I like how you threw the toughest threat at the plate first instead of beat the crap out of it with lesser threats compromising the plate. It seems to be a more realistic test.
I love this content from IV8888, I know it’s not as easy to do body armor tests, machine gun burn downs, and videos like that but these are the best! Thanks guys!
Nice. I just bought a pair of these RMA plates last week and got them in yesterday. I'm very impressed with them. Light, comfortable and high quality. Fantastic service from the RMA folks too. I got a pair of the Level III+ Model 1092 (medium) plates to go into my Crye JPC 2.0 plate carrier. Could not be happier with my purchase.
Dadgum! That suppressor on the mosin is pretty impressive. The sonic crack on my earbuds was louder than the muzzle report. It sounded like an air rifle pop.
Just bought the armor with a OD green carrier. Also came with a free gong! Thanks for the video. I've been watching all the armor test videos and this one sold me.
How thick is the plate? My first thought upon seeing it was, "that looks really thick", but then Eric said it was relatively thin, or "not that thick"(I forget which.) Granted, all my plates are metal, but this plate looks like it's an inch and a half thick on video. Very light though. Perhaps worth looking into(or would be if I didn't already have 4 plates and 3 carriets/rigs that I'll likely never need/use in an actual firefight.)
@@Mockturtlesoup1 Old comment but it is thin compared to stuff like the SAPI which required a soft armor backer. If you actually want thin armor which you can wear under a shirt you have to go with steel or titanium.
Purchased 9 stripper clips with 90 rounds of M855A1 at a NY Antique show 4 years ago. At the time I wasn’t aware what I’d purchased for $25. Nice to see a performance review, and since I don’t expect to ever engage beyond a hundred yards, it’s effectiveness.
Yeah that was an absolute steal. The only way to get it is if someone smuggles it out of an armory. Wish they sold surplus like m855 because its actually really effective against just soft tissue as well. There are some videos of guys testing it in gel and it looks really nasty. Would be the ultimate round to stockpile considering its very good at defeating armor and good in soft tissue.
TH-cam has done a really good job of hiding this channel. I'm subbed to you guys but a rarely see that a new video has been posted. Makes me wonder how many other channels they are doing this to and what other content I'm missing. I just had a sudden realization that i haven't seen a video from you in ages. Well yes I am still subbed but I honestly cant recall the last time I saw that a video has dropped on my Subscription Tab. I don't like notifications thats not my thing so i like to use the Subs Tab to see whats new....I can't recall seeing anything but when I go directly to your channel yeah youre still around. Well I'll have to keep an eye on this for every channel i guess
Could be that you have too many subscriptions, or maybe TH-cam doesn't really make use of the subscription tab as much anymore, because I always get notifications about new videos from these guys as well as my other subs. I don't use the subs tab since notifications lets me know when a new video comes up right away.
Yeah I'm sub to only like 4 gun channels and nothing els and my TH-cam looks like how it looks when your not logged in, they are hiding shtf channels and gun channels
An old man I used to know had some 30-06 "accelerator" ammo he brought back from Korea. It was 55 grain ammo out of a 30-06. I'd love to see some testing done with it because it had to be wicked fast.
Funny enough, 55g fmj ball loaded to ~3400 fps will put a neat little hole in your ar 500 plates at close range. Considering that's a 55g 5.56 projectile your 30-06 would definitely destroy that plate.
@@Richardjohnson6969 for .223 certainly but not 5.56, just look at ramshot load data. Ramshot tac + 55g fmjbt, the published load data for 5.56 shows 27.3 grains for a muzzle velocity of 3450 out of a 16 inch barrel and a pressure of 61,335 psi. Yes this is like tippy top of max load but still within published load data, also I'm pretty confident the military loads m193 that hot at or at least close to that max.
I'd really love to see some armor testing with the Agilite Raider series armor, it seems to be a bit more resilient than this cheaper stuff, who knows.
@@BuffRANGEI believe it's actually produced by HESCO, because it's produced in Aberdeen Washington, and the material compositions are nearly identical from what I can see.
