You got a good one. I carried a G23 for years off duty. Then bought an AlphaWolf 9mm barrel for it. Most Glock fans think those early Gen guns were better anyway but even Clownifornia allows Gen 3. 🤦♂️. That G22 is an awesome option as well. With that conversion barrel for it you’re money, probably the best couple of pistols you can own.
@@OGsDangerShow I think I shoot my S&W M&P 40 better and it feels better in the hand, but I really think the old Gen Glocks are pretty good. Back when they didn’t care about frills like rails and optics cuts lol. I remember my oldest brother having a discussion about which handgun he’d buy if he got one (this is probably around 2000 or so) he said a Glock 17 or something like that, so maybe I just have some subconscious thing in my head I need to satisfy lol. The barrels I got were not lone wolf, they’re no-name but the fit like factory barrels. Drop right in.
Don't worry Cranky , soon you will only be able to have a sharp stick , you'll no longer have to wonder about which shootin iron you have to buy . Very sad , I'm looking for a forked stick and an old bicycle , Y , they will certainly work on banning those too , their theory would be silenced weapon without a license .
@@crankygunreviews Defensive round are actually cheaper in .40 than they are in 9mm. Target ammo 9mm is still cheaper. Federal HST in .40 is .47cpr vs Federal HST 9mm .80cpr
Keep puting the good videos out, work with what you can get; bolt, pump, lever and wheels. Go traditional for awhile with reviews! I shall be forever subscribed to someone who is stuck on the front lines against the anti-2A community in MASS. GOD BLESS🇺🇸
My friend, you can buy a gen 5 Glock in MA until October 23rd. I've bought several gen 4 and 5 Glocks brand new over the years. Just need to go to the right place. Ask around at the mill, they'll tell you how.
40 SW is just fine. I'm getting ready to pick up what may be my last semi-auto handgun as well. I went with an M18 and not because I am a sig fan, but just because it's the military's pistol and I have more than one glock so if it is going to be my last i figured that may be a good one to go with. The reason I say it may be my last is because I live in a blue state only a few states down and after this election it may be impossible. I hope not.
You have two good Glocks here.I had a Gen 2, 19 that I sold when I retired, couple years ago. I was nuts for doing that. Four years ago I got the Glock itch and bought a brand new Gen4. At the time, around 2010, the Gen 4 with the finger grooves was available so I bought it. Right away, I had the frame finger grooves removed and had the grip stippled to what I like. The factory texture nubs I never liked. The Gen2 are great guns, I wish still had mine they last forever and it felt better in my hand- the G19 that is. You did good on replacing the spring, gave it a little tune up. The finish was so much better on the older Glocks as well. You have two great shootres here enjoy
I am not a big .40 fan . I only have one,they never became what the Industry promised,but i think you made a great choice. It is bull how we are all in New England and have such varying rights.
@@michaelgraham8854 yep I agree the rights here are wack… the .40 isn’t a bad round, I actually think I prefer it to .45 ACP, but it’s snappy in a lot of guns.
@@crankygunreviews Reading magazines i thought it was going to be big. The one i got was a S&W shorty Forty limited edition. Great gun,back when the performance center did real stuff., Now you get the performance guns at Bass Pro.
I had a gen4 Glock 22 as a duty weapon. When I retired I purchased a 9mm conversion barrel from Optics Planet, it functioned with FMJ but failed miserably with hollow points. Ultimately I sold the G22 gen4 because an injury from an accident I couldn't pull the slide back on it. However I purchased a new G17 gen3 and with the single recoil spring I can pull the slide back easier. Do I believe the 9mm is better than the 40 NO.
I just don’t understand states like MA. They let criminals walk free, and they put law abiding citizens in jail for exercising their constitutional rights. Crazy.
Many FFL'S were selling gen 4-5 glock frames, then all that was needed was to buy a completed slide to finish your build and then file the EFA10 within 7 days of completion. Even GOAL (they have an FFL) was doing this. Admittedly, now with new laws hard to say whats going to happen now.
I do know that, but it’s legally questionable, though legal, so I try not to talk about it too much on public arena- I try to stay above board on everything I do
+1 Subbed. I'm in Westernmass. Just a reminder, it's business as usual with remaining inventory of semi auto firearms at FFL's until Oct 24, 2024 when 4885 becomes law. Pricing is completely stupid from panic buying. May I suggest a trip to the mill in littleton, ma if you have time. IYKYK about the mill. I love to spread the word of misery when it comes to firearm laws in Mass. Older Fudds are waking up and are not happy with having to get a LTC to possess a Semi Auto Anything. Same response "I ain't doing she-it." Hopefully the petition to recall 4885 will happen and there will be a another year of business as usual for all the FFL's. If not most FFL's will close up shop. Until then hoping SCOTUS will hear 1 of 7 lawsuits ending this crap. Cheers!
