How to Replace Fuel Pump & Transfer Unit 2011-2019 Ford Explorer 3.5L

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ib/DEFP...
New Fuel Transfer Unit from 1AAuto.com 1aau.to/ib/DEFS...
This video shows you how to install a new fuel pump & transfer unit from TRQ on your 2011-2019 Ford Explorer (3.5L).
This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/o7w/1AX...
• 10mm Socket 1aau.to/obDH/1A...
• 13mm Socket 1aau.to/ob3q/1A...
• 19mm Socket
• 8mm Socket 1aau.to/obDH/1A...
• Air Blow Gun
• Trim Tool Set 1aau.to/oauE/1A...
• Channel-Lock Pliers 1aau.to/oox/1AX...
• Locking Pliers 1aau.to/oox/1AX...
• Needle nose pliers 1aau.to/oIA/1AX...
• Needle nose pliers 1aau.to/oIA/1AX...
• T45 Driver
• Ratchet 1aau.to/ob5p/1A...
• Socket Extensions 1aau.to/ob3q/1A...
• Swivel
• Torque Wrench 1aau.to/oa75/1A...
• Gloves 1aau.to/oaW4/1A...
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses
• Wire Ties
• Brass Punch
• Chisel 1aau.to/om5/1AX...
• Floor Jack 1aau.to/oauA/1A...
• Hammer
• Jack Stands 1aau.to/oagD/1A...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@nickb4383]

Thanks so much for the detailed video! You guys helped me so many times with my vehicles through your videos. And in the process I’ve found a new passion for working on cars! Thanks TRQ team!

[@timmilus84]

I’m in the middle of this right now and can’t thank you enough for up uploading this video. Only thing I would change is doing the fuel line after removing the evap canister. Then you’re not bumping it, it’s easier to grab and it’ll end up being the last thing before dropping the tank.

[@TRQ]

+@timmilus84 Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@truckerman9836]

Watching this makes me glad I'm not living in the rust belt.

[@buiangbinh4232]

bad design for maintaince

[@hipolitosunda]

Very complex. A job for highly qualified tech professionals.

[@s.v.t-mart2736]

hi, I want to cut the floor to change my gas pump. I would like to know if the pump is on the driver or passenger side? I believe it is on the driver's side

[@buiangbinh4232]

Very Complex

[@mhikeybalatbat]

what is the difference between the fuel pump and the transfer unit? do they have different purposes?

[@jwang3445]

Where is the fuel injection pressure sensor? I didn’t see it in the video clip. The Ford dealer part description said it locates at the fuel tank.

[@jamesharrison1178]

Is this basically the same process for the 2.3 ecoboost?

[@TRQ]

+@jamesharrison1178 This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ

[@jorgevasquez3523]

Mucho problema , mejor cortar el piso menos problema.