I have seen a corroded fuse box do this very same thing with the same code, and have also seen a bad ignition switch for this same code, thanks for yet another repair on this code.
i dont mean to be offtopic but does someone know a tool to log back into an Instagram account..? I stupidly forgot the login password. I love any tips you can give me.
@Chris Billy I really appreciate your reply. I got to the site through google and im in the hacking process now. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
I have something similar going on... my ground wire shorted to the filler neck. I cleaned all the grounds along the drivers side self replaced the ground wire to the filler neck. Everything is strong, it just won't turn over. Since it's was a short i have 2 codes P0622 and U1000 saw this after connecting it battery after charging it.
If you can, the Manual book you have for the cold colors I’m trying to find the one for the body frame for the trailblazer mines was cut completely on a deaf and they took my fuse box out. I have every other wires connected. I need to know the codefor the body frame wire bloom 2008 trailblazer
Cant find the ecm connector diagram on all data. I see the path you took on top of the printed paper but when I get to engine Control module I don’t see a section that says diagram. Any suggestions
I have a similar problem same code on 08 gmc envoy 4.2 my ignition switch only last about 8 months and it starts set this code won’t start at times , or starts and dash lights get dim and stumbles to stay running. If I replace the ignition switch all goes away and runs like a champ for 8 months when the ignition switch starts to fail again. So I’ve replaced ignition switches about 5 times 😂already? If any had a run with this problem please respond. Thanks
Hey man thanx for the info in this video because I was had my 08 xlt trailblazer water pump go out as I was driving and it overheated shut off so I bought new battery water pump and alternator put it all on and still no crank turns over no crank you hear the water pump working but it’s driving me mad lol think this may be my issue
Sometimes they are hard to find. You can go to alldata.com or Mitchell’s website and pay for a 1 vehicle diy membership. Save all you can to a PDF and you will always have it.
You can purchase them on alldata diy. Not to expensive and you get everything for your car. I usually go through and print everything as a pdf and save it
My gmv envoy would crank no start yesterday,I let sit for a few hours and started back up. But now it has the p 1682 code check engine light on and starts up everytime? Any tips? Thank you
It could be a few different things. The ignition module in the column which is easy to swap out. It could be a broken circuit inside the fuse box. There are videos that show you how to remove your fuse box and test for continuity or a broken wire like the one I was working on.
THANK YOU FOR THE VIDEO AND THE VALUABLE INFO. MY SITUATION CANNOT BE A BROKEN WIRE, BUT IT COULD BE THE RELAY. OR, IT COULD BE THE FUSE BOX ALL TOGETHER. MY WIPERS GO KOOKOO AT TIMES WHEN IT RAINS, AND MY MOON -ROOF ONCE GOT STOCKED CRACK OPEN FOR A FEW DAYS. CADILLAC SRX, 2012. FWD.
Glad I could help. It took me a long time to find this. I was watching all the other TH-cam videos and kept going back to the fuse block or ignition switch
@@r.velasco6896 it's the fuze box motherboard when it gets hot it shuts the engine off till it cools down then you'll be able to start it again a day or 2 later till it overheats again. The guy who bought mines not too long ago knew exactly what it was. 🤷🏿 put his in from his old ss that he blew the engine on & drove off. Hasnt had a problem since. So buy a new fuze box module
is it me or was their anything me mentioned that was resolved …. asking from a non mechanical minded woman . ha… i’ve no clue what u finally mentioned to dissolve the problem .
The last 3-4 minutes him putting that jumper wire is the confirmation to the diagnosis that there is a break in a wire. Specifically the wire he bypassed. As well he mentioned the long yellow wire that was broken early on in the video.
If you can, the Manual book you have for the cold colors I’m trying to find the one for the body frame for the trailblazer mines was cut completely on a deaf and they took my fuse box out. I have every other wires connected. I need to know the codefor the body frame wire bloom 2008 trailblazer
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
![NISAMANEE - TADA (ท้าดา) [ OFFICIAL MV ]](http://i.ytimg.com/vi/hcQHEPMmJpU/mqdefault.jpg)
I have seen a corroded fuse box do this very same thing with the same code, and have also seen a bad ignition switch for this same code, thanks for yet another repair on this code.
Had the exact same problem with my 2010 GMC Sierra 2500HD. Your video was excellent! Saved me much time and $$.
Thanks Shaun!!!
Thanks, glad my video helped!!
i dont mean to be offtopic but does someone know a tool to log back into an Instagram account..?
I stupidly forgot the login password. I love any tips you can give me.
@Wallace Gibson instablaster =)
@Chris Billy I really appreciate your reply. I got to the site through google and im in the hacking process now.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Chris Billy it worked and I actually got access to my account again. I'm so happy!
Thanks so much you saved my account :D
Man you make this look so easy lol. Im having the same issue for my 2007 escalade. im going to give it a try
I have something similar going on... my ground wire shorted to the filler neck. I cleaned all the grounds along the drivers side self replaced the ground wire to the filler neck. Everything is strong, it just won't turn over.
Since it's was a short i have 2 codes
P0622 and U1000 saw this after connecting it battery after charging it.
