drill bits. Thanks.
No kidding around. Solder has changed the way I build my engines. So much easier.
I wish I still had steady hands like you do. Nice method.
Thank you very much. Some days are better than others, those days I take advantage of.
Wow! What a great idea! I'm just getting back into modeling and I'm trying to create detail like this on my models and I'm so happy I found this video. You opened up so many possibilities for me and it looks so easy. I can't wait to try this technique. Thank you for this video. Blessings to you.
Thank you very much for watching and the kind words. The most important tools I have in my shop are the best tweezers you can find and a good magnifying visor. My fingers are too fat to pick up the small stuff, and my eyes are too tired to see what I have in my hand. LOL Have a great day.
I wish i had watched this a week ago. Im doing the 78 GMC and used blue Cat 6 wire, but started at the distributor towards the heads. This looks soooo much easier! Thanks for the video!!
It is a lot easier. I haven't done it with Cat 6, but with .3mm solder it is about as easy as it gets.
I remember as a kid using thread and thinking it looked just OK but better than without anything. Over the years i tried all kinds of things and discovered solder and soft beading wire. Just wired up the engines on a 1/32 scale B-17 with bronze colored beading wire and am completely satisfied with the results.
Enjoyed the video, thank's.
I wish they would let you post that picture in the comments. I'd love to see it, I love the B-17s. They were true work horses.
@@grandpamarkshobbies I am going to try and send you an email with pics. Let me know if you get it.
Will do. Thanks.
Currently working on a '68 Mustang GT and want to do something similar to this. Your video REALLY helped me out. Thank you.
Thank you very much. I'm glad it helped.
Great info and inspiration Mark. I will say I find it easier to load up the distributor and then feed it out to the plug holes, leaving enough length that i don't even trim the plug end of the wire, just feed it end and the bending holds it in place. But I never considered that fine solder wire... looks so much easier. Thank you for sharing your craftsmanship...
Thanks again for watching. That solder wire is so nice to use on so many different things. The plug size is perfect for battery cables, vacuum lines, linkage, brake lines, and throttle cable. I have a little bigger size too that I use on heater hoses, PCV lines, and brake booster line. They bend so nicely and hold their shape. That's why I quit going from the distributor out. I don't have to fuss with trying to drill all those tiny holes. LOL Have a great day.
@@grandpamarkshobbies Confession time... on models that come with cheap/bad distributor molds, I will cut a small cross-section of aluminum tubing just larger than the distributor and just have my wires ready, slip the tube over the distributor and fill with epoxy ... wait until it's gummy and push the wires in. I'm willing to trade "clean but symbolic" ... for "sketchy but real" most of the time .. if that makes sense.
It sure does. I have one that I'm going to use in my 24 hour build this Jan. that doesn't have a distributor. LOL So I'll be doing the same thing.
WOW! What patience. Really enjoyed this, thank you.
Thank you very much.
GREAT ideas here, TY for sharing your model making tips. I am thinking of getting back into this hobby. I did it as a child with gooey messy model glue and zero patience. lol
Thank you very much. If you are thinking of getting back into it, we have a Facebook group called GrandpaMark's Hobbies that you can join. There's quite a few of us that got back into it that will be glad to answer any of your questions.
Easy to see grandpa Mark has done this a few times lol thanks for sharing your experience with this 👍🏻
Thank you very much. A very wise man turned me on to using solder, and for me it was a game changer. I've tried so many different techniques that didn't work that for a long time I just didn't wire anything. Then he showed me the solder and I've been digging in deep ever since.
Excellent Mark! Thanks for showing us how to do it!
Thank you very much.
Was looking for the drillbits thanks. good idea. Always hated the way engines looked, the wires are definitely worth the effort.
Thank you very much. When I was growing up it always bothered me that there was no way to run plug wires. I use to try gluing thread to the blocks and distributor. It was not good. LOL
Thank you for the tips and suggestions. Like the plug wire technique, well done. I also appreciate it when you call out the paints you use, like "Rubber Black". Wasn't aware that existed.
