Easy DIY Bluetooth Speaker Setup
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2020
- Today we wanted to bring you an easy DIY bluetooth speaker setup with a Star Wars flare (of course!) And what better Star Wars Prop to use as the base for this project than the Kyber Crystal Crate from Rogue One, A Star Wars Story.
SUPPORT THE SHOW!!!
Enjoying our episodes? Do you want a behind the scenes look and more? Consider supporting us on Patreon and helping us keep all this geeked out shenanigans going!
/ thesmugglersroom
Make sure to Subscribe!!! goo.gl/FpnuFy
You can find us and more of our builds and content below!
www.thesmugglersroom.com/
/ thesmugglersroom
TheSmugglers...
/ smugglerroom
Parts needed for this project!
3D Print Original Work:
Thingiverse by Luke Massassi from the Netherlands
Kyber Crystal Container www.thingiverse.com/thing:379...
His Facebook group is called Massassi Models, please give him a look!
/ 882163935539046
Also, there is a TH-cam Channel he runs as well
th-cam.com/users/massassi...
Our "Re-Mix" of his 3D model simply removed material from inside the crate to make it hollow. This way there is room inside for the speakers and electronics. A big THANK YOU to Luke Massassi for creating such a great prop project.
You can find the Re-Mix of the Crate here: www.thingiverse.com/thing:432...
Parts:
2” Speakers from Electronic Goldmine
www.goldmine-elec-products.co...
Slide Switch from Electronic Goldmine
www.goldmine-elec-products.co...
Lithium Battery 3.7v from Amazon
www.amazon.com/dp/B07TXHQJXB/...
Lithium Battery Charger Board from Amazon
www.amazon.com/XCSOURCE-Lithi...
Bluetooth Receiver / Power Amp from Amazon
www.amazon.com/2X5W-Bluetooth... - แนวปฏิบัติและการใช้ชีวิต
Hi All, We made a MISTAKE! LOL, i know right? How could we do it? Well, it happens from time to time. That said, we were incorrect during the section that explains the speaker wiring. We should have wired the speakers IN PHASE vs what we had done. By wiring the way we did we are reducing certain frequencies and canceling out audio. This will cause us to lose the low end. Big thanks to Andrew Lineker and @WayneFlanigan for helping us keep on the straight and narrow. Sorry for the misstep all!
Yeah, I was baffled that you'd want to wire the speakers out of phase.
Wiring is where my downfall is, I would love a series on electronics!
We will totally get something for that put together!
Tin your wires... I have a bachelors degree in electrical wiring and the best advice I can give is to tin your wires first :>
Man, I just love how you constantly expand your skillset and have no problems working together with like-minded makers you get along with!
Thank you! My Father (The Junk Yard Jedi) is where all this madness started for me. He has always been the best teacher!
I would love to strap one to my backpack while I walk around batuu! Ahhh man I miss disneyland :(
Yes!! Me Too!! . . . and we miss it too :(
I took a basic electronics class in high school 20 years ago and a refresher would be great.
Indeed! Sounds good, we'll get it going.
Honestly your vids are keeping me sane in this fucked up time. I hurt so much with the violence and hate but your love of Star Wars and focused mission keeps me sane. Fan for life brother.
Thank you Tony. We are so glad to hear that what we are doing helps, even if just a little. All that is happening is so awful, and it is so very sad to see such hate. You take care of yourself and be safe my friend.
possibly one of my favorite episodes!!
First off, i love the channel. With the world being crazy, I've got a couple videos to go back and catch up on. That said, i love this build. I recently built myself my dream 8ft desk/workbench. I'm a crafter in multiple mediums and have/am in the process of adding my geeky flair to it. 2 or 3 of these creates (only 1 or 2 may be actual speakers) to the space would be a perfect addition. You guys keep making something out of nothing. This is the way.
Hey there! That’s is awesome, a new 8’ workspace makes my hand itch to build!!! Thanks so much for watching!
@@TheSmugglersRoom i made it mostly using pallets and painted it black and grey with red and blue designs. I can message you pictures on fb if you want.
Wow, I can think of many projects for that canister. Fantastic job gents.
An amazing job done by the Master Junkyard Jedi! Love the Kyber crate bluetooth speaker idea superb! 🤩👍
Thank you, so glad you liked it! Now go make one for yourself!!!
That's super cool!
That was super cool! Love the quality and detail of the 3-D print.
Thank you, the Prusa is a remarkable printer for sure.
Another Awsome episode Brian I feel that your team is one of the best on the web easy to fallow easy to understand and a vary family like feeling I never did this kind of thing until I ran across your video now I have be come a maker and love it thanks for what you do and share
That is so wonderful to hear, thank you! The entire reason we started sharing what we do is to see people try it themselves. Thank you so much!
