Thank you for all your videos!!! I’ve never considered shoe design till recently!! Ever since I started watching your videos it has helped make the learning process much less intimidating!!
Man, I’m learn so much from your videos. It’s easy to listen to you explain in detail. It’s straight to the point and broken down very nicely. I’m currently trying to better my paint skills and his videos bring me to that next level. So grateful. 🙏
Dude THANK YOU!!This video has taught me more than anyone else’s and I been watching tons of videos and yours is straight to the point but also broken down into the steps.And being able to actually see the difference is amazing.I must find your TH-cam page
Hi ! Is it possible to add duller to the matte finisher to reduce the shine ? Also if this is possible would it be a way to reduce the shine of paint that’s been used straight off the bottle Thanks 🙏🏻
The part where he said one cannot use the Duller as a top coat was extremely helpful to me. I have a new pair of Corral boots which are between satin and shiny and I wanted to dull them. Knowing this would make them chalky saved me the time, money, and failure. Thanks! If anyone can recommend a mattifyer or duller that I can use alone please reply.
I'm working on restoring some Air Up 2014 Orlando's. In 94 that was my first signature shoe so I wanna do em well. I've experimented on beaters, but can I premix Angelus paint with duller in a bottle? I wanna make sure my test subject had the exact ratio I'm putting on the real deal. Or does duller need to be added at the moment of painting?
Angelus Flat Black can actually be a little glossy especially on flat leather and putting Angelus Matte Finisher on top will only make it even more so (matte finisher is as if not more glossy still) You're probably gunna wanna add 5% duller to your last couple layers of flat black or matte finisher to get it looking factory in my opinion.
airbrushed my 1st two layers of paint on shoes - ever - last night (aka this morning). i mis-remembered that y'all say 5-10% duller and only added a drops for fear of the chalk lol anyway i'll get the ratio right today & slap on a few more coats. i also have the matte finisher so i should be able to steer things away from the gloss pretty well #growingpains
What's the difference between Duller and Matte finisher? I'm guessing you have to apply finisher every time u paint a pair of shoes but if it's MATE finisher it gives the same look as using a duller or?
I have a clutch ..from which leather is chipped off from sides..what should i do ..should i remove all the top leather and then paint it..or is there some other way..
You might need a leather repair kit to fill in where the leather has peeled. Once you have a full coverage and have deglazed the remainder of the leather, you can start to apply our paint to the clutch.
Hey, awesome video. I received some stencils from you today and I'm about to begin my first custom on some canvas vans, do I need to use duller if I'm using 2soft? Do I mix them both in the paint? And what ratio should I use?
Duller is optional. Start off with a 50/50 mix of 2-Soft and paint and if you choose to have a flat look then add a drop or two of duller. Thanks for watching and let us know if you have any more questions.
I accidentally added too much duller to my paint mix, is there a way to correct this? I saw in one comment you suggested to start over. Would I need to sand off the chalky paint?
Unfortunately there is no way of fixing it. You will need to start over. Do not worry though, this happens to most artists. It is part of the craft. So do not feel discouraged. 👍
There really is nothing much you can do except for making sure it is kept in room temperature and sealed really well. You can also try shaking it up or maybe adding some 2-thin, but chances are it is too dried up.
No, actually matte is just considered our finisher with the lowest shine. You will still get a tiny sheen. Remember, all our paints contain a little finisher in it already. So ultimately, applying a finisher is optional, but it is suggested to give it that extra seal. You can always mix a little duller into the finishers to wipe out the shine as well. You also want to know that it is all about preparation, right amount of layers and making sure each coat is dry before applying the next. Once the last coat is applied you also want to make sure that it is fully cured. Finishers will only give your custom that additional protection it does not make the paint chip or crack proof. Hope this helped.
Hi! Helpful video, thanks! Now, the only problem is that I've aldready painted my Adidas suede shoes with paint and 2 - soft, 1:1. No duller tho.. And now the suede almost looks like shiny leather. Is it possible to reduce the gloss by adding a coat of Matte Finisher with some drops of duller mixed in? Or should I do another coat of paint with 2 - soft and duller?
Hi you mentioned painting canvas and mesh, and adding duller. I would usually add soft with 50/50 ratio along with the paint mixed in. Would you add your 5-10% duller along with this?? thanks
Привет с России.) отличные краски👍👍👍. У нас крупная мастерская в Москве и мы остановились на красках Angelus. Очень хорошо красят👏🏻. Мы могли бы сотрудничать с Angelus более тесно🤝.
