1957 Chevy Bel Air Chemical Paint and Rust Removal

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 200

  • @Thewatcherinthering336
    @Thewatcherinthering336 11 หลายเดือนก่อน +5

    Amazing to watch all the years of its various lives being washed away and uncovered. Wonder how many times this car was someone’s pride and joy. The feeling of , “I picked up this 57 it’s getting painted, can’t wait till it’s done”, seems to have been said several times throughout its life….

  • @draggonsgate
    @draggonsgate ปีที่แล้ว +44

    At first, I was really impressed with this Chevy. Then once it got the first dip, I was like, yup... just like I remembered. My Mom's first car I remember was a '57 Bel Air 4 door sedan. I wasn't allowed in the backseat because there was no floor. I also wasn't allowed to stand on the passenger front floor, because there wasn't one, just a cafeteria tray. She could pull the whole side of the car out by not opening the door, but just pulling on the door handle because the center pillar rusted away from the bottom of the car. The trunk was a big gaping hole. My Grampa had to use her car one day because his had to go in the shop. That night, he gave my Mom his Impala ('63) to drive for a few days and forbid her to ever use hers again. He bought her a '61 Fury that weekend. That car I loved! Advice from an Olde Pharte... don't kill yourself overworking. It's not worth it in the long run. You beat the hell out of your body and miss a lot of important stuff. Enjoy your family and friends!

    • @EV-wp1fj
      @EV-wp1fj ปีที่แล้ว +1

      I'm honestly amazed that a six year old car could rust as horribly as you described, but old cars were like that. I'm younger than you, but old enough to remember all the rust bomb cars from the 60's and 70's that made it to the 1980s barely in one piece. As I understand it, Dodge/Plymouth/Chrysler's were the worst in this department, GM somewhat better. I don't think bodies improved until after the 1980s. My BMW today is 12 years old, parked outdoors in a marine climate and there's no rust anywhere. I can't even figure out how BMW pulled that off.

    • @draggonsgate
      @draggonsgate ปีที่แล้ว +1

      @@EV-wp1fj This was in like '67... I was 4, so was my grampa's Impala... lol...

    • @yanikstaley7405
      @yanikstaley7405 ปีที่แล้ว +2

      Do your customers ever send pictures of the finished cars that would be nice to see to.

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว +4

      Oh wow! I knew they were notorious rust buckets but that’s next level lol. A fury is definitely a solid upgrade though! Hopefully TH-cam really takes off and I won’t need a second job lol. But I do miss a lot of stuff which is upsetting. Thank you for this comment I really enjoyed reading it.

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว +3

      @@yanikstaley7405I do have one posted on my community feed. 99% of the cars I have videos on aren’t finished yet but people did say they will send me some pics

  • @Blimpie1000
    @Blimpie1000 7 หลายเดือนก่อน +5

    This is so therapeutic watching this. I never paid that much attention to 'Fifties cares in the 'Sixties, but I do recall how quickly the '57-'58 Ford and Plymouths rusted away. For some reason the '55 Plymouths were long lasting, even into the '70s; many '52 and '55 Plymouths were used as taxicabs. The '55-'57 Chevs lasted way longer than the others and then achieved immortality!

  • @rumrunner1756
    @rumrunner1756 ปีที่แล้ว +9

    I’m glad that you filmed this one. I love shoebox Chevys. I’m also intrigued by the repairs done over the years and how they held up. This one was a bit overloaded with the Bondo makeup. Hopefully it is off to a new and better life. 👍 to you.

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      I’m glad you enjoyed it! I appreciate you watching. Thank you

  • @gladememmott3001
    @gladememmott3001 ปีที่แล้ว +7

    This is the car version of nate the hoof trimmer channel lol.... ❤❤❤ Its awesome 😎

    • @Hitmanzero47
      @Hitmanzero47 3 หลายเดือนก่อน +1

      Gramme is better over at the Hoof GP

    • @gladememmott3001
      @gladememmott3001 3 หลายเดือนก่อน +1

      @@Hitmanzero47 LoL 😂😂😂😂

  • @georgemyers6518
    @georgemyers6518 ปีที่แล้ว +6

    You do a very thorough job.
    Dipping is way better than media blasting for sure

  • @kaidzaack2520
    @kaidzaack2520 ปีที่แล้ว +3

    This is rather “auto lysis” than “automobile”. A fun project! 🤗💯👍

  • @loveoldcarsguy
    @loveoldcarsguy ปีที่แล้ว +2

    Don’t know what that all costs BUT deffinately worth every penny! Now the owner knows what he has and has saved another classic because he probably won’t abandon the project because he spent all his time and money scraping and sanding and wire brushing the old red heap!!