That would make a pretty cool battery bank as well! I would buy one. Awesome video.
Great Idea, love to see more of these kinds of builds
We certainly will. And if I am not mistaken you are the original artist of the box on thingaverse correct? I’m so thankful for your work. The other awesome stuff you have up there is so great! Thank you for allowing us to showcase this!
Led and electronic tutorials would be awesome. Even effective soldering for joint wires together en route to their board
I promise we are working on that very thing!
A great looking project. I will have to print this out and give it a try.
Please do Wayne, it was a great little project!
Wow looks cool might build it someday
Do it!!!
This turned out really well!!
Thank you good sir! Much appreciated!
AMAZING
Glad you like it!
The hologram Junkyard Jedi dance made my day,
Haha loved that too!
LOL! Glad it brought a smile!
Awesome 👍
Love it🥇
Sweet!!!
Oh, I LOVE THIS!
I HOPE TO MAKE ONE.
MAYBE USE MY SABER BOX!
There you go! What a great idea. I have one from GE, and it would be perfect!
Yaaaaassss!!!! Man, wish I had 3d printer!!! Post the build on the BIG BOX version!!! I am lovin weekly content again! Inspiring me to get off my furloughed butt and start making again!!!!
So glad you liked it! We certainly will be doing the big box build. We have a very specific use for the inside too! ;)
so cooool!!!!!!! love it~
Junkyard Jedi dance??? Yes! Do the Junkyard 🔉🎶 💃
I was told not to quit my day job!
I thought you were retired??? LOL
Retired? He’s in his prime
Awesome job!
Thank you!
Your dad it’s so creative♥️ love that speaker !!! And yes we love to see a tutorial in electronics
Will do!! Thank you!
That would make a cool lunch box, too!
If it was printed a bit larger it sure could be!
Just another awesome build under your belts! This one I'd have too much fun with!
Thank you, can't wait to see your!
So cool I’m forwarding this to our XWing electronics guru!
Awesome!
Pretty cool project, an awesome way to take our favorite music to the next level :D
Thank you!
Junkyard Jedi Rocks!
Thank you for watching, it means a lot.
Great job again! Really love the paint job. Geeks need somewhere to go to for electronics including led’s. Can’t really find anything out there that shows step by step, or at least close to it. Thanks again.
Great video; I was just thinking about this crate in a recent Rogue One viewing. I wanna see more about the larger scale crate too!
You absolutely will see a full build of it, and what we use it for is hilariously awesome!
Awesome! I know I say it in every video but it is true:)
Thank you! As long as we keep bringing you episodes for you to say that then we are doing something right.
The Smugglers Room I really appreciate that you respond :D
I'd love to see a how too series
Even though I have subscribed and turned on the bell , I rarely get any notification when you upload.
Which sucks because I like your videos.
Sorry to hear that. Not sure why that happens. Occasionally we are delayed, but we try to upload at least every Tuesday if that helps. Appreciate you coming back to watch.
Awesome build! That orange and black colour scheme seemed really familiar... finally hit me at 8:49. 😉
LOL!!! Right? Thanks so much!
Awesome job, would definitely like to see more electronics videos.
Great! We will certainly do that!
Oh, I would LOVE to learn more about electronics! I need to give my builds some life, and I think little LEDs can go a looong way.
(Also, I totally feel like the Junkyard Jedi listening to those amazing tunes in your videos)
LOL! Thank you! We can certainly get a series together!
Yes. Simple electronic how to vid!
Sold!
Yes. May we please have a simple electronics wiring series?
Indeed, looks like it is a winner, so we'll get that going!
Thanks for the file, printed it all in one go on the Artillery SWX1 wish I could post some picks :)
Thank you! So glad you were able to get one made. You can post pictures and tag us on Instagram, Twitter, or FaceBook.
A how to series would be amazing!
Thank you for the feedback, we are going to move forward on getting one up and going for you all!
Awesome! :)
I would love to see a wiring series. You do so much with these projects and arduino!
Will do! Thank you for the feedback!
A little bit advanced for me but I love the content keep it up you've been a great and huge Influence on me I can't thank you enough oh by the way i loved how your dad was just dancing in the corner 😂
Thank you!
Hey, I Enjoy the video!💥😎👍🏿
Always love a bit of Jedha! Great build guys 👍
LOL! Thanks my friend!
Yes electronics. I want to make a cockpit console for my truck dashboard.
Awesome! Love that idea!
Hey Brian. You are so lucky to have the Junkyard Jedi in your life. My Dad was a very hard working man but had No Time for things, like this, that he would consider frivolous & not worth doing. He was great with mechanics but not about to do any crafting. Count yourself Very Lucky, & tell him to keep building something out of nothing.
