That's a great looking bit of kit :o Looks great, and you made using it look easy peasy (I'm sure its your skillset that makes it looks flawless 🤘) Great review buddy 😎
CoxysPicks It’s a fantastic DD pick, but definitely needed a bit of time to get it working correctly, the Abus 88/50 is one of my favourite locks.😊 Have a great week mate.
chris capune Cheers Chris, it’s amazing the things they can make from those 3D printers now. This is still a really tricky tool to put together. But it will make it easier to pick locks that need tensioning from the bottom of the lock. Have a fantastic week Chris.
Daz Evers it is amazing!! And yes, it’s tricky to sink the screw barrels. But a somewhat cheaper option then the metal ones. Have a great week my friend!! 👍🐈👍👏🐾
Super and honest review Daz. Love watching you pick. Great job! Yes pretty pricey for a 3d pick I think. I can't afford one right now, not much work going on here. Take care 👍👍👍👍🧡
Rook Knight Thanks mate, the Abus plus cores are fantastic to pick, you should have a go, they can easily be picked using top & bottom tensioning. You to have a fantastic week.
Those silver bullets are still really nice picks. The aluminum one is also really nice, but really expensive at around $350 USD. Wonderful picking Daz!
PurpleSkull They are really cool, but like you say very expensive, $350 probably isn’t to bad for a locksmith but not for us locksporters. Have a fantastic week my friend.
Thank you for your insight into this Daz. I’ve been considering buying this. I will probably turn up my own. It’s a shame they don’t sell the tips separately. Have a great week my friend. 👍👍
wez picks You will do a lot better making one from Alu or Brass, the feedback you’ll get will be a lot better. I agree if they sold the tips separately it would be great. You to have a fantastic week mate.
Max Grant ,The Swan Valley Machine Shop. 😊 Cheers Max, it’s. Amazing what people can make with a 3D printer now. This is why I’m getting a lathe so I make a similar one from Brass or Alu. Your Channel teaches me loads 😊 Have a fantastic week Max
Yes it's much cheaper than the original silver bullet but it does seem very expensive for plastic. Q: Why is the tensioning tip so chucky on the DD picks that tension at the back of the lock? Great video by the way, you picked the Abus with ease.
Roy Sammons It’s to expensive especially as the 3D printed parts aren’t very well finished. So basically it’s costing $100 for the tip & tensioner. They are very good. The rear tensioner need to sit in the bottom of the lock & pick up the last disc. They actually make two other ones as well. Both bigger than this one.
James Randolph I think as long as the picking & tensioner tips are of a high quality you will be fine, the silver bullet is a great tool. I’d really recommend the Abus plus locks to pick as well they are fantastic. Have a great week.
I feel it’s over priced but hard to know. I look forward to what Sparrows comes out with because their prices are always so good. Guess we’ll have to see how it goes.
Albert Lebel I Would agree with you Albert, even though the pick tip & tensioner are fantastic. I’m still really looking forward to the New Sparrows DD pick to go on sale. 😊 Have a fantastic week mate.
@@dazevers I was shocked when you said the price. I was under the impression these plastic ones would be very cheap. I'm not sure it makes sense to do this but maybe it will open doors for them to do something epic later.
BlackDolphin90 Cheers mate, Absolutely very easily, I will make some tip & tensioner for it, & demonstrate that it will work equally as well, Have a great week.
@@dazevers I have a few extra tips so I might try play around and see if I can do something similar. Are you able to mount those pick tips on the handles of the Chinese rear tension tool handle?
Keymaster Thanks mate. Disc detainer locks are amazing fun. This DD pick is definitely a challenge to assemble. & not a cheap toy. Have a fantastic week Keymaster.
The crappy Lockpicker It definitely a bit fiddly to get right, but worth the time as the picking tip & tensioner are amazing, the Abus plus cores are awesome locks to pick, & can be picked from both top & bottom tensioning. You should try one.👍 Have a great week mate.