I shot the same .30-06 GI black tip out of a Remington 700. At 100 yds, went clean through 3/8 mild steel, then 3/4 alum plate. Recovered core wasn't even dented.
I was at the range yesterday and decided to test some old plates i had. They are steel Lvl 3. M193 5.56 went straight through them. They defeated all 223 round i had tho. Kinda confused as to why. My 223 rounds were moving faster and were made out of the same material as my 5.56. Also my buddy had plates by a different brand that stopped M855 but did NOT stop M193. I have no idea what is going on.
Why? The most common hunting rounds are 30-06, 308, 6.5 CM, 30-30, and 270. Of all of those the 30-06 has the most penetrating power due to the bullet size and barre exit velocity. If it’s capable of holding a 30-06 black tip (which is what it’s rated for), the calibers with lower Ft-Lb/energy and lower velocity will not go through He basically proved it by showing what it was capable of with a higher power round
I have shot 444 Marlin through a disc used in farm equipment at about 10-15 yards in both FMJ and Hornady XTP hollow point. We shot a plow shear too and the 444 FMJ punched a golf ball sized hole through it, we found the top piece and the bottom but the rest was smithereens. The bullet diameter there is .429. Couldn’t penetrate the flat thick center part of the disc where the hub is but did tear 1 1/2” back the thickness of the material. I think some chunky hunting rounds would definitely be worth testing. I bet a 375 H&H would be tough to stop too, especially in a solid like a grand slam big game round. PS The other rounds we tried basically turned themselves inside out on the plow shear except the .223 FMJ made a bearing sized nick in the edge.
lvl 3+ is a great compromise plate. There's some EXTREMELY light versions out there and honestly I wish the military issued both so we could have chose mission specific whether we were gonna go full heavy or 80% as good at 1/3 the weight.
Hey Eric and team IV8888 👋🏽 M855A1 😯 everything’s better with steak sauce That’s insane it stopped 7.62x54r at 100 Tell daisy to stop eating the bench legs
Have a couple pairs of 1092s. Love em. They performed perfectly in Buffman's tests against everything but M855A1. That stuff is nasty but not a realistic threat I'm worried about.
That M855A1 looks a lot like the Remington Bronze tip ammo of the 1970s. Even though the armor stopped bullet hopefully it reduces the blunt force trauma. Of course is a person had the Mauser setup that he has why aim for the vest when the neck on up is a softer target and thus easier to defeat the person.
Level IV is supposed to stop even 30.-06 AP. Of course if enough high power rounds of any kind hit ceramic multiple times in one area, they will bust through.
kenneth goze yes it is… but 855 or 855A1 from a 20” M4 is arguably more apt at defeating armor! It’s that unstoppable speed and the narrow bearing surface! Never ceases to surprise me! I love physics!
@@scottlawrence1826 M855A1 stands no chance of defeating Level IV, at least from a single or at least quite a few shots evenly placed per NIJ testing. Of course in an actual engagement, if you could place 2 rounds very close to each other (inside of 2") the second one has a chance of penetrating because the ceramic strike face would be compromised by the first. Defeating ceramic armor is more about speed. It plays heavily into bullet construction, as well as appropriate speed. M995 AP is currently the known "king of the hill" for what I would consider armor piercing 5.56, and most level IV will stop it at NIJ distance (45') from a 22" barrel.
@@BuffRANGEus citizens need to resolve this problem and get bullets at velocities thst can go through level 4 and out of shorter barrels and higher speeds
@ ~ 10:50 mark, that's a large part of the reasoning behind NGSW and 6.8mm Common Cartridge: 855A1 simply poops out against even lighter armor, past c. 130 yards. And that's coming out of the 18 inch barrel; out of a 16 inch barrel, let alone 14.5 inch, the velocity would be even less.
I read somewhere that there was an insert for the interceptor armor that gives it protection against 7.62 NATO, just wondering wether or not it’s effective or not.