Hey Dillon, if I'm using flat white and use a matte finisher, should I still mix duller to the matte finish to coat the flat white or is the flat white already dulled enough for me to just use matte finish on it without duller mixed in?
Remember, all our paints already have finisher in it already. So ultimately, a finisher is optional. You can always apply some matte finisher after you apply flat white, but the matte finisher will still have some sheen to it. So you can also add some duller into the finisher if you like.
Unfortunately, we would not recommend trying to bring it back. We now have our 4-Coat Matte finisher, so you can actually use this at the end instead of using the Duller. Just another option that some people prefer 😀
Hello Dillion, I have been asked to paint 3 vintage small suitcases. Should I dull it down with some acetone so the paint can stick better or will the duller work better?
Hey I have a question regarding duller and soft when painting canvas like vans, what quantity mix would be advisable for paint, duller and 2 soft to get a nice durable finish with good color saturation?
Yes, you can use our flat white on any scratches. Just make sure you prep the leather first. Angelus Paint is not recommended for use on the very bottoms of shoes as the paint will wear away as soon as you start walking in them. Angelus Paint also works great on certain Soft Midsoles (Jordan 3's, Jordan 4's), and will not hold up on hard midsoles (Converse, Vans, Jordan 1's, Air Force 1's, etc). We want you to have the best experience possible with realistic goals.
You can do two things. Remember, all our paints have finisher in it already. You can use paint/duller mix and do not have to apply a finisher. All our finishers will have a specific sheen to them. However, if you feel like you want to add a finisher. You can always mix some matte finisher/duller and apply a coat. This will not hurt the custom. However, we would just say use the paint/duller method, no finisher added. Totally optional and up to you
No, there is a huge difference between our paints and dyes. We only recommend using the dyes for either leather or suede materials. Remember, Dyes takes the color of what is under them. So if you dye something white with red it will turn pink. It mixes with it. Paint sits on the surface and grabs on. You can cover anything with paint. Our paint is water based while our dyes are alcohol based. Ultimately, if you want to use dye in an airbrush no additive is needed. Please feel free to email us if you have any additional questions or need any tips info@angelusdirect.com Thanks
Thank you very much for your reply ! So, if i want to apply black color on white, paint is enough ? No need to go through a dye ? So that the paint sticks well, can I mix it with 2 Thin in 1/1 anyway ?
I have a question! I want to repaint midsole on Black Cement 3's and also some leather on all white Jordan 1's. I already have a flat white and flat black paints but I just want to be sure, after painting them with a proper amount of coats, is it nessesary to use duller and/or matte finisher if the paints are already flat? I'm wondering which product can help me to get durability and protection of painting so paint will not crack after few days.
Hey there! Make sure to prep first to ensure the paint holds! No duller is needed if the Flat colors are already flat enough for your project, but you can add more if you would like, just make sure not to add too much. No finisher is needed if you are happy with the look of the paint once it has dried. As long as you have prepped correctly the paint will not come off.
I HAVE A QUESTION CAN YOU MIXED COLORS TOGETHER ? FOR EXAMPLE WOULD I BE ABLE TO MIXED PALE BLUE , WITH WHITE TO CREATE A LIGHT SHADE SOMEONE HELP ME 😩‼️
Would u recommend flat white or white for 2020 flint 13s?? I have a tiny spot of leather peeling on the toe from factory flaw ..but i noticed the leather isn't to shiny shiny is kinda dull??
Need some tips for a cosplay suit that was previously black, and I made it orange with angelus paint. Attended an event recently for the first time and I had a lot of rips of the paint, especially between my legs in the crotch area. I was pretty upset bit realized I messed up. Need any tips. Cost is mo factor. I just want to do it the right way this time. I didn't put a finisher cause I didn't have time, but didn't think it would tear after one use. Thanks
Add on to text avove: just need my paint to be super durable through sweat and bumping into crowds of people. The material is a faux leather that I'm wearing.
Hi bro, love your stuff!!!! . Could u give me some pointers on the sanding prep for leather and pig skin trainers, huarache for example? Wat grit etc. Thanks so much. 👍
The amount of Duller should be so minimal that it shouldn't make too much of a difference. Overall it may be easier to add the 50/50 mix of 2-Soft and Paint first followed by a couple of drops of Duller.
