ngl your a life savor, I accidently pulled the trigger while trying to disassemble like the real gun and couldn't figure out why the gun was slightly not going on. thank you
Man I surely appreciate this video because I had done exactly what you had mentioned I guess hit the trigger and couldn’t figure out why it wouldn’t go back right (after successfully doing it multiple times ) great save because I couldn’t figure out where I was stuck and realized it at the very beginning of your video thumbs up
@@demarcuslewis1188 basically if you take like a thick paper clip and straight-n it out and make a little hook at the end stick it in there where the trigger mechanism is and simply pull it back to it’s original position
@@bondedout I had a hard time doing this, figured out what you meant though. I just used a really small screwdriver and pushed it into place instead of pulling.
Mate!! I'm from the UK and had the same issue with field stripping my P365, Slide wouldn't come out, after watching this and following your instructions it now does, I want to say a massive thank you !! i've just subscribed to your channel. :)
Before I watched this video I knew how to dissemble so I did and I tried to reassemble it and the slide wasn’t going all the way through then I watched like 20 videos on how to reassemble the fun and I finally found this one thanks bro👍🏼
I got a free beat up one that has a broken trigger guard to the point you can see the slide’s spring. I wanted to make sure everything in there was fine and didn’t have dirt or rocks in there so I watched a video on how to take the slide off (not this one) and followed step by step and got it off. I must’ve whacked the trigger ( cuz there wasn’t a guard) because when I put the slide back, it wasn’t going forward. This video cleared up A LOT of the problems I had. Pride it open with 2 keys for my house, and bingo! Thing works again.
I want to say thank you. My bb’s kept getting stuck and it stopped being semi-auto. I did pull the trigger while the slide was off and it was hard to fix. It wasn’t my nails that got in the way. I didn’t have the proper tools . I’m pleased to say, it’s back to it’s former glory. 😄
I own an actual p365 firearm and I own two of these. I bought them to save money on ammo doing drills and both of them are pieces of trash The first one I did this field strip then after that it didn't want to cycle anymore so I bought another one thinking I just got a bad one out of the batch shot it for a bit broke it down to clean it same SHIT! I've replaced the magazines twice! and they still both do it so my advice is do not take these things apart!! Lubricate them from the outside the best you can and leave them be! But on a side note nice video I enjoyed it and for the people who are unfamiliar with this design and platform They can learn the basics watching your video. Great job!
Yah I pulled the trigger while the slide was off trying to figure out what was wrong with it from the other video I watched an I went to this video an thank God you said something about it but fixed it. Cause you explained something in this video that the other did not. I forsure though I broke it or I was fucked but thanks.
Thank you I press the trigger and I could put it back together, just a small screwdriver does the trick but don’t think is good to keep doing that. So like he said put it on SAFETY. And thank you so much for this video.
I bought this gun and right out of the box it malfunctioned. On a new CO2 cartridge, it would randomly fail to cock after a few shots. It seems the slide isn't moving as it should and there is a lot of friction at certain points of travel. I have not taken it apart, just tested out of box. Very disappointed.
Why did they use a freaking SOFT METAL for the CO2 tightening screw???? Why not use hard metal on the DAMN tightening screw instead of the wrench 😡😡🤬🤬🤬
Yk I watched a video before this to strip my bob gun and when I tried to get it back on it wouldn’t fully go on so I got worried so I came to this video and I fallowed the exact steps and fixed my gun so I thank you
Do you know why my slide is locked up? I feaild stripped and put back together and the slide is locked up in the forward position. I also noticed when I put it back together it was slightly out of battery till I gave it a bump afterwards has been locked up.
