I know this video is 11 years old. But, I have this same valve. With the viewing of this video and the prepurchase of the needed parts I was able to repair my Delta faucet in about 15 minutes. The cautions against using too much force were well attended to. Also purchasing a silicone lube designed for faucet repair was a god sent. Once again TH-cam came through for a household repair that did not necessarily need a plumber. Thank you so much.
When he mentioned the tapered springs, he never mentioned which way the tapered end should go into the valve body. Do you know which way you put them in? Or did the kit even have tapered springs? Generally curious.
I'm about to do the same job and was debating on using the lube but now I think I will use it since it's pretty cheap. What do you think would happen if it is not used.?
Same here! Before watching this video I thought I needed a “cartridge “ to fix mine. It was literally under $6 for the springs and seats at Lowe’s and done in 15 minutes. Only thing I did different was I squeezed lemon juice to soften the crud around my round cap first. Thank you !!
Wow! This little video just saved us $320. I saw my plumber at the hardware store and where we had taken the ball and cap to buy a replacement kit. My plumber told me that this wouldn’t fix our small drip from our shower head and he was going to come and take out a section of the wall and replace the entire unit. The hardware store didn’t have what I needed. However, I got home and ordered a kit and the plumbers grease from Amazon and m husband and I did the repair and the shower head is not longer leaking. The repair items cost me under $30! He told me it would be a $350 job! I will add that the dome didn’t want to come off Saturday. We did the tap with the wrench, still wasn’t moving so I soaked it in WD40 for about 15 minutes and it easily came off. Thanks for the information!
I'm experiencing the same exact issues. Thanks for sharing! Delta told me vinegar soak should work too. Hole in the wall sounded too extreme. Hope we have the same success!
@@virginiahoffman8897 I'm having to do this again and wondering if I could just clean up the one part and see if that solves it for now and was wondering what would be safe and effective. Vinegar it is!
Take out a section out of the wall!!!! hahahah. I had someone say the same thing...that there were no replacements to replace my leaky patio window and I had to tear out about 12 inches of wall and buy a larger size window to install! Why are handymen and skilled tradesmen so dishonest!!!!!
Here's a little tip that will keep many of you from twisting off the copper feed lines that he warned you about. Don't use channel lock pliers to remove the rounded cap. Use a pipe wrench instead, because when you use pliers you are squeezing the cap so tightly that the threads underneath are pressed so forcefully against the threads of the valve that you are effectively "locking" the cap in place. A pipe wrench does not squeeze, it only rotates and this is what is needed to remove the cap. I learned this only after trying large channel locks, penetrating oil, and even a torch, all with no success because of the channel lock pliers. Once I put a pipe wrench on the cap, it came off almost effortlessly. I hope the guy that made this video pins this comment to the top so everyone will see it and save themselves a lot of time and expense by not twisting off the three copper feed lines.
I wish I would have see this about 4 hours ago...I was gonna use a pipe wrench, but went for the channel locks instead. Now I have some fun ahead of me...thanks for the tip anyhow!
I used the pipe wrench and still wouldn't move. Use the "tapping" technique. Put the pipe wrench on and the tap the pipe wrench with a small hammer or pair of vice grips. Took me 1/2 an hour of tapping but then it came right off!
12 years laters I today used this video as a reference for repairing my 1962 delta faucet. Thanks for having exactly what I need for an old home that is going on the market with a 12 dollar fix.
I have a 62 model Delta shower faucet as well I have a question about the little spring loaded cups did you have a problem removing them if you're still out there please respond.
@@dwainsellers6453 Wow i was drawing a blank on this and noticed it was 10 months ago. I even sold my house since than. They were not hard to remove but make sure the drain is covered they fly and you dont want to lose. I think this is the video where they said save the old ones and yea the replacements didnt fit right the springs were all that mattered. I hope my memory is correct on this but be ready to catch the springs and make sure your water lines are off! I plead the 5th on maybe getting shot in the face by water from the manifold by not shutting off the main....Pretty sure it was my wifes fault :-). Good luck
@@MS-rl2qz I am sorry I have no idea since this post I sold my home and moved to another state. But if you go to lowes or home depot they have a section for tub and faucet parts. I think they had a small selection and I may of bought several to bring home and match. I cant recall if this is the video that suggested I reuse the original springs as replacement springs did not fit as well.
I fixed my leaky shower faucet today using this video. (I'm a 59-year-old woman.) I did it step by step, pausing the video along the way. Thank you so much! Saved myself money and increased my self-esteem!
Great instructional video. When I initially tried to remove the dome cap, I almost twisted the pipe but fortunately stopped before I did any damage. I called a plumber and was told it wouldn't be that much of a charge but when the plumber arrived and couldn't get the cap off, of course the initial quote wasn't even close. I was told by the plumber that there was no way of removing the dome cap and he would have to cut an access panel in my bedroom wall to get to the pipe behind the shower in order to cut it off and replace the faucet for the low low price of $700. Uh.... yeah right. Off to TH-cam I went and came across this video. I sprayed some PB Blaster on the dome nut 2 separate days just to let it soak in gave a couple of good taps just as the video shows and off came the dome cap. All I had to do was replace the two springs that had the rubber pieces on them which only cost me $1.98 at Lowe's. That's a big difference compared to $700. This shows that if you're willing to do your research and put in the work, you could pretty much fix almost anything yourself. Thanks for the video. It was most helpful.
I just had the same problem, a friend who is a plumber couldn't get the dome off. He said we have to go in from the back and change the whole valve. He also recommended getting an access panel for where we make the hole in the back to get to the valve.
Well, that's absurd. If it comes to that and the bonnet nut just won't budge you can always just carefully cut it with a dremel tool. U can't be serious, u can get a replacement for under $10 on amazon.
Great news! After watching your thorough explanation, I fixed my leaking faucet. Thank You!!! This is best feeling ever. I feel so empowered, Thank You.
Thanks! 13 years later, you not only saved us money, you also saved us from having to wait for the plumber. Our Ace Hardware had everything we needed. I hope you still read these comments to see how much good you did over the years by posting this!
Thanks for the great video, your instructions were perfectly documented and the disassembly went smoothly. Once I had all the parts removed I had to clean the internal minerals off the inside with white vinegar and baking soda (took hours for it to work, next time I'll buy a chemical to do the work). FYI, I was able to use the Danco Repair Kit #86971 for Delta with the #212 Stainless steel ball it cost around $12-$13, the kit came with everything to rebuild without the adjustment tool in the video. To get the tool there was another kit for around $18 at Lowe's but it had the wrong ball so I took a chance that the ball tension would be good and it worked out well. Thanks again for a very well done video!
Thank you for your video post. I am familiar with this repair, but my son is not. He was able to successfully complete the repair after watching your video and with my help along the way. Saved him lots of lost water and a plumbing bill on a Sunday just before Memorial Day. Well done.
I'm so appreciative of this video; I wouldn't of had a clue without it! My experience: my 1970's Delta shower valve hot water stopped flowing so I disassembled it to clear the obstruction. After reassembly it leaked. I tried to get by with just a set of new springs and seals (Delta RP4993G $5) because the ball and socket still looked good and were smooth. However, it still leaked. Due to water flowing into the wall when in use I became frustrated and stopped using the shower for a year! Eventually I attempted to resolve the issue so I purchased a complete rebuild kit (Delta RP77739A $24 at Home Depot) and it worked perfectly! The springs and seals kit probably would have worked fine for newer valves, but not for my old valve. I just thought that I'd share my experience for other DIY'ers dealing with this.
Otto, Just read your comment- kinda backs up my experience. There may be some subtle details in the Delta parts that really make a difference, like a Stradivarius
Thanks to your comment I found the right part I needed. I just couldn't figure out why the part I had seemed to not fit properly and gave up for months thought I'd give it another try and seen your comment and it worked thanks soooooo much!!!!
Watched this 12 years after it was posted and it saved my butt. That part about making sure not to twist off the tubes coming out of the part in the wall was worth its weight in gold. With that tip in mind, I proceeded with caution. Sure enough, I can't get front dome off because it is frozen on solid. I am going to call a plumber to install the repair kit I already have on hand. THANKS!
Vanessa from Canada just wanted to let you know the video worked like a charm. The whole thing started this morning when we could not turn the shower/bath off.. the water kept running. I turned off the water into the house. Before starting to prevent a flood through the ceiling into the basement. Important for those that know nothing about plumbing or leaks. I took the shower head apart then stopped to look to see if I could get help on line. Your video instructions/details were perfect. I would not have known about the washer/springs inside. I used a screwdriver and got it out without any hassle. Tapping the valve thing.. came off like a charm. I cleaned off the copper valve and used some plumber grease was still good so it did not have to be replaced. It was the up graded one.. like yours in the video.. I followed your instructions to a T. Thank you helped me out a lot cost me $10 for the parts I bought the kit. Could have just used the springs and new washers for $3 but decided to buy the kit and just replace the plastic parts to be on the safe side. Things are tight and I could not afford a plumber. P.S. Was much easier to fix than the toilet :D
Hi Vanessa, im also in Canada and have the same Delta faucet, and it leaks when you shut it off...unless you put it to Hot or Cold. But when left in the middle, it leaks. Where did you purchase the kit? I went to Home Depot, Lowes, Rona, and no luck! Thank you
splash Splash, also in Canada and I'm very interested to hear this answer. I'm looking at Lowes and it doesn't show that ball valve, which I think seems to be the key for the repair.