I got hit with an AK bullet in the chest back in 2003 while in Iraq. We of course had on our Interceptor vests with SAPI plates installed front and back. The plate did indeed stop the round from entering my chest but the impact still broke 3 ribs and brused my left lung. The impact did knock me off my feet (but not blow me back 10 feet like you see in the movies). Take-home point, High Level plates can stop rifle bullets but don't think you are just going to get back up like nothing happened,
I'd really like to know where to find M855 A1 ammo to purchase if its possible to find any. Also how much does that built Mosin weigh? Its a beautiful build.
I thought you were talking to me when you asked if the m855a1 would make it through and I answered. Was alil embarrassed when the guy behind the camera answered
Every time you fire I cry a little for your AR. The a1 is, if memory serves, only 10k less pressure than the standard 5.56 barrel proofing cartridge (60,000 vs 70,000). Proofing rounds are not at all intended for anything other than proofing the barrel, 1 or 2 and done arguably for the lifetime of the barrel. Repeatedly firing, especially rapidly, the a1 drops your barrel life by about half and will, if rngesus is against you, snap your bolt (500-1000 rounds), beat the dog shit out of your recoil system, and occasionally splits a crack into a receiver once you break 1000rds (assuming something else didn't fail before you got to 1k). It's a great round. I very nearly bought a bunch after I fired some before doing the due diligence on a cartridge I wasn't familiar with. The problem with the a1 is that there isn't currently a rifle that exists that can run it consistently without the ammo eating the rifle instead of vice versa. If someone can channel the spirits of Kalashnikov, and Browning and modify the AR platform to take the pressure beating that ammunition dishes out I'd buy one just so I could keep a couple magazines exclusively loaded with a1. good ammo, but damn it's angry. lmao
I would be very interested to see another test like this, but with ballistic gel on the other side as a comparison to see what those rounds would do to the gel after punching through a plate
I would also love to see some super hot 6ARC loadings tested vs various armor! I have a feeling that because of the design of the round (high bc ect) it will slip right through that armor! Especially a light for caliber, like 80 grain out of a full length 6ARC SPR.
I'm impressed by the Mosin-Nagant. It's kind of like taking a Ford Escort and putting a Mustang Engine in it. It works, but you wonder about the expense and really why???
Very interesting, with round to round minor velocity differences and minor manufacturing variations of the plate that stand off distance might vary a few yards either way shot to shot placement to placement, heck even if the angle of the plate is a few degrees tilted the apparent thickness changes minutely but all these things could go for you or maybe they could stack up the other way too. 30-06 is an effective round in most loadings, amazing that it’s over 100 years ago that was adopted and it’s still a formidable cartridge. I have never fired one but I have heard enough stories to know they’re effective. Have you thought about trying a hunting round like a 444 Marlin with a soft point ? They say that at about 100 yards and under that’ll take any animal in North America. That round I have fired. Based on what some reloads can do from a 14” pistol barrel to a water jug or a disc blade it would be interesting to see what a rifle would do with a few more inches of barrel against a plate.
The Mosen fires a 7.62 from a 54mm cartridge, please say that. Also, a .30 cal threat and a .22 threat can jave VERY different results on different armor. Mass, size, and velocity all matter.
I really liked that 9mm AP ammo that one channel tested from the 80s that went right through the 3A plate, could you imagine having 19 rounds of that in a pistol… oof
Nice round if you need to shoot through 3/8 steel plates but really hard on the bolt and barrel. I’ll stick with my heavy 223 hornady JHP and for bulk ammo the tried and true original green tip.
The plate with with stands these threats. Wli it stop hunting rounds my answer would be yes but the back face deformation might just kill you. Use your 9.3 mmx63mm with a heavy bullet see the plate with most likely stop it as small and fast and it might pass the backface deformation would be interesting
I like how you threw the toughest threat at the plate first instead of beat the crap out of it with lesser threats compromising the plate. It seems to be a more realistic test.
Bingo.
That’s a nice AR. My wife’s boyfriend lets me hold his Daniel defense sometimes. I really want to get one of my own
Well done sir, and good luck
@@derrickroberts93 thank you. Would you like to meet my wife?