  • @johnpappas2060
    @johnpappas2060 ปีที่แล้ว +1

    ENJOYABLE video. Hope to see more. Thanks 🙏

  • @robj2704
    @robj2704 ปีที่แล้ว +6

    That's a rough one but it is 66 years old. When I was a teenager in the early sixties, this car would represent a 1900-1910 vehicle.

  • @iandibley8032
    @iandibley8032 ปีที่แล้ว +1

    It was a fantastic time-saving process ,I have done this job manually it takes weeks 👏

  • @brendagaunce8757
    @brendagaunce8757 ปีที่แล้ว +1

    Dipping is the best way to get a clean slate to fix and repair everything that could be hidden. But you need to dip into a sealer tank to get coverage on back side of closed areas that a spray gun will not touch. Great video and enjoyed very much.

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว +1

      Thank you! Most of our customers get the cars primer dipped or Ecoated afterwards. They submerge and rotate the whole car.

  • @nozzledrich
    @nozzledrich 11 หลายเดือนก่อน

    I dont know why but your car PWing vids are almost hypnotic.

  • @flatdaddio
    @flatdaddio ปีที่แล้ว +4

    Working two jobs.. The struggle is real. Great video!!

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว +1

      It definitely is lol. Thank you! I appreciate you watching it

  • @truthteller8459
    @truthteller8459 ปีที่แล้ว +2

    I was born in 1961 and the very first car I remember in my family was a 1957 Chevrolet in turquois and a white top with 4 doors.

  • @wendypilley1505
    @wendypilley1505 ปีที่แล้ว +3

    That would make an awesome redto. My all time favourite car.
    "Spotto a 57 chev, a blown 57 two door"

  • @KurtClark
    @KurtClark ปีที่แล้ว +2

    Almost seventy years of history in that car body! Somebody will have a really nice car when they done.

  • @victorrobinson7008
    @victorrobinson7008 7 หลายเดือนก่อน +1

    Should add a primer bath dip tank too prevent rust all over and can charge more ! I'd have no problem paying more for that !
    From California Smoke.

  • @walterholmes4609
    @walterholmes4609 ปีที่แล้ว +2

    This is my favorite car of all time, but man, what rust buckets rhey are@

  • @johnkelly6942
    @johnkelly6942 ปีที่แล้ว +7

    I hope the owner has at least $100k available to see this one through. Nice video!

    • @CAROLDDISCOVER-2025
      @CAROLDDISCOVER-2025 ปีที่แล้ว

      Import a few ways it doesn't take 150 to get it from worse at work needs to be. If nothing else ship it down to Puerto Rico. Of course it helps to know somebody. So you say why is this guy talking about Puerto Rico? Exactly! Back to the 1980s and 1990s having your interior done in Tijuana, same principle. I've got guy pays me well for every 57 two-door I can get him. Yard see how nice it looked when he ships them back here to sell. He ships them worldwide. And I speak with him through an interpreter! You just a thought 🤔 and I figure you might find it interesting given your comment.

    • @77aleks77100
      @77aleks77100 7 หลายเดือนก่อน

      It depends until what “end”. It could be a hotrod or a gasser

  • @gregwelch2459
    @gregwelch2459 ปีที่แล้ว +3

    Awesome 😎

  • @e.fifield9034
    @e.fifield9034 ปีที่แล้ว

    great job!! I bet that if the dip tank was Airated it would do an even better job the first time around . neat watching the cars come out rust free!!