@@jillianvash1989 So i went to a place called Plumbing Plus I bought the 2 seats and springs, and a new cam(white plastic cup) and bushing. I installed today and it worked like a charm! I reused the steel ball. No issues
splash Awesome. I'll keep this in mind. I've checked more of the comments here and I'm seeing references to a Home Depot sku (US). But I searched Home Depot Canada and saw a repair kit with a picture of the same handle as I have and the repair kit looks just like the HD US kit. I'm leaning there. The big issue is my plumber says the screw to unscrew to get to the rest of the juicy stuff is rusty and he is doubting he can get it off. I have to find a way to get that screw off.
@@jillianvash1989 Just an idea, but maybe soak it in penetrating oil for a day or 2 before trying to remove the screw... Might be worth a try as to not break anything. Hopefully it goes well for you!
I'll add my voice to the choir of happy DIYers below. Thanks for the great details, they were exactly what I needed. The only thing I did differently is that it was a bear to push against the springs to get the bonnet nut back on, so I used a 5/8" socket over the post and it distributed pressure evenly while compressing the assembly and springs. I was also glad my local ACE hardware had all the parts, including the little two tab adjustment wrench. What a ripple effect this video has had! Nearly 4 million views! Thanks again Ramon.
Thank you (x1000)! I was intimidated to attempt this repair but your video gave me the confidence to give it a try. It took about 45 minutes from start to finish to repair my shower valve and saved me a ton of money. Thank you for providing a well-produced, easy-to-understand video!
Your video explained this so well that I, a 60 yr old woman, was able to change out the shower cartridge and repair my own shower. You saved me a few hundred dollars. Thank you very much.
After being told by two plumbing parts shops that it cannot be done yourself, you need special tools, and it will take five and a half hours, and I called a plumber for tomorrow who wanted $175 per hour, I stumbled across this video. Got the parts. The fix itself, while starting and stopping the video, took about 45 minutes. No more leak. Thank you.
This was the best video for fixing my faucet/shower by Delta,but cost me $18 to fix what the plumber told me was minimum $150. Really want to thank you!
This was great and absolutely helped us fix our 30 year old shower faucet. The presenter was helpful and knowledgeable, the camera work perfect and it allowed us to understand step by step what we needed to do. thanks again.
Just followed your instructions and it worked perfectly to stop my leaking shower. I had to use PB Blaster on the dome cap. Sprayed it and just let it sit for about an hour. Went back and it popped loose. The rest was easy. Fixed it for a grand total of about $10.00. Thank you.
Greg, thanks so much for this well paced, well organized and detailed video. Moved into 30+ year old house last year and this faucet drip was the latest issue. Clearly not replaced since house built this faucet is unique by today's standards so not just any generic leaky faucet video would do.
Just managed to complete this repair thanks to this video and the advice in the comments! I had trouble getting the cap off but I noticed the whole thing was turning so I stopped right away--heeding all the warnings about twisting off the copper lines. I started tapping at the cap and poured a kettle of boiling water on it and it loosened up nicely. Then it turned out that the replacement ball wouldn't work with my handle because it doesn't have a screw hole, so I just used the original ball with a bit of the silicon gel on it. Although the handle isn't quite centered anymore (see above), I didn't want to try twisting it back in the other direction and risk doing further damage. It works smoothly in any case, and there's no more leak! Thank you for this tutorial and to everyone who shared their tips and experiences to get me through this.
Thanks so much, Greg! Just got it done successfully with NO LEAKS :) -- by luck and the grace of God, the dome came right off. Watched your video a few times before starting, then kept it on through every step with my iPhone. You're an outstanding coach!
I have no doubt in my mind this video just saved me a couple hundred dollars. My Delta shower faucet has been dripping for a while, as has the Delta sink faucet in the same bathroom. I repaired the sink faucet first and that was easy. The shower has a push-pin diverter which also leaked, so I replaced it too. The shower dome was stubborn, and it took some WD-40 and patience, but it too opened up without damage to the faucet. Just need to recauld the shower faucet now. Thank you VERY much.
I utilized your video today on my Delta. Mine was exactly as pictured. I bought a complete rebuild kit for $18.00 and the drip/leak is now fixed. Thanks for a very well detailed, patient and professional video. I am definitely now a fan and subscriber.
13 year old video helping me out today. Been having a leaking shower head since I moved in and decided to pull it apart. I have a plastic shower ball too so it also leaks from the handle. All the newer videos show plastic shower valves you replace but this is the style my home has. Copper with a plastic ball. Also I didnt see any springs when I pulled mine out, go figure. I'll check again but I wouldn't be surprised. Half the plumbing in this house was done by a hack job. Thank you 13 years later!
Thanks so much for this great tutorial. I just saved my Dad some big bucks by knocking this out myself. I doubt I could have accomplished it with as much ease had I not had this video for reference. Heck, I was even able to sound like I knew what I was talking about with the True Value employee who helped me find the kit! THANKS SO MUCH, Ramonas Plumber!!
Thank You so much for the video! Just fixed my Delta shower Thanks to Gregs excellent video. Checked several videos but because this model is getting old now all I saw was the cartridge replacement types. Then I saw Greg's video & it matched what I had! Whipee! Then I got a call from a Plumber I had called & he told me he was to busy & I'd have to wait. He also said I could call other plumbers if I want it done this weekend but they would charge me time & a half. I said Thanks for the Info, got in my car, went to Hardware store, got a $5 Delta Seat & spring kit, came home, replaced only the seats [Used original springs], & LEAK FIXED!
You sir are an awesome teacher. This was so informative. You have the same voice of the man that did the educational films (on a reel) back in the day. Remember those? That’s a compliment. Thanks for sharing 😊
I had no idea how to fix the shower leak until I saw your video! The video has my same Delta know so I watched and then went to HD and bought parts, watched the video again and then fixed the shower exactly as showed. Thank you very much for taking the time to make the video!
Thanks! after a week of soaking the thing in vinegar I finally got it apart without ruining anything. Im glad you noted that in the video or I for sure would have broken the pipes.
Great video, pretty easy fix. The first step you need to do is call Delta and talk to customer service. Delta has a lifetime warranty on all faucets. They will send you the replacement cartridge for free, a$60-$75 value. Just talked with them today while dealing with a leaky shower that was installed 24 years ago. Was on the phone for 5 minutes and they are shipping me a new cartridge today!
Thank you so much for this video. It was exactly what we needed to do our repair. It was easy and cost less than $17 total for the repair kit (Delta #212), the silicone grease, and tax.
Great video. I never would have attempted to fix my shower without first seeing this. My original Delta fixture was circa 1991 and the stainless steel ball had a plastic sexagon shaped fitting attached that fit inside the exterior round handle. I couldn't find any replacement even on the Delta website. But after reading some of ramonas replies to comments, I just cleaned and greased up the original steel ball which was still in good shape, and installed a set of Danco 86968 seats and springs, that matched exactly with my originals. I picked them up at Home Depot along with a small cup of Danco Silicone Grease. Total cost was about $11. Following the video it took about an hour to fix my dripping shower that I had been living with for a year and was getting worse. The shower handle now works much smoother too. Thanks so much for this video and info.
I've fixed mine today, the toughest part was to turn off the dome cap. Sprayed PB plaster on, and left it overnight, the next morning it came off as soon as I twisted it. Only changed the springs and washers. It cost me a total of $4.50. Thank you so much for your video.
For that special tool to get the spring thing out - a crochet hook works great! Better than the phillips screw driver - it even looks like the tool! It took me a while to get the dome cap off - I used WD 40 to loosen it over night and then tapped a lot - that helped (along with prayer! :) After that - easy peasy! Thanks for the great video!
Excellent instructions. My Delta valve only says 1962 and US Patent 3056418 so wasn't sure which parts to order. However, thanks to another sleuth, he confirmed the seats RP4993 and steel ball RP212 were the right ones. I used a full repair kit RP77739 which includes the right seats and steel ball (I used my old steel ball) and new plastic cam with rubber packing. Works like new! (My domed nut is only hand tight and works perfectly that way). By the way, my valve had the longer springs but the new shorter springs had a wider taper so I figured they were a design mod, tried them (they work with the special tool) and everything works perfectly. I have a new set of longer springs as backup just in case.
Great video! I used the tap method on my dome. It had been on for 31 years. I kept a slight pressure on the pliers while tapping the dome with a plastic mallet. I also kept moving my grip point around to be able to tap the dome all of the way around. I also took off the whole back cover on mine to reseal it, and found hot and cold valves that had flat blade screwdriver shutoffs, which allowed me to get parts and leave the water on in the rest of the house.
I know it was posted previously, but this video and a little common sense saved me. *** Please note the the cam in his right hand at 6:45 in the video. My cam and the black seal was not already together. I had to assemble it. It caught me because I was so focused on replying the video in my mind. Nothing that turning the water off, fixing and then turning back on. Thank you for posting this.
If I may add a tidbit of information to an already excellent video for those folks who might live in a condo where there is no means to turn off the main water supply by yourself. I have learned, you may have the type of shower valve that enables you to turn off the water to the shower right at the shower valve. To find out, remove the knob and the backing plate to expose the valve. On each side of the valve is a screw. Turn each screw clockwise just enough till both the hot and cold water shuts off. Then you can work on rebuilding the valve.
Thanks for the info on condo valves. I was sure I had to turn off the whole building until I read your comment - you saved me calling in a plumber and sending ut notices to everyone to turn off the water.
