Digital Torque Adapter - Turn Ratchet Into Torque Wrench - Full Review
ฝัง
- เผยแพร่เมื่อ 27 พ.ค. 2014
- In this video, I will show you how to use a digital torque adapter with your ratchet and turn it into a torque wrench so you can tighten the bolts on your vehicle.
=======
Buy Digital Torque Adapter
US: amzn.to/3vA14n8
CDN: amzn.to/49jc4mw
Shop For Other Digital Torque Adapter
US: amzn.to/4aeFjZb
CDN: amzn.to/4aeVCoQ
CAR TOOLS:
Torque Wrench:
NEIKO 1/2" Adjustable Torque Wrench (50-250 ft-lb)
US: amzn.to/2Gp1vCH
CDN: amzn.to/2mZ19x7
TEKTON 3/8" Adjustable Torque Wrench (10-80 ft-lb)
US: amzn.to/2xBOAdL
CDN: amzn.to/2Km7mfl
GEARWRENCH 3/8” Adjustable Torque Wrench (30-250 in-lb)
US: amzn.to/2OMMxvo
CDN: amzn.to/3jCp6D1
TEKTON ¼” Adjustable Torque Wrench (10-150 in-lb / 1.1-16.9 Nm)
US: amzn.to/3ARHAqN
CDN: amzn.to/3vu7lMH
Wrench & Sockets:
GearWrench 1/2" Metric Impact Socket Set
US: amzn.to/2pbo6dN
CDN: amzn.to/2lUlHqq
EPAuto 1/4” & 3/8” Socket Set - 69 Pieces
US: amzn.to/2Gnwb7k
CDN: amzn.to/2lp5t8f
3 Pieces ¼” to ½” & 3/8” Socket Adapter
US: amzn.to/3fIid0L
CDN: amzn.to/30oZAIT
TEKTON 30 Pcs Combination Wrench Set - Metric & Imperial
US: amzn.to/2ZJzqhx
CDN: amzn.to/2mZ2dB7
GEARWRENCH Ratcheting Wrench Set 20 pc, SAE/Metric
US: amzn.to/36bV0jB
CDN: amzn.to/2ZfG820
Screwdriver & Pliers:
26PCS Magnetic Screwdriver Set with Case
US: amzn.to/2jMU7KC
CDN: amzn.to/2nwAGag
100-Piece Magnetic Screwdriver Set with Rack
US: amzn.to/2XBN19t
CDN: amzn.to/2m3qw0o
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com/shop/dial2fast
CDN: www.amazon.ca/shop/dial2fast
=======
Support Dial2Fast on Paypal
www.paypal.me/Dial2Fast
Support Dial2Fast on Patreon
/ dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate and Ebay Partner, I earn commissions from qualifying purchases with the links provided here. - แนวปฏิบัติและการใช้ชีวิต
*Good **MyBest.Tools** value compaired to other brands*
Thanks for this great video. I am a DIY and bought one of them. It works just as good as any other torque wrench.
Best HF Digital Torque Adapter tutorial bar none
This adapter reads up closer to 200 but only if you keep going tighter past 147. I got mine up to 180.
Thanks so much. Great review.
I will note that the Amazon reviews show a lot of people with battery failures. The AC Delco unit seems to have more consistently positive reviews.
Thanks man
I have this but got it without Manuel and just looking TH-cam and found yours it looks easy to use and nice
These items are sold everywhere under different brand names. I got the Toolpro version here in Australia and it is exactly the same except the logo on both the adapter and the case. Very handy item for the DYI mechanic.
Any issues with it so far mate?
Looks like a great product.
Thanks for the video.
Best video I've seen on this product. Thank you!
Great instructional. I also like your ratchet wrench, looks like one that may be extended?
Keep it up. Much appreciated!
Very very helpful video! I have been trying to find this type of information for years since I first saw the torque adapter. My next HF order will have this one!
Thanks for your comment. Link in description for Part 2 showing you how to calibrate torque wrench.
