Thanks for video it really helped recon my gearbox. Could you please tell me, on 4x4 shaft ( rear diff end) first is a needle bearing then collar with grove.. Does grove face outward? Thank you
dear, do you know the ratios of the gears? because I want to put 16 inch rims at the back, but then the front ones also have to be bigger and we don't know which one? I have a kubota B6000 and are now 14 inches on it and want to go to 16 inches but then I need to know the gear ratios? can you help me with that or do you know which sizes I can take?
do you mean to say the propeller shaft?for the front drive propeller,you need to do is to split transmission from the bell housing because it is very hard to remove the pin from it but if you want to remove cross joint,please watch from my video if you do not already watch on how to remove it.HOW REMOVE PROPELLR CROSS JOINT or just click from my playlist.thank you for watching
tractors&marine MECHANIC I actually need to replace the shaft itself that the propeller shaft slides onto. It’s sheared off at the tip of the shaft where that roll pin goes through. Wasn’t sure what all had to be disassembled once the trans was split from the bell housing
Good mechanic. Fix it all. I'm confused how easy all that bearings go in. For the brocken teeth take a magnetic pen for catch them out the box. In my youth time i fixed Zündapp Mopeds and make them faster. The bearings in this engines fits stronger in cases and the crank. Its intresting me for watch inside little tractors. 👍🇩🇪 Which is the lever for 4WD ?
i guess Im randomly asking but does someone know a trick to get back into an Instagram account?? I somehow lost the login password. I appreciate any assistance you can give me!
@Arian Finnegan I really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff atm. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
Hello, i own a kubota M5030 six cylinder and my problem is that the tractor for some reason in slower than should be. It should speed 28-30 km/h and my speeds 18-20 km/h(2200 rpm). It is revs nice and the wheels are stock. What is going wrong? and what i could improve in the gearbox? thanks
thanks for watching.sir,i have already that video.TL AND TU series model are both the same front axle.pls.subscribe to my channel and find this one.(How to replace oil seal TL2100 ISEKI (L&R) front axle).you can find this one to my channel.salamat.
th-cam.com/video/YVU0OWBW5d8/w-d-xo.html The above is one of my video that you can watch and learn that your engine can fixed it.maybe you do not understand my tagalog language but you can see where was the problem or the oil coming from. the cylinder head there is a cover and remove it.just follow on my video.thank you.i hope you understood.
The oil that pushing into the radiator was coming from cylinder and when you removed the side cover from the cylinder there is a small blind hole that you should to fixed it.
sir yung B1902 namin check na namin ang clutch at pressure plate kapal pa pero bakit usad pagong at parang maingay loob ng transmission. ano kaya problema non sir?
Very interesting. Thank you for your job !
Thanks for watching.
Ur talent is amazing boss bless it channel 😍😍
Good working 👍👍👍❤️❤️❤️
Good me c kanick
Very good mechnik
I have a question, are the three nuts on the drive shaft supposed to be loose or tight. b6000
Thanks for video it really helped recon my gearbox. Could you please tell me, on 4x4 shaft ( rear diff end) first is a needle bearing then collar with grove.. Does grove face outward?
Thank you
it's face outward.thank you for watching.
🚜👍👍👍
Лайк!Где вы берёте запасные детали?
dear, do you know the ratios of the gears? because I want to put 16 inch rims at the back, but then the front ones also have to be bigger and we don't know which one?
I have a kubota B6000 and are now 14 inches on it and want to go to 16 inches but then I need to know the gear ratios?
can you help me with that or do you know which sizes I can take?
Any experience changing the output shaft on a b7100 hst? the end of the shaft sheared off where the roll pin goes through for the front drive shaft
do you mean to say the propeller shaft?for the front drive propeller,you need to do is to split transmission from the bell housing because it is very hard to remove the pin from it but if you want to remove cross joint,please watch from my video if you do not already watch on how to remove it.HOW REMOVE PROPELLR CROSS JOINT or just click from my playlist.thank you for watching
tractors&marine MECHANIC I actually need to replace the shaft itself that the propeller shaft slides onto. It’s sheared off at the tip of the shaft where that roll pin goes through. Wasn’t sure what all had to be disassembled once the trans was split from the bell housing
thanks for video, it realy helped me to replace my B6000 transmission gear.. Is it the same with B6001 ?