This is one of the best "How to Videos" I have seen on here. Very helpful. I would not have figured out the springs, or even knew they were there without it. One trip to Lowes, and following the steps in your video, and BAM, fixed in less than 20 minutes. If I lived in Ramona, I know who would get all of my plumbing business. Thanks!!
I just saved $300.00!!!!! The chrome collar was stuck and I mean stuck...tried many times in the past to loosen it. I just tapped all over it, soaked it down and tried an hour later, and it came off with channel locks. Replaced the seals and no more drips. Thanks!
after replacing the Ball valve , seats and springs, the drip got worse... so I put the old seats and springs in with the new ball valve, and no more dripping. just a tip if y'all have the same issue.
Just used the delta repair kit from home depot and had a hard time getting the chrome dome (that made me chuckle) easily screwed on. Took lots of pressure to push the cam/black washer back far enough to get the cam tab to lock in place. Then it took a lot of tightening to get the dome fully threaded on so that the chrome spacer (that the dome butts up against) didn't have any play in it. Attached the handle, leak is gone but handle movement is notchy up/down and side to side. I used silicone grease and the correct size cups/springs were installed properly. Only thing I can figure is that the new springs are pushing the black rubber cups slightly into the ball openings. Maybe they will wear some over time. But I'm keeping my old springs just in case. Just an fyi for others.
Great! if you tipped the restaurant server, then tip the plumber for same reason. Altho I very much value comments and read every one and have even brag to friends that I have helped so many, I too love money! Actually the water saving is another thrill for me, but ... Thanks in any case. Greg
I see I wrote a comment 8 month ago. I actually got the outer nut to finally break loose, and referred to this video twice and now I no longer have a leaky shower. Thanks again, and I hope others aren't as intimidated as I was on this job! Thanks!
Great video but Sydney's explanation of the positions of the seals and springs was key for me (my old seals were so chewed up - it was hard to figure out). Many thanks
Thanks! Great video! There are a lot of small variants to this depending on the kit and the shower faucet. However, follow all the directions including the cheap grease. He doesn't say it but when you put it together, first use, the black valve seats you install may get damaged with just metal to rubber rubbing. The grease allows the rubbing until the surfaces are worn in. I thought, don't need grease it'll just wash away, but use the grease! Also, I did have to use more force but I almost gave up and called a plumber. I tapped and went both ways on the cover with more force than I like but did not damage the hidden piping. The Phillips works good to make sure you don't drop the spring or the black rubber valve seat. They push in and pull out easy. Get a kit with the wrench as I used it to adjust the existing bonnet tighting ring. I am having some major plumbing done later today I can't do, so I did this when plumbers will be handy later. If I messed it up bad enough, it could cause the water to the whole house to have to remain off. So, if you are worried, plan for a plumber who can arrive quickly.
Video was supremely helpful! After finally finding the right kit with the correct springs and caps, I was able to perform this procedure easily. I have two questions. 1) I can't seem to find the silicone product you mentioned in the video. I don't see a link on your DIY site and couldn't find it searching the web either. 2)After installing the repair kit, i still have a slow leak at the tub faucet. It is especially concerning because it is warm water which is leaking. Does the silicone make a difference in that regard? Are my caps not seated properly on the ball maybe? I did not have an adjustment ring on my fixture. The dome was the only thing that held the cam in place and tightened it down. Feedback would be appreciated!
Quick thank you & comment; Water pressure to my shower and bath was slowly diminishing - particularly the hot water. I screwed around with it over a few years with no improvement. I looked at the faucet parts but nothing seemed to be wrong. After watching this video, I took a chance and bought a kit online and then replaced everything as shown. It works great now. Pressure's good, lots of hot water. I don't know why this worked but it did.
What do I do if I did twist the internal components when unscrewing the dome nut? Is there an easy way to get them properly realigned or do I simply twist until straight?
I just did the same thing. The pipes are twisted but not leaking. I replaced the washers and spring. All good. The issue is that instead of the knob lined up to 12:00, it is now pointing at 10:00. Can you twist these back? If not, where do you get another one of these shower valves or do you just start over with a new modern one?
jimmy ashworth I did the same crap!!! Twisted the 3 mini copper lines(the ones he showed cracked) connecting to the water line. My 3 mini lines came off.
Did I miss the part after shutting off the water to the house where you have to drain all the lines? What about shutting off the water coming from the water heater?
@@cmdoggy24 The water heater is supplied by the house cold water. While water can still be in the pipes, it is finite. If a circ pump exists that needs to be turned off. If a two story building more will drain out. Different piping arrangments exist, but I reply to a common layout.
I watched this video the 1st time 4 years ago. Now I have to replace the rubber cups again and I watched a different video. BIG MISTAKE! It never mentioned the little tool you need to tighten the plastic ring around the dome. Thank you Mr. Ramon, I'll never watch someone else's plumbing video ever again! ☺
Excellent video. Perfect job explaining things as you go. I had a 40 year old tub faucet just like this one that was leaking. Was able to find the parts at Home Cheapo. Watched this video about 4 times before I started the project. If you follow his instructions closely it works great.. Had to rebuild a Delta kitchen faucet about a year ago and it was a real PIA. It had the tapered springs and seats and it literally took me two hours to get the springs and seats in. This shower valve was not near as hard. FYI , if your valve and parts look just like the one in this video, you need a kit for the 212 stainless steel ball. It is very common and most plumbing supply and big box stores have them.
greg chick Yes you surely did help, thank you so much. Now looking for my next project. Actually, my sister owns the house and did the work, but I showed her your video and “supervised.”. Lol
Wanted to also share the Amazon link to the repair kit I used: Delta Faucet RP77739 Repair Kit www.amazon.com/dp/B00LCUJ9PY/ref=cm_sw_r_cp_api_i_8DU0Eb9GQSNV8
WARNING! On older models (circa 1998), if the cap ring that holds the valve in place does not come loose easily, DO NOT EXERT FORCE in an attempt to break it free. Doing so can result in your twisting the entire internal faucet structure, destroying it beyond repair. Trust me. I did just that and turned what should have been a $40 easy home fix into a $500 two-plumber job. The plumbers said they knew of this problem, and whenever they discover a frozen cap ring, they immediately go to the hack saw to cut the ring off. Replacing the ring and the valve is better that replacing the entire faucet.
Great instructional video, with good lighting and clear explanations for every step. I'm a food salesperson by trade and not an all-in DIY guy. The whole repair took about 10 minutes, with some of that time spent walking back and forth to the street to turn off the water main to the house. Thanks!!!
Thank you, That is my intent, to be clear, easy to follow and make sure you have all you need to succeed as a DIY person. I just wish more people in the world communicated and cared as much as we do!. Your thanks are why I do these things...
major issue with getting the cap off. Home depot does not sell replacement delta shower cap only kitchen faucet. The associate said she never heard of someone having a problem with it. HA! I put it back together and hope my wd 40 and blast off make a difference over time. Not sure if I damaged it at this point. There needs to be a plan B, C, and D, in this video for this problem. I'm looking at calling a plumber - what else canI do?
+A DECESARIS ----calling a plumber would cost money...how much I would not know. I am having the same problem, and I do not know what to do. Any suggestion?
I have this exact shower valve (which I know is old) but this video was the perfect tutorial for replacing it! Greg does a great job of explaining what to do in a no-nonsense manner with good quality video. Thanks so much!
great TH-camz vid... very VERY true, do NOT force the dome, that calcium will hold the threads...tape it or squirt CLR around it... But, He didn't say anything about the Delta too in the beginning...What frick is Delta tool
I believe the two tools are: "Delta Faucet RP23489 Plumber's Hook" and ""Delta Faucet RP1974 Wrench". Buying both with my renovation kits (a few extra bucks). Will let you know if these aren't it.
A gigantic thank you for your video. The shower head was still dripping intermittently after I replaced all internal parts. Then you pointed out that you need to adjust the outer plastic washer to put just enough pressure on the "ball" to make the stem handle move up and down smoothly bit not too loose or too tight. That was the problem and I fixed it without buying anymore parts. And the handle is no longer woobly! Two thumbs up!
I got my replacement kit from HD. When I tried to push my gasket/spring back into the holes they did not sit flush like the old gasket/spring did. They stuck way out, and that's with the smallest spring and gasket. Any ideas?
Same problem here. I had to line up the plastic washer with the faucet body, then used a screwdriver to push it and hold it in the slot while I turned the nut to tighten it down. It worked but had me bit worried.
Mr Skyler is correct! The springs and cups that are at the 1:00, and the 11:00 positions stick way out. I used the exact same springs that were in the unit. The designers of this unit should have had the cups at the 5:00 and the 7:00 positions so that gravity would have at least helped a little bit, instead, gravity hindered the process making it a real pain in the arse. I did this repair about 15 years ago for the same faucet and DO NOT remember having this amount of hassals getting the cups to stay in their place while trying to insert the ball.
@@Biofan813 Sounds like you had trouble with the locking ring and washer outside the valve - the other commenters are talking about the spring-loaded gaskets INSIDE the valve.
@@nouveau53 Same thing with me!! What a hassle and I ended up not putting the cups over the springs. I don't think that it's going to work because its still leaking and I'm afraid to turn on the water!!
@@nouveau53 What did you do to overcome the cups and springs sticking out? I don't want to call a plumber! Too bad that I tried to fix the damned thing without turning off the water at the road, but I tried and tried but it was too tight!! Ended up calling 911 that put me in touch with the fire dept that came and turned it off for me. The gushing water pushed the old springs and cups out of their places and down the drain.