Thanks, man! I forget how to use it. I am replacing rotor watching your video at this moment.
Thank you so much for the video. The manual was a bit confusing. It didn't explain what Ptoq or Trace meant
I got this mower specifically to be able to drive it through a 36 inch door th-cam.com/users/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend or gate It is a little tight with the grass deflector installed but has more clearance with the deflector replaced by the recycler/mulcher. This model appears to be popular and a little harder to find for that reason. I can't judge the dependability as I have only mowed the yard twice but everything else on the mower is very nice and working fine so far. I added options for the run hour timer, arm backrests, recycler/mulcher, towing bracket, deck lift assist and cover.
Thank you. Much clearer than the instructions.
Really well done video review. Kudos !
Good review. I note the lowest torque is about 29 ft-lbs, surely that torque applied to a quarter inch drive would cause many breakages or bolt extensions beyond the norm?
Great review. A little input for ya.... Always push down on the torque wrench. Firstly if it helps if anything breaks you won't get a face full of metallic fury and you won't end up punching yourself in the face (go ahead and laugh but I've seen it happen numerous times). It also allows you to control your torque sequence better and makes it easier to torque in one smooth motion. Lastly if allows you to watch the torque meter turn towards you and not away from you as you complete your torquing operation.
i guess im asking randomly but does any of you know a method to log back into an instagram account??
I somehow forgot my account password. I love any assistance you can offer me
@Santino Alessandro Instablaster =)
@Lyric Rylan thanks so much for your reply. I got to the site through google and im trying it out now.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Lyric Rylan It did the trick and I actually got access to my account again. I am so happy:D
Thanks so much you really help me out!
@Santino Alessandro No problem xD
Many many many thanks for posting this tutorial. I bought recently two (1/2 and 3/8 drive with no digital) but can't hear the clicking. The sales people at Harbor Freight DOES NOT KNOW how to operate it. This posting clearly explain in detail how to use digital. I'll buy one ASAP.
Excellent description, thank you, very much...
Very good & informative article 💯, I was thinking about purchasing, I definitely will now...
Best review I have watched on the 68283. I use the 68283 to check and re-calibrate my torque wrenches. Occasionally I will check the 68283's against someone else's torque wrench as a double check.
Thanks for taking the time to show this model torque adapter
stigonutube Glad you found my video. Cheers!
10/10 narrative. Impressive. Thank you very much.
Your video is the best that described how this HF torque works.
Thanks for your comment!
awesome review! thanks so much
Fantastic review, many thanks
can you please do a video explaining the angle function?
Can you use extension or adapters without effecting torque?
thanks again toady. may have to purchase.
Very informative, if we don't have torque wrench then just gentle tight and not lose a bold will work ?
Why didn't youtube recommend this for me 6 years ago, i needed it
Thanks for the detailed review. Could you please test the accuracy at 10 ft lb. I would be really grateful for that bit of information.
Bakanelli minimum torque is 29.5 ft lb. so I guess the manufacturer has considered the lower accuracy at low torque (strain).
Thanks for the video..
Awesome..
I got thr device from a friend with no paper on it..
Your video.helped alot👍
Thanks! I could not quite figure this thing out with the instructions. After adjusting the chain on my sportbike, i want to be darn sure the axle nut is tightened to torque specifications.
Moran.....
Great video , it helps me much
Hi I want to know it also can use counterclockwise rotation I mean if you want to loose the bolt to check torque or it’s only use for tight the bolt (clockwise )
How do you delete the stored values when it gets full?
Good video.
Just watch out for those reflections!😂😂
Can you use it on impact wrench
Can this measure the torque on a rotating shaft??
As I understand from this video, this adapter can be used even from 0nm or 0lb.ft, you would not have just beeping sound and flashing light until 29.5 ft.lb. Is it correct?
How do you change the batteries in this?
Great tutorial!!
How do you have it recalibrated or checked every year or two?
