Fixing bobcat 751 drive motor
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- Finally got the seal kit, time to replace the seals! Unexpected setback though, ended up replacing only a total of 3 seals, rest are old, because some of the seals in the kit did not match. Luckily 3 seals were all it took it fixed the problem :)
Want the support the channel? Consider leaving a like/comment or subscribe, also there are the SuperThanks, Patreon or PayPal options available.
Patreon (Upcoming projects and insight) - / antspants
PayPal Link: paypal.me/Andr....
Amazon wish list: www.amazon.de/...
Want to send me something? - contact me via e-mail: theevilchicken@windowslive.com
Feel free to also follow me on Instagram - / ants__pants
Whenever you are taking apart something like that, I found it helps to use a sharpie marker to mark alignment then there is no guessing how it goes back together.
man, welcome to my universe
@@Ants_Pants lol...
Nice work, I think age will be the culprit with seals that crumble, if the case drain is plugged the pressure will force the oil into the chain case. I have seen hydraulic cylinders with little or no use blow out the seals. It would be wise to check the filters in the case drains, but I doubt that was the cause. Hope it all works well!👍😎
cool, thanks for the reply
Really interesting to see this job done. This one required a lot of mental strength and skill.
A lot
Interesting to see the inside of a hydraulic motor! Always wondered what was in there. I know it was very frustrating to go thru all that trouble and time for a seal kit, and then find some parts weren't the right size. I can totally relate to that!
Yeah it was weird feeling. Luckly it had the seals that were busted
I know it's 2 Years ago , but like I said ! Bro ! I'm catching up ! I'll be working on a 943 Bobcat tomorrow . Keep Digging Brother ! Like your Stuff !!
Thanks Franks. Hope you enjoy the content lol 😅 i consider a lot of my older videos a pile of crap btw 😂
Great job. My tractor has broken the slots on the drive shaft, both sides.
ooof, that sucks bro, how did that even happen?
@@Ants_Pants The shaft of the hydraulic motor turned the slots on the drive shaft, on the left side completely and on the right five teeth broke. Drive shafts are expensive in price.
@@Ants_Pants Sorry for the poor translation
Nice work! Looks like you have a great machine there 👍 I just bought an older Yanmar mini Excavator! It’s going to be really useful to have around my property. Take care my friend 🙂
Now im jelly :D have a great time with ur excavator. hopefully a video about it soon
Hi Ant, good video mate, just in case you are not aware, the higher the current rating of the battery you use with that impact driver the more powerful it will be, you should use at least five amps, you may be already I couldn't see, but just in case you are swearing at a tight nut but only using a 2 amp battery. Bob. UK
Thanks for them tips
Just watched a guy "HowIdidit" do this same repair to his drive motor. He was very knowledgeable on the motor and showed in detail how to replace all the seals in the kit including giving torque specs. I believe you would find this helpful.
Thanks Glen
@@Ants_Pants yep...no problem Andris. Good you got it working.
I don't know if it is possible but if you could modulate your audio so that your voice commentary (which I much prefer) and your music are the same level it would be very nice. I have the audio set and the music comes on at a much higher level than is comfortable. I jump for the volume control and next your commentary comes on at a much lower volume than is clear. Back and forth back and forth..... I haven't noticed this as much on most of your other videos but this one is really that way. Enjoy the content.
Yes i have done that now. Before rendering a video i have to reduce gain of any music by atleast 50% to make sure their kinda on the same level. Sorry 4 the incovinience.
@@Ants_Pants Thanks. I can continue working on your list now. Lol! You are hard on my recliner! Good stuff.
@@douglasthompson2740 😂😂😅
Sad some companies don't want to help the small guy out . Shame on them
hehe, it's fine gotta pull our own weight
Now that im thinking about it, why was that odd-shaped seal so badly destroyed? My guess is that the case drain line was blocked somehow and overpressure killed the seal, any thoughts?
Thankyou.
You're welcome
Excellent
Can I ask was the issue that your 751 would not turn left? I have a 751 that wont turn left but it goes strait back and right no problem, I am thinking I have to rebuild the same motor you did in order to fix.
Its easy to diagnose. Remove the motor from the machine and plug the case drain line or your hydraulic reservoir will empty itself. The bigger lines will stop leaking pretty fast. Then open the motor its only held together with 9 long bolts if i recall. And see in what condition the seals are. Takes about 30mins. To put back together you need a tourqe wrench though.
@@Ants_Pants I bought a seal kit for both motors just want to start with the most likely candidate, which way turning did you have the issue left or right?
@@billerskine7911 depends on wich side the motor was i swapped them with eachother and the problem went to the other side. Going forward was more problematic then backwards
Were you get the kit?
Local repair shop that focuses on forklift repairs
Salut, tu veux pas mettre la traduction automatique en français sur tes vidéos mec ?
La vidéo est ancienne maintenant, as tu rencontré un problème du faite d'avoir remonté avec les vieux joints ?
J'ai fais la même chose sur ma mini pelle U27-4 car dans le kit joint d'origine, certains ne vont pas...
They should be active? I didn't do much
Bonjour , quel probleme de fonctionnement faisait il ?
le moteur n'avait pas de puissance de rotation car l'huile fuyait à travers le moteur plutôt que de le faire tourner.
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