Thank you. I agree, i have been very lucky. I learned so many things from my father, and that continues to this day. Now we have the chance to share his amazing skills with all of you, and I get to do this with him. Very blessed indeed!
Great job master Jedi! Having episodes more in depth into electronics would be fantastic. Ohms, amps, volts... what does it all mean!!! But seriously it would be helpful. Love the content and genuinely look forward to your videos posting. Great information and a great escape.
Thank you very much! We are definitely going to get those electronic tutorials uploaded soon!
that is epic :D will totally be trying that out :D
AWESOME!!!!
Sweet! My printer needed something to do today!
Yes . . . Yes it does ;)
I would totaly watch your simple electronic tutorial :D
Awesome! If it is helpful for you on your projects then we are 100% willing to put it together.
I'd like to see a basic electronics and paint weathering tutorial. Thanks for the all the great how to's you've done so far!
You got it! We'll get a series up for you!
Amazing! Would love to hear in person. My phone cant reproduce how much bass it probably has. Maybe look at bose stuff for ported waveguide designs?
What you made is a sort of subwoofer box the old bass tubes. But they had a mono sub with a passive radiator on the opposite side. In phase with a port in the middle would give some IMPRESSIVE low end! Bandpass style. Look it up!
Will do! Thank you!
Awesome video man, as always. I've been doing electronics for about 15 years. But I would love to see a Electronics how to video. A quick refresher on electronics that would be great!
Fantastic! We will get that going for you!
Disney reused the Rogue one crate design for their Galaxy's Edge legacy lightsabers. I repainted mine so it wouldn't look so plastic. I kept a blue color but did some silver paint brushing on edges to make it look like worn metal and I dry brushed the rebellion emblem with a metallic copper color. I keep my Starkiller lightsaber in it since the Luke hilt that came with it is displayed with my Vader hilt on a stand.
Cool build! You all have the best ideas. The electronics series sounds awesome, especially since I would imagine you'll put your own sci fi twist on it! :D Now I just need to talk someone into printing one of those sweet crates for me.... :D
Thanks John! We will be working to get a series up soon! You can always submit the files to Shapeways and they can print for you. here is a link to their website: www.shapeways.com/
First video of yours that I found. Nicely done. I would like to see you do wiring and soldering instructions.
Thank you very much DJ, we are glad to hear you enjoyed it. We are certainly going to put up a series.
Would LOVE a how to series!!!
SOLD!
Great build, do you have plans on the bigger crate TJJ showed at the end? Would love to make a coffee table for our star wars gaming room!!
Thank you! We are planning to make that big crate as an episode.
Looken good. And yes I would like a how to video.
Great, we'll get that going!
There's a great upside to this project that I think many folks aren't thinking about: Rehoming an existing bluetooth speaker. Target (I know the physical stores are currently closed) sells a Vivitar bluetooth for about USD$10, bust that thing open, being careful of the electronics and just remount it into this hollow case.
You'll get the same effect without the intimidating soldering and whatnot.
*edit: Also I'd love to see a wiring diagram of how you've done this setup and/or a "simple electronics" tutorial video
Fantastic Idea!!!! Thank you! You are 100% correct, you could totally make that work. Love that you shared this with everyone! We will definitely be looking at an electronics tutorial.
I'm 100% interested in the simple wiring videos
Sweet! Thank you!
oooo i like the bigger crate
LOL, when we build another one you will LOVE what we put inside!
you could take the same Design of the box but put a plastic window in the lid and put in 7-12 inch figures and proper it up on its edge for display boxes ( just an idea
You should do a DIY Star Wars prop style custom Playstation 4, Nintendo Switch, and 3DS.
Hey, recently subscribed to you channel. Love the content. A primer on wiring and soldering would be appreciated. Can't afford a 3D printer just yet, but I'm sure if I asked around, I might be abled to get some print time on a friend's printer.
Hey Smugglers Room! With they way you present information, I'd love to see a series on wiring.
I've thought about making a Bluetooth speaker for years, but I've been concerned about too things.
1. the wiring
2. The quality.
I've owned 5 of them, and only been happy with one. (UE Boom). I don't need it to be water proof, but I don't want to have to put it in a bowl so I can hear it around the fire.
I'm sure you know what I mean.
That would be cool
Love the video and crate. Get to see the Junkyard Jedi's building skills and dance moves in one video!! Is there any latch on the box to hold the lid on there? I guess something could always be added with some tiny magnets.
Thank you Keith! There isn't a latch, but a rare earth magnet would work and be hidden!
Could you do another video on the astromech.net stuff?
I am looking into making one myself and want to get as much knowledge of it as possible.
We will certainly do more Astromech building in the future, we have plans for several more droid builds!