I cannot believe that pressing the wrong couple of buttons would erase the factory settings. That could be done by mistake so easily. If it loses the factory settings, does that negate the usefulness of the tool?
+buddyboy4x44 Yes, without the stored factory calibration, it will no longer be accurate. You can still use it, but just won't know the accuracy.
+dial2fast Thanks for the prompt reply. That amazes me. This is clearly a remarkably good product but that one "flaw" deters me from buying it. The buttons are all small, close together and there are other legitimate double press functions. One wrong move and it loses the one thing it depends on, its accuracy. Thanks for showing it to me. I would have thought that the manufacturers would have had a recessed reset button on the rear, or something like that, like they do on wifi routers.
Amazingly good videos, by the way. I unhesitatingly subscribed.
Just exchange it for a new one.
HF can send it in for recalibration.
customer service told me by doing this is doesn't erase but sets it back to factory specs.
What are "factory specs"?
great tutorial.
Quality manager JACK and inspector Allen. Hahah, yeah sure, must be a common name in China where those are made.
omg lmfao....so true 🤣🤣🤣🤣
Uhm, I happen to know Jack and Allen personally. At the time of their births their Chinese mothers were big fans of Woody Allen and Jack Nicholson movies. How could you make fun of these inspectors who work tirelessly to personally photocopy their signatures to millions of these product certifications?
@Emerald Lx Just curious... on the inspection card, were the test results the same values???
My Mastercraft digital torque adapter have been inspected by Jack and Allen too, but with less accurate results. The inspection have been done 2009 so maybe they improved themselves in 5 years or it's all bogus.
Btw Chinese often have an occidental name on top of their Chinese name.
That Quinn adapter sucks batteries down fast. Two or three days with 5 saves in memory, the batteries give out and makes the adapter blank out randomly or go back to 4.7 lbs. My advise is to take the batteries out every time you throw it in your toolbox. Fresh batteries is a must.
I like this adapter but I was a little taken back when you mentioned that if you press the power and meter button that the factory calibration would be lost.
That comment had me looking for other brand name adapters where that would not be an issue.
Oldnavy It’s not an issue. These units zero out when you power cycle them they work like a digital scale and there is no calibration.
Can this tool be calibrated after some time?
is this tool good? i can find it for 40$ (17-340nm)
i want it mainly for engines assembly
thank you for sharing this video and for taking the time to do the test for us!...now my comment on this: due it is made in china, and i can tell some plastic on it, im not quite sure if this tool is gonna stand during heavy use or if is going to break somehow....i think i rather use a torque wrench instead due to the fact that is all made with metal, no plastic cheap digital stuff
Jorge This is not designed to withstand abuse. It is a precision instrument just like a digital torque wrench that also will not hold up to abuse. Even a cheap style all metal click type torque wrench is not designed to hold up to abuse and a simple drop to the floor could render it ineffective or at minimum, inaccurate. That is why these instruments are typically sold with a sturdy case to protect them from inadvertent abuse or neglect. Certain items in your arsenal worth having are also worth taking care of. And if everything made in China was deemed junk you would have a hard time making it through your daily routine without those “junk” items flooding your life. I.E... your cell phone, car, microwave, toaster, tv and just about everything you own. Speaking on this product alone I personally owned this unit for almost 8 years and it held up incredibly well. The only downfall of this item was the watch style batteries needed to run it and they would not last a long time and constantly needed replacement. Fortunately for you the upgraded version of this exact item is now labeled under the “Quinn” brand and requires AAA batteries. It is the only reason I upgraded and sold the old Pittsburgh branded one I had. And going on two years now with the upgraded version I am confident it will last me a fair amount of years.
Good Job Sir !
Good stuff....thanks.
Great video, so much better than the "translated" instructions that came with it. Thanks
Thanks will be buying one soon:)
Glad you found the video helpful.
Hi Dial2fast,
Just wanted to know your feedback on the battery life poor performance issues as mentioned in some of the comments?