Did you say use 50/50 on paint and duller? What about 2 hard? I am about to paint some pleather shoes what do I need to do? I heard use acetone first to get rid of, I forgot the name. But the stuff the factory sprays on it. Do I need to use 2 hard? and if so what's it for?
If you are using duller then it is 3% of the paint you are using. So basically only maybe 3-4 drops. When you are working with pleather. We would suggest using nail polish remover with acetone for preparation. You will not need 2-hard for pleather. Only use 2-hard for plastics and materials that are hard, like windows. Check out more of our videos to learn more.
question: if you need to do more coats of the paint with the duller, will it become chalky? or should you add in the duller on your final coat of that colour ?
Once you mix the duller and paint you can apply as many coats as you need to. Just make sure you apply thin layers and it is dry before applying the next coat.
Angelus Shoe Polish what can I do if I didn’t know about mixing instead of adding it as a coat, I added fuller after I finished and it came out chalky..
You can but we may not suggest it. Unfortunately Duller can dry and clump up fairly easily if the bottle is not tightly fastened and stored. This method may potentially cause the paints to dry up and render useless so it may not be worth it in the long run.
If I used black matte paint should I still be using a matte finisher with duller? I tried on one more part and it made it too chalky and flaky. I used less duller and it still gave it a chalky feel
Generally when you come across chalkiness it would have to do with the ratios of duller to paint. The matte finisher still gives off a little sheen to its finish so you can add duller into the finisher. Just add maybe 2-3 drops of duller and work from there.
@@AngelusBrand I painted over the matte black acrylic paint with the matte finisher and small duller mixed but it still left it chalky/flaky. I just painted over it with matte black paint again to hide the flakiness. But I’m worried if I apply the finisher again it’ll still leave it flaky (I mixed small drops of duller). Is it flaky because it’s matte black paint not the regular glossier black
@@anthonymoran1586 Sounds like it is best to send us a picture of the issue you're having. That way we can have a better look at what we are dealing with. Feel free to send an email to info@angelusdirect.com and one of our customer service reps will be able to assist you.
I have a question. I buy Angelus Neon Orange for my Bakugou cosplay boots but when I apply on the rubber black sole of the boot, the color don't turn right, it doesn't care how many layers I apply, I always can see the black underneath. What can I do? I use acrylic paint because I need the boots for a children's birthday party but wasn't a permanent solution. Help me please. 🙏🙏🙏
Hi Dillon! I used a No. 600 regular finisher on my sneakers. It has made it too glossy. Is there a way to remove the finish and apply a satin or matte finish on it?
All the Acrylic Finishers contain a different shine to them. Matte contains the least amount of shine while the High Gloss contains the most. Order of shine is as follows - Matte, Satin, Regular then High Gloss. You can try adding some duller into the finisher if you like, but more than likely you will need to start and prep all over. Also, we always suggest applying the finisher on a small area before you apply on the whole project.
@@AngelusBrand thank you for your fast reply! It was my first custom/Restoration. The artwork came out great but I made the mistake of normal finisher. I ll try to rectify that in my future customs. Still very new to this and your videos have helped me immensely. I had a feeling I was doing the wrong thing when I applied the finisher. :D
No, unless you add a little duller to the finisher. Please note, all our paints already have some finisher in it. So ultimately adding a finisher is optional, but suggested.
Hello! I heard that duller makes the paint crack faster. If this is the case, can you suggest other option in order to make the paint look factory finish without using it? Also, someone told me that he doesn’t uses at all duller but instead after he finished painting the shoe, he applies a matte finish spray and they look perfect. I am a little confused. Any suggestions? Thanks in advance!
The paint will only crack if you use too much of the duller. You can try our FLAT 4-Coat, that one is completely dull. When you use the amount suggested, you will not have that issue.
Our Flat black comes out a more dull than the standard colors. However, it does have a tiny sheen to it's finish. You can definitely add some duller if you want.
What we recommend is using 2-Soft. Mix a 1:1 ratio of 2-Soft and Paint and add a couple of drops of Duller if you choose. This will allow the paint to adhere to the fabrics and keep the materials nice and soft.
Dillon is the only sneaker artist that taught me customizing in detail.. it's bad to see how underrated he is..😔😔
Its crazy how talented and informative he is. We love what he does for the sneaker community!
To truuuuuu 🥴😩
Can't be too underrated to be on the angelus channel.