@@zoom-nazda ok will do asap. It's just locked up though after trying to rack over and over again eventually it'll slide back and I can tear it down again. It's so strange
@@misteroofy8572 well I have fully took it a part and I have boiled it down to the mag for some reason it's not pushing out enough co2 for some reason so idk really but I have had it for almost a year now
@@jettwildman9672 I agree somewhat because I noticed the issue is it won't blowback. If I put a fresh co2 I can maybe get 3 shots but mostly it's pull back every shot. I'm going to try different brands of c02 next
So what I did was take pellgun oil or motor oil. I used motor oil because I didn't have any pellgun oil. I took the slide off and put a drop of oil on basically any area that moves. Then I put a drop on the seal of the magazine where you place the co2 cartridge tip. Then I blow dryed the seal for a few minutes . I wrapped my co2 cartridge tip with Teflon tape . 3 small layers. Put a drop of oil on top after . I made sure to use steel bbs . They seem to work better. So far no more cycle issues. Went through a full mag over and over. The issue I feel is the mag leak or seal leak plus making sure the slide is lubed correctly. Also you shouldn't rapid fire this gun . Just steady paced shooting.
Just bought this and have tried several different videos about removing the slide and followed your video to the letter and still no deal. Slide will not budge when trying to remove it. I wonder if they(sig) have altered the design at the factory due to many who have been trying to field strip?
Reset the trigger mechanism thru the top of the slide by pressing it to the rear with the hex wrench the pistol came with. Its the flat square metal piece located to the rear next to a little coil looking thing .. just press it the the rear until you hear it click.. easy fix.
I had the same problem and the slide would not move all the way forward when I replaced it. Resetting the trigger mechanism like this fixed the issue. I managed to scratch the hell out of the plastic ejection port cover too when replacing the slide as it seems to be very finicky to get back on. A good idea would be to put a piece of tape over this plastic piece when reassembling the pistol to avoid any scratches, if you’re bothered by things like that.
I had the issue where the hammer was up when I put the slide on and it locked on with the rails but the slide wouldn’t fully close and to say it was a bitch to get off would be an understatement but I managed to fixed it and getting it working perfectly again but just be careful this these very easy to make it inoperable
@@solafide7010 assuming you got the slide on all the way and it won’t come off, I simply just pulled the slide back as hard I physically could and it eventually came off with enough effort but I can’t speak on the condition your gun will be in after that but I would recommend pulling the slide all the way back till it stops and use a thin piece of metal to reset the hammer manually.
The thing at the bottom that you unscrew to change the co2 is stripped in mine. How can I get it to come unscrewed? I wanna shoot it but can't till co2 is changed
I dont have the gun anymore but I would replace the magazine, they're inexpensive but I and others have had this problem as well. To be honest the magazines arent made all that great, but it helps that they sell them cheap
So yeah I learned not to pull the trigger after I already accidently did. Can you provide a link or help how to fix if you do possibly know? Edit: so I already tried taking off the slide but it’s completely jammed I pull and wiggle but it won’t come off. That’s the main issue
@@the_ultimate_seel_person7362 Often so. And for the price of a real gun you can get many BB guns instead.😁 A real steel Sig X5 can cost around €2000-2500 over here (effin insane price) - but an X5 BB gun comes for €150-200...and therefore I got a few of them.😁😁 Never bothered either to go thru a 2 year minimum training in a shooting association/club just to get myself a real steel pistol of my own..
@@the_ultimate_seel_person7362 Yeah. I've seen some insane deals in the US. A double pack of the Beretta APX airpistols for a ridiculous price of only $30 from Walmart just when they had that big clearance sale about a year or two back.. A Beretta APX BB pistol costs about €130 over here I'd say..
I literally hate people that do that I’m 17 but literally have real guns but I still love BB guns for more practice do to the raised price in ammo but yeah the wrote bad reviews about it best one I seen was this man saying that the co2 are just bursting out well it’s him turning it slow the whole time
I DONT HAVE THIS ANYMORE
I have a question is the firing pin supposed to be obstructing the mag from going in a bit or is my gun defencyuve
Why all caps bro
i guess it's kinda randomly asking but does anybody know of a good site to stream newly released series online ?
@Kyler Jakob Flixportal
@Valentino Jordy Thanks, I signed up and it seems like a nice service =) Appreciate it!!
ngl your a life savor, I accidently pulled the trigger while trying to disassemble like the real gun and couldn't figure out why the gun was slightly not going on. thank you
Man I surely appreciate this video because I had done exactly what you had mentioned I guess hit the trigger and couldn’t figure out why it wouldn’t go back right (after successfully doing it multiple times ) great save because I couldn’t figure out where I was stuck and realized it at the very beginning of your video thumbs up
How did you get to go back
@@demarcuslewis1188 basically if you take like a thick paper clip and straight-n it out and make a little hook at the end stick it in there where the trigger mechanism is and simply pull it back to it’s original position
@@bondedout your awsome man thanks
@@bondedout I had a hard time doing this, figured out what you meant though. I just used a really small screwdriver and pushed it into place instead of pulling.