Definitely want to see wiring and led videos
We are very glad to hear that, and we are working on getting some Geek-e-cation on that out to you soon!
Yes! Please basic how to on LED/ electronics!
Done and Done! :)
didnt happen to have a sound test with the lid down creating a closed enclosure by any chance?
Hello I have autism.
I love you're channel, And I love star wars.
It is one of my Special Interests.
Keep ongoing and I will keep on watching.
Good luck :)
Hi Jameson! If you are willing to keep watching us then I promise we will keep building something out of nothing! Be safe out there!
@@TheSmugglersRoom Will do! :)
Can anyone tell me what the dimensions of this is?! I want to build a larger version as a portable boom box with built in subwoofer and wanted to keep the scale as close as possible.
Well, I think I found my first project when my 3D printer comes in.
And I'd LOVE a how-to series on soldiering and the like.
YES!!!
I would love to learn more about electronics
Done and done! We’ll get that going!
Quick question where is the link for the diagram for the electronics? And how did you correct the In-phase of the speakers. I appreciate your time with helping.
Aaron Rioux I corrected the in phase by reversing the wires on one speaker, so they both are the same now. The wire diagram is just following the inputs and outputs on the electronic boards are marked clearly.
Brian, you should put them up on the Cargo section of your website. Love projects by the junkyard jedi.
Thanks Dustin! We might have to do that.
You should sell things like this as diy kits we could we could learn with I'd love one
Thanks William, the best part is, if you have a 3D printer, the files are free. Then you just need the simple electronics!
Please do a video on the electronics would great help love your videos
And sorry but is being sane in my household it’s a rule everybody has to be insane and have a good time know matter what
And your videos help us achieve that
I would like a short series on wiring leds and speakers (in phase) as I really have no experience other than just trial and error. It would really be nice to understand what I'm doing! lol
Sold! We are in the works as we speak!
For those of us who don't have 3D printers but are looking into getting one, which would you recommend for our first 3D printer?
Does programming skills matter all that much or is it all about the price tag?
Joshua I have a Prusha MK3 it is an incredible printer, no fussing around with mirrors and hair spray, yes it may cost more but worth not having problems.
I don’t have access to a 3D printer. Is there another way to create/fabricate the box? Styrene maybe?
Styrene would totally work! No reason at all you could not do that. You can use a program called Pepakura to take the 3D files and flatten them. Then you could print out the template and use that on your styrene to cut the box. From there you are off to the races! tamasoft.co.jp/pepakura-en/
Could the 3d model have been modeled with the holes and holders built into the print
Yes indeed, and that would certainly save time.
So how about a build video on that giant crate!
LOL . . . oh do we have plans for that. You will see!
do you sell those pieces??
Please add a video on wiring! I am awful with small electrical circuits!
Done! We are getting that going!
Great build guys!
Tired of all the hate for Rogue One. It’s easily the best SW since Empire. I think the director really captured the feel of the books and games from the 90s and 2000s. And the music, despite not being Williams, carries the spirit of the same universe. It’s part of the new canon and that wipes out Kyle stealing the plans, but there’s no denying this is a fantastic movie with some perfect performances from extremely talented actors.
Thank you Aaron! I totally agree with you. Rogue One is simply awesome! I thought it was well done, great characters, and It's among my favorite films of all time!
I would love to see a LED wiring video please!
Awesome, we will do that!
I would love electronics vids
Done!!!
@@TheSmugglersRoom You are awesome 🤘
What 3d printer are you using, I'm looking to get one
We are using the Prusa Original. Here is a link: www.prusa3d.com/
Thank you Brian and thank you to that looks like your dad I think right I'm not sure I never asked you but it looks like it is let me know and if it is that's really cool that you and your dad do that together. I lost my dad 2 years ago and I think a great show would be a son and his dad project even though it looks like you already do that but how about doing that that would be awesome. OK chubby geek peace out
Thank you! Yep, the Junk Yard Jedi is indeed my father. All my learning started with him, and he continues to inspire and teach me to this day! Sorry to hear about your loss, I can't imagine that, and we cherish all the time we have to build together as well as projects we share with one another.
@@TheSmugglersRoom I miss him every day Brian we were not great when I was little but in my adult hood after I had gotten divorced we did everything that I wanted to do as a kid as an adult and I took a year off from working to take care of him all the way to the end so cherish you Brian because that is one in a million that you have with him
...now i'm wondering if Kyber and Coaxium are similar. Like maybe Kyber is the raw natural material, and Coaxium is a processed version?
probably not
I'll be honest, i am not sure. I think the kyber crystals are simply crystals like you find in nature. But I could be wrong.
How would you charging?
The battery has a charger that we cut the connection into the box.
I kinda want to make this but w/ wood+metal*
That "wood" be awesome!