Seriously man hes too good
Protect this man at all costs lmfao
Thank you for all your videos!!! I’ve never considered shoe design till recently!! Ever since I started watching your videos it has helped make the learning process much less intimidating!!
You are so welcome!
First time duller buyer right here...brought it the other day. This video comes at just the right time.
Nice!!!
Man, I’m learn so much from your videos. It’s easy to listen to you explain in detail. It’s straight to the point and broken down very nicely. I’m currently trying to better my paint skills and his videos bring me to that next level. So grateful. 🙏
Dillon is an incredible teacher. He is definitely an asset to our team. We appreciate your feedback.
Dillon The Duller King
I’ve painted everything in my house I could get my paws on😂 these products are amazing!
Hahaha that's awesome!
Dude THANK YOU!!This video has taught me more than anyone else’s and I been watching tons of videos and yours is straight to the point but also broken down into the steps.And being able to actually see the difference is amazing.I must find your TH-cam page
Your tips is like a hidden gem. Thank you!
Dillon is my go to for tips
Can u still add a matte finisher on top of the paint w/duller???
Hi ! Is it possible to add duller to the matte finisher to reduce the shine ? Also if this is possible would it be a way to reduce the shine of paint that’s been used straight off the bottle Thanks 🙏🏻
So what's the real difference between this & using a matte sealer?
The part where he said one cannot use the Duller as a top coat was extremely helpful to me. I have a new pair of Corral boots which are between satin and shiny and I wanted to dull them. Knowing this would make them chalky saved me the time, money, and failure. Thanks! If anyone can recommend a mattifyer or duller that I can use alone please reply.
Glad it helped!
Thanks never tried painting on shoes will try it on my nephews shoes. Great explanation on the Duller was wondering how it was applied. Thanks!!!!!
Glad it was helpful!
You are the greatest.
Appreciate the info and tutorials.
Glad you like them!
I'm working on restoring some Air Up 2014 Orlando's. In 94 that was my first signature shoe so I wanna do em well. I've experimented on beaters, but can I premix Angelus paint with duller in a bottle? I wanna make sure my test subject had the exact ratio I'm putting on the real deal. Or does duller need to be added at the moment of painting?
Fire video answered a lot of questions I had
I just made most of those mistakes yesterday thank you so much
Angelus Flat Black can actually be a little glossy especially on flat leather and putting Angelus Matte Finisher on top will only make it even more so (matte finisher is as if not more glossy still)
You're probably gunna wanna add 5% duller to your last couple layers of flat black or matte finisher to get it looking factory in my opinion.
What if I add duller to the glossy finisher and put that on top of flat black 🤔
airbrushed my 1st two layers of paint on shoes - ever - last night (aka this morning). i mis-remembered that y'all say 5-10% duller and only added a drops for fear of the chalk lol
anyway i'll get the ratio right today & slap on a few more coats. i also have the matte finisher so i should be able to steer things away from the gloss pretty well #growingpains
Trial and error is the name of the game. 💯
Wht color blue were U using?
That is our Gift Box Blue.
@@AngelusBrand 👍
Crazy learn something new everyday
Great video and thanks for the info 👍🏼👍🏼
No problem 👍 Thanks for watching!
Thanks heaps brother
What I needed to know! thank you so much!
Glad it was helpful!
The whole video comes in handy
Thanks for watching!
His whole channel comes in handy!
Very informative 💯👌🏾
Really helpful!
I only use duller with my finishers, kinda pointless wasting it in the paint when your finisher just makes everything shiny
Exactly!
Do you use matte finisher?
Sure, unless you're painting fabrics or choose not to use Finisher.
elaborate? you mean you would just go in with the regular paint then at the end add duller to your finisher?
Can you elaborate on this? So its not necessary to use it in the paints?
What's the difference between Duller and Matte finisher? I'm guessing you have to apply finisher every time u paint a pair of shoes but if it's MATE finisher it gives the same look as using a duller or?
I got matte finish but do I need the dullar ? Also do I need to use 2 thin with 2 soft if I run it thru a airbrush for a tee shirt
I've been wondering what's the difference between Black and Flat black, and now I finally know. Thanks for the information!
No problem. Let us know if you have any more questions!
I have a clutch ..from which leather is chipped off from sides..what should i do ..should i remove all the top leather and then paint it..or is there some other way..
