Enjoying what you're watching? ❤️ You can now support Matt from just £1.99 per month here th-cam.com/channels/WP6vjgBw1y15xHAyTDyUTw.htmljoin ✅ Kept up to date with the latest events ✅ Early access to New Videos ✅ Updates on projects being worked on in the background ✅ Special emotes for comments & live chats ❤️ For full details, click here th-cam.com/channels/WP6vjgBw1y15xHAyTDyUTw.htmljoin
Learn something from almost every one of your videos! I wasn't aware that 0 would disable the first waypoint distance requirement which I have had issues with in the past. Cheers for that!
Thank you Matt, very informative video. I configured my cessna with inav auto launch but it went too low to the ground before crashing not sure what the problem was. I live in Manchester, if you live around or close can i come down and meet you if possible ?
Hi.. how to setup on inav if we want the plane fly at certain speed, example if the plane will fly with ground speed / air speed at 45 m/h constantly. thank you for your help
I have the same problem... saving the missions to eeprom seems to be kind of randsom. Sometimes it works, most of the times it doesn’t. Edit: I wasn’t able to erase the eeprom. I just reflashed the board... seems to be working and the mission is gone. I’ll never use eeprom ever again haha
I went and tested it today. I loaded by sticks drone beep but would go to launch point then hover or land. Then i plugged into app loaded mission and loaded mission and tried again. It just go to home point and hover. I was very close to first WP and my distance is set to 150m. I dont know if some how its resuming from last wp but mission was never run. Also i have switch for WP set after to return to home so clicks that on then off before nav wp on. Looking at blackbox show rth off and nav wp on. but flies home. I made mission simpler now and changed nav_wp_mission_restart to start from resume. i need to test again. but wondering if you know.
Hello mat, I copied your settings set nav _wp_safe_distance=0 and radius to 4000 . In my googles screen appear CANNOT ARM CAUSE OF FIRST WAY POINT IS VERY FAR '' '' '' what can I do?
this is a great video Thanks, I need help once again when i open mission control i inav 2.5.0 there is no map just black screen but it will let me set waypoints just dont know were because no map, in gps menu everthing looks fine bing map works great thanks to you. I just cant get mission control to show a map what am i doing wrong? one more question if you want to cancel mission do you just turn off using switch to take control? Thanks again
Hello, There is a thing which I wonder about. I wanna ask it. I've arranged the mission planner on inav card of Matek f765wing and I want that the aircraft can come back by passing 8 points. I've learned how I can do it by watching your video. However, I want to do some extra missions. For example, I want to activate one of the servos to open cargo doors when aircraft is the fifth point. Briefly, at mission planner, how can we activate a servo at a point we want? I am looking forward your respone. Thank you for understanding and helping.
Awesome video Matt... thank you!. I was wondering, is there a way of showing telemetry on inav, in the same way it is shown in ardupilot mission planner?
Hay Matt......is it possible to set up a waypoint loop ? say to keep the model local testing out a battery etc until FS then RTL ? Also how do you load a mission in MODE 1 ? Cheers Brett
Is there anyway to save and load a mission while your plane is in the air? Say if i was flying normal and decided i wanted to do a waypoint mid flight is that possible, Like connect to your fc over telemetry link maybe?
Hi Matt Fantastic video. Is it possible to have a positioning of the model on the map, for example, launch the model and follow the trajectory on the map on the PC?
Hey Matt, if the mission was in another country, wouldn't the failsafe kick in eventually and then - if set up - return to home? (or if you turn off the radio?)
Howdy, save to FC is temporary. It's lost when you disconnect the battery. Save to eeprom is permanent. so it's there when you load it for another flight. Matt
Been dying to try this with my AR900..but when i go to mission control all im getting is a blue screen with a home icon. My gps works perfectly and even shows my current location on gps, (current gps location) any ideas whats going on? much appreciated
Can not wait to see you to enter a farm and ask for the tractor to put an inav into it and show them how to plan the work of the 2022 Farmer ... cause your site looks like farmland with tracks in the green ... and you were playing a farmer simulator game.