  • @richardphelan8414
    @richardphelan8414 ปีที่แล้ว

    A very interesting process Had a 69 Nova Acid dipped in the early 70s for drag racing ,I like your channel so please stay with it

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      Thanks! I’m glad you enjoy it! I will definitely keep the videos coming

  • @richardjimenez7394
    @richardjimenez7394 หลายเดือนก่อน

    Thanks for sharing your work.

  • @robertthomas7176
    @robertthomas7176 ปีที่แล้ว +1

    It is great to see the story hidden under the paint.

  • @richardjimenez7394
    @richardjimenez7394 ปีที่แล้ว

    Great job on the 57 Chevy

  • @jeffd3660
    @jeffd3660 ปีที่แล้ว +2

    Awesome .... thanks for posting 👍👍

  • @francoisbouchard602
    @francoisbouchard602 ปีที่แล้ว +1

    Good.job cool car GM 😄👍👍👏👏👏

  • @leslienordman8718
    @leslienordman8718 ปีที่แล้ว +1

    Man, that Chevy got bashed around. Thanks for removing the detritus. :-)

  • @adambergendorff2702
    @adambergendorff2702 ปีที่แล้ว

    How many customers are depressed after they thought they brought you are really solid car only to find out there is rust almost everywhere, Great video of how much work even this process is, but the results are outstanding!

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว +1

      A lot lol. We had a guy just pick up a camaro and didn’t realize how much rot and filler was underneath.

  • @thulasidass8485
    @thulasidass8485 9 หลายเดือนก่อน +1

    What is dipping asid a like is.

  • @gabechiplin8140
    @gabechiplin8140 ปีที่แล้ว +1

    Another great instalment! It's family viewing here as my wife and I both enjoy your tubes immensely 👍.
    I think I've asked before but what temp is the alkaline?

  • @tonybino01
    @tonybino01 ปีที่แล้ว +1

    It's been awhile since I've seen a video of yours. Love it! Thank you!

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว +1

      I took a little social media break. I’m back now though! I really appreciate that! Thank you!

    • @billpar
      @billpar ปีที่แล้ว +1

      @@minute_of_dangle love these videos thanks

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      @@billparthank you you for watching and the positive feedback!

  • @JT-LV
    @JT-LV ปีที่แล้ว

    Awesome vid man. Keep ‘em coming. .

  • @michaelnaisbitt7926
    @michaelnaisbitt7926 ปีที่แล้ว

    Great job on her I can see her back on the road soon good channel keep it up 🇦🇺🇦🇺

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      Thank you! I hope the owner gives me some pics when he’s done so I can share them with you!

  • @motorTranz
    @motorTranz ปีที่แล้ว

    God job! Thank you for sharing!

  • @hguldmann
    @hguldmann ปีที่แล้ว +1

    Good thing you can get many metal parts for that model Bel Air
    and hope there is someone who has the sense to put it in order who is working on it

  • @kdsboosted4954
    @kdsboosted4954 ปีที่แล้ว

    Very cool 🤙 i wish I had a tank. I kind of do the same process with stripper and the pressure washer right down to bare metal

  • @kevinmcpherson6999
    @kevinmcpherson6999 ปีที่แล้ว

    Nice job. Someone has a lot of work ahead of them. Best of luck to the owner. Show us as u repair and paint. Also finished car. Total cost would be nice.

  • @deagt3388
    @deagt3388 ปีที่แล้ว +3

    The sound produced by the pressure washer is reminiscent of a bumblebee flying around the car... ;-)

  • @Gargoyle2556
    @Gargoyle2556 ปีที่แล้ว +1

    It would be nice to see one of your cars after they've finished restoring them.

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      I’ll be getting some pics. 99% of the cars I’ve done videos on aren’t finished yet though. I did post a Porsche 911 I did in my community feed

  • @tonychamberlain8057
    @tonychamberlain8057 ปีที่แล้ว

    That is amazing what it does to the rust !

  • @chrisplace3024
    @chrisplace3024 ปีที่แล้ว +1

    Nice Job AS ALWAYS

  • @keghamstepanian
    @keghamstepanian ปีที่แล้ว

    Impressive process. ❤

  • @Camska427
    @Camska427 4 หลายเดือนก่อน

    these tri fives have had so many owners over the years that have done so many things to them over time. almost never find them untouched like my 4 door 57.