Mate!! I'm from the UK and had the same issue with field stripping my P365, Slide wouldn't come out, after watching this and following your instructions it now does, I want to say a massive thank you !! i've just subscribed to your channel. :)
Before I watched this video I knew how to dissemble so I did and I tried to reassemble it and the slide wasn’t going all the way through then I watched like 20 videos on how to reassemble the fun and I finally found this one thanks bro👍🏼
can u help me plz?
I got a free beat up one that has a broken trigger guard to the point you can see the slide’s spring. I wanted to make sure everything in there was fine and didn’t have dirt or rocks in there so I watched a video on how to take the slide off (not this one) and followed step by step and got it off. I must’ve whacked the trigger ( cuz there wasn’t a guard) because when I put the slide back, it wasn’t going forward. This video cleared up A LOT of the problems I had. Pride it open with 2 keys for my house, and bingo! Thing works again.
I want to say thank you. My bb’s kept getting stuck and it stopped being semi-auto. I did pull the trigger while the slide was off and it was hard to fix. It wasn’t my nails that got in the way. I didn’t have the proper tools . I’m pleased to say, it’s back to it’s former glory. 😄
How’d you fix it? I did this too and I can’t take off the slide, or push it all the way forward
@@bimbum115 there’s a little metal piece that needs to be pushed back for the hammer to re-engage. Little screw drivers work best.
I own an actual p365 firearm and I own two of these. I bought them to save money on ammo doing drills and both of them are pieces of trash The first one I did this field strip then after that it didn't want to cycle anymore so I bought another one thinking I just got a bad one out of the batch shot it for a bit broke it down to clean it same SHIT! I've replaced the magazines twice! and they still both do it so my advice is do not take these things apart!! Lubricate them from the outside the best you can and leave them be! But on a side note nice video I enjoyed it and for the people who are unfamiliar with this design and platform They can learn the basics watching your video. Great job!
Thanks alot dude for clearing $***t up brother💪💯
Yah I pulled the trigger while the slide was off trying to figure out what was wrong with it from the other video I watched an I went to this video an thank God you said something about it but fixed it. Cause you explained something in this video that the other did not. I forsure though I broke it or I was fucked but thanks.
I tried this, but cannot move the slide to a point where it lifts off the rail like in the video.
Idk man
Thank you I press the trigger and I could put it back together, just a small screwdriver does the trick but don’t think is good to keep doing that. So like he said put it on SAFETY. And thank you so much for this video.
I broke it I try to put it back and it don’t go all the way back idk why then I force it now it’s hard to pull it it’s just prop
Damn : (
I bought this gun and right out of the box it malfunctioned. On a new CO2 cartridge, it would randomly fail to cock after a few shots. It seems the slide isn't moving as it should and there is a lot of friction at certain points of travel. I have not taken it apart, just tested out of box. Very disappointed.
Why did they use a freaking SOFT METAL for the CO2 tightening screw???? Why not use hard metal on the DAMN tightening screw instead of the wrench 😡😡🤬🤬🤬
Nah I'm not gonna lie this thing sucks
i think i pressed the trigger and my slide will not come off it’s stuck i don’t know what to do
One of these comments has the secret recipe but its up to you to find it
I tried everything I got it off. I cleaned it and now the slide just won’t go back on.
Make sure you didn't pull the trigger
Yk I watched a video before this to strip my bob gun and when I tried to get it back on it wouldn’t fully go on so I got worried so I came to this video and I fallowed the exact steps and fixed my gun so I thank you
Happy you were able to solve your problem
It’s still stuck
Any help
Do you know why my slide is locked up? I feaild stripped and put back together and the slide is locked up in the forward position. I also noticed when I put it back together it was slightly out of battery till I gave it a bump afterwards has been locked up.