😂😂😂 thanks for the laugh brother that was hilarious
Maybe your wife will let you, one day. 🤣
Hahaha 🤣
Eric: We’re testing level III+ armor
Spirit of Barry: Bring the 30-06
Eric: Yaaaassssss
RIP BARRY
I love this content from IV8888, I know it’s not as easy to do body armor tests, machine gun burn downs, and videos like that but these are the best! Thanks guys!
Hey Eric i see you lost some weight man , good for you bud and may God bless you and Chad
Nice. I just bought a pair of these RMA plates last week and got them in yesterday. I'm very impressed with them. Light, comfortable and high quality. Fantastic service from the RMA folks too. I got a pair of the Level III+ Model 1092 (medium) plates to go into my Crye JPC 2.0 plate carrier. Could not be happier with my purchase.
Dadgum! That suppressor on the mosin is pretty impressive. The sonic crack on my earbuds was louder than the muzzle report. It sounded like an air rifle pop.
Eric, you should bring out the Fugly Mosin for some armor testing
Just bring it out again
@@TacticoolCraig burn some eyes
Thing go through a telephone pole and keep going
I’m so glad I stocked up on gunbroker m855a1 2014 lot goes 3260 from my 20 inch barrel absolutely devistating round
Just bought the armor with a OD green carrier. Also came with a free gong! Thanks for the video. I've been watching all the armor test videos and this one sold me.
How thick is the plate? My first thought upon seeing it was, "that looks really thick", but then Eric said it was relatively thin, or "not that thick"(I forget which.)
Granted, all my plates are metal, but this plate looks like it's an inch and a half thick on video. Very light though. Perhaps worth looking into(or would be if I didn't already have 4 plates and 3 carriets/rigs that I'll likely never need/use in an actual firefight.)
@@Mockturtlesoup1 I'd say about 3/4in. I'll measure when I get home and give you a update if you want
@@Mockturtlesoup1 just messaged the plate and it's 1 inch
@@Mockturtlesoup1 Old comment but it is thin compared to stuff like the SAPI which required a soft armor backer. If you actually want thin armor which you can wear under a shirt you have to go with steel or titanium.
Love watching your body armor tests! See you guys next weekend 👊
Purchased 9 stripper clips with 90 rounds of M855A1 at a NY Antique show 4 years ago. At the time I wasn’t aware what I’d purchased for $25. Nice to see a performance review, and since I don’t expect to ever engage beyond a hundred yards, it’s effectiveness.
Yeah that was an absolute steal. The only way to get it is if someone smuggles it out of an armory. Wish they sold surplus like m855 because its actually really effective against just soft tissue as well. There are some videos of guys testing it in gel and it looks really nasty. Would be the ultimate round to stockpile considering its very good at defeating armor and good in soft tissue.
@@Nick-sx6jm cavitation is king
@Patrick Faricy they are talking about m855A1, notice the A1 at the end...
Wouldn't be surprised Taliban got hold stockpiles of M855A1
I got ahold of some and I’m not Taliban lol.
Of course they did, everything was left behind.
Well the Taliban were not known for really wearing body armour so not sure why they would have bothered sending the A1 ammo. Costs twice the price.
@@CS-zn6pp all the military has used for the past 5 ish years
@@CS-zn6ppThey do now
TH-cam has done a really good job of hiding this channel. I'm subbed to you guys but a rarely see that a new video has been posted. Makes me wonder how many other channels they are doing this to and what other content I'm missing. I just had a sudden realization that i haven't seen a video from you in ages. Well yes I am still subbed but I honestly cant recall the last time I saw that a video has dropped on my Subscription Tab. I don't like notifications thats not my thing so i like to use the Subs Tab to see whats new....I can't recall seeing anything but when I go directly to your channel yeah youre still around. Well I'll have to keep an eye on this for every channel i guess
Could be that you have too many subscriptions, or maybe TH-cam doesn't really make use of the subscription tab as much anymore, because I always get notifications about new videos from these guys as well as my other subs. I don't use the subs tab since notifications lets me know when a new video comes up right away.
