You can show a LUT in the BlackMagic cameras to your operators. Then send the LOG profile to the ATEM switcher where you apply the LUT, & do Color grading to BlackMagic Cameras from the ATEM switcher software on a computer. -Nathan R
The Zoom H6e is primarily for pulling in ISO Mics and Recording them to an SD Card, but there is likely some Audio Interface available via USB. For Live Stream Audio, You should utilize a properMixing Console such as an X32, or WING mixer where you can Compress, EQ, Gate the channels as you build the mix. -Nathan R
@ I use Sony but that's ok because I have log assist which lets me see the lut in action on the camera. Are you saying that I can apply luts on the Atem mini using it's pc software?
@@basedontruestories I'm pretty sure you can apply a LUT to a camera using the "ATEM Software Control" software. BUT ONLY BlackMagic Cameras can be Color Graded with the ATEM. With your Sony Broadcast Cameras, you need to use their "camera control unit (CCU)" to color grade remotely. If you are using Sony Mirrorless cameras, then you will need to do the work inside of the cameras to get them to match in the switcher. -Nathan R
Thanks for the helpful tips. I'm creating a checklist and your video sounded like a good start. Just one question though. I understand that the stream quality setting does NOT impact the recorded video, only the streamed quality. I think USB-C to a solid state disk can get about 70mb/s instead of about a tenth of this. I'm pretty sure it was in an Alex Pettitt video he claimed he'd incorrectly stated the stream settings impact on recorded video, but worked out this wasn't correct. Anyway thanks again - nice job
Hi, I'm not sure what Alex said, but These ATEM switchers only have the single encoder so whatever settings you choose, those same quality settings apply for Streaming and the SSD recording. That means users can't record in the best quality possible to the SSD, and then stream in a lower quality because of bandwidth issues. -Nathan
tôi gặp vấn đề vời Atem mini pro Iso, nó có thể phát trực tiếp trên youtube nhưng không thể trên Facebook, bạn có thể giúp tôi ko ? . tôi rất cám ơn bạn về điều đó
If you are having issues streaming to FB and not TH-cam from your ATEM Mini. I suggest looking into your FB account, because it does not sound like an ATEM hardware issue. -Nathan R
Only if the cameras have HDMI Video Out. The ATEM can't switch between digital sources. It sounds like you could use OBS and a StreamDeck controller to do what you want. -Nathan R
Using Mac for Restream, connect with USB C back of ATEM blackmagicpro. Using 2nd monitor to display all the plugins at same time. How do we connect a Projector to a screen {noTV} up front {needs the INPUT} on ATEM?? 2nd PC is Windows using as PREVIEW shot. Where should we plugin all to back ATEM? Help?
Hi, So you are sending the ATEM Program feed to the computer via USB-C for streaming with Re-Stream. Then you have an input to the ATEM Mini Pro from a computer, and I'm not really sure what the issue is. Can you share more? :) Thanks! -Nathan R
@@CrazyAmazingDesigns ATEM hooked up to MAC via USBC, 2 cameras, mic, MONITOR full plug in screen, 2nd windows PC for in-house videos, does the projector go to the ONLY "OUTPUT" HDMI CONNECTION? Where do I plugin the 2nd PC Windows ? Where do I plugin the MONITOR showing all the full screen Preview, Program, Cam 1, etc pages ? Need to know where to plug everything in. we lost the INHOUSE video when we switched to RESTREAM & quit using the QUICKTIME in the MAC for inhouse video... what are the MAC connections when using ATEM Blackmagic PRO? and where should all the other connections go when using a PROJECTOR & not TV for OUTPUT inhouse
Hello, I'd love to dive into this with you but this sounds like a larger conversation than we can practically have inside this TH-cam Comments Section. If you are able to book a Zoom Training with me, I can get all of your questions answered. With a couple of sessions we could probably even get things working how you'd like. Crazyamazingdesigns.com/training -Nathan R
Hello, we are working on adding youtube as a luvestreaming source at my church. I currently stream to Facebook from sling studio. Would I be ok streaming to TH-cam from our atem mini pro extreme?
The ATEM Mini Extreme is a great streaming encoder, no reason you couldn't stream to TH-cam from it. In the future I would look into and consider RESI or Boxcast as a Streaming Provider. Both platforms can be programed with Automatic Stream Start and Ending times, they stream to multiple destinations, and with RESI you gain Resilient streaming so automatic error checking to make sure all packets make it to the destinations. -Nathan R
I use an X32 full board as my mixer, i also have a gopro 12 & an insta 360 ace pro along with 2 android phones, i'd like to live stream my bands rehearsals via Facebook & or Twitch, will this switcher work for what i'd like it to do, & if so, maybe a simple explanation on how to connect all this, thank you
Hi, It should just be a matter of getting cables from the different devices that convert to HDMI-A. That should be a straight forward proccess on Amazon. Yes the ATEm switcher should work fine, these have scalers built into each input that allow for different reolution cameras to be connected. -Nathan
We record live stream through a proprietor that already uses the USB-C out on our switcher. Does that eliminate the ability to record iso? or is there another way?