Ouch! That price tag for something that looked that rough, I wouldn't have been an happy bunny too! Self assembly is not a good thing especially if it involves heating up metal to fit in plastic parts. If they're confident in their product then it should come as assembled. Just my thoughts. Great review Daz ;-)
Plug4uk I do agree, plus I had to pay the import tax £21 that hurt.... if it wasn’t for the tip being as good as it is, it would definitely have gone back. Its a pretty difficult tool to build as well.😩 Plus side it definitely made picking the Abus in a double quick time. 😊 Have a great week mate. 👍
@@dazevers : I got stung like that on some bits from Sparrows (not their fault I hasten to add) it was our end with customs and delivery, bloody rip-off merchants! I think you did a great job in picking that lock my friend and you also have a great one, take care ;-)
Great video mate and picking. I wouldn’t pay 100 for that pick. Why does it not come ready built! I like the idea with it but you shouldn’t have to be heating up plastic if the screw doesn’t go in right. Any picking tool should just click in to place that’s why you pay good money for a nice tool. Did you pay for that or did they send you one. Thanks for the video my friend 👍🏻
Chris Evans Lock Picking Hi Chris, $100 is a lot of money, & it is very fiddly to build, I just liked the idea of it, as a Locksport toy, in the real world this wouldn’t last the day. They don’t come pre make because they are so fiddly to build, they would probably only get one built at day.😂😂😂
@@dazevers : Daz mate, this is the site that I looked at and your correct, they quote "Planned to come out a little after the DIY kit when I have the time to assemble and test" $150.00 lockfall.com/
Great review Daz, especially your tips at the end for real-world working with it, adjusting it, etc. You didn’t put a link in the description and to took me a bit of work to figure out, for a while I thought you said lockform, then locktool, finally I figured out (duh) that you were saying lockfall.com (Hux’s site). Glad to know the 3D version is an official knock-off rather than someone ripping him off 😁 But after your review it sounds like maybe it’s better to save that money toward the metal one. Thanks again for posting this! 👏
Chirael Hi mate. This tool definitely take some time to assemble. But if you put the time into it, the tool works pretty well. Of course if you’ve got the money to spend on the metal Version it will be a lot better, & easier to use. It’s a good locksport fun tool, I’ve used it many time to open locks that I wouldn’t have been able to open with out it. Thanks for stopping by my friend & have a fantastic week. 👍
@@dazevers Hello friend of the game, I have never manipulated cylinders with disc .. As soon as I have time I buy it .. We in Italy all at home for the virus ..💪😷😷😷
So, I buggered up my assembly. I cant get the two plastic bits straight, there is friction and rubbing and it is a disaster. Spent hours with it and cant get it to work :( That is all me, though, not a problem with the tool !!
TonyS Locks Hi Tony, it really isn’t an easy tool to put together, but if you have the brass inserts in the right place & square you should be fine. I found the all the excess plastic needs to be removed or it just won’t work. It must have taken me a good few hours. Flattening the tensioner rod really helped & also waxing the two parts after sanding them smooth. But $100 plus postage then hours of work to get it working 🙁 I hope you get your working ok.
@@dazevers thanks for the encouragement ! I am very happy with the picking tips, and am currently waiting on a friend of mine who has offered to make an aluminium body to replace the 3d printed one. If all else fails I will take the 3d body to Bristol in may, as Hux will be there and will surely lend a hand !
TonyS Locks I’m going to Bristol this year as well. If you find someone that will make the body’s from Aluminium or Brass I’d love to have one made as well.
Locks great Daz, first one I’ve seen on TH-cam too. I’m sure it works better in your hands than most! 👍😃
Easy work on the ABUS... great review Daz 👍...
Dave Prettejohns Those Abus plus cores are fantastic to pick, definitely a bit easier with this pick. Have a fantastic week Dave.
You have very quickly become a DD master! Great picking at usual!!
Gordon W Thanks Gordon, they are so much fun to open. Have a fantastic week mate.
Perfect audio! Nice tool!
crowley357 Thanks mate, I really appreciate your help & advice. Have a great week.
That's a great looking bit of kit :o Looks great, and you made using it look easy peasy (I'm sure its your skillset that makes it looks flawless 🤘) Great review buddy 😎
CoxysPicks It’s a fantastic DD pick, but definitely needed a bit of time to get it working correctly, the Abus 88/50 is one of my favourite locks.😊
Have a great week mate.
Great seller 😀
And great information On how to get the most out of the tool!!!
Thank you for sharing this!!
👍🐈👍👏🐾
chris capune Cheers Chris, it’s amazing the things they can make from those 3D printers now. This is still a really tricky tool to put together. But it will make it easier to pick locks that need tensioning from the bottom of the lock.
Have a fantastic week Chris.
Daz Evers it is amazing!!
And yes, it’s tricky to sink the screw barrels.
But a somewhat cheaper option then the metal ones.
Have a great week my friend!!
👍🐈👍👏🐾
Very nice video my friend Daz 👍
Beautiful job ... Have a great weekend.
BilLVeR Καθημερινές αποδράσεις Thanks mate. This was a fun one to make. Have a great week. 😎👍
Super and honest review Daz.
Love watching you pick. Great job!
Yes pretty pricey for a 3d pick I think.
I can't afford one right now, not much work going on here.