I've never seen the slide lock in the forward position, if you could post a video regarding what is happening i may be able to help
@@zoom-nazda ok will do asap. It's just locked up though after trying to rack over and over again eventually it'll slide back and I can tear it down again. It's so strange
@@libertyfighter346 well thank you for letting me know about this, anything will make it easier to help othere ya know
@@libertyfighter346 ive definitely had some weird stuff happen with my gun as well
i had the same problem, when slide is locked fully back, push the slide lever back up then release the slide, thats what i did, hope i helped lmao
My slide is stuck and it wont go backwards can you make a vid on how to fix it?
Lmk if you figure it out mine is stuck on the catch
@@dustineastland729 If it is catching my brother fixed it I think he reset the trigger
@@dustineastland729 then it broke again so I just threw it away and got a new one
Get better gun🫡
so I have a issue in mind is making me pull the slide after every shot and the bbs I'm using is Black widow by crosman is way?
Same problem . Did you find a fix??
@@misteroofy8572 well I have fully took it a part and I have boiled it down to the mag for some reason it's not pushing out enough co2 for some reason so idk really but I have had it for almost a year now
@@jettwildman9672 I agree somewhat because I noticed the issue is it won't blowback. If I put a fresh co2 I can maybe get 3 shots but mostly it's pull back every shot. I'm going to try different brands of c02 next
Yo I finally found a fix
So what I did was take pellgun oil or motor oil. I used motor oil because I didn't have any pellgun oil. I took the slide off and put a drop of oil on basically any area that moves. Then I put a drop on the seal of the magazine where you place the co2 cartridge tip. Then I blow dryed the seal for a few minutes . I wrapped my co2 cartridge tip with Teflon tape . 3 small layers. Put a drop of oil on top after . I made sure to use steel bbs . They seem to work better. So far no more cycle issues. Went through a full mag over and over. The issue I feel is the mag leak or seal leak plus making sure the slide is lubed correctly. Also you shouldn't rapid fire this gun . Just steady paced shooting.
What if I pulled trigger how do I fix
Followup video on my channel
Just bought this and have tried several different videos about removing the slide and followed your video to the letter and still no deal. Slide will not budge when trying to remove it. I wonder if they(sig) have altered the design at the factory due to many who have been trying to field strip?
Quite possibly
How do you fix that problem if u pull the trigger while the slide is off
Video on channel
My sig p364 have a lick gas problem but is wen I pul the triger explot a lot of gas come out
I feel like that'd be a mag issue
Reckon you could put a silencer or muzzle break on it, even though it's not threaded?
You could hand thread it theoretically
i accidentaly pulled the trigger, how do i fix that
Reset the trigger mechanism thru the top of the slide by pressing it to the rear with the hex wrench the pistol came with. Its the flat square metal piece located to the rear next to a little coil looking thing .. just press it the the rear until you hear it click.. easy fix.
@@nobud421 thank you for doing my job for me😂😂 ill try not to neglect my comments any further
I just released a video regarding the issue, hopefully it can clear things up
I had the same problem and the slide would not move all the way forward when I replaced it. Resetting the trigger mechanism like this fixed the issue.
I managed to scratch the hell out of the plastic ejection port cover too when replacing the slide as it seems to be very finicky to get back on. A good idea would be to put a piece of tape over this plastic piece when reassembling the pistol to avoid any scratches, if you’re bothered by things like that.
@@kodoyama I need help
Can you remove the bb gun goldish barrel inside of it
I think the inner barrel is completely fixed
I had the issue where the hammer was up when I put the slide on and it locked on with the rails but the slide wouldn’t fully close and to say it was a bitch to get off would be an understatement but I managed to fixed it and getting it working perfectly again but just be careful this these very easy to make it inoperable
how’d you fix
@@solafide7010 assuming you got the slide on all the way and it won’t come off, I simply just pulled the slide back as hard I physically could and it eventually came off with enough effort but I can’t speak on the condition your gun will be in after that but I would recommend pulling the slide all the way back till it stops and use a thin piece of metal to reset the hammer manually.
bro ty if i didnt know about that metal piece my friend would've killed me
Oof ive gotten rid of this but I'm glad to see this video is still of use. ^^
Thanks For Watching
How to you fix it if you do accidentally pull the trigger
Theres a video
I posted on my channel
I pulled the trigger disassembling the slide how do I fix it?