  • @adubbelde1
    @adubbelde1 ปีที่แล้ว

    A little over 30 years ago I had the frame and suspension of my 37 Chev PU dipped. It came out great. But things happened and the project go set aside until recently. I never had the cab or the rest of the body dipped. Would love to do it, but there aren;t any metal strippers close to western South Dakota that I'm aware of. The cab is virtually rust free, there were two small spots where the back cab wall met the floor that were bubbled up and I've had those patched. Any other rust is light surface rust.

  • @victorrobinson7008
    @victorrobinson7008 7 หลายเดือนก่อน +1

    A wide putty blade should be used too break loose all remaining Bondi before dipping the last time too help with the final dip ?
    From California Smoke.

  • @azarellediaz4892
    @azarellediaz4892 ปีที่แล้ว

    Great job, even with all the patches I think it’s not bad counting that it’s older than me.
    All joking aside, those acid tanks are huge, what is their capacity and how do you dispose of the old chemicals?

  • @dwesson9252
    @dwesson9252 3 หลายเดือนก่อน

    How do you NOT get an air pocket inside the roof preventing the liquid from fully contacting the steel?

  • @normangarrand1106
    @normangarrand1106 ปีที่แล้ว

    what do you do with all the paint and residue that is power washed off the items

  • @itwasasimpleproject
    @itwasasimpleproject ปีที่แล้ว

    As a fellow owner of a basket case shoebox Chevy -
    Hacked up transmission tunnel - Check
    (I suspect a 4 speed graced it sometime in the 60s/70s - they used a screwdriver and a hammer to cut the hole, and no evidence that their tool kit had ever seen a hacksaw)
    Gnarly rust ridden floor pan and wheel wells - Check
    (took 6 months on a rotisserie for me to replace several rotted out braces, inner rockers, driver footwells, rear wheel well skins, and the transmission pan)
    Unbelievable amounts of filler in the Quarter panels - Check
    (Mine was rotted out in both fender lips on forward, the passenger side was so bad they had bailing wired a piece of rebar in the gap and sculpted filler to match the panel lines)
    Odd placement of said filler - Check
    (when they "installed" the 4 speed they took utmost care to "drill" a hole in the dash for a Tach and then the next owner filled said hole with filler along "shaving" the trim holes in the front fenders where the stainless trim was suppose to mount.)
    I wonder if you ever dip the doors and/or front fenders for these vehicles? I know from experience that they can tell quite a bit about the trauma these survivor cars have gone through over the last 50+ years.

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      I do a lot of the small parts too. I usually post them on my shorts

  • @Alexander.dagreat
    @Alexander.dagreat ปีที่แล้ว

    Great work, does the chemical bath affect the way Bondo will go on the car body or affect the paint in anyway. Being that there is chemicals embedded on the metal?

  • @juanmcsweeney4503
    @juanmcsweeney4503 ปีที่แล้ว

    With all the work in dipping and the extraordinary amount of work to come replacing the rear quarters and floor, much better idea to get another body

  • @dekebell3307
    @dekebell3307 ปีที่แล้ว

    Very, very cool!

  • @bryancooper2699
    @bryancooper2699 ปีที่แล้ว

    Awesome video. Who is gonna do the repair? I would like to see how the plan on tackling that big dent. Glad dipping is becoming a more popular thing when restoring vehicles

    • @akjeff64
      @akjeff64 ปีที่แล้ว

      I have a 57 Chevy, and those fin pieces are reproduced, as well as the whole quarter panel with the fins.. Just depends how far they want to take the repair.

  • @durangodave
    @durangodave ปีที่แล้ว

    i am curious, if two body techs worked on this full time, how long before its ready for paint inside and out, 2 weeks?

  • @kevinbryant5756
    @kevinbryant5756 ปีที่แล้ว

    I wonder if the red paint used was the old "Imron" that was popular for a while. I've never messed with it before but I've heard it's near bulletproof.

