Great Video. I have a question, I am using Cadling v10 with a L1800 DTF printer with roll feed and it is printing very well. However, when the print is finished, It looks like Cadlink is not 100% finishing the Job. I have to power off and power on my printer again in order that the printer releases the sheet so it comes out of the printer. It is a bit difficult to exaplain so I really hope you unterstand what I mean. Any idea what could be the reason?
Thanks for this info, i try cadlink 11 trial , i setup :default roll and paper patch: roll rear paper feed, Layout Auto Nest, after printinting copies the roll come out Continuously and unplug the power what's going wrong? does it need any setting from the printer control panel?
What is the longest contious roll feed print you have done? Im affraid of starting to print and then half way though a print session that the printer defaults to like 48" when my print might run 60"+. I have a ciss for the printer.
Thanks for the video. What option would I choose if I want the film to continue to feed after the last print? I have the seismo 11 shaker oven.and the printer stops after the last print and I need it to continue to go thru the oven before I cut the film. Also which option is for continuous print when printing multiple prints.
How did you get the color settings right?! I bought one and started it up with the original cartridges, got it into cadlink and I couldn't get the color red to save my soul.....I don't use the roll feed tho..... please help
Great Video. I have a question, I am using Cadling v10 with a L1800 DTF printer with roll feed and it is printing very well. However, when the print is finished, It looks like Cadlink is not 100% finishing the Job. I have to power off and power on my printer again in order that the printer releases the sheet so it comes out of the printer. It is a bit difficult to exaplain so I really hope you unterstand what I mean. Any idea what could be the reason?
Great video
Always thank for your support!
Thanks for this info, i try cadlink 11 trial , i setup :default roll and paper patch: roll rear paper feed, Layout Auto Nest, after printinting copies the roll come out Continuously and unplug the power what's going wrong? does it need any setting from the printer control panel?
Where fo you cut it before hitting the paper guide cleaning?
What is the longest contious roll feed print you have done? Im affraid of starting to print and then half way though a print session that the printer defaults to like 48" when my print might run 60"+. I have a ciss for the printer.
It happens to me that it doesn't stop shooting when it finishes printing, but I don't have that "paper path" option :(
Hi, how many layer passes do you have set for the qeue?
Just one
Thank u for that. Did u manage to revers paper feed when its feed to much ? I mean finish print cut off then pull back roll ?
I just cut and forward the film
Thanks for the video. What option would I choose if I want the film to continue to feed after the last print? I have the seismo 11 shaker oven.and the printer stops after the last print and I need it to continue to go thru the oven before I cut the film. Also which option is for continuous print when printing multiple prints.
There should be a setting in the rip for roll feed advance
@@CustomDesignPress I tried that. I chose 10 and I chose 20, it still stopped.
Changed to roll media, but I don't get the option to change my paper path. Any ideas how to fix this?
You need to select rear roll media
@@CustomDesignPress I dont get any sort of drop down to even select that option when I change the media to roll.
Why cad link not acrorip? I think about this printer also, but also think which software best?
Both cadlink and acro rip works for this printer.
How did you get the color settings right?! I bought one and started it up with the original cartridges, got it into cadlink and I couldn't get the color red to save my soul.....I don't use the roll feed tho..... please help
Are you using cadlink v10 or v11?
@@terrystouchphotos438 I have both. I believe this video was made in V10 but V11 can be made to the classic V10 version