Its usually considered that a cabinet table saw is difficult to DIY. But you have made it as simple as eating a cookie. Thanks, great video. best wishes from India
Amazing! Can you make a video about making the fance for you table saw and your router table. Both of them looks great and very interesting and precise. Thank you
Thanks for the great inspiration. Looking at doing something like this and there were some very new ideas in this design i had not need in the other ones i have found. Great work
thank you very much for this video is the best of all the homemade saw tables that I saw unfortunately the diagrams are not included it's really the job of professionals, I congratulate you are the best
I want to say that I really like what you've done here. Very smooth and clean and I like the full use of the circular saw instead of being limited by the shoe. As I was watching I had a question pop into my head. Cost. There is a fixed cost in materials and in the Makita saw itself. But there is also the cost of time. I am not sure what the hourly wage is there, but in the little town I'm in folks sound like a three inch drywall screw going into hardwood if you ask more than 25.00 an hour. So, if you figure 250.00 US for the materials and say 16 to 20 hours labor to put it all together-400.00 to 500.00 then your saw cost you 650 to 750. It looks to be a wonderful saw and a pleasure to use and one cannot discount the joy of building it but in terms of going out and getting paid for work and doing jobs, does one really come out ahead when building their own table saw?
@@VIPhappytree The price in my country for those materials would be super high. Considering what that setup can do, I would see why it would be best to build it myself, but again, the cost would be very high. But thank you for the video :)
글쎄요.. 고물상에 수시로 왔다갔다하며 프로파일하고 50각 파이프는 거의 거져로 가져온거고...(싸이즈에 맞는거 1~2개씩 두어달 모았습니다) 상판18T합판은 재활용이라 구멍이 숭숭 피스자국 잔뜩이고 2x4구조재 5개는 구매했구요 5T알루미늄 상판은 친구 공장에서 받아오고 포터블에 해당하는 심장부 박스 부분은 원형톱 및 톱날 제외하고 부품이 팔만원이 안되는걸로 기억 합니다 금액산출이 않되네요....
Its usually considered that a cabinet table saw is difficult to DIY. But you have made it as simple as eating a cookie. Thanks, great video. best wishes from India
유튜브에서 지금까지 본 table saw DIY 작품 중 최고입니다. 멋집니다.
손재주가 보통이 이니시네요.침만 흘리고 갑니다.
Amazing! Can you make a video about making the fance for you table saw and your router table. Both of them looks great and very interesting and precise. Thank you
Thanks for the great inspiration. Looking at doing something like this and there were some very new ideas in this design i had not need in the other ones i have found. Great work
Thank you.
Very sure this is one of the best idea, i was planning on make a DIY saw table as well.
thank you very much for this video is the best of all the homemade saw tables that I saw
unfortunately the diagrams are not included
it's really the job of professionals, I congratulate you are the best
Congratulations! The best homemade table saw I've seen
Молодец👍 стол получился отличный и многофункциональный 👍
Thank you for providing this video, outstanding workmanship, well done.
Lavoro eccellente. Complimenti vivissimi!
좋은영상 잘 보구 갑니다
Good and succes for father
따라하고싶지만 따라하진 못하겠네요 ㅠ
넘사벽입니다
다만 너무 궁금한것이 있는데요,
이 모델 라이빙나이프를 구할수있나요?
어떻게 장착하셨는지 알려주시면 정말 감사하겠습니다 🙏
만들기 위해 필요한 자재 리스트와 대략적인 부품가들 알 수 있을까요?
Fantastic table saw 💪💪
A question..... What material is the top table? Aluminium or inox?
I want to say that I really like what you've done here. Very smooth and clean and I like the full use of the circular saw instead of being limited by the shoe. As I was watching I had a question pop into my head. Cost. There is a fixed cost in materials and in the Makita saw itself. But there is also the cost of time. I am not sure what the hourly wage is there, but in the little town I'm in folks sound like a three inch drywall screw going into hardwood if you ask more than 25.00 an hour. So, if you figure 250.00 US for the materials and say 16 to 20 hours labor to put it all together-400.00 to 500.00 then your saw cost you 650 to 750. It looks to be a wonderful saw and a pleasure to use and one cannot discount the joy of building it but in terms of going out and getting paid for work and doing jobs, does one really come out ahead when building their own table saw?