  • @richardjimenez7394
    @richardjimenez7394 หลายเดือนก่อน

    Awesome clean up and stripping the floors and body.

  • @Imnotyourdoormat
    @Imnotyourdoormat ปีที่แล้ว +2

    All illusions stop and nothing is hidden here with the....."Confessor."

  • @edwinheredia4305
    @edwinheredia4305 ปีที่แล้ว

    Beautiful job.

  • @greenwolf401
    @greenwolf401 ปีที่แล้ว +1

    I miss that figurine going along for the ride. 😊

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      I’ll put them back on. I have no idea why I didn’t in this one. I must have been in a hurry or something

  • @nomad57-u3x
    @nomad57-u3x 6 หลายเดือนก่อน

    the chemical strip place here locally is called -the sunset strip- at least ten twenty years ago thats what it was called...i had my 57 nomad body dipped there then put epoxy black primer back on it to protect it until i could actually have time to work on it...

  • @amomentsnotice
    @amomentsnotice ปีที่แล้ว

    Thank you for the share

  • @randallyarborough7923
    @randallyarborough7923 11 หลายเดือนก่อน

    I like this process so much better than media blasting. I wish I could see what happens to it after it leaves your shop

  • @bruceyoung1343
    @bruceyoung1343 ปีที่แล้ว

    The ‘ol girl put up a fight so it seems. What you do for customers makes it easy to see what needs to be replaced. Without paint and the cursed bindo gone, the imperfections are laid bare.

  • @WilliamBegenau
    @WilliamBegenau 6 หลายเดือนก่อน

    what do you do with the water run off?

  • @JohnnyAFG81
    @JohnnyAFG81 ปีที่แล้ว

    How long does the acide bath last before you have to drain it?

  • @juniorsaunders2694
    @juniorsaunders2694 ปีที่แล้ว +1

    Well he's got a good dash and firewall

  • @Ds755rxz
    @Ds755rxz ปีที่แล้ว

    What do you use to avoid flash rusting?

    • @kdsboosted4954
      @kdsboosted4954 ปีที่แล้ว

      When the metal is not sanded the rusting process is slow moving.

  • @smoke1815
    @smoke1815 ปีที่แล้ว

    you do good work friend.

  • @chrischurch5357
    @chrischurch5357 ปีที่แล้ว

    Hi there don't understand why I find watching the paint stripping process interesting but I do . A big ask but is there any chance occasionally you could include a photo or two of when the car is completely restored Chris C

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      I’m glad you enjoy it. I would love to do that but sometimes it takes years for people to finish these cars. I’m in contact with some of the people who are restoring them and they said they’ll send me pics when they are done. Thank you for watching and the feedback

  • @bigdaddyfarms72organic61
    @bigdaddyfarms72organic61 ปีที่แล้ว

    Love the video

  • @aleksandrfirsanov924
    @aleksandrfirsanov924 ปีที่แล้ว

    Отличная работа!

  • @edwardpitingolo3206
    @edwardpitingolo3206 ปีที่แล้ว

    I enjoy your videos and you do a great job. What is the psi of your pressure washer?

  • @chrishall8142
    @chrishall8142 ปีที่แล้ว

    What’s happens to leaded areas ?

  • @MarcMorris-wp7ie
    @MarcMorris-wp7ie ปีที่แล้ว

    Whats the chemical?....ive cleaned stuff with acid sometimes,but starts rusting fast after...

  • @andretorben9995
    @andretorben9995 ปีที่แล้ว

    When you show the body getting lifted out of the tank a caption telling us what number of dip it is and how long it was in the tank, for examaple "Dip 2 complete, 3 days in tank". That would be great just to know how long these things take.

  • @CAROLDDISCOVER-2025
    @CAROLDDISCOVER-2025 ปีที่แล้ว

    I remember watching some of your earlier stuff. To me it looks like you've come a long ways. Congratulations on the numbers that you gotten so far. I am going to re-subscribe because for everybody out there to know this. There's a glitch with TH-cam. It will drop subscriptions. There's a number of us talking about it. I just thought that you we're not putting out to contact. Then it comes back up today. By the way I think that car looks great. I just think of all the work it takes just rip everything out and then to put it back together. I've seen a lot worse that had been resurrected. I wish you the best.

