Here to confirmed , it can also cause NO CRANK NO START, just happened to me was getting code for over a few months for camshaft bank2 driver side on my 06 z, swapped it out in 30 mins and car cranked right up nice and healthy. Sends loving to all vq owners you got this 🙌🏽
I'm glad you showed me the alternate way to replace the #2 bank sensor. I was thinking the same thing as you but everybody kept pulling the air flow tube and throttle body off.
This same thing happens to the 2nd gen Nissan Xterras also. Bought one today and on the way home it kinda spluttered and then continued running but the check engine & slip warning light came on. Also became hard to start. When I got home and put the code reader on it & found the C1130 code and 5 of the P0345 codes They have the 4.0 V6. Thanks for the great video, found it while researching what was going on with my new to me 2012 Xterra
First thing you can do before you change the sensor reset the lights or you can disconnect the battery negative sides almost for 30 seconds and see what happened after that
Okay we need to change the sensor but when you change the sensor I got to show you how to reset the lights how to reset the lights gets a OBD clear all the code start the car then turn off the car go to mass airflow sensor disconnected start the car until he gets angel lights on then turn it off and put the OBD scan the car then put the plug back to the mass airflow and reset the lights and start a car let the car running at least 15 minutes to 20 minutes then go drive the car this process is for all Nissan Infiniti
Make sure the connection is good look for the fuse for the crankshaft position sensor and if anything is good go and reset the ECU there is a lot of video how to reset the ECU and the car be dropped better after that or if you have a tools to scan the car and there is some other code and abs sites if you don't reset that code the code they got to stay there so you have to reset all the call together and one shot
Here to confirmed , it can also cause NO CRANK NO START, just happened to me was getting code for over a few months for camshaft bank2 driver side on my 06 z, swapped it out in 30 mins and car cranked right up nice and healthy.
Sends loving to all vq owners you got this 🙌🏽
Yes that sensor can cause the car don't start
I'm glad you showed me the alternate way to replace the #2 bank sensor. I was thinking the same thing as you but everybody kept pulling the air flow tube and throttle body off.
This same thing happens to the 2nd gen Nissan Xterras also. Bought one today and on the way home it kinda spluttered and then continued running but the check engine & slip warning light came on. Also became hard to start. When I got home and put the code reader on it & found the C1130 code and 5 of the P0345 codes They have the 4.0 V6. Thanks for the great video, found it while researching what was going on with my new to me 2012 Xterra
First thing you can do before you change the sensor reset the lights or you can disconnect the battery negative sides almost for 30 seconds and see what happened after that
@@LessExpensivefix Yes sir, I tried that first. I cleared the codes and it run for maybe 15-20 seconds before check engine light came back on.
Okay we need to change the sensor but when you change the sensor I got to show you how to reset the lights how to reset the lights gets a OBD clear all the code start the car then turn off the car go to mass airflow sensor disconnected start the car until he gets angel lights on then turn it off and put the OBD scan the car then put the plug back to the mass airflow and reset the lights and start a car let the car running at least 15 minutes to 20 minutes then go drive the car this process is for all Nissan Infiniti
I replaced my camshaft sensor but still have the same problem I think is a fuse you know ware the fuse is located for the camshaft sensor
I have an issue i got the po345 code and replaced the bank2 but i am still getting it do you think it could be a crankshaft sensor
Make sure the connection is good look for the fuse for the crankshaft position sensor and if anything is good go and reset the ECU there is a lot of video how to reset the ECU and the car be dropped better after that or if you have a tools to scan the car and there is some other code and abs sites if you don't reset that code the code they got to stay there so you have to reset all the call together and one shot
Preciate you sir👍🏽
Would this be the same for a p0340 with the c1130 code
Thank you so much 💓 💗 💛
You're welcome anytime
That box said NTK not NGK... COUNTERFEIT??
I know 😂😂
Thanks much you get me idear
Where did you buy the part?
Advance Auto Parts
I buy the parts from Advance Auto Parts
Wish you would've showed more of what you were doing that we couldn't see.
I just have the c1130 no other code… any idea?
I got c1131 what’s the fix ?
👍
😍😍😍😍
c1132 engine 3 fuel cut system fault infiniti g35, do you know what this is?
Check your brake fluid if he's low if it's low add some fluid
NGK & NTK ARE DIFFERENT BRANDS
I got c1131 what’s the fix ?