2.53M subscribers
Yeah I'm sub to only like 4 gun channels and nothing els and my TH-cam looks like how it looks when your not logged in, they are hiding shtf channels and gun channels
An old man I used to know had some 30-06 "accelerator" ammo he brought back from Korea. It was 55 grain ammo out of a 30-06. I'd love to see some testing done with it because it had to be wicked fast.
Funny enough, 55g fmj ball loaded to ~3400 fps will put a neat little hole in your ar 500 plates at close range. Considering that's a 55g 5.56 projectile your 30-06 would definitely destroy that plate.
He lied. The stuff was made in the 70s. It was commercial ammo.
@@whatsmolly5741 3400 FPS is in overpressure land. Not realistic
@@Richardjohnson6969 for .223 certainly but not 5.56, just look at ramshot load data.
Ramshot tac + 55g fmjbt, the published load data for 5.56 shows 27.3 grains for a muzzle velocity of 3450 out of a 16 inch barrel and a pressure of 61,335 psi.
Yes this is like tippy top of max load but still within published load data, also I'm pretty confident the military loads m193 that hot at or at least close to that max.
@@whatsmolly5741 M855A1 is about 62,000 so thats not impossible
Dude can we just take a minute to appreciate Eric's shirt, probably one of my favorites so far! Very jealous I want one so bad
Is it new or limited? I searched the whole shop and couldn't find it.
@@mecha91 I've checked the store as well doesn't appear to be with the new arrivals.
Now do the same thing with RMA level 4 ceramic plates. Curious to see what happens with that especially since those are the plates I run
Mr Guns & Gear did a test on RMA lvl 4
I'd really love to see some armor testing with the Agilite Raider series armor, it seems to be a bit more resilient than this cheaper stuff, who knows.
Possibly looks Hesco like.
@@BuffRANGEI believe it's actually produced by HESCO, because it's produced in Aberdeen Washington, and the material compositions are nearly identical from what I can see.
@@albertkropp I’d trust the rma 1192s a thousand times more than agilites tbh
@@peeeoii2738 Why is that?
@@albertkropp hesco is known for bad QC practices
Love waking up to another armor video!
No doubt whatsoever that Black-Tip went through & through..nice vid Eric.
Thanks for inviting Chris from Marksman TV
I live in a heavily hunted area so seeing how these rounds work at range is a good mental note
Love to see the black tip loaded into a 300 win mag... Then see how far it would punch thru body armor.
I'd like to see that. I'm just curious what the black tip would do in a 300 blackout. I wonder if it would penetrate.
The atf is illegally banning ammo that actually works
Ordered level 4 on the 30th. Shipping from IA to CO. It’s already gonna be here tomorrow. FAST SHIPPING!
I shot the same .30-06 GI black tip out of a Remington 700. At 100 yds, went clean through 3/8 mild steel, then 3/4 alum plate. Recovered core wasn't even dented.
For the inevitable Tarkov comments, this is the equivalent of GOST level 5 body armor
Not really, I’d say GOST level IV since M855A1 pierces it at 45 feet.
I was at the range yesterday and decided to test some old plates i had. They are steel Lvl 3. M193 5.56 went straight through them. They defeated all 223 round i had tho. Kinda confused as to why. My 223 rounds were moving faster and were made out of the same material as my 5.56. Also my buddy had plates by a different brand that stopped M855 but did NOT stop M193. I have no idea what is going on.
That m855a1 is a pretty damned impressive round.
@@c3bhm the round is AP and therefore restricted. It’s available if you know where to look.
@@c3bhm you got it figured. Same reason for no auto
I want some. And I found some. Google baby. Bout to own some 🤠
@@Richardjohnson6969 it's not AP
@@jake4194 it is tho
Now I'd like to see the 7.62x39 API rated plates going up against M855A1.
7.62x39 is slow, not a good characteristic for AP
I would really like to see this test with various hunting calibers.