Good job
Amazing build... ( INDONESIA ), btw, its the table saw fence very precision or unstable ? Thanks
Se fosse vender esse projeto pronto aqui pro brasil quanto sairia ?
Congratulations! So far you're the best I've seen on TH-cam!
Why not publish your plans in pdf?
Did you do any plans for the jigsaw too?
Thank you.
I did not make a plan.
The plan for the video is all.
I hope you have a look at the video to get another idea.
정말 대단하군요!~ 멋지십니다..
이건 도무지 따라할수 없는 작품입니다. 구경하는걸로... ㅎㅎㅎ
하나씩 하다보면 길이 보입니다....처음부터 용접 생각한건 아니었지만 하다보니 그렇게 되었네요.
Can you share the trunnion plan? It's awesome.
x2
Trunion??? I don't know the word.//
///
There is no plan.
The plan for the video is all.
Trunnion is mechanism for tilting. I see you make a trunnion template on paper when you cut that with router.
Thank you. The plan for the video is all.
@@kupro3738 Wood is not the best material for this element. It will wipe quickly and will not ensure accuracy for longer
Good work!
I'd like to see more about your router lift.
I'll upload a video of the router later.
Is the router lift your own solution?
Do you have a video how the router lift works?
two-year use router lift
I'll upload a video of the router later.
What are the dimensions of the disc?
Amazing !
That's amazing,you're a genius, thanks for sharing - subbed 5⭐'s 👍👍👍
👍👍👍
Hello
Can you Build a one for me with all accesorise and router
can I ask for a detailed plan
Great work. What is the size of the table top (outside dimensions)?
위대한 작품. 테이블 상단 크기 (외부 치수)는 얼마입니까?
1850mmx820mm
Thank you
How much is it?
How can i take planes that. I want to make it
자제 구입은 전체 한국에서 하는겁니까? 그렇다면 저도 꼭 만들어 보고 싶습니다.
네 모두 국내에서 온라인에서 쉽게 구입할수 있습니다.
아저씨요 앵글?각파이프? 사각철물은 어디꺼에요?
프로파일 및 각파이프는 모두 고물상에서 저렴하게 구매했습니다.
Does everything I can ask for
the price this castom table, without makita saw, is roughtly 300$, makita saw 230$ and other (plywood, legs e.t.c) total 550$
The price is low.
Makita saw is used market.
Iron and Profile are purchased at a junk shop.
Buy aluminum from a friend factory
@@VIPhappytree although you got these parts on junk shop, it looks as new))) great job dude!!!
@@VIPhappytree The price in my country for those materials would be super high. Considering what that setup can do, I would see why it would be best to build it myself, but again, the cost would be very high. But thank you for the video :)
👍👍👍👍👍👍👌👌👏👏👏
다이비용은 대략 얼마나 들으셨나요?
글쎄요..
고물상에 수시로 왔다갔다하며 프로파일하고 50각 파이프는 거의 거져로 가져온거고...(싸이즈에 맞는거 1~2개씩 두어달 모았습니다)
상판18T합판은 재활용이라 구멍이 숭숭 피스자국 잔뜩이고
2x4구조재 5개는 구매했구요
5T알루미늄 상판은 친구 공장에서 받아오고
포터블에 해당하는 심장부 박스 부분은
원형톱 및 톱날 제외하고 부품이 팔만원이 안되는걸로 기억 합니다
금액산출이 않되네요....
Parabéns
Здорово.
잘보았습니다.
혹시 파시는건가요?
직접사용하기 위해 만든겁니다.
Great work but you could get rid of the trash music next time, it's unnecessary, natural sound is better,
도면좀주세요
프로파일 크기 알 수 있을까요??
40x80프로파일입니다
상판싸이즈는 1850x820입니다
Идеально!
Круто че.
Приві