Vid on my channel
The thing at the bottom that you unscrew to change the co2 is stripped in mine. How can I get it to come unscrewed? I wanna shoot it but can't till co2 is changed
I dont have the gun anymore but I would replace the magazine, they're inexpensive but I and others have had this problem as well. To be honest the magazines arent made all that great, but it helps that they sell them cheap
So yeah I learned not to pull the trigger after I already accidently did. Can you provide a link or help how to fix if you do possibly know? Edit: so I already tried taking off the slide but it’s completely jammed I pull and wiggle but it won’t come off. That’s the main issue
Same
I can't get mine off rn
@@projectrmx7350 rip. I just ended up returning it, saying something malfunctioned, and got a new one.
@@bimbum115 where did u return it to
@@projectrmx7350 Store I bought it from, scheels
Will this take the real steel grips?
@@sev124 yes but i wouldn't really recommend it these are cheap replicas but it'll fit all the same if thats what you choose to do
@ thanks for the response.
Theres no sig macro equivalent for airsoft is there?
OK so I was doing this and I pulled the trigger and I heard it’s hard to undo so how do I undo it
Video on channel
What happends if you pull the trigger
What do you do to fix the trigger pull sinerio
th-cam.com/video/7pkuwG_nUfM/w-d-xo.html
Hopefully this can help
my slid wen i took it off i put it back on and i cant prime it at all
Did you pull the trigger?
I know this is an old video but my BB guns slide is jammed please help!!
I hope you got this fixed this gun has a lot of problems after a while of use
How do I fix my BB gun if I pressed the trigger
th-cam.com/video/7pkuwG_nUfM/w-d-xo.html
HEY SEEKIE HERE, IF YOU SEE ANY COMMENTS WITH OR WITHOUT MY NAME ON IT ASKING TO CLICK A WEBSITE DO NOT DO IT THANK YOU!!!
Oh my finger nails are so gross i hope you werent paying too much attention to that...
I press the trigger and now the slide won’t go back on can you help
Help please
th-cam.com/video/7pkuwG_nUfM/w-d-xo.html
That's the best I can do for now.
I gun is stuck and can’t put it back
Damn thats tough
"BB gun people"?? .. Oh yes. They do exist. 😁😁👍
Only because we can't get our hands on a real gun
@@the_ultimate_seel_person7362 Often so.
And for the price of a real gun you can get many BB guns instead.😁 A real steel Sig X5 can cost around €2000-2500 over here (effin insane price) - but an X5 BB gun comes for €150-200...and therefore I got a few of them.😁😁 Never bothered either to go thru a 2 year minimum training in a shooting association/club just to get myself a real steel pistol of my own..
@@brorjordas1979 yeah. Here in the states quality real guns often come pricey but the sig Sauer p365 bb gun (my favorite) is only like 70$
@@the_ultimate_seel_person7362 Yeah. I've seen some insane deals in the US. A double pack of the Beretta APX airpistols for a ridiculous price of only $30 from Walmart just when they had that big clearance sale about a year or two back.. A Beretta APX BB pistol costs about €130 over here I'd say..
@@the_ultimate_seel_person7362 no it’s because it’s cheaper to shoot
When I shoot it I hear a click sound 💔 I have the CO2 in 😑
Uh oh, I've never seen this problem before. I'll see if I can find something out. Let me know if you happen to figure it out on your own though please
Mine won’t work
I literally hate people that do that I’m 17 but literally have real guns but I still love BB guns for more practice do to the raised price in ammo but yeah the wrote bad reviews about it best one I seen was this man saying that the co2 are just bursting out well it’s him turning it slow the whole time
I need help
Alright go ahead and give a brief explanation of what's going on
So I put the slide on but it won’t slide all the way
@@zoom-nazda can I contact u
How completely useless.
For those who want to pretend to ccw… epic fail