Thank you very much. I'll make sure I do a better job with the color call outs. I do love that Rubber Black. It looks exactly like the name too. Perfect color for so many things.
This is the best and most informative video I have seen in a very long time! Thanks!
Thank you. You just made my day.
Excellent technique and tutorial for the plug wires. Thanks for sharing.
Thanks for watching.
Thank you for this tutorial- plug wires have always been my nemesis, I'm sure there is a learning curve to get thru, but the results look promising
When you try my way you'll never want to do them any other way. It's so easy and looks so good.
What a great idea with the solder and cat5 cables. I used to build models when I was younger and had time and did a pretty good but this is on another level. Hopefully find time again in the future and give this a try. Thanks for this.
Thank you very much. I hope you can get back into it. If you have any questions give me a shout.
Best wiring video on YT! Thank You
Wow, thank you very much. Thanks for watching.
Fishing cable works too,tons of dif. sizes👌Nice video,thx to share.
I'll have to check that out. Thanks.
Excellent tips Mark, I’ve tried several different materials for plug wires…can’t wait to give solder a shot!
I hate to say it, but once you try solder you are going to find so many things you can use if for.
Great way of making plug wires and boots.
I had a heck of a time getting boots to look scale. I got frustrated one night and tried this and never looked back.
I too just found your channel.Really like the tutorial on the plug wires.Would never had thought about using solder. Great video! Im subbed.
Thanks for the sub. I'm glad it helped. I'm going to have a bunch more videos soon.
Thanks for all the useful info! I appreciate you also adding the links to everything you use as well. Looking forward to using your techniques in my future builds! Thanks GrandpaMark!
Thank you very much. I'm glad I could help.
Great idea for plug wires!
Thank you very much.
Thank you for sharing and showing how it's done!! 😊 tried it myself this week and it's really easy to do, and has a great looking result!! Had to buy the solder online because diy shops over here don't sell solder so thin
I am so glad you had good results. I couldn't find the right size here either, had to go through Amazon. Now I have enough to do a thousand cars. LOL.
1:05 those puppies snap if you look at them sideways, hahaha!
Top video and thanks for adding it 👍😊
LOL they sure do. Thanks for watching and the kind words.
What an amazing video! Thank you sir; what an inspiration. Like you guys, I love to detail my model car engines to the best of my ability, even though it is time consuming and can be very frustrating (especially when a small piece of "ready to fit" wire goes flying off the bench only to be eaten by the carpet monster). However, despite needing the patience of a rock, we all appreciate how a wired and plumbed engine can be very rewarding once completed.
I am going to try this solder-wire method. It is difficult for me to buy model car wiring & plumbing products as I live in the UK, plus they are expensive. Therefore, I am always looking for alternatives. I have found some small-gauge covered wires, such as that used for jewellery, too springy, so my next project will use solder wires, if I can get the right diameter. Thanks for the links, too.
I am one cheap son of a gun, and there was no way I was going to drop 9 or 10 bucks per engine on plug wires. I went the rout of drilling out the distributer, and that was more frustrating than just about anything I've ever done above water. So I had a spool of solder and thought I can do everything backwards. It's so much easier and doesn't make me want to over do adult beverages in the process. I hope you can find something close, because for just about 10 US you can do an entire car lot worth of engines.
Thanks for watching and have a great day.
Keep the detail videos coming . Thanks
I have one scheduled to come out Friday on filling pin holes with talc. It's not as long as this one for sure. LOL Thanks for watching.
I used CAT6 cables for intricate wiring also in previous projects... I also use them by twisting them to make tow truck steel cables.
Using solder is a great idea. Never seen this until now. I'll have to give that a shot someday.
CAT6 is a great size. I've used it before. If you like that you will love this solder. It's easy to run, and stays put.
I'm 22. good luck with the channel.
Thanks for the subscribe, and watching my video.
AWESOME vid....nice build...great ideas...ty....MOPAR 4 EVER.
Thank you very much.
Great ideas for hour hobby and inspirational, Keep it rolling Grandpa, lll pass it on to my grandkids
Thank you. That's why I made this channel.