You might need a leather repair kit to fill in where the leather has peeled. Once you have a full coverage and have deglazed the remainder of the leather, you can start to apply our paint to the clutch.
@@AngelusBrand thank you for ur time
Do you use the duller with 2-soft when painting fabric ?
What’s the best way to get the correct ratios?
Hey, awesome video. I received some stencils from you today and I'm about to begin my first custom on some canvas vans, do I need to use duller if I'm using 2soft? Do I mix them both in the paint? And what ratio should I use?
Duller is optional. Start off with a 50/50 mix of 2-Soft and paint and if you choose to have a flat look then add a drop or two of duller. Thanks for watching and let us know if you have any more questions.
I accidentally added too much duller to my paint mix, is there a way to correct this? I saw in one comment you suggested to start over. Would I need to sand off the chalky paint?
Unfortunately there is no way of fixing it. You will need to start over. Do not worry though, this happens to most artists. It is part of the craft. So do not feel discouraged. 👍
Hello, can you add duller and 2 soft to a paint color? Gonna start my first pair of shoes and I’m so nervous🙃
Can I add duller to a satin finish to have a final to finish without the shine of satin
Need urgent help... I haven’t added finisher yet but have forgot to add duller... can I add another coat of paint with duller in
My duller dried up in the bottle, is there a way I can still use it by mixing water or another liquid to it?
There really is nothing much you can do except for making sure it is kept in room temperature and sealed really well. You can also try shaking it up or maybe adding some 2-thin, but chances are it is too dried up.
Quick question people do I use finisher on a white Air Force 1? To get factory results?
By adding a matte finisher to a normal coat of Angelus paint (without duller) would the effect be the same as using a duller?
No, actually matte is just considered our finisher with the lowest shine. You will still get a tiny sheen. Remember, all our paints contain a little finisher in it already. So ultimately, applying a finisher is optional, but it is suggested to give it that extra seal. You can always mix a little duller into the finishers to wipe out the shine as well. You also want to know that it is all about preparation, right amount of layers and making sure each coat is dry before applying the next. Once the last coat is applied you also want to make sure that it is fully cured. Finishers will only give your custom that additional protection it does not make the paint chip or crack proof. Hope this helped.
Hi! Helpful video, thanks! Now, the only problem is that I've aldready painted my Adidas suede shoes with paint and 2 - soft, 1:1. No duller tho.. And now the suede almost looks like shiny leather. Is it possible to reduce the gloss by adding a coat of Matte Finisher with some drops of duller mixed in? Or should I do another coat of paint with 2 - soft and duller?
The paint and the duller would take that shiny look away. No need to add the 2-Soft. The paint will not be soft on suede.
can i add little water in paint instead of dillon
Hi you mentioned painting canvas and mesh, and adding duller. I would usually add soft with 50/50 ratio along with the paint mixed in. Would you add your 5-10% duller along with this?? thanks
Hey there! You can add the 5%-10% duller in after you have added in the 2-soft, make sure to mix well and you are good to go
Angelus duller vs matte finisher... Is it just one being a mixture vs the other being a top coat with same or similar results? Sorry, newbie here.
When you mix your paint with duller and wait for it to dry, is it ok to then add your matte finisher?
Sorry for the delayed response. Please email us at info@angelusdirect.com if you are still looking for information. Thank you!
Привет с России.) отличные краски👍👍👍. У нас крупная мастерская в Москве и мы остановились на красках Angelus. Очень хорошо красят👏🏻. Мы могли бы сотрудничать с Angelus более тесно🤝.
Hey Dillon, if I'm using flat white and use a matte finisher, should I still mix duller to the matte finish to coat the flat white or is the flat white already dulled enough for me to just use matte finish on it without duller mixed in?
Remember, all our paints already have finisher in it already. So ultimately, a finisher is optional. You can always apply some matte finisher after you apply flat white, but the matte finisher will still have some sheen to it. So you can also add some duller into the finisher if you like.
Should I use flat white or white with duller added on jordans 5s and 6s.
Usually flat white is perfect for most Jordan white colors.
what is that song called that was used in the outro does anyone know ?
Most of our music from Epidemic Sound 👍
@@AngelusBrand Thank you, is that all non copyrighted music for youtube
@@assann4989 Yes it is
Hi. I get the duller part but wat do u do wen you add 2 soft or 2 hard as well?? Would that go in with the duller and paint too?? Please help. Thanks
Hey Danny, email us at info@angelusdirect.com we can help you there.