Why? The most common hunting rounds are 30-06, 308, 6.5 CM, 30-30, and 270. Of all of those the 30-06 has the most penetrating power due to the bullet size and barre exit velocity. If it’s capable of holding a 30-06 black tip (which is what it’s rated for), the calibers with lower Ft-Lb/energy and lower velocity will not go through
He basically proved it by showing what it was capable of with a higher power round
@@Refrigerator_ did you watch the same video? The black tip made it through both times.
Thinking the same thing
@@Refrigerator_ Because it is good information for future rifle purchases.
I have shot 444 Marlin through a disc used in farm equipment at about 10-15 yards in both FMJ and Hornady XTP hollow point. We shot a plow shear too and the 444 FMJ punched a golf ball sized hole through it, we found the top piece and the bottom but the rest was smithereens.
The bullet diameter there is .429. Couldn’t penetrate the flat thick center part of the disc where the hub is but did tear 1 1/2” back the thickness of the material.
I think some chunky hunting rounds would definitely be worth testing. I bet a 375 H&H would be tough to stop too, especially in a solid like a grand slam big game round.
PS The other rounds we tried basically turned themselves inside out on the plow shear except the .223 FMJ made a bearing sized nick in the edge.
Wonder if the m855a1 can penetrate safelife 3+ FRAS.
lvl 3+ is a great compromise plate. There's some EXTREMELY light versions out there and honestly I wish the military issued both so we could have chose mission specific whether we were gonna go full heavy or 80% as good at 1/3 the weight.
Shooting this ammo on the government’s dime at the height of the ammo shortage was a good feeling lol.
probably shot 1000 rounds of m855a1 back when 556 was going for a dollar a round, all at no cost to me lol
lol same, wish I could trade some 55gr for the A1 considering I was shooting 25m away.
You guys get to have all the fun. I wasn't surprised with the results.
I really love the 66 ! I have one in 8x68S with a set trigger and a vintage Zeiss scope on it.
Hey Eric and team IV8888 👋🏽
M855A1 😯 everything’s better with steak sauce
That’s insane it stopped 7.62x54r at 100
Tell daisy to stop eating the bench legs
Is that a mask with a moustache protector?(you're wearing in your profile picture)..
If so it's pretty sweet..
Have a couple pairs of 1092s. Love em. They performed perfectly in Buffman's tests against everything but M855A1. That stuff is nasty but not a realistic threat I'm worried about.
i dont know it all but if biden were to send the army after us and they comply, they will have the A1.
From what I've seen, the a1 will pen some level iii+ plates but not all, it depends on the mfg and how much "+" they put on it
Need to describe the difference between m855 and m855a1 in the beginning of video. I know, but many don’t. Thanks for the vid.
That M855A1 looks a lot like the Remington Bronze tip ammo of the 1970s.
Even though the armor stopped bullet hopefully it reduces the blunt force trauma.
Of course is a person had the Mauser setup that he has why aim for the vest when the neck on up is a softer target and thus easier to defeat the person.
3:47 best part of the video. Smooth 😎🤙
I would like to see the same test but with a Lvl III+ICW plate with a Lvl IIIA soft armor backing, to see if the N855 or AP rounds get through.
these are great videos really appreciate what yall do
You have lost weight ! Good for you sir
Short answer before I watch…The 855A1 will rip through this like butter.
I’m glad I’ve gotten level iv plates now.
I’m an ammo nerd, I’m stoked that you did some m855A1 testing! I’m still super curious if it could penetrate level 4 armor.
Level IV is supposed to stop even 30.-06 AP. Of course if enough high power rounds of any kind hit ceramic multiple times in one area, they will bust through.
kenneth goze yes it is… but 855 or 855A1 from a 20” M4 is arguably more apt at defeating armor! It’s that unstoppable speed and the narrow bearing surface! Never ceases to surprise me! I love physics!
@@scottlawrence1826 M855A1 stands no chance of defeating Level IV, at least from a single or at least quite a few shots evenly placed per NIJ testing. Of course in an actual engagement, if you could place 2 rounds very close to each other (inside of 2") the second one has a chance of penetrating because the ceramic strike face would be compromised by the first.