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว

      Thank you! I really appreciate that. I’ve been working a lot on trying to make better videos. It’s good to hear that’s it’s noticed!

  • @spikesforge9000
    @spikesforge9000 ปีที่แล้ว

    What would it cost to dip a small truck cab and frame

  • @Chucthihien
    @Chucthihien 7 หลายเดือนก่อน

    very good video

  • @durangodave
    @durangodave ปีที่แล้ว +1

    ahh the good ol days

  • @chrisgray4651
    @chrisgray4651 ปีที่แล้ว

    How often do you change the liquid in the tanks? Or is it fresh for each job?

  • @pedrodea.m.g8767
    @pedrodea.m.g8767 ปีที่แล้ว +2

    Bondo and rust ❤

    • @ricoludovici2825
      @ricoludovici2825 ปีที่แล้ว

      We knew that going in. 'How much' was the question.

    • @CAROLDDISCOVER-2025
      @CAROLDDISCOVER-2025 ปีที่แล้ว

      We are talking about a senior citizen. Car looks good considering all factors.

    • @ricoludovici2825
      @ricoludovici2825 ปีที่แล้ว

      Maybe in Pennsylvania.

  • @RandysFiftySevenChevy
    @RandysFiftySevenChevy 10 หลายเดือนก่อน

    You can tell it was setting with snow on it when the drip rails are like that.

  • @grzegorzcyran9763
    @grzegorzcyran9763 ปีที่แล้ว

    Hello, does anyone know what the chemical composition of these acids is?

  • @user-JLee1
    @user-JLee1 ปีที่แล้ว +1

    things beat to hell 😮 bondo in the floor? that's a new one to me

  • @izzydizzy1115
    @izzydizzy1115 7 หลายเดือนก่อน

    You need the Queen Mary and a chain to get the dent out of the right tail light pocket!

  • @siliconvalleyengineer5875
    @siliconvalleyengineer5875 ปีที่แล้ว +1

    The 57 was beaten unmercefully by all its owners..however with lots of money and patience it can be rebuilt.

  • @weslleyenthonny
    @weslleyenthonny ปีที่แล้ว

    Alcaline doesn't atack the rope?

    • @minute_of_dangle
      @minute_of_dangle  ปีที่แล้ว +1

      Nope. Ropes are a type of plastic. Doesn’t hurt it at all. The chemical is actually stored in plastic drums too

    • @weslleyenthonny
      @weslleyenthonny ปีที่แล้ว

      ​@@minute_of_danglethanks 👏

  • @ronbrock6153
    @ronbrock6153 ปีที่แล้ว +1

    Looks like it was Tropical Turquoise at birth . Seems they got most of the OEM paint off before the red spray.

  • @davidbarnsley8486
    @davidbarnsley8486 ปีที่แล้ว +1

    You have to love all the structural bog in the floors on this thing 😂😂🤦‍♂️🤦‍♂️

  • @2old2rodeo
    @2old2rodeo ปีที่แล้ว

    Nice! Where are you located? What state?

  • @lunkanx7804
    @lunkanx7804 ปีที่แล้ว +1

    👍

  • @gregpiecuch3802
    @gregpiecuch3802 ปีที่แล้ว +1

    Bondo in the floor, that's a new one.

  • @ronaldomartins8506
    @ronaldomartins8506 11 หลายเดือนก่อน

    Cristine?

  • @dramprar1
    @dramprar1 ปีที่แล้ว

    I wish I had the money to do that with mine and start a frame off restomod.

  • @Gearsandoil
    @Gearsandoil ปีที่แล้ว

    Does anyone know what a job like that would cost?

  • @tomswindler64
    @tomswindler64 ปีที่แล้ว +1

    👍👍👍😎😎😎

  • @melgoy2094
    @melgoy2094 ปีที่แล้ว +1

    wow, this ole gal has been through a lot

  • @ozzymd1
    @ozzymd1 4 หลายเดือนก่อน

    Man it seems like the color red is a challenge to spray and to remove also !