Kawasaki KRX 1000 Center Caps Keep Falling Out? Our Cheap Durable Solution!
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2024
- IMPORTANT PLEASE READ This is a cheap awesome replacement for your loose KRX center caps! This will work with stock wheels in the back BUT ONLY WITH WHEEL SPACERS! The rear axle nut sticks out pretty far so these will not clear it without modification or wheel spacers. I recommend wheel spacers for stability so this should not deter you. Note: the front do not need spacers to fit these but I still recommend spacers.
Link to Our Website! See what we’re up to and buy the best gear all in one place!! rebelsoffroad.com/
Link to our Rebelsoffroad official FB page! (find out about events and upcoming videos!) / rebelsoffroad4x4s
As always please like, comment, share, subscribe, talk about us to your friends, write us an email, send us your favorite sticker, cashapp us, do the hokey pokey, buy some merch and name your dog after us (or whatever the bigtime youtubers say after each video...)
These videos would not be possible without you so
THANK YOU FOR WATCHING!!!!
what I film with:
amzn.to/3ZT5sIN
amzn.to/45gEE69
Mounts: amzn.to/3rxYNqC
what I edit with: lwks.com/
As an Amazon associate I earn for qualifying purchases. There is absolutely no additional cost to you! All products I recommend are used by me personally or are featured in my videos. I only recommend the best products bases on my research! All earnings go right back into the channel but I only earn if you use the link so please consider using the links provided. Thanks!
The best Offroad Kawasaki Teryx KRX Brute force Polaris RzR Canam Maverick X3 Outlander 1000 Honda Talon content - ยานยนต์และพาหนะ
Have used this for a year now on two machines. I bought them in black. You must have wheel spacers. We have not lost one yet and we have been up and down red and black trails. Thanks for video, hope it helps some people out. Easy on the wallet looks good, and it lasts.
Thank you and Nate for the tip! This was a great idea. Good point about the spacers
I bought my machine used when I went to take my wheels off to put my megabytes on I had a heck of a time getting the wheel off after all the lugs were removed. Turns out the previous owner silicone the caps on I swear he used a tube of silicone on each cap it was. They were so full of silicon it was tough to get off. I had to take a razor knife and cut all the silicone off the axle nut and threads and then wire wheel it to get it all removed but I'll tell you what you weren't losing no center caps
I’ve heard of doing this as well but man I would have been mad if it had that much on it lol
That'll only work if you have wheel spacers. Because the axle nut sticks out farther in the rear then those caps do. I noticed with my applesauce cups which are about the same depth as the stock caps. The applesauce Cup on the rear was right up against the end of the axle nuts. Couldn't run a flatter cap. I have wheel spacers now, and I can run a flat cap
Great point!
Why couldn't a guy just glue them on with some locktite adhesive.. don't they just stay in the wheels anyways when you pull them off ?
I lost a cap on my krx on my first ride. Definitely irritating
You could definitely use some adhesive if you haven’t lost them already haha I wasn’t so lucky
how's that sidewall slug holding up? do you have many miles riding with it in?
It’s holding up great! Have a bunch of miles on it. Put it in in September and been all over Have almost worn the bolt off of it lol still holds air