@ ISO recordings can only happen through the USB-C, So if they only have 1 USB-C, then they can't use the USB-C to send program video to ProPresenter on the Computer. Yes they could stream through the ENCODER via Ethernet, but that does not give them 1.ISO Recording to an SSD Drive 2.Camera into Computer via USB-C. -Nathan R
I have a question in our church we use two computers one for OBS and other one for pro presenter. With the obs with project the cameras on the lateral screens but on the main screen we can’t put the cameras. What can I do to be able to project cameras in the main screen .
Hi, If you'd like to show cameras on the screens I'd suggest using a Hardware Video switcher such as the ATEM Mini Extreme, or the ATEM Constellation switcher. Bring in the graphics and cameras to the switcher, Then send the ATEM output to the screens. Basically, build the Live Stream Locally, then use that on the screens. Don't try to create a separate feed. If you used the constellation switcher, you could bring in ProPresenter, + cameras, then send output 1 to the side screens, and output 2 to the center screen. Now you can use a StreamDeck to switch between showing cameras, and ProPresenter on each screen being fed from the switcher. -Nathan R
Greeting....I have a Atem Mini pro installed in the church where i handle the streaming. Is there a way where i can access the atem mini pro from my home. sometime the priests or other people accidently touch the wrong button and they always call me. are you able to provide a solution to this? thank you and nice demo.
@@josehernandez5396 You would need to leave a computer on, that is connected to the ATEM on the Local Network. Then Remote Desktop to that computer when you want to control the ATEM. -Nathan R
Hi! You can use your Chameye Controller to control the motion of your PTZ cameras. But you will have to run HDMI cables from the cameras to the ATEM switcher to input signal. Note: if you are going more than 10ft, you will need to convert the HDMI signal to SDI and then back to HDMI to connect to the ATEM switcher. -Nathan R
Merci broh ❤👏👍🤝🏽🇭🇹
You Are Welcome! -Nathan R
Thank you for this. How do I stream with log profile and apply lut to it before going live?
Also, would you recommend a Zoom H6e for live streaming with xlr mic?
You can show a LUT in the BlackMagic cameras to your operators. Then send the LOG profile to the ATEM switcher where you apply the LUT, & do Color grading to BlackMagic Cameras from the ATEM switcher software on a computer. -Nathan R
The Zoom H6e is primarily for pulling in ISO Mics and Recording them to an SD Card, but there is likely some Audio Interface available via USB. For Live Stream Audio, You should utilize a properMixing Console such as an X32, or WING mixer where you can Compress, EQ, Gate the channels as you build the mix. -Nathan R
@ I use Sony but that's ok because I have log assist which lets me see the lut in action on the camera. Are you saying that I can apply luts on the Atem mini using it's pc software?
@@basedontruestories I'm pretty sure you can apply a LUT to a camera using the "ATEM Software Control" software. BUT ONLY BlackMagic Cameras can be Color Graded with the ATEM. With your Sony Broadcast Cameras, you need to use their "camera control unit (CCU)" to color grade remotely. If you are using Sony Mirrorless cameras, then you will need to do the work inside of the cameras to get them to match in the switcher. -Nathan R
Brilliant video - thank you 👏🏽
@@ram_wales yeah! Thanks for checking it out. What other video topics would you like to see me cover? -Nathan R
Love this video Bro! Thank you.
You are Welcome! -Nathan R
Thanks for the helpful tips. I'm creating a checklist and your video sounded like a good start. Just one question though. I understand that the stream quality setting does NOT impact the recorded video, only the streamed quality. I think USB-C to a solid state disk can get about 70mb/s instead of about a tenth of this. I'm pretty sure it was in an Alex Pettitt video he claimed he'd incorrectly stated the stream settings impact on recorded video, but worked out this wasn't correct. Anyway thanks again - nice job
Hi, I'm not sure what Alex said, but These ATEM switchers only have the single encoder so whatever settings you choose, those same quality settings apply for Streaming and the SSD recording. That means users can't record in the best quality possible to the SSD, and then stream in a lower quality because of bandwidth issues. -Nathan
tôi gặp vấn đề vời Atem mini pro Iso, nó có thể phát trực tiếp trên youtube nhưng không thể trên Facebook, bạn có thể giúp tôi ko ? . tôi rất cám ơn bạn về điều đó
If you are having issues streaming to FB and not TH-cam from your ATEM Mini. I suggest looking into your FB account, because it does not sound like an ATEM hardware issue. -Nathan R
Hello, it is possible to connect 4 webcams instead of 4K professional cameras?
Only if the cameras have HDMI Video Out. The ATEM can't switch between digital sources. It sounds like you could use OBS and a StreamDeck controller to do what you want. -Nathan R
Using Mac for Restream, connect with USB C back of ATEM blackmagicpro. Using 2nd monitor to display all the plugins at same time. How do we connect a Projector to a screen {noTV} up front {needs the INPUT} on ATEM?? 2nd PC is Windows using as PREVIEW shot. Where should we plugin all to back ATEM? Help?