Hey Dillon! Hope you can answer my questions. Do I need to apply anything before using flat black on sail leather? Or after?
Dillon will not get these questions unfortunately. Try sending him a DM!
I have an older bottle of duller that's stiffened over time and starting to dry out. Can it be revitalized by adding a little water?
Unfortunately, we would not recommend trying to bring it back. We now have our 4-Coat Matte finisher, so you can actually use this at the end instead of using the Duller. Just another option that some people prefer 😀
Hello Dillion, I have been asked to paint 3 vintage small suitcases. Should I dull it down with some acetone so the paint can stick better or will the duller work better?
Sorry for the delayed response. Please email us at info@angelusdirect.com if you are still looking for information. Thank you!
my duller has dry like rock, how can i get it arrange?
Hey I have a question regarding duller and soft when painting canvas like vans, what quantity mix would be advisable for paint, duller and 2 soft to get a nice durable finish with good color saturation?
Sorry for the delayed response. Please email us at info@angelusdirect.com if you are still looking for information. Thank you!
Hi, I want to fix scratches on mu AF1 should I use white or flat white? Also is it good idea to paint midsole with white to restore new look?
Yes, you can use our flat white on any scratches. Just make sure you prep the leather first. Angelus Paint is not recommended for use on the very bottoms of shoes as the paint will wear away as soon as you start walking in them. Angelus Paint also works great on certain Soft Midsoles (Jordan 3's, Jordan 4's), and will not hold up on hard midsoles (Converse, Vans, Jordan 1's, Air Force 1's, etc). We want you to have the best experience possible with realistic goals.
If I use the duller I need to use a finisher (matte or anyone)?
You can do two things. Remember, all our paints have finisher in it already. You can use paint/duller mix and do not have to apply a finisher. All our finishers will have a specific sheen to them. However, if you feel like you want to add a finisher. You can always mix some matte finisher/duller and apply a coat. This will not hurt the custom. However, we would just say use the paint/duller method, no finisher added. Totally optional and up to you
Very interesting ! Can we use the dye only ? Dye + 2 Thin in 50/50 for leather and Dye + 2 Soft for Textile / Fabrics in 50/50 also ? Thanks !
No, there is a huge difference between our paints and dyes. We only recommend using the dyes for either leather or suede materials. Remember, Dyes takes the color of what is under them. So if you dye something white with red it will turn pink. It mixes with it. Paint sits on the surface and grabs on. You can cover anything with paint. Our paint is water based while our dyes are alcohol based. Ultimately, if you want to use dye in an airbrush no additive is needed. Please feel free to email us if you have any additional questions or need any tips info@angelusdirect.com Thanks
Thank you very much for your reply ! So, if i want to apply black color on white, paint is enough ? No need to go through a dye ? So that the paint sticks well, can I mix it with 2 Thin in 1/1 anyway ?
I have a question! I want to repaint midsole on Black Cement 3's and also some leather on all white Jordan 1's. I already have a flat white and flat black paints but I just want to be sure, after painting them with a proper amount of coats, is it nessesary to use duller and/or matte finisher if the paints are already flat? I'm wondering which product can help me to get durability and protection of painting so paint will not crack after few days.
Hey there! Make sure to prep first to ensure the paint holds! No duller is needed if the Flat colors are already flat enough for your project, but you can add more if you would like, just make sure not to add too much. No finisher is needed if you are happy with the look of the paint once it has dried. As long as you have prepped correctly the paint will not come off.
@@AngelusBrand thank you for reply! I hope it will work for me. Take care guys
I have been adding duller to the matte finisher not the paint .
You can actually do either or! Remember, all our paints have some finisher in it. So ultimately, adding a finisher is optional but encouraged.
I HAVE A QUESTION CAN YOU MIXED COLORS TOGETHER ? FOR EXAMPLE WOULD I BE ABLE TO MIXED PALE BLUE , WITH WHITE TO CREATE A LIGHT SHADE SOMEONE HELP ME 😩‼️
Yes! You are more than welcome to mix multiple paints together to achieve a specific color you have in mind!
Are u able to use these paints to paint over the red on uptempo ? Lol wanna paint the red on the air uptempo to white
Hit us up on chat at info@angelusdirect.com with some photos and your ideas! We can assist you there.
hi, I'm about to repaint a midsole using an airbrush. Should I still add 2-thin to my Paint+2-hard mixture? :)
Start out with the just the paint and 2-Hard mix and if the paint is having a hard time passing then add a little 2-Thin.