@crankygunreviews +1 for the mill in Littleton, theyll get you whatever you want, doesnt have to be on the list or pre ban. I suggest dean saftey and kagarms.
why do people think you cant own a brand new Glock 20 5th gen in ma? all you need to do is build it buy a kit and register it then totally legal and transferable
@@crankygunreviews ya I gotcha and what you have is very nice I own a couple, all I was trying to do was spread the word if anyone wanted one before oct cause like you said after that good luck
You got a good one. I carried a G23 for years off duty. Then bought an AlphaWolf 9mm barrel for it. Most Glock fans think those early Gen guns were better anyway but even Clownifornia allows Gen 3. 🤦♂️. That G22 is an awesome option as well. With that conversion barrel for it you’re money, probably the best couple of pistols you can own.
@@OGsDangerShow I think I shoot my S&W M&P 40 better and it feels better in the hand, but I really think the old Gen Glocks are pretty good. Back when they didn’t care about frills like rails and optics cuts lol. I remember my oldest brother having a discussion about which handgun he’d buy if he got one (this is probably around 2000 or so) he said a Glock 17 or something like that, so maybe I just have some subconscious thing in my head I need to satisfy lol.
The barrels I got were not lone wolf, they’re no-name but the fit like factory barrels. Drop right in.
Imagine seeing you here, I like your current channel and sub.
@@thefrogking481 👍
Don't worry Cranky , soon you will only be able to have a sharp stick , you'll no longer have to wonder about which shootin iron you have to buy .
Very sad , I'm looking for a forked stick and an old bicycle , Y , they will certainly work on banning those too , their theory would be silenced weapon without a license .
@@tomstone6247 yep
40 caliber ammo cheaper than 9mm ammo, a new barrel for $60/$70. That's Awesome bro.
40 cal ammo is NOT cheaper than 9mm. I meant the 40 S&W guns are cheaper than the 9mm guns. No one likes 40 S&W anymore it seems
@@crankygunreviews in Brasil you see a Lot of 1911 in 40 sw
@@lootlovers-oluz9534 oh that’s cool!
@@crankygunreviews Defensive round are actually cheaper in .40 than they are in 9mm. Target ammo 9mm is still cheaper. Federal HST in .40 is .47cpr vs Federal HST 9mm .80cpr
Keep puting the good videos out, work with what you can get; bolt, pump, lever and wheels. Go traditional for awhile with reviews! I shall be forever subscribed to someone who is stuck on the front lines against the anti-2A community in MASS.
GOD BLESS🇺🇸
Thanks man! You don’t know how much that means! I’m hoping to do some rimfire stuff soon. Maybe a lot of it.
On that G23 and G22 with the 9mm barrel, the ejector should be swapped for a G19 G17 they have an angle to hit the smaller diameter 9mm case.
I haven’t had any issues with ejection on the 23. Haven’t shot the 22 yet
We will fight these bad laws. I'm not running away.
@@warrenharrison9490 awesome!
My friend, you can buy a gen 5 Glock in MA until October 23rd. I've bought several gen 4 and 5 Glocks brand new over the years. Just need to go to the right place. Ask around at the mill, they'll tell you how.
I know how, but most shops won’t sell them. A “kit” with upper/lower is one thing. A full gun is different.
40 SW is just fine. I'm getting ready to pick up what may be my last semi-auto handgun as well. I went with an M18 and not because I am a sig fan, but just because it's the military's pistol and I have more than one glock so if it is going to be my last i figured that may be a good one to go with. The reason I say it may be my last is because I live in a blue state only a few states down and after this election it may be impossible. I hope not.
@@mcb2757 yep- good luck to you too my friend
You have two good Glocks here.I had a Gen 2, 19 that I sold when I retired, couple years ago. I was nuts for doing that. Four years ago I got the Glock itch and bought a brand new Gen4. At the time, around 2010, the Gen 4 with the finger grooves was available so I bought it. Right away, I had the frame finger grooves removed and had the grip stippled to what I like. The factory texture nubs I never liked.
The Gen2 are great guns, I wish still had mine they last forever and it felt better in my hand- the G19 that is.
You did good on replacing the spring, gave it a little tune up. The finish was so much better on the older Glocks as well.
You have two great shootres here enjoy
Thanks for the vote of confidence. I came to the realization that what I hate about Glocks (blocky and ugly grips) is actually what I like about them.
I am not a big .40 fan . I only have one,they never became what the Industry promised,but i think you made a great choice. It is bull how we are all in New England and have such varying rights.
@@michaelgraham8854 yep I agree the rights here are wack… the .40 isn’t a bad round, I actually think I prefer it to .45 ACP, but it’s snappy in a lot of guns.