Wow! Thank you so much Greg! I did it! No more leaky tub faucet. It has been driving me crazy for weeks. I knew that my plumber was going to charge me at least $150+ for the job (as he has done it once before). For about $5.00 I did it on my own with your help. The video was exactly what I needed and no problems! I almost can't wait for another plumbing issue, so that I can come back and get more help from you! Well, maybe I can.... ;). Thanks again!
Thank you, Thank you!!! I did it, my son and his friend cheered for me LOL, It has been a trickle for a while and was making my water bill high, then last night after I called myself trying to fix it, a full blown gush, had to turn the water off, went to Lowes today and watched your video a few times, I can't believe I did it!!!!!
DIY ers are legally justified in doing their own lite level repairs. These people sometimes opt to not do a repair themselves and say wow I had no idea it was all that involved. I am not suggesting they do all jobs. I am allowing them to save water in a tough economic time. Saving water is more important. I recommend calling a pro. If you read the hundreds of comments you will learn something. I as well spend many hours a week supporting the Plumbing industry in many ways, do you?
It worked until I was able to pick up the supplies this morning at Orchard Supply. Had to reuse the ball; the new one was pretty sad, with rough edges that would have worn things out. No biggie; it was the seals that I needed. The toughest part was pushing things back into place because the spring pressure was much greater than I expected and had to make sure the key was still lining up. But it all works now. Thanks for the help!
THANK YOU THANK THANK YOU! My brother and I just did this and fixed my leaking faucet/shower. Dude, you are awesome, I have subscribed to your channel and look forward to learning more! I'm excited because I didn't need an expensive plumber! It was DIY EASY. Thank you for your clear instructional video step by step you are the MAN! Anyone worried about doing this, trust me it's EASY just listen, watch closely and DIY it's easy!
Thank you for making this video I did what you stated in your video and I was successful. Please keep making videos because there are a lot of people making plumbing videos and have no idea what they are doing. I had to dig to find your video but it was worth it because you helped me save money.
This is the CORRECT and complete instruction on using all of the parts and tools including the odd U-Y shaped “wrench” that comes in the Delta faucet service kit. Dave yourself time and get the kit the includes the ball control like he shows and DONT forget the food safe silicone lubricant sold separately for about $5. 35 yr fixture operates super smoothly and easily now with no drips following THIS video after a few fails with other instructs. Well done!
Thanks a million! Between our unit and the rental unit next door, we have four of these Delta shower control heads. The addition of this video has really made my day after viewing Sea Foam video and buying it and tuning up my Nissan Frontier my weekend is complete. So concise and important information.
I can't thank you enough, had no problem using a screwdriver getting the seals out- Only think I had problems with was the chrome dome- pliers taps as per your trick, and it came off after 32 years. Looking forward to sleeping tonight without the drip ;) ~~~ Can't believe I am such a procrastinator and waited 3 years to do this- after I bought the parts! I am now searching for motivational speaker videos on youtube.
Thank you so much for the excellent video and helpful comments. Two plumbers insisted that they'd have to cut through the wall to replace the shower valve because the dome was stuck, but with some tapping and a small gas "plumber's torch" from Lowes (I put it on its lowest setting, and then applied the tip of the flame directly to the dome for 30 seconds, as you mentioned) I was eventually (I heated it twice) able to unscrew the thing. One thing that wasn't completely clear to me: the ball needs to be inserted so that the two "eyes" are above middle (on the ball from the Delta kit, this meant that a little notch on the lever was facing downwards). In any case, thanks again - I would have never tried this myself without this video.
Thanks much for this helpful video. I was totally unaware that this job was as simple as a kitchen faucet drip repair. I thought this was a job only for the pros. You saved me a call to the plumber which means you saved me at least a hundred bucks. I do appreciate that help!
Can't thank you enough for this video. We actually had a successful plumbing project for a change. Our dome removal was a lot more difficult than yours but it finally came off. The most challenging part of the project was finding the replacement parts. We got the dome and handle replacements at one chain hardware store and the internal parts at another but that beats paying for a plumber to come out and do such an easy repair. Not that we don't love plumbers :-).
Your video included details I did not find elsewhere that were highly useful. I am so glad I came across it. Excellent information and presentation. Thank You!
Your procedures in the video are spot on. Thanks for posting it up. I grabbed a rebuild kit from ACE hardware and forgot the silicone. I ended up using dielectric grease as a substitute on the seats and ball before installing. The grease definitely helped assembly and probably helped the life of the rubber in the kit. Thanks for a straightforward explanation. Took about ~20min and $16.
Excellent How To video. I just wrapped up the repair, a repair I would not have had the confidence to attempt. A great tip on the cap ring. Mine was really on there. A few knocks with the pliers and then some thumps and off it came. Thanks again.
Thank you so much for this video. We needed a new ball assembly since the old ball was all chewed up at the part that connects to the handle. So we bought a replacement kit. The instructions that came with it were not detailed enough, and it took me about 3 hours of struggling with this thing until I watched your video. At one point I had it back together but the handle was in the up position to shut it off. Another thing that happened was that the water came out great but it wouldn't shut off no matter how I turned the handle. Finally, I had it together and the water back on when I discovered a leak so I unscrewed the part that holds the ball in place and we had a gusher. In fact, both the seals & springs blew out. I only found one, so I thought it went in that bottom hole (the hole you said not to worry about), and I couldn't figure out why it was still leaking when I got it all back together. After watching your video and realizing there were two seals, I went looking for the second seal/spring assembly & found it right where I had put it, on the side of the tub. I put the seals & springs back in, tightened the other part just like you explained, tightened down the plastic piece on the outside, and all works great now. Thank you so much!!!
Fantastic video presenting knowledgeable information for the old Delta shower faucet leakage repair. It helps an ordinary people to save a lot of money in hiring a professional or in the potential rebuilding of the walls for a successful repair. Thanks a lot!
Thanks so much! Your clear and easy to follow instructions helped me fix the leaking shower faucet in about 15 minutes. I really appreciate you taking the time to put together this repair video. Cheers.
Not exactly perfect explanation on how to put the ball piece back in there position wise. Took me three tries until I got it back in there with no leaks (my bad, just keep trying). I am really thankful for this video and you saved us $200, which is what the plumber was going to charge to fix the leak. I noticed as soon as I pulled off the ball, the spring on the cold side was flat and had no give to it. So there lied the problem and I had faith that Delta sending me (for free) the seats and springs was going to work. We have a 20 year old faucet and we aren’t the original owners of the house, but they still sent them out as a courtesy. I used the pipe wrench method like someone else had mentioned in the comments and it came right off, no issues. This is something any lady can attempt to do, just like myself. I appreciate the video so much! Enjoy your day! Happy viewer here.
THANK YOU...this video was exactly what I needed. Repair made within 15 minutes after watching this video and purchasing replacement ball, springs and washers!
Thank you so much for posting that to TH-cam! I am still recovering from surgery, but needed to fix my dripping shower and I was directed to your TH-cam! I fixed it with the first try, praying and that helped! The part that I got at Home Depot wasn't a Delta, so I couldn't use it, but I put the old parts back in with their version of SlipNSlide(too sticky) but when I put it back together, no more dripping!! THANK YOU!!
Thank you, sir. I have changed 4-5 of these, but had never noticed the part of using the tool that looks like a "Y" to tighten the white plastic part that screws onto the dome! Of course, at my age, I might have forgotten what I did years ago! Thanks for the VERY GOOD lesson!
I know this video is 11 years old. But, I have this same valve. With the viewing of this video and the prepurchase of the needed parts I was able to repair my Delta faucet in about 15 minutes. The cautions against using too much force were well attended to. Also purchasing a silicone lube designed for faucet repair was a god sent. Once again TH-cam came through for a household repair that did not necessarily need a plumber. Thank you so much.
When he mentioned the tapered springs, he never mentioned which way the tapered end should go into the valve body. Do you know which way you put them in? Or did the kit even have tapered springs?
Generally curious.
I'm about to do the same job and was debating on using the lube but now I think I will use it since it's pretty cheap. What do you think would happen if it is not used.?
Same here! Before watching this video I thought I needed a “cartridge “ to fix mine. It was literally under $6 for the springs and seats at Lowe’s and done in 15 minutes. Only thing I did different was I squeezed lemon juice to soften the crud around my round cap first. Thank you !!
I am needing to do the same repair but don't know the model number for this type of valve. Do you happen to know it?
Wow! This little video just saved us $320. I saw my plumber at the hardware store and where we had taken the ball and cap to buy a replacement kit. My plumber told me that this wouldn’t fix our small drip from our shower head and he was going to come and take out a section of the wall and replace the entire unit. The hardware store didn’t have what I needed. However, I got home and ordered a kit and the plumbers grease from Amazon and m husband and I did the repair and the shower head is not longer leaking. The repair items cost me under $30! He told me it would be a $350 job! I will add that the dome didn’t want to come off Saturday. We did the tap with the wrench, still wasn’t moving so I soaked it in WD40 for about 15 minutes and it easily came off. Thanks for the information!
Helping 20 million viewers is the best thing I have done in my life. You are an example of the whole experience. Thank you for your part.
I'm experiencing the same exact issues. Thanks for sharing! Delta told me vinegar soak should work too. Hole in the wall sounded too extreme. Hope we have the same success!
@@virginiahoffman8897 I'm having to do this again and wondering if I could just clean up the one part and see if that solves it for now and was wondering what would be safe and effective. Vinegar it is!
Take out a section out of the wall!!!! hahahah. I had someone say the same thing...that there were no replacements to replace my leaky patio window and I had to tear out about 12 inches of wall and buy a larger size window to install! Why are handymen and skilled tradesmen so dishonest!!!!!