Would u recommend flat white or white for 2020 flint 13s?? I have a tiny spot of leather peeling on the toe from factory flaw ..but i noticed the leather isn't to shiny shiny is kinda dull??
May want to try Flat White then.
will flat white paint be effected if you add duller AND 2thin at the same time?
Flat white already has Duller mixed in so we wouldn't recommend adding more! But you can mix with Flat White with Duller
Need some tips for a cosplay suit that was previously black, and I made it orange with angelus paint. Attended an event recently for the first time and I had a lot of rips of the paint, especially between my legs in the crotch area. I was pretty upset bit realized I messed up. Need any tips. Cost is mo factor. I just want to do it the right way this time. I didn't put a finisher cause I didn't have time, but didn't think it would tear after one use. Thanks
Add on to text avove: just need my paint to be super durable through sweat and bumping into crowds of people. The material is a faux leather that I'm wearing.
thank *YOU*
Welcome!
Hi bro, love your stuff!!!! . Could u give me some pointers on the sanding prep for leather and pig skin trainers, huarache for example? Wat grit etc. Thanks so much. 👍
Definitely recommend starting with an 800 grit, and move your way up as needed. Remember, the higher the grit, the softer the paper.
Hi I would like to know for paint midsoles I should mix the 2thin with duller and paint?
If you are airbrushing the midsoles, yes. Be careful with how much of the duller that you add, you only need very little.
@@AngelusBrand Ok thank you for your answer, I am not airbrushing I am going to paint it with the tradicional brush
Hi Dillon, On soft material do you add Duller ratio before or after adding 2-Soft?
The amount of Duller should be so minimal that it shouldn't make too much of a difference. Overall it may be easier to add the 50/50 mix of 2-Soft and Paint first followed by a couple of drops of Duller.
Did you say use 50/50 on paint and duller? What about 2 hard? I am about to paint some pleather shoes what do I need to do? I heard use acetone first to get rid of, I forgot the name. But the stuff the factory sprays on it. Do I need to use 2 hard? and if so what's it for?
If you are using duller then it is 3% of the paint you are using. So basically only maybe 3-4 drops. When you are working with pleather. We would suggest using nail polish remover with acetone for preparation. You will not need 2-hard for pleather. Only use 2-hard for plastics and materials that are hard, like windows. Check out more of our videos to learn more.
Recommendations on ratio with the marker?
Usually 50/50, really depends on the color you are using. Some are thicker than others.
question: if you need to do more coats of the paint with the duller, will it become chalky? or should you add in the duller on your final coat of that colour ?
Once you mix the duller and paint you can apply as many coats as you need to. Just make sure you apply thin layers and it is dry before applying the next coat.
Angelus Shoe Polish what can I do if I didn’t know about mixing instead of adding it as a coat, I added fuller after I finished and it came out chalky..
When painting on canvas material can you use duller and 2 soft at the same time?
Yes, but first mix the paint/2-soft then add the few drops of duller
🔥🔥🙌
The product reduces shine and color level. Can I apply a high gloss coat to increase the shine?
Can you flat all of your paints, by pre-mixing duller into the bottle?
You can but we may not suggest it. Unfortunately Duller can dry and clump up fairly easily if the bottle is not tightly fastened and stored. This method may potentially cause the paints to dry up and render useless so it may not be worth it in the long run.
@@AngelusBrand ok..love you guys, please try to get more matte in stock.
hello whats the difference between your red and blue bottle matte acrylic finishers？
Same product just different packaging. The Blue bottle is newer while the narrow red bottle is the older bottle.
If I used black matte paint should I still be using a matte finisher with duller? I tried on one more part and it made it too chalky and flaky. I used less duller and it still gave it a chalky feel
Generally when you come across chalkiness it would have to do with the ratios of duller to paint. The matte finisher still gives off a little sheen to its finish so you can add duller into the finisher. Just add maybe 2-3 drops of duller and work from there.
@@AngelusBrand I painted over the matte black acrylic paint with the matte finisher and small duller mixed but it still left it chalky/flaky. I just painted over it with matte black paint again to hide the flakiness. But I’m worried if I apply the finisher again it’ll still leave it flaky (I mixed small drops of duller). Is it flaky because it’s matte black paint not the regular glossier black
@@anthonymoran1586 Sounds like it is best to send us a picture of the issue you're having. That way we can have a better look at what we are dealing with. Feel free to send an email to info@angelusdirect.com and one of our customer service reps will be able to assist you.