Take care 👍👍👍👍🧡
another fantastic video Daz mate very cool have a great week mate👊😊🇬🇧😎👍
Leon's lockpad Thanks mate. I really appreciate it. You to have a fantastic week.
Very cool, and WOW you make that look easy. Hope your weekend is going well 👍🔓
Rook Knight Thanks mate, the Abus plus cores are fantastic to pick, you should have a go, they can easily be picked using top & bottom tensioning. You to have a fantastic week.
Those silver bullets are still really nice picks. The aluminum one is also really nice, but really expensive at around $350 USD. Wonderful picking Daz!
PurpleSkull They are really cool, but like you say very expensive, $350 probably isn’t to bad for a locksmith but not for us locksporters.
Have a fantastic week my friend.
Thank you for your insight into this Daz.
I’ve been considering buying this.
I will probably turn up my own.
It’s a shame they don’t sell the tips separately. Have a great week my friend. 👍👍
wez picks You will do a lot better making one from Alu or Brass, the feedback you’ll get will be a lot better. I agree if they sold the tips separately it would be great.
You to have a fantastic week mate.
Quicker than what i would have been able to do with a Hitachi key ( battery grinder ) !!! Cheers .
Max Grant ,The Swan Valley Machine Shop. 😊 Cheers Max, it’s. Amazing what people can make with a 3D printer now. This is why I’m getting a lathe so I make a similar one from Brass or Alu.
Your Channel teaches me loads 😊
Have a fantastic week Max
Yes it's much cheaper than the original silver bullet but it does seem very expensive for plastic.
Q: Why is the tensioning tip so chucky on the DD picks that tension at the back of the lock?
Great video by the way, you picked the Abus with ease.
Roy Sammons It’s to expensive especially as the 3D printed parts aren’t very well finished. So basically it’s costing $100 for the tip & tensioner. They are very good. The rear tensioner need to sit in the bottom of the lock & pick up the last disc. They actually make two other ones as well. Both bigger than this one.
Roy Sammons p.s it does make picking the Abus a bit easier as well. 😊👍 Have a great week.
Awesome demo mate 👍🏻✌🏻
Pompey Picker Thanks mate. The pick takes a bit of work to assemble, but works well ones it’s done. Have a fantastic week.
Nice work Daz 👍🏻
Law Lock Tools Hi Andy, Cheers mate. It’s really interesting what they can do/make with 3D printers now.
Have a great week.
Wow amazing
It a great alternative to the original silver bullet.
You couldn't have made this video like 2 or 3 day's ago before I ordered my 3D print of another DD pick? Dangit!! Now I have to get this printed too.
James Randolph I think as long as the picking & tensioner tips are of a high quality you will be fine, the silver bullet is a great tool. I’d really recommend the Abus plus locks to pick as well they are fantastic. Have a great week.
@@dazevers I am a DD newbie so thanks for the lock suggestion!
I feel it’s over priced but hard to know. I look forward to what Sparrows comes out with because their prices are always so good. Guess we’ll have to see how it goes.
Albert Lebel I Would agree with you Albert, even though the pick tip & tensioner are fantastic. I’m still really looking forward to the New Sparrows DD pick to go on sale. 😊
Have a fantastic week mate.
@@dazevers I was shocked when you said the price. I was under the impression these plastic ones would be very cheap. I'm not sure it makes sense to do this but maybe it will open doors for them to do something epic later.
Nice absolutely honest review and feedback. It is a rear tension pick...you think it is possible to pick front tension locks with it?
BlackDolphin90 Cheers mate, Absolutely very easily, I will make some tip & tensioner for it, & demonstrate that it will work equally as well, Have a great week.
@@dazevers I have a few extra tips so I might try play around and see if I can do something similar. Are you able to mount those pick tips on the handles of the Chinese rear tension tool handle?
BlackDolphin90 Send me an email, & I will forward you the drawings/ pictures of the one I made, that can do both.
d1everslocksport@gmail.com
Great video, your DD picking is next level! I know I would botch the assembling, it would be a wasteof 100💵😂😅
Keymaster Thanks mate. Disc detainer locks are amazing fun. This DD pick is definitely a challenge to assemble. & not a cheap toy.
Have a fantastic week Keymaster.
Great review Daz I’m not sure I’d get it together correctly needs to be idiot proof lol you smashed the Abus with it 👍🏻
The crappy Lockpicker It definitely a bit fiddly to get right, but worth the time as the picking tip & tensioner are amazing, the Abus plus cores are awesome locks to pick, & can be picked from both top & bottom tensioning. You should try one.👍
Have a great week mate.