Here's a little tip that will keep many of you from twisting off the copper feed lines that he warned you about. Don't use channel lock pliers to remove the rounded cap. Use a pipe wrench instead, because when you use pliers you are squeezing the cap so tightly that the threads underneath are pressed so forcefully against the threads of the valve that you are effectively "locking" the cap in place. A pipe wrench does not squeeze, it only rotates and this is what is needed to remove the cap. I learned this only after trying large channel locks, penetrating oil, and even a torch, all with no success because of the channel lock pliers. Once I put a pipe wrench on the cap, it came off almost effortlessly. I hope the guy that made this video pins this comment to the top so everyone will see it and save themselves a lot of time and expense by not twisting off the three copper feed lines.
I wish I would have see this about 4 hours ago...I was gonna use a pipe wrench, but went for the channel locks instead. Now I have some fun ahead of me...thanks for the tip anyhow!
Makes a lot of sense - excellent point(s).
How about a strap wrench instead ? Might be better
I used the pipe wrench and still wouldn't move. Use the "tapping" technique. Put the pipe wrench on and the tap the pipe wrench with a small hammer or pair of vice grips. Took me 1/2 an hour of tapping but then it came right off!
How much would it cost to replace the cooper feed?
12 years laters I today used this video as a reference for repairing my 1962 delta faucet. Thanks for having exactly what I need for an old home that is going on the market with a 12 dollar fix.
I have a 62 model Delta shower faucet as well I have a question about the little spring loaded cups did you have a problem removing them if you're still out there please respond.
@@dwainsellers6453 Wow i was drawing a blank on this and noticed it was 10 months ago. I even sold my house since than. They were not hard to remove but make sure the drain is covered they fly and you dont want to lose. I think this is the video where they said save the old ones and yea the replacements didnt fit right the springs were all that mattered. I hope my memory is correct on this but be ready to catch the springs and make sure your water lines are off! I plead the 5th on maybe getting shot in the face by water from the manifold by not shutting off the main....Pretty sure it was my wifes fault :-). Good luck
What is the replacement part number please
@@MS-rl2qz I am sorry I have no idea since this post I sold my home and moved to another state. But if you go to lowes or home depot they have a section for tub and faucet parts. I think they had a small selection and I may of bought several to bring home and match. I cant recall if this is the video that suggested I reuse the original springs as replacement springs did not fit as well.
I fixed my leaky shower faucet today using this video. (I'm a 59-year-old woman.) I did it step by step, pausing the video along the way. Thank you so much! Saved myself money and increased my self-esteem!
Now days for a job like this is at least $325.00 or more with a plumbing company
Great instructional video. When I initially tried to remove the dome cap, I almost twisted the pipe but fortunately stopped before I did any damage. I called a plumber and was told it wouldn't be that much of a charge but when the plumber arrived and couldn't get the cap off, of course the initial quote wasn't even close. I was told by the plumber that there was no way of removing the dome cap and he would have to cut an access panel in my bedroom wall to get to the pipe behind the shower in order to cut it off and replace the faucet for the low low price of $700. Uh.... yeah right. Off to TH-cam I went and came across this video. I sprayed some PB Blaster on the dome nut 2 separate days just to let it soak in gave a couple of good taps just as the video shows and off came the dome cap. All I had to do was replace the two springs that had the rubber pieces on them which only cost me $1.98 at Lowe's. That's a big difference compared to $700. This shows that if you're willing to do your research and put in the work, you could pretty much fix almost anything yourself. Thanks for the video. It was most helpful.
I just had the same problem, a friend who is a plumber couldn't get the dome off. He said we have to go in from the back and change the whole valve. He also recommended getting an access panel for where we make the hole in the back to get to the valve.
Well, that's absurd. If it comes to that and the bonnet nut just won't budge you can always just carefully cut it with a dremel tool. U can't be serious, u can get a replacement for under $10 on amazon.
WD 40 helped remove the dome about an hour after I sprayed it in the backside.
Kid Ace c
Kid Ace non
Great news! After watching your thorough explanation, I fixed my leaking faucet. Thank You!!! This is best feeling ever. I feel so empowered, Thank You.
Thanks! 13 years later, you not only saved us money, you also saved us from having to wait for the plumber. Our Ace Hardware had everything we needed. I hope you still read these comments to see how much good you did over the years by posting this!
Thanks for the great video, your instructions were perfectly documented and the disassembly went smoothly. Once I had all the parts removed I had to clean the internal minerals off the inside with white vinegar and baking soda (took hours for it to work, next time I'll buy a chemical to do the work). FYI, I was able to use the Danco Repair Kit #86971 for Delta with the #212 Stainless steel ball it cost around $12-$13, the kit came with everything to rebuild without the adjustment tool in the video. To get the tool there was another kit for around $18 at Lowe's but it had the wrong ball so I took a chance that the ball tension would be good and it worked out well. Thanks again for a very well done video!
Thank you for your video post. I am familiar with this repair, but my son is not. He was able to successfully complete the repair after watching your video and with my help along the way. Saved him lots of lost water and a plumbing bill on a Sunday just before Memorial Day. Well done.
I'm so appreciative of this video; I wouldn't of had a clue without it!
My experience: my 1970's Delta shower valve hot water stopped flowing so I disassembled it to clear the obstruction. After reassembly it leaked. I tried to get by with just a set of new springs and seals (Delta RP4993G $5) because the ball and socket still looked good and were smooth. However, it still leaked. Due to water flowing into the wall when in use I became frustrated and stopped using the shower for a year! Eventually I attempted to resolve the issue so I purchased a complete rebuild kit (Delta RP77739A $24 at Home Depot) and it worked perfectly! The springs and seals kit probably would have worked fine for newer valves, but not for my old valve. I just thought that I'd share my experience for other DIY'ers dealing with this.
Otto,
Just read your comment- kinda backs up my experience. There may be some subtle details in the Delta parts that really make a difference, like a Stradivarius
Thanks to your comment I found the right part I needed. I just couldn't figure out why the part I had seemed to not fit properly and gave up for months thought I'd give it another try and seen your comment and it worked thanks soooooo much!!!!
Watched this 12 years after it was posted and it saved my butt. That part about making sure not to twist off the tubes coming out of the part in the wall was worth its weight in gold. With that tip in mind, I proceeded with caution. Sure enough, I can't get front dome off because it is frozen on solid. I am going to call a plumber to install the repair kit I already have on hand. THANKS!
Vanessa from Canada just wanted to let you know the video worked like a charm. The whole thing started this morning when we could not turn the shower/bath off.. the water kept running. I turned off the water into the house. Before starting to prevent a flood through the ceiling into the basement. Important for those that know nothing about plumbing or leaks. I took the shower head apart then stopped to look to see if I could get help on line. Your video instructions/details were perfect. I would not have known about the washer/springs inside. I used a screwdriver and got it out without any hassle. Tapping the valve thing.. came off like a charm. I cleaned off the copper valve and used some plumber grease was still good so it did not have to be replaced. It was the up graded one.. like yours in the video.. I followed your instructions to a T. Thank you helped me out a lot cost me $10 for the parts I bought the kit. Could have just used the springs and new washers for $3 but decided to buy the kit and just replace the plastic parts to be on the safe side. Things are tight and I could not afford a plumber. P.S. Was much easier to fix than the toilet :D
Hi Vanessa, im also in Canada and have the same Delta faucet, and it leaks when you shut it off...unless you put it to Hot or Cold. But when left in the middle, it leaks.
Where did you purchase the kit?
I went to Home Depot, Lowes, Rona, and no luck!
Thank you
splash Splash, also in Canada and I'm very interested to hear this answer. I'm looking at Lowes and it doesn't show that ball valve, which I think seems to be the key for the repair.
@@jillianvash1989
So i went to a place called Plumbing Plus
I bought the 2 seats and springs, and a new cam(white plastic cup) and bushing. I installed today and it worked like a charm!
I reused the steel ball. No issues
splash Awesome. I'll keep this in mind. I've checked more of the comments here and I'm seeing references to a Home Depot sku (US). But I searched Home Depot Canada and saw a repair kit with a picture of the same handle as I have and the repair kit looks just like the HD US kit. I'm leaning there. The big issue is my plumber says the screw to unscrew to get to the rest of the juicy stuff is rusty and he is doubting he can get it off. I have to find a way to get that screw off.
@@jillianvash1989
Just an idea, but maybe soak it in penetrating oil for a day or 2 before trying to remove the screw...
Might be worth a try as to not break anything.
Hopefully it goes well for you!
I'll add my voice to the choir of happy DIYers below. Thanks for the great details, they were exactly what I needed. The only thing I did differently is that it was a bear to push against the springs to get the bonnet nut back on, so I used a 5/8" socket over the post and it distributed pressure evenly while compressing the assembly and springs. I was also glad my local ACE hardware had all the parts, including the little two tab adjustment wrench. What a ripple effect this video has had! Nearly 4 million views! Thanks again Ramon.
Thank you (x1000)! I was intimidated to attempt this repair but your video gave me the confidence to give it a try. It took about 45 minutes from start to finish to repair my shower valve and saved me a ton of money. Thank you for providing a well-produced, easy-to-understand video!
Your video explained this so well that I, a 60 yr old woman, was able to change out the shower cartridge and repair my own shower. You saved me a few hundred dollars. Thank you very much.