Defeating ceramic armor is more about speed. It plays heavily into bullet construction, as well as appropriate speed. M995 AP is currently the known "king of the hill" for what I would consider armor piercing 5.56, and most level IV will stop it at NIJ distance (45') from a 22" barrel.
@@BuffRANGEus citizens need to resolve this problem and get bullets at velocities thst can go through level 4 and out of shorter barrels and higher speeds
@ ~ 10:50 mark, that's a large part of the reasoning behind NGSW and 6.8mm Common Cartridge: 855A1 simply poops out against even lighter armor, past c. 130 yards. And that's coming out of the 18 inch barrel; out of a 16 inch barrel, let alone 14.5 inch, the velocity would be even less.
Great test guys, very interesting finds.
I read somewhere that there was an insert for the interceptor armor that gives it protection against 7.62 NATO, just wondering wether or not it’s effective or not.
7.62 NATO is not a hard threat to stop. Any rifle rated plate can stop it
@@fujimi715 ok thanks
I got hit with an AK bullet in the chest back in 2003 while in Iraq. We of course had on our Interceptor vests with SAPI plates installed front and back. The plate did indeed stop the round from entering my chest but the impact still broke 3 ribs and brused my left lung. The impact did knock me off my feet (but not blow me back 10 feet like you see in the movies). Take-home point, High Level plates can stop rifle bullets but don't think you are just going to get back up like nothing happened,
I heard the new trend in body armor is cross fit plates!
I like that you throw the worst it’s supposed to handle at it first, why waste ammo shooting something you know it’s going to stop.
I'd really like to know where to find M855 A1 ammo to purchase if its possible to find any. Also how much does that built Mosin weigh? Its a beautiful build.
GunBroker.
I thought you were talking to me when you asked if the m855a1 would make it through and I answered. Was alil embarrassed when the guy behind the camera answered
Every time you fire I cry a little for your AR. The a1 is, if memory serves, only 10k less pressure than the standard 5.56 barrel proofing cartridge (60,000 vs 70,000). Proofing rounds are not at all intended for anything other than proofing the barrel, 1 or 2 and done arguably for the lifetime of the barrel. Repeatedly firing, especially rapidly, the a1 drops your barrel life by about half and will, if rngesus is against you, snap your bolt (500-1000 rounds), beat the dog shit out of your recoil system, and occasionally splits a crack into a receiver once you break 1000rds (assuming something else didn't fail before you got to 1k).
It's a great round. I very nearly bought a bunch after I fired some before doing the due diligence on a cartridge I wasn't familiar with. The problem with the a1 is that there isn't currently a rifle that exists that can run it consistently without the ammo eating the rifle instead of vice versa. If someone can channel the spirits of Kalashnikov, and Browning and modify the AR platform to take the pressure beating that ammunition dishes out I'd buy one just so I could keep a couple magazines exclusively loaded with a1.
good ammo, but damn it's angry. lmao
Great vid as usual
Royal
Majesty
of
Armor
Love the series! You should do another one with 338 lapua and 300 win mag and see if you need level 3+ or 4 and at what range.
I would be very interested to see another test like this, but with ballistic gel on the other side as a comparison to see what those rounds would do to the gel after punching through a plate
I learned a lot here, thanks Eric. 😊
Thank you guys! Love the topic!
Bringing the word “knarly” back. Way to go!
Hello there👋👋,how are you doing today? Hope you’re having a wonderful day?GOD BLESS YOU!!❤️
Just noticed the Fender hat. Eric’s a true renaissance man.
I would also love to see some super hot 6ARC loadings tested vs various armor! I have a feeling that because of the design of the round (high bc ect) it will slip right through that armor! Especially a light for caliber, like 80 grain out of a full length 6ARC SPR.
speed kills armor 6 ARC just doesn't have the speed
How do people get M855A1? Doesn't the ATF consider it AP handgun ammo?
