How to replace the rear brake pads on the Ford Kuga 2013 to 2020
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- Do you need to replace the rear brake pads on the Ford Kuga 2013 to 2020 but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Ford Kuga 2013 to 2020 manual covers petrol and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-...
What's covered:
Safety First!
Roadside repairs
Chapter 1 : Routine maintenance and servicing
Chapter 2 : Engine repair, removal and overhaul
Chapter 3 : Cooling, heating and ventilation systems
Chapter 4 : Fuel and exhaust systems
Chapter 5 : Starting and charging systems
Chapter 6 : Engine and emission control systems
Chapter 7 : Manual and Automatic transmission
Chapter 8 : Clutch
Chapter 9 : Braking system
Chapter 10 : Suspension and steering
Chapter 11 : Bodywork and fittings
Chapter 12 : Body electrical system
Wiring diagrams
Reference
What's covered:
Petrol SUV 'Mark 2' with 2WD & 4WD
Ford Kuga 1.5 litre 1499cc (2013 - Feb 2020)
Diesel SUV 'Mark 2' with 2WD & 4WD
Ford Kuga 1.5 litre 1499cc (2013 - Feb 2020)
Ford Kuga 2.0 litre 1499cc (2013 - Feb 2020)
Excellent video but no mention clean regrease guide pins. I always regrease with high temp wheel bearing grease. If pins dry can make caliper hard operation and even sieze up.
Thanks for posting this!
I always wonder though, if someone needs step by step instructions on how to open the bonnet, should they really be encouraged to work on vehicle brakes?
Nice and clear explanation for the novice but ( nit picking now ) you forgot to mention to unscrew the cap on the fluid reservoir and leave it resting in place so when you wind back pistons the fluid has somewhere to go !!!!
Do you really need to have a special tool to back off the piston? On other cars there’s just an Allen screw you can back off behind the piston.
Hy.after change the pads you need to do brake fluid venting?
If you haven't disturbed the hydraulic system, there should be no need. Just check the fluid level in the reservoir.
Morning I have a Ford Edge 2016 with a EPB, I cannot get my car to go into maintenance mode, what am I doing wrong
Are you starting the EPB service mode with the brake in the off position, the instructions don't tell you to do this, so EPB off throttle to the floor hold switch down cycle the ign
switch as it says and brake will be off
Excelente explicación y video