After being told by two plumbing parts shops that it cannot be done yourself, you need special tools, and it will take five and a half hours, and I called a plumber for tomorrow who wanted $175 per hour, I stumbled across this video. Got the parts. The fix itself, while starting and stopping the video, took about 45 minutes. No more leak. Thank you.
Assholes are always trying to rip people off.
This was the best video for fixing my faucet/shower by Delta,but cost me $18 to fix what the plumber told me was minimum $150. Really want to thank you!
This was great and absolutely helped us fix our 30 year old shower faucet. The presenter was helpful and knowledgeable, the camera work perfect and it allowed us to understand step by step what we needed to do. thanks again.
Just followed your instructions and it worked perfectly to stop my leaking shower. I had to use PB Blaster on the dome cap. Sprayed it and just let it sit for about an hour. Went back and it popped loose. The rest was easy. Fixed it for a grand total of about $10.00. Thank you.
Greg, thanks so much for this well paced, well organized and detailed video. Moved into 30+ year old house last year and this faucet drip was the latest issue. Clearly not replaced since house built this faucet is unique by today's standards so not just any generic leaky faucet video would do.
Just managed to complete this repair thanks to this video and the advice in the comments! I had trouble getting the cap off but I noticed the whole thing was turning so I stopped right away--heeding all the warnings about twisting off the copper lines. I started tapping at the cap and poured a kettle of boiling water on it and it loosened up nicely. Then it turned out that the replacement ball wouldn't work with my handle because it doesn't have a screw hole, so I just used the original ball with a bit of the silicon gel on it. Although the handle isn't quite centered anymore (see above), I didn't want to try twisting it back in the other direction and risk doing further damage. It works smoothly in any case, and there's no more leak! Thank you for this tutorial and to everyone who shared their tips and experiences to get me through this.
Thanks so much, Greg! Just got it done successfully with NO LEAKS :) -- by luck and the grace of God, the dome came right off. Watched your video a few times before starting, then kept it on through every step with my iPhone. You're an outstanding coach!
Perfect video - helped me solve my issue with the utmost efficiency and care.
I have no doubt in my mind this video just saved me a couple hundred dollars. My Delta shower faucet has been dripping for a while, as has the Delta sink faucet in the same bathroom. I repaired the sink faucet first and that was easy. The shower has a push-pin diverter which also leaked, so I replaced it too. The shower dome was stubborn, and it took some WD-40 and patience, but it too opened up without damage to the faucet. Just need to recauld the shower faucet now. Thank you VERY much.
I utilized your video today on my Delta. Mine was exactly as pictured. I bought a complete rebuild kit for $18.00 and the drip/leak is now fixed. Thanks for a very well detailed, patient and professional video. I am definitely now a fan and subscriber.
13 year old video helping me out today. Been having a leaking shower head since I moved in and decided to pull it apart. I have a plastic shower ball too so it also leaks from the handle. All the newer videos show plastic shower valves you replace but this is the style my home has. Copper with a plastic ball. Also I didnt see any springs when I pulled mine out, go figure. I'll check again but I wouldn't be surprised. Half the plumbing in this house was done by a hack job. Thank you 13 years later!
Thanks so much for this great tutorial. I just saved my Dad some big bucks by knocking this out myself. I doubt I could have accomplished it with as much ease had I not had this video for reference.
Heck, I was even able to sound like I knew what I was talking about with the True Value employee who helped me find the kit! THANKS SO MUCH, Ramonas Plumber!!
Thank You so much for the video! Just fixed my Delta shower Thanks to Gregs excellent video. Checked several videos but because this model is getting old now all I saw was the cartridge replacement types. Then I saw Greg's video & it matched what I had! Whipee! Then I got a call from a Plumber I had called & he told me he was to busy & I'd have to wait. He also said I could call other plumbers if I want it done this weekend but they would charge me time & a half. I said Thanks for the Info, got in my car, went to Hardware store, got a $5 Delta Seat & spring kit, came home, replaced only the seats [Used original springs], & LEAK FIXED!
Glad to help, together we can thrive.
You sir are an awesome teacher. This was so informative. You have the same voice of the man that did the educational films (on a reel) back in the day. Remember those? That’s a compliment. Thanks for sharing 😊
That's the voice I was trying to remember. I was watching this and told my friend, "this is like something on PBS. In a good way." 😄
I had no idea how to fix the shower leak until I saw your video! The video has my same Delta know so I watched and then went to HD and bought parts, watched the video again and then fixed the shower exactly as showed. Thank you very much for taking the time to make the video!
Thanks! after a week of soaking the thing in vinegar I finally got it
apart without ruining anything. Im glad you noted that in the video or I
for sure would have broken the pipes.
Great video, pretty easy fix. The first step you need to do is call Delta and talk to customer service. Delta has a lifetime warranty on all faucets. They will send you the replacement cartridge for free, a$60-$75 value. Just talked with them today while dealing with a leaky shower that was installed 24 years ago. Was on the phone for 5 minutes and they are shipping me a new cartridge today!
Thank you so much for this video. It was exactly what we needed to do our repair. It was easy and cost less than $17 total for the repair kit (Delta #212), the silicone grease, and tax.
If anyone is curious, with inflation the price of this including silicone went up to $32 as of April 2022
@@DirtyDirtbath price of this kit and silicone is now $34.74 at home depot including tax. crazy times we live in
Great video. I never would have attempted to fix my shower without first seeing this. My original Delta fixture was circa 1991 and the stainless steel ball had a plastic sexagon shaped fitting attached that fit inside the exterior round handle. I couldn't find any replacement even on the Delta website. But after reading some of ramonas replies to comments, I just cleaned and greased up the original steel ball which was still in good shape, and installed a set of Danco 86968 seats and springs, that matched exactly with my originals. I picked them up at Home Depot along with a small cup of Danco Silicone Grease. Total cost was about $11. Following the video it took about an hour to fix my dripping shower that I had been living with for a year and was getting worse. The shower handle now works much smoother too. Thanks so much for this video and info.
This was great help,my house was built in 1986 also and the shower has been leaking for years. Did it all myself. 2015
Greg Hale what was the part number
I've fixed mine today, the toughest part was to turn off the dome cap. Sprayed PB plaster on, and left it overnight, the next morning it came off as soon as I twisted it. Only changed the springs and washers. It cost me a total of $4.50. Thank you so much for your video.
For that special tool to get the spring thing out - a crochet hook works great! Better than the phillips screw driver - it even looks like the tool! It took me a while to get the dome cap off - I used WD 40 to loosen it over night and then tapped a lot - that helped (along with prayer! :) After that - easy peasy! Thanks for the great video!
Thats a good tip! Mine came out fine with a screw driver but good to know if I ever need to do this again.
how did you apply WD 40? not sure how to get the stuff into the dome? mine is not turning!
Excellent instructions. My Delta valve only says 1962 and US Patent 3056418 so wasn't sure which parts to order. However, thanks to another sleuth, he confirmed the seats RP4993 and steel ball RP212 were the right ones. I used a full repair kit RP77739 which includes the right seats and steel ball (I used my old steel ball) and new plastic cam with rubber packing. Works like new! (My domed nut is only hand tight and works perfectly that way). By the way, my valve had the longer springs but the new shorter springs had a wider taper so I figured they were a design mod, tried them (they work with the special tool) and everything works perfectly. I have a new set of longer springs as backup just in case.
Great video! I used the tap method on my dome. It had been on for 31 years. I kept a slight pressure on the pliers while tapping the dome with a plastic mallet. I also kept moving my grip point around to be able to tap the dome all of the way around. I also took off the whole back cover on mine to reseal it, and found hot and cold valves that had flat blade screwdriver shutoffs, which allowed me to get parts and leave the water on in the rest of the house.
I know it was posted previously, but this video and a little common sense saved me. *** Please note the the cam in his right hand at 6:45 in the video. My cam and the black seal was not already together. I had to assemble it. It caught me because I was so focused on replying the video in my mind. Nothing that turning the water off, fixing and then turning back on. Thank you for posting this.
If I may add a tidbit of information to an already excellent video for those folks who might live in a condo where there is no means to turn off the main water supply by yourself. I have learned, you may have the type of shower valve that enables you to turn off the water to the shower right at the shower valve. To find out, remove the knob and the backing plate to expose the valve. On each side of the valve is a screw. Turn each screw clockwise just enough till both the hot and cold water shuts off. Then you can work on rebuilding the valve.
My shower valve is as shown in this video and does NOT have hot or cold shutoff/adjustment screws at the sides of the valve.
Thanks for the info on condo valves. I was sure I had to turn off the whole building until I read your comment - you saved me calling in a plumber and sending ut notices to everyone to turn off the water.
This is one of the best "How to Videos" I have seen on here. Very helpful. I would not have figured out the springs, or even knew they were there without it. One trip to Lowes, and following the steps in your video, and BAM, fixed in less than 20 minutes. If I lived in Ramona, I know who would get all of my plumbing business. Thanks!!
Thanks you for posting this you saved me a lot of money
I just saved $300.00!!!!! The chrome collar was stuck and I mean stuck...tried many times in the past to loosen it. I just tapped all over it, soaked it down and tried an hour later, and it came off with channel locks. Replaced the seals and no more drips. Thanks!
after replacing the Ball valve , seats and springs, the drip got worse... so I put the old seats and springs in with the new ball valve, and no more dripping. just a tip if y'all have the same issue.