This RF2 plate uses a very thin ceramic strike face, so the chances of the M2AP stopping is very little.
But m855A1 clean though kinda surprised me here..
@@Bestportlandcleaners did you happen across my test of this plate ? It can only handle SBR m855a1 at 45’.
@@BuffRANGE Will be checking it shortly 👍🏻
Damn I have notifications turned on and haven't seen a video from you in months!
Would love to see this test on steel plates as well. Everyone hates on steel plates, I wonder how they would compare.
Threads = threats
Love this content 855a1 get some. Look forward to the outcome
I'm impressed by the Mosin-Nagant. It's kind of like taking a Ford Escort and putting a Mustang Engine in it. It works, but you wonder about the expense and really why???
Love that text font. Very BASED.
let’s get *Danger Close*
Eric, Schmidt Rubin 1889 vs the plate. For science!
Brother, you know damn well overseas we blew holes through plates with our M-4’s and 855A1’s.
Me warily wearing body armor.
Eric: "but will it stop a mosin?"
Please keep the information coming
Would be nice to see a 243/22-250 vs body armor because we all know speed wins in penetration??
That suppressor sounds so crispy
That's insane. I have two mosins and they both sound like cannons going off
That Mosin is badass!!
Been a while since I've watched this channel
'06 blacktip will go through a brick wall or a 20'' hardwood tree trunk. Changes your definition of what you think is cover.
lvl 4 will stop 30-06 and .308 black tip.
@@semajniffirg230 I never said nothing would stop it, so your comment is a non sequitur.
Gonna leave an obscure statement here:
"the one that the cows picked apart".. If you know then you know..lol
Haven’t seen that mosin in years!
Very interesting, with round to round minor velocity differences and minor manufacturing variations of the plate that stand off distance might vary a few yards either way shot to shot placement to placement, heck even if the angle of the plate is a few degrees tilted the apparent thickness changes minutely but all these things could go for you or maybe they could stack up the other way too.
30-06 is an effective round in most loadings, amazing that it’s over 100 years ago that was adopted and it’s still a formidable cartridge. I have never fired one but I have heard enough stories to know they’re effective.
Have you thought about trying a hunting round like a 444 Marlin with a soft point ? They say that at about 100 yards and under that’ll take any animal in North America. That round I have fired. Based on what some reloads can do from a 14” pistol barrel to a water jug or a disc blade it would be interesting to see what a rifle would do with a few more inches of barrel against a plate.
Great videos and thank you ! 😊👍👍
M855A1 is awesome. Good penetrating tip and the jacket *totally* doesn't behave like a hollowpoint.
**cough** Hauge Conventions **cough**
The Mosen fires a 7.62 from a 54mm cartridge, please say that. Also, a .30 cal threat and a .22 threat can jave VERY different results on different armor. Mass, size, and velocity all matter.
Thank you guys. I ask u to do this 6 months ago.
I really liked that 9mm AP ammo that one channel tested from the 80s that went right through the 3A plate, could you imagine having 19 rounds of that in a pistol… oof
the all steel ABC round?
Great video. 30.06 AP is truly AP.
Its old and outdated.
M855A1 was practically _designed_ for defeating 3+ body armor. It literally has no other application.
Test some of those IIIA hard plates at 200+ yards and see what happens. They're like 60 bucks a plate on eBay.
I like the shirt Professor Eric. 😊
Nice round if you need to shoot through 3/8 steel plates but really hard on the bolt and barrel. I’ll stick with my heavy 223 hornady JHP and for bulk ammo the tried and true original green tip.
Good stuff. Thanks guys
The plate with with stands these threats. Wli it stop hunting rounds my answer would be yes but the back face deformation might just kill you. Use your 9.3 mmx63mm with a heavy bullet see the plate with most likely stop it as small and fast and it might pass the backface deformation would be interesting
I got hit in the osprey British plate in Afghanistan and I did it’s job beautifully. The rifle rest is OTT for the distances your shooting at.
Is that a tank in the backround at 4:28?? 😂