Bmw "TPMS" Tire pressure light reset
ฝัง
- เผยแพร่เมื่อ 15 ม.ค. 2017
- Easy fix for your annoying tpms light.
Don't forget to subscribe
Don't forget to subscribe and check us out on
Facebook : / bmwdoctor1
Instagram : bmwdocatx?...
Website : www.bmwdoc.weebly.com
Disclaimer:
Due to factors beyond the control of TheBMWdoctor , I cannot guarantee against improper use or unauthorized modifications of this information. TheBMWdoctor assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. TheBMWdoctor recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of TheBMWdoctor , no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TheBMWdoctor . - ยานยนต์และพาหนะ
![THE TOYS x NONT TANONT - ดอกไม้ที่รอฝน (spring) [Official MV]](http://i.ytimg.com/vi/pPa1d5cC8M4/mqdefault.jpg)
Thank you for this. I just bought a 2010 328i and it has aftermarket rims and tires. The pressure light is on. I will give this a shot.
Good luck!
Thank you for sharing!!!!
thank you your a legend
Hey , can you tell me how to put my 535i in leaning mode for the EL-50448 TIRE SENSOR please..
Can you do it for the 2010 528i 5 series
Hi,
Do you have to press and hold the BC button until the screen is back to the main menu then release? Thx!
Yes, HOLD until Check Sign Pops Up Next To Reset Letters. Did Mine Just Now
I have a 2011 E92. I have an inactive TPMS. I replaced the Controller antenna but I still have an error. Does the new TPMS antenna / controller need to be programed to the car?
The receiver never fails in my experience it's always the sensor in the wheel
My 2008 328i has an inactive message, went to a tire shop and all sensors on tires are good, could it be the tpms antenna or the tpms transponder?
Most likely tpms sensor
So if I Change it and rest it it’ll be fine?
Will this method work if im buying 4 new different tpms sensors ?
this is the answer i need since i have the same question, my guessing is yes but i would like to know as well
Yes it would help. Once u replace all 4 then go in the idrive setting and reset everything. You should b good to go i replaced one of my bad sensor tpms sensor total price was $65
I reset everything and tire pressure is good sensors are good, tire shop scan the sensors they say they are good then when i reset on idrive it goes away but after like a day when i reset it, the tpms malfunction light comes out it flashes like 1 min and stays solid lit. Any idea what can it be im guessing it could be the RCD the antenna that is not given out the signals.... any help would be appreciated.
Same thing happens to mine after “resetting” in iDrive. I’m going to check if the module under the spare is water damaged.
I fix mine, it turns out to be a bad tire sensor. I replace it and total cost was $65
I’ve got a 2010 e93 any tips bc I don’t think I can access these menus this way
do you have an IDrive?
Not too sure I got the Msport package on it so I have navigation and other nice little bells and whistles however for me it keeps saying that it’s inactive so maybe the battery on the sensors might be off?? Any help is appreciated
I just got a 2011 bmw 328i and when i brought it the check engine light wasn't on or the tire pressure. The break light was already on. He told me it probably needs breaks but it stops good like really good. Any advice?
Ideally you’d need to scan the abs module for codes and see which brake sensor is out, but if you don’t have the means to scan it, you can remove the front driver and rear passenger wheels then inspect the sensors for damage. I think that you’ll find that the pads are gone which means that you’ll need pads, rotors and sensors or just the sensors if the pads are in good shape. Good luck
My 2009 328i Xdrive e90 doesn’t give me the Tmps option on my dashboard can you help me out with that? Please and thank you
Tury Betancourt fr, I’m having that problem in mine rn
TallGuyTy any solution?
U can do it on the screen if your car has the navigation system.
Hello, so i got brand new wheels and tires for my 08 328i. Got all 4 brand new tpms sensor, i try doing this and it says reset so i click reset then it says resetting and i wait and wait and nothing happens and the light is still on, but when i go to try it again after driving for a while it will say inactive, idk whats going on, but we programmed the sensors and everything and the light is still on
your sensors are incompatible. I've experienced this problem with aftermarket sensors, they should not need to be programmed just installed, you drive the car for a several hundred feet and the TPMS light should go away.
@@BimmerAutomotiveEngineering thanks for reaching out, they are actually from advance auto shrader brand, my stepdad owns his own mechanic shop and installed them. What do u suggest i do to get the light off? Should i take the fuse out for the tpms light so it goes off
@@simplytheandersons regardless they may not be compatible. I'd follow the steps on the video and if the problem persists then I'd replace the sensors. These sensors have specific frequencies and if they don't match the car's receiver won't be able to detect them. I'd call the dealer and get the part # based on your vin then search the web for that specific part #. Good luck!
I take. Tha air pressure of all 4 tires which is from 32 in tha back is 38 bt I did tha PB bottom and I did it with tha I drive and still said is is not reset
It's a bad tpm sensor. I'd have a tire shop check and replace the faulty one.
Thsi will work on x5 09 BMW
It should be the same and you can even do it through the iDrive if you got one.
How you get that service engine soon light off ??
Scan for codes and post them here so I can help you
I cannot find this option
Mine doesn’t show tpms it shows the display
Hi what if it says inactive? I recently got new tires and it’s blinking when I first put it on and when I go to reset it it just says inactive
It's sounds like you may have one or more defective tpm sensors.
What about if it doent get rest and it says inactive
Typically it's a bad tpm sensor. A tire shop could scan your tires and see which one is faulty.
where do you toggle down? that would have been great to show
Watch the video bud I definitely show it.
hi
how did you do the software update? please help :)
With a high end scan tool or INPA software. Not sure how that works but there are plenty of videos on here about it. Good luck
Mine just reads "inactive" when I choose reset. Any idea why?
It could be a number of things. Start by scanning your TPMS module with a specialty scan tool and go from there.
@@BimmerAutomotiveEngineering thanks for the reply. Turns out I needed to reset it when stopped.
@@BimmerAutomotiveEngineering I just had this inactive issue and I got a new tpms module from bmw dealer n tru yo reset n still says inactive
@@evanwilliams2602 its probably a bad tpm sensor. I'd have a tire shop check and replace the faulty one.
I dont have that option on my e90 335xi 2008
You can still reset it through your instrument cluster.
Same here
My saids inactive ??
Faulty sensor
2013 335i here when i’m scrolling through the options and find TPS it does not say reset
The car has to be running.
I've tried this,light icon still there.
Probably a faulty sensor
how do i deactivate my light?
You can test your instrument cluster. Why are you testing it?
Helppp me with my 535xi please
What's the issue Amanda?
TheBmwDoctor hey. I made sure all the tires are correct and it doesn’t work to reset it like that. I have a 08 528xi
@@djidroneuser5271 it might be a bad tpm sensor.
Will this work on a 2006 X3?
It should be the same.
Can you tell me where is the rdc module located on a 2007 550i bmw?
Mine is still on after all that. Wtf?
you might have a faulty tpm sensor bud. Have tpms scanned and get the codes.
If the menu isn’t coming up turn your car on
It won't if the door is open.
Manual transmission I had to had my 2009 running