Those gm power dist boxes are famous for developing hairline cracks in the copper wire traces.
Yes they are, I had one ordered before I even got this car in the shop
If you can, the Manual book you have for the cold colors I’m trying to find the one for the body frame for the trailblazer mines was cut completely on a deaf and they took my fuse box out. I have every other wires connected. I need to know the codefor the body frame wire bloom 2008 trailblazer
So its a wire ?? Mt tbss turns off after it gets warmed up and then it starts cranking but no start same code too
Did you Figure it out?
Cant find the ecm connector diagram on all data. I see the path you took on top of the printed paper but when I get to engine Control module I don’t see a section that says diagram. Any suggestions
I have a similar problem same code on 08 gmc envoy 4.2 my ignition switch only last about 8 months and it starts set this code won’t start at times , or starts and dash lights get dim and stumbles to stay running. If I replace the ignition switch all goes away and runs like a champ for 8 months when the ignition switch starts to fail again. So I’ve replaced ignition switches about 5 times 😂already? If any had a run with this problem please respond. Thanks
Hey man thanx for the info in this video because I was had my 08 xlt trailblazer water pump go out as I was driving and it overheated shut off so I bought new battery water pump and alternator put it all on and still no crank turns over no crank you hear the water pump working but it’s driving me mad lol think this may be my issue
Can’t find the diagram for a 2003 GMC ENVOY SLT 4.2 anywhere online.
Sometimes they are hard to find. You can go to alldata.com or Mitchell’s website and pay for a 1 vehicle diy membership. Save all you can to a PDF and you will always have it.
Did u find the diagram? I need it for the exact vehicle
Awesome job
Hello Bro, I've some Troble Like That but the Chevrolet Captiva DTC 1682 Driver 5 Line 2....? can You Share Your PDf Bro.....? Thank A lot Buddy😊
My dam truck was sitting for 6 months , thanks a bunch man you are GOOD PEOPLE👍
I am happy to hear this worked out for you!! Thanks for watching.
We're did you get the somatics for the diagram?
You can purchase them on alldata diy. Not to expensive and you get everything for your car. I usually go through and print everything as a pdf and save it
My gmv envoy would crank no start yesterday,I let sit for a few hours and started back up. But now it has the p 1682 code check engine light on and starts up everytime? Any tips? Thank you
It could be a few different things. The ignition module in the column which is easy to swap out. It could be a broken circuit inside the fuse box. There are videos that show you how to remove your fuse box and test for continuity or a broken wire like the one I was working on.
Nice job.
THANK YOU FOR THE VIDEO AND THE VALUABLE INFO. MY SITUATION CANNOT BE A BROKEN WIRE, BUT IT COULD BE THE RELAY. OR, IT COULD BE THE FUSE BOX ALL TOGETHER. MY WIPERS GO KOOKOO AT TIMES WHEN IT RAINS, AND MY MOON -ROOF ONCE GOT STOCKED CRACK OPEN FOR A FEW DAYS. CADILLAC SRX, 2012. FWD.
👍🏻 I hope you can figure it out.
How can I get your shop number to speak to you directly?
thanks i have the same problem you saved me hours thank you
Glad I could help. It took me a long time to find this. I was watching all the other TH-cam videos and kept going back to the fuse block or ignition switch
Hey can you get me the pdf wiring of 5.3 ppv tahoe diagram from All data? I have the same code.
Your audio needs help bro! Good video. I love your honesty! I am Subscribed!
Thanks for the feedback. I am working on getting a better mic setup.
The wires cut off down the sect
So replace the pink wire?
It could be a few different wires. The fuse block is also common failure point on these.
💪🏿
Thank you!!
Having this problem with my 06 SS just turns off randomly then wont start. Till about a day or 2 later.
I have same problem with my SS 2007 any suggestions please thank you
@@r.velasco6896 it's the fuze box motherboard when it gets hot it shuts the engine off till it cools down then you'll be able to start it again a day or 2 later till it overheats again. The guy who bought mines not too long ago knew exactly what it was. 🤷🏿 put his in from his old ss that he blew the engine on & drove off. Hasnt had a problem since. So buy a new fuze box module
@@r.velasco6896mine is giving me this problem now code p1682
Hey man thanks a lot
Nice 👍
Thanks man.
I need to know about my car g6 2007
I wish I could help you but I don’t know what’s going on with your car.
is it me or was their anything me mentioned that was resolved …. asking from a non mechanical minded woman . ha… i’ve no clue what u finally mentioned to dissolve the problem .
The last 3-4 minutes him putting that jumper wire is the confirmation to the diagnosis that there is a break in a wire. Specifically the wire he bypassed. As well he mentioned the long yellow wire that was broken early on in the video.
You need separate microphone
Yes I do. Coming very soon. This was one of my first videos I put together.
If you can, the Manual book you have for the cold colors I’m trying to find the one for the body frame for the trailblazer mines was cut completely on a deaf and they took my fuse box out. I have every other wires connected. I need to know the codefor the body frame wire bloom 2008 trailblazer