Thank for watching.please subscribed share and like
Cette pignon que vous avez le changer correspond à quelle changement dans la boîte merci d'avance pour vos vidéos
Thanks for watching.
Good mechanic. Fix it all. I'm confused how easy all that bearings go in. For the brocken teeth take a magnetic pen for catch them out the box. In my youth time i fixed Zündapp Mopeds and make them faster.
The bearings in this engines fits stronger in cases and the crank. Its intresting me for watch inside little tractors. 👍🇩🇪 Which is the lever for 4WD ?
The 4WD lever is the first one from lower at the right side.
i guess Im randomly asking but does someone know a trick to get back into an Instagram account??
I somehow lost the login password. I appreciate any assistance you can give me!
I'm sorry I have no idea.
@Matias Santino Instablaster =)
@Arian Finnegan I really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff atm.
I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
Hello, i own a kubota M5030 six cylinder and my problem is that the tractor for some reason in slower than should be. It should speed 28-30 km/h and my speeds 18-20 km/h(2200 rpm). It is revs nice and the wheels are stock. What is going wrong? and what i could improve in the gearbox? thanks
I'm sorry I don't have an idea how to improve your gearbox.
May transmission po kayo Ng b6000 need ko po talaga ngayon
I'm looking for a transmission i0n of Kubota b600b
B6000 4wd were Ican buy it
Go here in the Philippines.thank you for watching
Where do you get parts gears sprocket for b7000d
From metro diesel in the Philippines
@@tractorsmarinemechanic thanks will have a try at replacing third and sixth gear any advice on gaskets kits or bearings
Gasket 1/32.You can buy gasket to auto supply
Pls help me to find it
Please, can you make video for front axle oil seal for iseki sial23
thanks for watching.sir,i have already that video.TL AND TU series model are both the same front axle.pls.subscribe to my channel and find this one.(How to replace oil seal TL2100 ISEKI (L&R) front axle).you can find this one to my channel.salamat.
@@tractorsmarinemechanic but sial 23 is differnet
Can you send me your email to send a photo of my problem
I'm sorry.its sial 23.ok maybe someday I will make just for you.
@@tractorsmarinemechanic OK thank you
Hello sir! I have a Kubota b7000 with a z650 engine,the problema is that the engine is pushing oil into the radiator. How can be fixed?
th-cam.com/video/YVU0OWBW5d8/w-d-xo.html
The above is one of my video that you can watch and learn that your engine can fixed it.maybe you do not understand my tagalog language but you can see where was the problem or the oil coming from. the cylinder head there is a cover and remove it.just follow on my video.thank you.i hope you understood.
@@tractorsmarinemechanic thank you verry much for answear,unfortunatly i don't understand what is the problem with cylinder head.
The oil that pushing into the radiator was coming from cylinder and when you removed the side cover from the cylinder there is a small blind hole that you should to fixed it.
@@tractorsmarinemechanic thank you verry much for answear,i have manage to fix my engine. You are the best mechanic for Kubota.
which metal in made gearbox?
Alloy
@@tractorsmarinemechanic iron?....
Aluminum?.....
Aluminum
@@tractorsmarinemechanic Kubota big tractor gearbox made with?
İyi günler şanzıman (kutu kısımları aleminyum) dişliler çelikden yapılır
Başka sorunuz varsa yardımcı olabilirim
bos parehas lang ba ng transmission yan ng B1902..
Magkaiba po
sir yung B1902 namin check na namin ang clutch at pressure plate kapal pa pero bakit usad pagong at parang maingay loob ng transmission. ano kaya problema non sir?
May front drive po b yn?may high and low po iyan e-on mo.
4x2 lang sir pagkinakambyo ko sir ang PTO sa gawing kanan sa baba parang ayaw pumasok. may konalaman kaya yun sir?
Baklasin mo baka may pingas Ang gear