Just used the delta repair kit from home depot and had a hard time getting the chrome dome (that made me chuckle) easily screwed on. Took lots of pressure to push the cam/black washer back far enough to get the cam tab to lock in place. Then it took a lot of tightening to get the dome fully threaded on so that the chrome spacer (that the dome butts up against) didn't have any play in it. Attached the handle, leak is gone but handle movement is notchy up/down and side to side. I used silicone grease and the correct size cups/springs were installed properly. Only thing I can figure is that the new springs are pushing the black rubber cups slightly into the ball openings. Maybe they will wear some over time. But I'm keeping my old springs just in case. Just an fyi for others.
This was a terrific video. It is 11 years old, has been watched 3.3 million times. That says it all!
Great! if you tipped the restaurant server, then tip the plumber for same reason. Altho I very much value comments and read every one and have even brag to friends that I have helped so many, I too love money! Actually the water saving is another thrill for me, but ...
Thanks in any case. Greg
I see I wrote a comment 8 month ago. I actually got the outer nut to finally break loose, and referred to this video twice and now I no longer have a leaky shower. Thanks again, and I hope others aren't as intimidated as I was on this job! Thanks!
Great video but Sydney's explanation of the positions of the seals and springs was key for me (my old seals were so chewed up - it was hard to figure out). Many thanks
Thanks! Great video! There are a lot of small variants to this depending on the kit and the shower faucet. However, follow all the directions including the cheap grease. He doesn't say it but when you put it together, first use, the black valve seats you install may get damaged with just metal to rubber rubbing. The grease allows the rubbing until the surfaces are worn in. I thought, don't need grease it'll just wash away, but use the grease! Also, I did have to use more force but I almost gave up and called a plumber. I tapped and went both ways on the cover with more force than I like but did not damage the hidden piping. The Phillips works good to make sure you don't drop the spring or the black rubber valve seat. They push in and pull out easy. Get a kit with the wrench as I used it to adjust the existing bonnet tighting ring. I am having some major plumbing done later today I can't do, so I did this when plumbers will be handy later. If I messed it up bad enough, it could cause the water to the whole house to have to remain off. So, if you are worried, plan for a plumber who can arrive quickly.
Video was supremely helpful!
After finally finding the right kit with the correct springs and caps, I was able to perform this procedure easily.
I have two questions.
1) I can't seem to find the silicone product you mentioned in the video. I don't see a link on your DIY site and couldn't find it searching the web either.
2)After installing the repair kit, i still have a slow leak at the tub faucet. It is especially concerning because it is warm water which is leaking. Does the silicone make a difference in that regard? Are my caps not seated properly on the ball maybe? I did not have an adjustment ring on my fixture. The dome was the only thing that held the cam in place and tightened it down.
Feedback would be appreciated!
Quick thank you & comment; Water pressure to my shower and bath was slowly diminishing - particularly the hot water. I screwed around with it over a few years with no improvement. I looked at the faucet parts but nothing seemed to be wrong. After watching this video, I took a chance and bought a kit online and then replaced everything as shown. It works great now. Pressure's good, lots of hot water. I don't know why this worked but it did.
Likely there was debris in the valve body that was dislodged when you took it apart. Glad you have good flow...!
What do I do if I did twist the internal components when unscrewing the dome nut? Is there an easy way to get them properly realigned or do I simply twist until straight?
I just did the same thing. The pipes are twisted but not leaking. I replaced the washers and spring. All good. The issue is that instead of the knob lined up to 12:00, it is now pointing at 10:00. Can you twist these back? If not, where do you get another one of these shower valves or do you just start over with a new modern one?
jimmy ashworth I did the same crap!!! Twisted the 3 mini copper lines(the ones he showed cracked) connecting to the water line. My 3 mini lines came off.
You're the man Greg! Your video will save us hundreds of gallons of water.
I get complements all the time on how well I am kicking up the image of the Plumber...helping homeowners save water.
Did I miss the part after shutting off the water to the house where you have to drain all the lines? What about shutting off the water coming from the water heater?
@@cmdoggy24 The water heater is supplied by the house cold water. While water can still be in the pipes, it is finite. If a circ pump exists that needs to be turned off. If a two story building more will drain out. Different piping arrangments exist, but I reply to a common layout.
I watched this video the 1st time 4 years ago. Now I have to replace the rubber cups again and I watched a different video. BIG MISTAKE! It never mentioned the little tool you need to tighten the plastic ring around the dome. Thank you Mr. Ramon, I'll never watch someone else's plumbing video ever again! ☺
I value actually helping people, thanks for the feedback...
What is the part number for this repair kit?
Thanks, Joe
RP77739 is the whole set. you can just buy the spring and rubber seats RP4993 if your ball, seals and cam don't have any problems.
Beware, there are many similar looking Delta shower set ups like this. The PN recommended by above poster may not be what you need.
Danco 86971 Repair Kit for Delta with Number 212 SS Ball
Excellent video. Perfect job explaining things as you go. I had a 40 year old tub faucet just like this one that was leaking. Was able to find the parts at Home Cheapo. Watched this video about 4 times before I started the project. If you follow his instructions closely it works great.. Had to rebuild a Delta kitchen faucet about a year ago and it was a real PIA. It had the tapered springs and seats and it literally took me two hours to get the springs and seats in. This shower valve was not near as hard. FYI , if your valve and parts look just like the one in this video, you need a kit for the 212 stainless steel ball. It is very common and most plumbing supply and big box stores have them.
I DID IT, I DID IT, I DID IT! Only took five months to get up the courage, lol.
Me, too.
Two trips to Ace and the water shut off valve was covered up with dirt, but we got both showers done, and boy howdy they work perfectly now. Yahoo!
Great, see, you can do it, and I can help!
greg chick Yes you surely did help, thank you so much. Now looking for my next project. Actually, my sister owns the house and did the work, but I showed her your video and “supervised.”. Lol
It took me 8 months! 😊
No wonder there are over 2 million views! Just completed this repair. Thank you for this.
Wanted to also share the Amazon link to the repair kit I used: Delta Faucet RP77739 Repair Kit www.amazon.com/dp/B00LCUJ9PY/ref=cm_sw_r_cp_api_i_8DU0Eb9GQSNV8
I like to help, it makes me feel successful when others are. Glad to help..
WARNING! On older models (circa 1998), if the cap ring that holds the valve in place does not come loose easily, DO NOT EXERT FORCE in an attempt to break it free. Doing so can result in your twisting the entire internal faucet structure, destroying it beyond repair. Trust me. I did just that and turned what should have been a $40 easy home fix into a $500 two-plumber job. The plumbers said they knew of this problem, and whenever they discover a frozen cap ring, they immediately go to the hack saw to cut the ring off. Replacing the ring and the valve is better that replacing the entire faucet.
rotary tool with a cutting wheel, two cuts on both sides, stick a flat head screwdriver and pry apart the 2 halves.
awesome video, good enough for an older woman who doesn't know anything about plumbing, can fix her shower. Great teacher!!!
Great Video!!! I'm not able to get the dome unscrewed. ITS ON THERE!! Any idea how to get one of these suckers off there without twisting the pipe?
I'm having the same problem and tapping on it does not help!!
Frances Roell how did you get it to come off?
My brother got it off for me.
u can try pb blaster or a heat gun works well too.
Yes try a heat gun
Great instructional video, with good lighting and clear explanations for every step. I'm a food salesperson by trade and not an all-in DIY guy. The whole repair took about 10 minutes, with some of that time spent walking back and forth to the street to turn off the water main to the house. Thanks!!!
Thank you, That is my intent, to be clear, easy to follow and make sure you have all you need to succeed as a DIY person.
I just wish more people in the world communicated and cared as much as we do!. Your thanks are why I do these things...
major issue with getting the cap off. Home depot does not sell replacement delta shower cap only kitchen faucet. The associate said she never heard of someone having a problem with it. HA! I put it back together and hope my wd 40 and blast off make a difference over time. Not sure if I damaged it at this point. There needs to be a plan B, C, and D, in this video for this problem. I'm looking at calling a plumber - what else canI do?
Same delta dome for either!
A DECESARIS
+A DECESARIS ----calling a plumber would cost money...how much I would not know. I am having the same problem, and I do not know what to do. Any suggestion?
HOME DEPOT
Store SKU #510240
Joy Swancy l
I have this exact shower valve (which I know is old) but this video was the perfect tutorial for replacing it! Greg does a great job of explaining what to do in a no-nonsense manner with good quality video. Thanks so much!
great TH-camz vid... very VERY true, do NOT force the dome, that calcium will hold the threads...tape it or squirt CLR around it... But, He didn't say anything about the Delta too in the beginning...What frick is Delta tool
I believe the two tools are: "Delta Faucet RP23489 Plumber's Hook" and ""Delta Faucet RP1974 Wrench". Buying both with my renovation kits (a few extra bucks). Will let you know if these aren't it.
it comes in the repair pack at the hardware store. its the little tool he was using to set the tension on the spring.
A gigantic thank you for your video. The shower head was still dripping intermittently after I replaced all internal parts. Then you pointed out that you need to adjust the outer plastic washer to put just enough pressure on the "ball" to make the stem handle move up and down smoothly bit not too loose or too tight. That was the problem and I fixed it without buying anymore parts. And the handle is no longer woobly! Two thumbs up!
I got my replacement kit from HD. When I tried to push my gasket/spring back into the holes they did not sit flush like the old gasket/spring did. They stuck way out, and that's with the smallest spring and gasket. Any ideas?
Same problem here. I had to line up the plastic washer with the faucet body, then used a screwdriver to push it and hold it in the slot while I turned the nut to tighten it down. It worked but had me bit worried.