Thanks for your video and explanation. I found it very helpful and I have subscribed to your channel. Looking forward to more helpful videos! 👍 - Mike
Mike, thanks for watching and the subscribe. I'm planning on a bunch more videos as my builds go on. I'll try and make them a lot shorter than this one, and I plan on doing an abbreviated version of my plug wires.
I found your video on Reddit and gave the video a share on my YT channel. I’ll give you a shoutout in my next video and try and get you some more subscribers!
I like those little drills .some hockey stick tape or similar wrapped around the shaft would give you more purchase when drilling. Great job by the way .
Great idea. I'll see if I can find any around here.
great idea with the solder for wiring. now to find that size solder.
Here's the link to the one I got on Amazon. www.amazon.com/gp/product/B08M5XDKFG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
What a great idea! I've been hearing about your channel through other modeling channels. So decided to check you out, and definitely subscribing
I have to thank you for subscribing. I will be doing at least an update video once a week, and more of the How Too videos whenever I get to a part of the build where I can do one.
Awesome video keep up the great work
Thank you very much.
Just dropped an Amazon order for these bits! Thanks for the tip!
Thanks for watching. I sure hope you like it as much as I do.
@@grandpamarkshobbies You're welcome ! Thanks for you're content! The bit set arrived today and they are really nice!
I'm so glad you like them.
Very nice and neat work!!
Thank you. I want to do an abbreviated version of this soon along with some other fun things.
I learn something new every day, Thank you for sharing 👍
Thank you for watching. I'm glad I could help. I'm going to have more videos as my builds come along. Hope you get a chance to check in from time to time.
Very nice job brother, really clean work 😎👍
Thank you.
Awesome tutorial great tips hope to try this out
Thank you very much. Just one thing, once you try it you will never not use it. It's that easy and looks so good.
That was worth watching, thanks for the great video, learned a lot.. 🇨🇦
Thank you very much. Your comment just made my day. If you have any questions please shoot me a comment, or you can join the GrandpaMark's Hobbies group on Facebook. There's a lot of good people there that would love to help.
That's awesome never thought of solder for wiresthanks for the tip
You are welcome. Thanks for watching. I'm going to try and post a new video every Friday.
Killer job on the engine so far very nice work👊
Thank you very much.
dude this is amazing! you are a great teacher
Thank you very much. If you have any questions you can always ask them here or jump on Facebook at GrandpaMark's Hobbies and join our group. There's some people there that know what they are talking about and would love to help.
Kool video sir. Mike from scale Speedworks sent me over. I'm diggin your work. I subbed your channel and will be waiting for more to come. Take care and happy modeling. Don 😎
Thank you. I know this one is long. My next build I'll do one that is much shorter.
Thanks for showing this method
You are very welcome. It is a lot easier to handle the solder. It stays put and bends easy.
The build it for you advice is GREAT advice, stop copying or following the pack and build something different and kool!! Love the vid, you've got a new sub
Thank you very much. I've never been one to follow the crowd. There's always another way to make it yours. Thanks for the sub, have a great day.
I just found your videos,I love them .
I also subscribed too
Thank you very much. I'm glad you like them.
Nice tutorial! I will have to try this....
Thanks. Let me know how you like it.
enjoyed your video, i am currently working on a 78 GMC 4x4 and puting a blown 350 in, I decided i'd go down to the cable office and get a scrape of phone wire; i am using that for the plug wires. don't know the size of them, but they are small indeed.
Thank you very much. I hope you have a blast wiring your 350. Once you start it's like chips, you just have to do another one. LOL
Great detail!! Thanks for sharing.
Thank you for watching. I'm planning on doing a bunch more.
such an awesome job and ideas I'll use , thank you
You are very welcome. Thanks for watching.
hi Mark... very useful video... thx 4 sharing... vinny
I'm glad you liked it. I've been using solder for years. It's so much easier to work with than wire.
This is SO good!
Thank you very much.
Great presentation
Thank you very much. I hope it helps.
@@grandpamarkshobbies From one Grandpa Mark to another appreciate your contribution to the hobby.
Thank you Grandpa. You just made my day.
Thanks for the great tips!