Loading things to EEprom will damage it to Time to time. Evry time while overriting the data overite the previus Data in after a while the EEprom is not able to read the data. It is like Batterys over the Time and yousuage they take damge. I mean you have no unlimited ability to write things to Eeprom. The same kind is for SSD drives, SD cards, USB Stick, jumpdrives... except HDD drives. This Drives Take damage evry Save. After 100-1000 Uses they give up.
Wait a minute! You Brits & Europeans have been telling us Yanks how much superior the metric system is for decades now, and you've been secretly Googling the conversion from centimeters to meters! :)
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
Enjoying what you're watching? ❤️
You can now support Matt from just £1.99 per month here th-cam.com/channels/WP6vjgBw1y15xHAyTDyUTw.htmljoin
✅ Kept up to date with the latest events ✅ Early access to New Videos ✅ Updates on projects being worked on in the background ✅ Special emotes for comments & live chats ❤️ For full details, click here th-cam.com/channels/WP6vjgBw1y15xHAyTDyUTw.htmljoin
God! Bless people who made iNav metric!
Learn something from almost every one of your videos! I wasn't aware that 0 would disable the first waypoint distance requirement which I have had issues with in the past. Cheers for that!
Also, bring back Little Richard in the bench videos ;) since his cousin Cyber Richard made an appearance in this one haha
Thanks Matt. You always have the easiest to follow iNav how to videos!
Matt thank you so much I just copied your settings over to the Dart250 and ready to do a Mission tomorrow.
So juvenile (and informative at the same time) that I HAD to subscribe!
Hahahaha welcome aboard!
Now that's a nice set of waypoints. Try navigating them with "bendy ruler" enabled.
I know this vedio is 3 years old, in inav 6.1.1 how to you prevent failsafe during waypoint mission? Thanks for all your video's
Hi Matt, was wondering how to load mission from Mode 1 radio ? throttle & Aileron on same stick.
Thank you Matt, very informative video. I configured my cessna with inav auto launch but it went too low to the ground before crashing not sure what the problem was. I live in Manchester, if you live around or close can i come down and meet you if possible ?
Hi.. how to setup on inav if we want the plane fly at certain speed, example if the plane will fly with ground speed / air speed at 45 m/h constantly. thank you for your help
How do I set up a trigger in the mission control to drop a payload? I have not been able to figure this out.
hello, how to make a map of the area like yours? in the form of satellite images
hi please witch is the correct command cli for failafe_mission rth? thnak you
Thanks Matt, how do you delete a waypoint from the EPROM permanently? Looks like I cannot delete on my FC even after deleting and saving the blank WP.
Howdy, doesn't remove all points and then save do that? Matt
I have the same problem... saving the missions to eeprom seems to be kind of randsom. Sometimes it works, most of the times it doesn’t.
Edit: I wasn’t able to erase the eeprom. I just reflashed the board... seems to be working and the mission is gone. I’ll never use eeprom ever again haha
Matt I can’t see the map when I click mission control, it says ‘use a stand alone device’
I went and tested it today. I loaded by sticks drone beep but would go to launch point then hover or land. Then i plugged into app loaded mission and loaded mission and tried again. It just go to home point and hover. I was very close to first WP and my distance is set to 150m. I dont know if some how its resuming from last wp but mission was never run. Also i have switch for WP set after to return to home so clicks that on then off before nav wp on. Looking at blackbox show rth off and nav wp on. but flies home. I made mission simpler now and changed nav_wp_mission_restart to start from resume.
i need to test again. but wondering if you know.
Every time i try entering most commands into INAV 6.0 like failsafe_mission = OFF it says it doesnt recognize the command
Can a new mission or updated waypoints loaded/updated during flight?
Hello mat, I copied your settings set nav _wp_safe_distance=0 and radius to 4000 . In my googles screen appear CANNOT ARM CAUSE OF FIRST WAY POINT IS VERY FAR '' '' '' what can I do?
this is a great video Thanks, I need help once again when i open mission control i inav 2.5.0 there is no map just black screen but it will let me set waypoints just dont know were because no map, in gps menu everthing looks fine bing map works great thanks to you. I just cant get mission control to show a map what am i doing wrong? one more question if you want to cancel mission do you just turn off using switch to take control? Thanks again
Thanks a lot!