Ouch! That price tag for something that looked that rough, I wouldn't have been an happy bunny too!
Self assembly is not a good thing especially if it involves heating up metal to fit in plastic parts. If they're confident in their product then it should come as assembled. Just my thoughts.
Great review Daz ;-)
I totally agree. Considering how much self assembly has to be done and a process of having to heat up a part Hmmmm way over priced.
Plug4uk I do agree, plus I had to pay the import tax £21 that hurt.... if it wasn’t for the tip being as good as it is, it would definitely have gone back. Its a pretty difficult tool to build as well.😩
Plus side it definitely made picking the Abus in a double quick time. 😊
Have a great week mate. 👍
I thought the price sounded a little high too.
@@dazevers : I got stung like that on some bits from Sparrows (not their fault I hasten to add) it was our end with customs and delivery, bloody rip-off merchants!
I think you did a great job in picking that lock my friend and you also have a great one, take care ;-)
Great video mate and picking. I wouldn’t pay 100 for that pick. Why does it not come ready built! I like the idea with it but you shouldn’t have to be heating up plastic if the screw doesn’t go in right. Any picking tool should just click in to place that’s why you pay good money for a nice tool. Did you pay for that or did they send you one. Thanks for the video my friend 👍🏻
Apparently you can purchase one assembled off their site at extra cost. Hmmmm ;-)
Chris Evans Lock Picking Hi Chris, $100 is a lot of money, & it is very fiddly to build, I just liked the idea of it, as a Locksport toy, in the real world this wouldn’t last the day. They don’t come pre make because they are so fiddly to build, they would probably only get one built at day.😂😂😂
@@dazevers : Daz mate, this is the site that I looked at and your correct, they quote "Planned to come out a little after the DIY kit when I have the time to assemble and test" $150.00 lockfall.com/
Great review Daz, especially your tips at the end for real-world working with it, adjusting it, etc. You didn’t put a link in the description and to took me a bit of work to figure out, for a while I thought you said lockform, then locktool, finally I figured out (duh) that you were saying lockfall.com (Hux’s site). Glad to know the 3D version is an official knock-off rather than someone ripping him off 😁 But after your review it sounds like maybe it’s better to save that money toward the metal one. Thanks again for posting this! 👏
Chirael Hi mate. This tool definitely take some time to assemble. But if you put the time into it, the tool works pretty well. Of course if you’ve got the money to spend on the metal Version it will be a lot better, & easier to use. It’s a good locksport fun tool, I’ve used it many time to open locks that I wouldn’t have been able to open with out it. Thanks for stopping by my friend & have a fantastic week. 👍
stl files at yeggi?
Buongiorno amico ottimo lavoro, molto bella questa morsa..
Mi piacerebbe molto questo attrezzo, dove acquistarlo? Ci sono molti siti e un casino.. 👍💪
lockfall.com/
@@TonySLocks 👍💯
Ant-Zac lockpicking Independent It is a bit tricky to put together. But once it is done, it works very well. Have a fantastic week.
@@dazevers Hello friend of the game, I have never manipulated cylinders with disc .. As soon as I have time I buy it .. We in Italy all at home for the virus ..💪😷😷😷
wow cool
Schrödi FPV Cheers mate , have a fantastic week.
Is that 3D printed metal or is it just plastic that looks like metal on a small screen?
Daniel Jaworski This one is plastic, but it would be so cool if it was 3D printed metal. 👍
@@dazevers Then it looks like a really nice print because I couldn't tell that it wasn't metal in your video.
So, I buggered up my assembly.
I cant get the two plastic bits straight, there is friction and rubbing and it is a disaster.
Spent hours with it and cant get it to work :(
That is all me, though, not a problem with the tool !!
TonyS Locks Hi Tony, it really isn’t an easy tool to put together, but if you have the brass inserts in the right place & square you should be fine. I found the all the excess plastic needs to be removed or it just won’t work. It must have taken me a good few hours. Flattening the tensioner rod really helped & also waxing the two parts after sanding them smooth.
But $100 plus postage then hours of work to get it working 🙁
I hope you get your working ok.
@@dazevers thanks for the encouragement ! I am very happy with the picking tips, and am currently waiting on a friend of mine who has offered to make an aluminium body to replace the 3d printed one. If all else fails I will take the 3d body to Bristol in may, as Hux will be there and will surely lend a hand !
TonyS Locks I’m going to Bristol this year as well. If you find someone that will make the body’s from Aluminium or Brass I’d love to have one made as well.
@@dazevers let's see how it develops
I think it's overpriced, easy overpriced considering how much work has to go into the assembly.