Thank you for watching, and I'm glad you liked it.
I just found your channel and subbed you. I am looking forward to viewing your videos
Thank you. I just started making videos, but have big plans for some of the things I do for very little cost that help make a big difference.
Awesome tips......I have shaky hands and wiring has been a challenge. Maybe solder is the key!😄😄😄
Thank you. The hardest part is getting the wires into the heads. The rest isn't that hard to make look good.
Very cool tutorial keep showing more 🤘on
Thank you. I'm going to try for one a week for a while.
So great! Super helpful!
Thank you very much. Let me know if you try it.
Real cool mate👍
Thank you very much.
Where do you find fine solder? The British call it fuse wire but I ve talked to local shops and Micro Mark tools and no one has anything that fine. Shep Paine used it for piping and wiring in his models, calling it "gizmology", so it's been around for awhile. But I can't find it.
I'm not sure if you can order it in England from Amazon, but this is the link to what I got. It's nine dollars US. www.amazon.com/Rosin-Solder-Electrical-Soldering-0-3mm/dp/B08M5XDKFG/ref=sr_1_2_sspa?crid=IDCHYDSO4CH0&keywords=.3mm+solder&qid=1666436065&qu=eyJxc2MiOiI0LjE0IiwicXNhIjoiMy40NiIsInFzcCI6IjMuMzQifQ%3D%3D&sprefix=3mm+solder%2Caps%2C100&sr=8-2-spons&psc=1
Nicely done looks great gave you a sub
Thank you very much.
Great video just subbed too great tips👍🤘👊
Thanks for watching, and the sub. I really appreciate it.
Amazing, thank you, quick question, what size solder for hoses?
Thank you. most hoses are 5/8 ID hoses, which would make the outside diameter of 3/7 inch. At 1/24th scale that would be .79something mm so I use .8mm solder. I think it looks just right.
Thank you , that looks to be a lot easier than what I have been doing.
You are very welcome. It does make it easier.
Not bad for a guy with sausage fingers! You made it look easy. 👍
LOL. It's even easier than it looks.
Awesome! Won’t the paint crack when you bend the solder?
Sometimes it will, but most of the time it holds well.
Great video thanks for sharing
Thank you for watching.
Thank you for the tips
You are very welcome. Thanks for watching.
That is awesome!
Thank you very much. I sure try and get all I can out of a kit.
I don't see the link or info for those hand drills
Here you go. These are the one's I use now. www.amazon.com/gp/product/B07S636JHY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Building that kit now
You are going to have a good time with that kit. It's a lot of fun.
G'day Grandpa mark just wondering with all these tips do you have any on how to make the lead terminals on the battery and then add the wire too it, I've tried to flat lead but just doesn't look right, do you have any ideas? Love a video on that if you got one... Cheers mate
Thank you for watching. I do not have a battery video as of yet, but I will be making one when I make the El Camino build.
Awesome I can't wait to see it... I've built a lowrider version of an El Camino... I'm building a 1965 Pontiac Bonneville at the moment, haven't seen many of those yet...
I've never done a Lowrider. . . .Yet. LOL
Mark can you please put the link to the solder and finger drill bits so I can order them thx!
www.amazon.com/Rosin-Solder-Electrical-Soldering-0-3mm/dp/B08M5XDKFG/ref=sr_1_1_sspa?crid=12YML155MX7AQ&keywords=.3mm+solder&qid=1666662547&qu=eyJxc2MiOiI0LjExIiwicXNhIjoiMy4zOCIsInFzcCI6IjMuMjgifQ%3D%3D&sprefix=3mm+solder%2Caps%2C107&sr=8-1-spons&psc=1 www.amazon.com/gp/product/B07ZFNJQH6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Great Info, thanks
You are very welcome. Thanks for watching.
Great video and a cracking idea...just subd and looking forward to future ideas. The question is......did you get the fireing order correct?
Thanks for watching and subscribing. You know after I made the video and watched it I realized that the order was right. Purely by accident. LOL
Keep it up!