Do you now if the altitude is MSL or AGL?
Hello, There is a thing which I wonder about. I wanna ask it.
I've arranged the mission planner on inav card of Matek f765wing and I want that the aircraft can come back by passing 8 points. I've learned how I can do it by watching your video. However, I want to do some extra missions. For example, I want to activate one of the servos to open cargo doors when aircraft is the fifth point. Briefly, at mission planner, how can we activate a servo at a point we want?
I am looking forward your respone. Thank you for understanding and helping.
Awesome video Matt... thank you!. I was wondering, is there a way of showing telemetry on inav, in the same way it is shown in ardupilot mission planner?
Hay Matt......is it possible to set up a waypoint loop ? say to keep the model local testing out a battery etc until FS then RTL ?
Also how do you load a mission in MODE 1 ?
Cheers Brett
Is there anyway to save and load a mission while your plane is in the air? Say if i was flying normal and decided i wanted to do a waypoint mid flight is that possible, Like connect to your fc over telemetry link maybe?
nice video, have to you try wp in inav v3?
Hi Matt
Fantastic video.
Is it possible to have a positioning of the model on the map, for example, launch the model and follow the trajectory on the map on the PC?
Howdy Victor, I believe it is but it's not something I have looked at. It's in the iNav wiki though! Matt
Can you plan a mission for a plane in another country?
Premiere at 9pm. Is Matty going to be awake? 😉
can I save on SD Card and load it from SD Card?
Nice!!! build of zohd drift?
will it complete the waypoints or RTH if looses signal
Depends on what you set it to as your fail safe
Matt, what happened to the API maps video, I can't see it. Cheers
It's not out yet Peter, however see here th-cam.com/video/B6Afqnzdp70/w-d-xo.html
Why does my Mission Control page look different to yours? What version of INAV Config are you using?
Hi Peter, see here for how th-cam.com/video/B6Afqnzdp70/w-d-xo.html
Hey Matt,
if the mission was in another country, wouldn't the failsafe kick in eventually and then - if set up - return to home? (or if you turn off the radio?)
Hey Johnny, by default, yes. But there is a setting in the description that can bypass that. Matt
Hey! Mat!!! what's up with the twig and berries mission? man you're killing me!!!
Ok if this happens to anyone else, just start zooming out on map in mission control and you will start to see the map
Good thanks, I am confused by load to fc and load to eprom ...................................help.
Howdy, save to FC is temporary. It's lost when you disconnect the battery. Save to eeprom is permanent. so it's there when you load it for another flight. Matt
@@RagTheNutsOff Thank you
Been dying to try this with my AR900..but when i go to mission control all im getting is a blue screen with a home icon. My gps works perfectly and even shows my current location on gps, (current gps location) any ideas whats going on? much appreciated
Howdy Kyle, err no idea. I would re-download the configurator app as thats definitely not right. Matt
👍👍👍👍👍👍👍👍
👊👊💪💪
Can not wait to see you to enter a farm and ask for the tractor to put an inav into it and show them how to plan the work of the 2022 Farmer ... cause your site looks like farmland with tracks in the green ... and you were playing a farmer simulator game.
牛逼，顶起
Loading things to EEprom will damage it to Time to time. Evry time while overriting the data overite the previus Data in after a while the EEprom is not able to read the data. It is like Batterys over the Time and yousuage they take damge. I mean you have no unlimited ability to write things to Eeprom. The same kind is for SSD drives, SD cards, USB Stick, jumpdrives... except HDD drives. This Drives Take damage evry Save. After 100-1000 Uses they give up.
Wait a minute! You Brits & Europeans have been telling us Yanks how much superior the metric system is for decades now, and you've been secretly Googling the conversion from centimeters to meters! :)
Yes, all the time. As I have added one too may zeros and for quite high lol
Dk mode