Hi, So you are sending the ATEM Program feed to the computer via USB-C for streaming with Re-Stream. Then you have an input to the ATEM Mini Pro from a computer, and I'm not really sure what the issue is. Can you share more? :) Thanks! -Nathan R
@@CrazyAmazingDesigns ATEM hooked up to MAC via USBC, 2 cameras, mic, MONITOR full plug in screen, 2nd windows PC for in-house videos, does the projector go to the ONLY "OUTPUT" HDMI CONNECTION? Where do I plugin the 2nd PC Windows ? Where do I plugin the MONITOR showing all the full screen Preview, Program, Cam 1, etc pages ? Need to know where to plug everything in. we lost the INHOUSE video when we switched to RESTREAM & quit using the QUICKTIME in the MAC for inhouse video... what are the MAC connections when using ATEM Blackmagic PRO? and where should all the other connections go when using a PROJECTOR & not TV for OUTPUT inhouse
Hello, I'd love to dive into this with you but this sounds like a larger conversation than we can practically have inside this TH-cam Comments Section. If you are able to book a Zoom Training with me, I can get all of your questions answered. With a couple of sessions we could probably even get things working how you'd like. Crazyamazingdesigns.com/training -Nathan R
@@CrazyAmazingDesigns i will get back with u heading to church now, to review all plugins again
Good video. Does this Webcam method solve "cache full"
Hello, I'm not familiar with that error, but on Google I see several options to solve it. So you should be able to find solutions. -Nathan R
Hello, we are working on adding youtube as a luvestreaming source at my church. I currently stream to Facebook from sling studio. Would I be ok streaming to TH-cam from our atem mini pro extreme?
The ATEM Mini Extreme is a great streaming encoder, no reason you couldn't stream to TH-cam from it. In the future I would look into and consider RESI or Boxcast as a Streaming Provider. Both platforms can be programed with Automatic Stream Start and Ending times, they stream to multiple destinations, and with RESI you gain Resilient streaming so automatic error checking to make sure all packets make it to the destinations. -Nathan R
I use an X32 full board as my mixer, i also have a gopro 12 & an insta 360 ace pro along with 2 android phones, i'd like to live stream my bands rehearsals via Facebook & or Twitch, will this switcher work for what i'd like it to do, & if so, maybe a simple explanation on how to connect all this, thank you
Hi, It should just be a matter of getting cables from the different devices that convert to HDMI-A. That should be a straight forward proccess on Amazon. Yes the ATEm switcher should work fine, these have scalers built into each input that allow for different reolution cameras to be connected. -Nathan
We record live stream through a proprietor that already uses the USB-C out on our switcher. Does that eliminate the ability to record iso? or is there another way?
@@cherieparsons3683 yes, if you have the ATEM model with just the one USB-C then you have to pick between recording and streaming. -Nathan R
@@CrazyAmazingDesigns Really? Can't you get that network connection for streaming via the Ethernet port??
@ ISO recordings can only happen through the USB-C, So if they only have 1 USB-C, then they can't use the USB-C to send program video to ProPresenter on the Computer. Yes they could stream through the ENCODER via Ethernet, but that does not give them 1.ISO Recording to an SSD Drive 2.Camera into Computer via USB-C. -Nathan R
I have a question in our church we use two computers one for OBS and other one for pro presenter. With the obs with project the cameras on the lateral screens but on the main screen we can’t put the cameras. What can I do to be able to project cameras in the main screen .
Hi, If you'd like to show cameras on the screens I'd suggest using a Hardware Video switcher such as the ATEM Mini Extreme, or the ATEM Constellation switcher. Bring in the graphics and cameras to the switcher, Then send the ATEM output to the screens. Basically, build the Live Stream Locally, then use that on the screens. Don't try to create a separate feed. If you used the constellation switcher, you could bring in ProPresenter, + cameras, then send output 1 to the side screens, and output 2 to the center screen. Now you can use a StreamDeck to switch between showing cameras, and ProPresenter on each screen being fed from the switcher. -Nathan R
Greeting....I have a Atem Mini pro installed in the church where i handle the streaming. Is there a way where i can access the atem mini pro from my home. sometime the priests or other people accidently touch the wrong button and they always call me. are you able to provide a solution to this? thank you and nice demo.
@@josehernandez5396 You would need to leave a computer on, that is connected to the ATEM on the Local Network. Then Remote Desktop to that computer when you want to control the ATEM. -Nathan R
When streaming our church service the picture idarke than when I use my iphone, how do I fis that?
What cameras are you using?, What Switcher are you using?, How is your Key Lighting on the stage? Email me if you'd like. -Nathan R
How do I feed my chameye controller into my ATEM mini pro? They are on the same network?
Hi! You can use your Chameye Controller to control the motion of your PTZ cameras. But you will have to run HDMI cables from the cameras to the ATEM switcher to input signal. Note: if you are going more than 10ft, you will need to convert the HDMI signal to SDI and then back to HDMI to connect to the ATEM switcher. -Nathan R