I have a question I wanna paint the shoe tongue black. Can I just mix softner with black or do I need something else?
Exactly, use the 2-soft fabric medium/paint mix to paint the tongue if it is fabric 👍
@@AngelusBrand a lot of TH-camrs use gac 900 for the tongue is that the same as 2-soft?
I have a question. I buy Angelus Neon Orange for my Bakugou cosplay boots but when I apply on the rubber black sole of the boot, the color don't turn right, it doesn't care how many layers I apply, I always can see the black underneath. What can I do? I use acrylic paint because I need the boots for a children's birthday party but wasn't a permanent solution. Help me please. 🙏🙏🙏
Hi Dillon! I used a No. 600 regular finisher on my sneakers. It has made it too glossy. Is there a way to remove the finish and apply a satin or matte finish on it?
All the Acrylic Finishers contain a different shine to them. Matte contains the least amount of shine while the High Gloss contains the most. Order of shine is as follows - Matte, Satin, Regular then High Gloss. You can try adding some duller into the finisher if you like, but more than likely you will need to start and prep all over. Also, we always suggest applying the finisher on a small area before you apply on the whole project.
@@AngelusBrand thank you for your fast reply! It was my first custom/Restoration. The artwork came out great but I made the mistake of normal finisher. I ll try to rectify that in my future customs. Still very new to this and your videos have helped me immensely. I had a feeling I was doing the wrong thing when I applied the finisher. :D
Would you still use a matte finisher even if you already mixed in the duller with your paint?
No, unless you add a little duller to the finisher. Please note, all our paints already have some finisher in it. So ultimately adding a finisher is optional, but suggested.
@@AngelusBrand Ok cool, thank you!
Hello! I heard that duller makes the paint crack faster. If this is the case, can you suggest other option in order to make the paint look factory finish without using it? Also, someone told me that he doesn’t uses at all duller but instead after he finished painting the shoe, he applies a matte finish spray and they look perfect. I am a little confused. Any suggestions?
Thanks in advance!
The paint will only crack if you use too much of the duller. You can try our FLAT 4-Coat, that one is completely dull. When you use the amount suggested, you will not have that issue.
@@AngelusBrand When will this be available in EU? My local supplier says that the coats did not arrived in EU so far. Thanks!
Do you use duller on all parts of the af1 or just the toe box
Duller is always optional. If you are looking for the matte color and want no shine on your customs then add some duller.
What’s a good tip for clearing paint out of the vent holes 🕳 in the toe box?
Try a something like a toothpick.
Does your gold paint work for the 2020 Jordan 1 gold Metallics?
Our gold was not made to match those exactly, but it would be really close in color.
can this paint be used on fabric? i.e the threaded nike swoosh on janoski shoes
It can. You will need to use the additive 2-Soft. Mix that 50/50 and you are good to go. Once dry, please heat set.
So i don't need to add any more duller to flat black?
Our Flat black comes out a more dull than the standard colors. However, it does have a tiny sheen to it's finish. You can definitely add some duller if you want.
Bro will Angelus work on ice hockey goalie pads!!? Please respond ASAP ❤❤ I am about to throw down
Can I add duller directly in my angelus paint bottles?
You can. Or you can separate the paint with the duller in another jar.
Hi good vid
If I want to turn a full bottle of Black to Flat Black how much duller should I add? How should I eyeball 10%?
5-8 % of whatever amount you are planning to add. So it would be about 5.9 ml if you added it to the 4 oz bottle.
Question: would it make more sense to use duller or thinner when painting on canvas, mesh, etc?
What we recommend is using 2-Soft. Mix a 1:1 ratio of 2-Soft and Paint and add a couple of drops of Duller if you choose. This will allow the paint to adhere to the fabrics and keep the materials nice and soft.
I have use the duller in every coat of colour?
Yes... just pour out your colour in a pot and add 5% duller
Can i mix the duller directly into a 1oz bottle of paint?? will the paint gets dry quickly inside when not in use?
Sure you can, as long as the ratios are done properly. Just make sure the bottle is in room temperature and properly stored.
Copy that thank you so much❤️
thank uuu :D