@@crankygunreviews Reading magazines i thought it was going to be big. The one i got was a S&W shorty Forty limited edition. Great gun,back when the performance center did real stuff., Now you get the performance guns at Bass Pro.
@@michaelgraham8854 yeah the old performance center all hand tuned were awesome. What was the shorty 40 based on? Like a 4046?
Basically a chopped 4006, with a briley bushing and fancy sculpting of the slide, 9 round mag too I think.
Basically a 6906 in .40.
Nice
I had a gen4 Glock 22 as a duty weapon. When I retired I purchased a 9mm conversion barrel from Optics Planet, it functioned with FMJ but failed miserably with hollow points. Ultimately I sold the G22 gen4 because an injury from an accident I couldn't pull the slide back on it. However I purchased a new G17 gen3 and with the single recoil spring I can pull the slide back easier. Do I believe the 9mm is better than the 40 NO.
40 is such an interesting caliber. The wolf conversion barrels are AMAZING!!!!
Mines not a wolf barrel, but I’ve been pretty happy with mine so far- slight shift in impact with 9mm but still pretty accurate
Cmon C, gen 3, 4 and 5 are only available for thugs.
🤣🤣🤣
I ended up getting rid of my Ruger PC carbine chassis. It was fun, but dang it was way overweight for what it is.
I just don’t understand states like MA. They let criminals walk free, and they put law abiding citizens in jail for exercising their constitutional rights. Crazy.
Yep
Take the plug out the back is a vent for when the gun gets wet or humid it can dry out when holstered.
This is a range toy mostly. That’s not gonna be an issue. Also, the only thing up in that cavity is the takedown pin.
Many FFL'S were selling gen 4-5 glock frames, then all that was needed was to buy a completed slide to finish your build and then file the EFA10 within 7 days of completion. Even GOAL (they have an FFL) was doing this. Admittedly, now with new laws hard to say whats going to happen now.
I do know that, but it’s legally questionable, though legal, so I try not to talk about it too much on public arena- I try to stay above board on everything I do
Nice review, like the channel. 👍
Much appreciated!
+1 Subbed.
I'm in Westernmass. Just a reminder, it's business as usual with remaining inventory of semi auto firearms at FFL's until Oct 24, 2024 when 4885 becomes law.
Pricing is completely stupid from panic buying. May I suggest a trip to the mill in littleton, ma if you have time. IYKYK about the mill.
I love to spread the word of misery when it comes to firearm laws in Mass. Older Fudds are waking up and are not happy with having to get a LTC to possess a Semi Auto Anything. Same response "I ain't doing she-it."
Hopefully the petition to recall 4885 will happen and there will be a another year of business as usual for all the FFL's.
If not most FFL's will close up shop. Until then hoping SCOTUS will hear 1 of 7 lawsuits ending this crap.
Cheers!
@@BigEdsGuns the mill is close to my work, but I’ve never been honestly. I do know about it though. I should stop in.
@crankygunreviews +1 for the mill in Littleton, theyll get you whatever you want, doesnt have to be on the list or pre ban. I suggest dean saftey and kagarms.
@@mk2_suprr interesting. Well, I guess I have a month or so to check it out.
good thing that i’m a revolver guy…
I like those too, but the prices on revolvers will skyrocket if that’s all we can get…
Nice pair of glocks. Are the all the guts the same as gen 3?
@@gingerman6560 no idea
you can build any Glock you want, if you wanted to build a gn5 g20 10mm its totally legall
@@user-mz4hy4wj7z not for long, according to the new bill…
@@crankygunreviews ya you only have till oct
Well aware
ASK YOUR LOCAL CAREER CRIMINAL , I'M CERTAIN THEY WILL HAVE EVERYTHING YOU CANT LEGALLY HAVE IN THE LAND OF THE FREE .
Yep
you can walk into a gun store and walk out with a brand new any model Glock any gen if anyone wants to know hit me up
I know how.
@@crankygunreviews ma fucking sucks, I mean the new bill wont stand for long but for them to even do what they did is absolutely nuts
Yeah I know
You can buy them as parts and register as a complete gun online...
@@terrysummers6382 yes I know.
why do people think you cant own a brand new Glock 20 5th gen in ma? all you need to do is build it buy a kit and register it then totally legal and transferable
@@user-mz4hy4wj7z yeah, for a lot more than an old Glock… you can’t buy a complete one in Ma.
@@crankygunreviews no but you can buy each piece as a kit and assemble it before walking out and then you have a brand new gen 5 legal and around $700
if you are interested in a brand new Glock whatever gen you want 100% legal and transferable let me know,
@@user-mz4hy4wj7z I’m good- the point was new ones cost a lot more- I’m fine with what I have now
@@crankygunreviews ya I gotcha and what you have is very nice I own a couple, all I was trying to do was spread the word if anyone wanted one before oct cause like you said after that good luck