Thank you. I will.
last model I build over 25 years ago, I used yellow sewing thread for spark plug wires
LOL. That's what I use to use too. Then I tried wire, but that's a pain in the behind to work with. LOL
@@grandpamarkshobbies very cool video, you have me wanting to get back into this hobby! thanks!!
Do it!!! It is good for keeping my hands and fingers nimble. There are some great kits out there that are a lot of fun to do.
@@grandpamarkshobbies believe it or not I actually have model kits. I saved some muscle cars I bought in the early 90’s. I remember being shocked that they cost about $10 a kit!!!! I think they were $5 or $6 when I was a kid.
Thanks again for the great video. I’m totally going to get back into it. I think I need new glue and , that may be dried up by now!!
For sure the prices have gone through the roof. I remember getting them for around 2.50 to 3 bucks. Just wait till you try some of this new glue. It dries super fast, and doesn't make you want to sing Purple Haze while you are building. LOL
That’s was pretty cool
Thank you very much. It's a very easy way to make a huge difference.
nice bit of work. I have niw subscribed
Thank you very much, and thanks for subscribing.
Could you airbrush the solder ? Do they make .3 wire? What size would it be ? I have #30 AWG wire and it looks a little big on a 1/25th scale , i was told it was the correct size, anybody out there please help me, I'd rather use wire than solder
I've never airbrushed the solder before. I think it would bend away from the air. I'm not sure what gauge .3mm would be, but #30 AWG is going to be very close. it is almost the same size. so it should look good on your engine.
Good content in this video, So I just sub to you and I'm looking forward to this kind of videos.
Thanks for the sub. I'm planning on a lot of how too videos. Hopefully a little shorter than this one. LOL
Love the content
Thank you very much.
What do you use to make the spark plug boots
I use white glue and a toothpick. I roll a dab on the solder and when it dries I paint it the color I want for the boot. Then I paint the solder for the wire color. It works great.
@@grandpamarkshobbies I watched one of you're videos where you stick a Needle or something in a black wire or something then you make it round and do the other end the same way
No that wasn't me. I always use the white glue. The video with the needle was when I made the return spring. I only do the boots on the engine side. The side with the distributor usually doesn't show.
Screw him ,buy paper clips covered in plastic what ever color you want remove it from the paper clip and cut your spark plug boots easy as that lol
Darrell, first off, I'm not sure if "Screw Him" was necessary or not, but OK. Second off, that's a dang good idea. My problem is my hands shake and I just can't thread that needle.
Excellent
Thank you very much.
Great video, Mark!
I'm trying to get my channel started, What editing program do you use?
I use Lightworks. You can use the free version and do some good work. It takes a while to learn, and the free version limits you to SD on your uploads, but once you get rolling and learn it you can get the paid version for about $130. With that you get the title maker and a lot more transitions. It will also let you use Greenscreen too. If you have any questions look up my GrandpaMark's page on Facebook and I'll help you any way I can. By the way, I gave your channel a subscribe. Looking forward to seeing what you do.
@@grandpamarkshobbies Thanks pal
Do you have the fire order on it?
The firing order for Chevy Big Block V8 engines (396, 406, 427, 454) is the same as the small blocks: 1-8-4-3-6-5-7-2
is so nice to have that kind of detail but I don't now in competitions they take care of that thanks for anwer and GFod bless.
I'm not sure if they even look that close. I just do it to keep my fingers nimble. LOL
@@grandpamarkshobbies Where you find those cables or wire I don't find the proper gauge for simulate 8.8 racing cables.
This is what I use. I think it's dead on. www.amazon.com/gp/product/B08M5XDKFG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Was the yellow paint enamel?
T.Y
That yellow is the under clear that is used during the chroming. If I left it in longer that would be gone too.
@@grandpamarkshobbies sorry i don't understand your answer.
What paint did u use to paint the solder wires? It does not crack when you are manipulating them into position.
I'm using Tamiya XF-3 Flat Yellow. The Tamiya paints do stick very well.
Thank you
You are very welcome. Thanks for watching.
I just sub to you. I am looking forward to this video. I will be back because I really want to watch this video
Thanks for the sub. I know it's a long video, but it does cover abut everything. I hope it helps.