Hello, you could make a video about the application of seal on fanuc robot. there is very little information about this topic. the community would be grateful for sharing this knowledge. I wish you all the best. wonderful channel
Can you make video about arc welding, for example MIG welding. I would like to now what is the necessary equipment needed for it. I have KR C2 robot from 2004. What type of sensores do I need? Should I buy sensors for seam finding, as well as for seam tracking or I just buy one - the laser one. If so, can you recommend me which one should I buy and that is supported by the KSS 5.2 or lower. Also can you tell me what kind of additional equipment is needed apart from the sensors, do I need external PLC or ? Thank you in advance .
Hello I have a question. I have a fanuc robot, and I kept getting spot weld retry fault only on weld #1 and #3 only. So far we replaced E1 motor, E1 motor w/brake cable due to other faults, leaf shunt, ISO contactor and AUX contactor. But we're still getting faults again. Do you know if I'm missing something?
Hi, this video is intersting but i would like to show us how to configurate the parameters of spot welding in reality, which mean to show how to configurate the gun parapeters in teach pendant and how to create a standard programn in TP and how to configurate the orders and events between the robot and the automat (PLC)? We want you to help us to apply all the parameters in the real work not through Robot guide. On the other hand, i request you to explain the TP language and how to read an ASCII backup?** Thank you in advance your are great,
I'd love to, but I do not have the equipment with me. If someone would invite me to make video using their equipment I would be more than happy to do so :-)
Thanks sir for Nice video on this topic.We used to mark the location of weld spot by marker pen on sheet metal so that robot will jog to that spot easily.But then this is bit approximate method.Is there any alternate method for precise positioning weld spots. One more thing.If we have created OLP of spot welding on process simulate or any other software,will this OLP will match 100 % exact position of weld points in actual practice ? Thanks in Advance.
Yes the OLP will match 100% if you have correct base and tool What I mean is you have tool and UF measured now you need to do the same measurements on the real robot (UT and UF) than your program will match 100% to OLP
Hello, you could make a video about the application of seal on fanuc robot. there is very little information about this topic. the community would be grateful for sharing this knowledge.
I wish you all the best.
wonderful channel
Thans for video
Please share experimental video for spot Welding.
Can you make video about arc welding, for example MIG welding. I would like to now what is the necessary equipment needed for it. I have KR C2 robot from 2004. What type of sensores do I need? Should I buy sensors for seam finding, as well as for seam tracking or I just buy one - the laser one. If so, can you recommend me which one should I buy and that is supported by the KSS 5.2 or lower. Also can you tell me what kind of additional equipment is needed apart from the sensors, do I need external PLC or ?
Thank you in advance .
Very informative video.All the points explained are very useful in practical work.
Very well explained, You should make a video of material handling aplication
Hi! Thanks for video :)
Do you know if it have a button to disable welding? I meaning, it do movements but didnt weld
Yes there is one, it's not a button but a setting under MENU -> 2 you should be able to change the setting there
good video
Thanks
explained very good
Antonmursid
🙏🙏🙏🙏🙏✌🇲🇨🇲🇨🇲🇨🇲🇨🇲🇨💝✌👌😁👋🙏
Good
Sir kindly explain and demo in mastering using kuka robot and obera gun
Hello I have a question. I have a fanuc robot, and I kept getting spot weld retry fault only on weld #1 and #3 only. So far we replaced E1 motor, E1 motor w/brake cable due to other faults, leaf shunt, ISO contactor and AUX contactor. But we're still getting faults again. Do you know if I'm missing something?
I mean I would check why you are getting that fault looking at the weld parameters and current curve, this should tell you what's wrong
@@FutureRoboticsChannel oh ok thanks will check it out!
Thank you man !!!
Can you show us how to do make spot weld program
Thank you again.
Sure thing, I'd love to I can make basic introduction in Roboguide :-)
but it would be much better to make it on a real robot ;-)
Hi sir
I need to robot current position move to PLC video
Could you tell me a bit more about what you'd like to do ?
please make one video on spot weld gun program teaching with fanuc robot.
Hi,
this video is intersting but i would like to show us how to configurate the parameters of spot welding in reality, which mean to show how to configurate the gun parapeters in teach pendant and how to create a standard programn in TP and how to configurate the orders and events between the robot and the automat (PLC)?
We want you to help us to apply all the parameters in the real work not through Robot guide.
On the other hand, i request you to explain the TP language and how to read an ASCII backup?**
Thank you in advance
your are great,
I'd love to, but I do not have the equipment with me. If someone would invite me to make video using their equipment I would be more than happy to do so :-)
THANK YOU . I'D LOVE TOWATCH YOUR VIDEOS.
Thanks sir for Nice video on this topic.We used to mark the location of weld spot by marker pen on sheet metal so that robot will jog to that spot easily.But then this is bit approximate method.Is there any alternate method for precise positioning weld spots.
One more thing.If we have created OLP of spot welding on process simulate or any other software,will this OLP will match 100 % exact position of weld points in actual practice ?
Thanks in Advance.
Yes the OLP will match 100% if you have correct base and tool
What I mean is you have tool and UF measured now you need to do the same measurements on the real robot (UT and UF) than your program will match 100% to OLP
@@FutureRoboticsChannel Okay .Thank you Sir
Can you actívate the subtitule?
Working on it. I'll let you know
today i just bent the electrode socket making program correction xD
He he, yeah that happened to all of us :-)
It's all fine unless the water won't shoot straight into your face ;-)
enable subtitles please
Unfortunately TH-cam is not generating automatic subtitles for that video, therefore I'm unable to enable them
Antonmursid🙏🙏🙏🙏🙏✌🇲🇨🇲🇨🇲🇨🇲🇨🇲🇨✌👌🙏💝