Mr Skyler is correct! The springs and cups that are at the 1:00, and the 11:00 positions stick way out. I used the exact same springs that were in the unit. The designers of this unit should have had the cups at the 5:00 and the 7:00 positions so that gravity would have at least helped a little bit, instead, gravity hindered the process making it a real pain in the arse. I did this repair about 15 years ago for the same faucet and DO NOT remember having this amount of hassals getting the cups to stay in their place while trying to insert the ball.
@@Biofan813 Sounds like you had trouble with the locking ring and washer outside the valve - the other commenters are talking about the spring-loaded gaskets INSIDE the valve.
@@nouveau53 Same thing with me!! What a hassle and I ended up not putting the cups over the springs. I don't think that it's going to work because its still leaking and I'm afraid to turn on the water!!
@@nouveau53 What did you do to overcome the cups and springs sticking out? I don't want to call a plumber! Too bad that I tried to fix the damned thing without turning off the water at the road, but I tried and tried but it was too tight!! Ended up calling 911 that put me in touch with the fire dept that came and turned it off for me. The gushing water pushed the old springs and cups out of their places and down the drain.
WOW! I remember you. We live in Texas now, but lived in Ramona from 1998-2016. Nice to see you on YT, Greg !
127 rip off plumbers disliked this video lol
LOL
5yrs later. This is still a great institutional video. Thank you for the information
this video is useless without any volume...!!
Wow! Thank you so much Greg! I did it! No more leaky tub faucet. It has been driving me crazy for weeks. I knew that my plumber was going to charge me at least $150+ for the job (as he has done it once before). For about $5.00 I did it on my own with your help. The video was exactly what I needed and no problems! I almost can't wait for another plumbing issue, so that I can come back and get more help from you! Well, maybe I can.... ;). Thanks again!
Thank you for watching...if you saved a lot, the Tip Jar on our DIYplumbing advice .com site accepts Visa.....
Thank you, Thank you!!! I did it, my son and his friend cheered for me LOL, It has been a trickle for a while and was making my water bill high, then last night after I called myself trying to fix it, a full blown gush, had to turn the water off, went to Lowes today and watched your video a few times, I can't believe I did it!!!!!
DIY ers are legally justified in doing their own lite level repairs. These people sometimes opt to not do a repair themselves and say wow I had no idea it was all that involved. I am not suggesting they do all jobs. I am allowing them to save water in a tough economic time. Saving water is more important. I recommend calling a pro. If you read the hundreds of comments you will learn something.
I as well spend many hours a week supporting the Plumbing industry in many ways, do you?
And 8 years later, your video was a life saver again
It worked until I was able to pick up the supplies this morning at Orchard Supply. Had to reuse the ball; the new one was pretty sad, with rough edges that would have worn things out. No biggie; it was the seals that I needed. The toughest part was pushing things back into place because the spring pressure was much greater than I expected and had to make sure the key was still lining up. But it all works now. Thanks for the help!
THANK YOU THANK THANK YOU! My brother and I just did this and fixed my leaking faucet/shower. Dude, you are awesome, I have subscribed to your channel and look forward to learning more! I'm excited because I didn't need an expensive plumber! It was DIY EASY. Thank you for your clear instructional video step by step you are the MAN! Anyone worried about doing this, trust me it's EASY just listen, watch closely and DIY it's easy!
Thank you for making this video I did what you stated in your video and I was successful. Please keep making videos because there are a lot of people making plumbing videos and have no idea what they are doing. I had to dig to find your video but it was worth it because you helped me save money.
This is the CORRECT and complete instruction on using all of the parts and tools including the odd U-Y shaped “wrench” that comes in the Delta faucet service kit. Dave yourself time and get the kit the includes the ball control like he shows and DONT forget the food safe silicone lubricant sold separately for about $5. 35 yr fixture operates super smoothly and easily now with no drips following THIS video after a few fails with other instructs. Well done!
Thanks a million! Between our unit and the rental unit next door, we have four of these Delta shower control heads. The addition of this video has really made my day after viewing Sea Foam video and buying it and tuning up my Nissan Frontier my weekend is complete. So concise and important information.
I can't thank you enough, had no problem using a screwdriver getting the seals out- Only think I had problems with was the chrome dome- pliers taps as per your trick, and it came off after 32 years. Looking forward to sleeping tonight without the drip ;) ~~~ Can't believe I am such a procrastinator and waited 3 years to do this- after I bought the parts! I am now searching for motivational speaker videos on youtube.
Thank you so much for the excellent video and helpful comments. Two plumbers insisted that they'd have to cut through the wall to replace the shower valve because the dome was stuck, but with some tapping and a small gas "plumber's torch" from Lowes (I put it on its lowest setting, and then applied the tip of the flame directly to the dome for 30 seconds, as you mentioned) I was eventually (I heated it twice) able to unscrew the thing. One thing that wasn't completely clear to me: the ball needs to be inserted so that the two "eyes" are above middle (on the ball from the Delta kit, this meant that a little notch on the lever was facing downwards). In any case, thanks again - I would have never tried this myself without this video.
Thanks much for this helpful video. I was totally unaware that this job was as simple as a kitchen faucet drip repair. I thought this was a job only for the pros. You saved me a call to the plumber which means you saved me at least a hundred bucks. I do appreciate that help!
2:40 was exactly what I needed!
Handle had mold growing in it and I was unsure how to take it off to clean it.
Looks so much better!
Thanks!
Can't thank you enough for this video. We actually had a successful plumbing project for a change. Our dome removal was a lot more difficult than yours but it finally came off. The most challenging part of the project was finding the replacement parts. We got the dome and handle replacements at one chain hardware store and the internal parts at another but that beats paying for a plumber to come out and do such an easy repair. Not that we don't love plumbers :-).
Your video included details I did not find elsewhere that were highly useful. I am so glad I came across it. Excellent information and presentation. Thank You!
Your procedures in the video are spot on. Thanks for posting it up. I grabbed a rebuild kit from ACE hardware and forgot the silicone. I ended up using dielectric grease as a substitute on the seats and ball before installing. The grease definitely helped assembly and probably helped the life of the rubber in the kit. Thanks for a straightforward explanation. Took about ~20min and $16.
Thank you for this. I had your video on my phone while I did my repair, watching you every step of the way!
Excellent How To video. I just wrapped up the repair, a repair I would not have had the confidence to attempt. A great tip on the cap ring. Mine was really on there. A few knocks with the pliers and then some thumps and off it came.
Thanks again.
Thank you so much for this video. We needed a new ball assembly since the old ball was all chewed up at the part that connects to the handle. So we bought a replacement kit. The instructions that came with it were not detailed enough, and it took me about 3 hours of struggling with this thing until I watched your video. At one point I had it back together but the handle was in the up position to shut it off. Another thing that happened was that the water came out great but it wouldn't shut off no matter how I turned the handle. Finally, I had it together and the water back on when I discovered a leak so I unscrewed the part that holds the ball in place and we had a gusher. In fact, both the seals & springs blew out. I only found one, so I thought it went in that bottom hole (the hole you said not to worry about), and I couldn't figure out why it was still leaking when I got it all back together. After watching your video and realizing there were two seals, I went looking for the second seal/spring assembly & found it right where I had put it, on the side of the tub. I put the seals & springs back in, tightened the other part just like you explained, tightened down the plastic piece on the outside, and all works great now. Thank you so much!!!
Fantastic video presenting knowledgeable information for the old Delta shower faucet leakage repair. It helps an ordinary people to save a lot of money in hiring a professional or in the potential rebuilding of the walls for a successful repair. Thanks a lot!
DIY seems to be a National interest!, Thanks for the comment.
Thanks so much! Your clear and easy to follow instructions helped me fix the leaking shower faucet in about 15 minutes. I really appreciate you taking the time to put together this repair video. Cheers.
Tom, Glad to help, thanks for the kind comment..
Really appreciate the video. I was able to repair the leak myself. Saved me lots of money. THANK YOU.
I have been thanked by the blessed, thank you!, all we can do is make the world a better place one leak at a time..
Not exactly perfect explanation on how to put the ball piece back in there position wise. Took me three tries until I got it back in there with no leaks (my bad, just keep trying). I am really thankful for this video and you saved us $200, which is what the plumber was going to charge to fix the leak. I noticed as soon as I pulled off the ball, the spring on the cold side was flat and had no give to it. So there lied the problem and I had faith that Delta sending me (for free) the seats and springs was going to work. We have a 20 year old faucet and we aren’t the original owners of the house, but they still sent them out as a courtesy. I used the pipe wrench method like someone else had mentioned in the comments and it came right off, no issues. This is something any lady can attempt to do, just like myself. I appreciate the video so much! Enjoy your day! Happy viewer here.
THANK YOU...this video was exactly what I needed. Repair made within 15 minutes after watching this video and purchasing replacement ball, springs and washers!
Thank you so much for posting that to TH-cam! I am still recovering from surgery, but needed to fix my dripping shower and I was directed to your TH-cam! I fixed it with the first try, praying and that helped! The part that I got at Home Depot wasn't a Delta, so I couldn't use it, but I put the old parts back in with their version of SlipNSlide(too sticky) but when I put it back together, no more dripping!! THANK YOU!!
Thank you, sir. I have changed 4-5 of these, but had never noticed the part of using the tool that looks like a "Y" to tighten the white plastic part that screws onto the dome! Of course, at my age, I might have forgotten what I did years ago! Thanks for the VERY GOOD lesson!
I too have forgotten things I once knew from not doing them. "Use it or lose it" as they say. Glad to be of help.