What has been your experience now after more than 2 years since you posted the video?
Thank you in advance.
To be honest, I really don't use it much as I already have 4 torque wrenches which gets used all the time. I got this to just see how well it works, but mine still works fine.
thanks for prompt reply!
Many thanks. I wonder if you could tell me if this digital meter can be used for the very common spark plug thread diameter of 14mm, which requires 18ft-lb or 24.4 Nm. I believe the minimum value on the scale of this device is 42 Nm. I suppose I'd have to use the trace mode you mention and watch the screen, as no lighjt ot alarm would come on I'm sure many do-it-yourself folks chnage spark plugs. Perhaps the main difficulty faced by most laymen is to find out the right torque for this or that.
Yes, spark plugs can be tricky if you have not installed a lot of them before. Both NGK and Denso have an installation procedure on installing spark plugs without the use of torque wrench, but instead use the rotation angle of the spark plug wrench. For your 14mm thread spark plug, you first hand thread the spark plug into the engine with your fingers (and an extension) until it doesn't turn anymore. Then using a regular wrench, you tighten (rotate clockwise) the wrench 180 to 240 degrees (or 1/2 turn to 2/3 turn), and stop. That's it. This is for new plugs. If they are reusing the plugs, then you only tighten to 30 degrees. I know I didn't answer your question on this digital torque adapter, but I would not use it for 18 ft-lbs, unless you have a proper torque wrench.
Very helful, thank you sir.
Why did you put a red tape on your impact socket? Great video and I can't wait for the next torque calibration video
The red tape is just so I can be lazy. LOL This is one I use all the time to remove the wheel. So I just grab this one not having to look at the size.
Great video.
Whats the lowest it will reach?
Thank you ALL who commented on the "battery issue"; I returned two of these because of the "LO" warning after only a couple of minutes use! I may get another one now that I realize that it wasn't just me! Will use the battery removal 'trick" ! MJ who commented that the HF adapter "EATS" batteries is right on point!!!! Thank you to all, very helpful comments.
what's the trick mine is doing the same
I'm having this "LO" issue also. Can you elaborate?
I have a different brand of digital torque adapter like this, and I found there was a problem with the way mine was soldered, causing the battery to intermittently get shorted against a sharp solder joint peak after it poked through a thin piece of insulation. As I was torquing with it, the display would sometimes suddenly go out, making it fairly useless.
I was able to fix it by reflowing the solder and no more issues. Possibly may be something similar with the HF ones.
Many digital items nowadays have a parasitic draw which kills batteries in no time at all. Even though shut off the battery is still drained. I cannot say that this particular item has that problem, but it is something to keep in mind.
Thank you for video, just got mine and didn't know how to use it, was to lazy to read manual. 😊
Dose it need recalibration after a while?How to adjust calibration on it?
No it's digital
Great video - save me from reading the manual. Thanks.
Hi, is it still working fine today?
Hi dial2fast, nice video can you please answer a question?. I just got one of these and I am worried that I pressed the M button and the power button by accident as I was switching it on, since you say this will erase he factory settings and accuracy how can I know if I did in fact do this. I would really appreciate your assistance. I also have now begun to get the LO in the display at torque values higher than about 80lbs.ft. I assume this means that the battery is loosing power. Gerry (in the UK)
+Gerry Brown Since I have not factory reset the device myself, I really don't know if the unit looks (work) any different. But that's quite a combination of buttons to push to have accidentally hit those exact buttons.. Perhaps you didn't reset the unit. Try comparing it to a known good torque wrench if you have one.
When I press the "memory" and "peak/trace" buttons together it just goes into the memory saving mode and does not change the unit.
I am interested in an adapter similar to this one. Can you use it to measure the torque of screws already tightened? What I mean is use Peak/Top mod and use it for unscrewing.
Other videos show this is possible when on Trace mode, not when unscrewing though. Wonder why Dail2fast omits that in his video. Rather his explanation about Trace mode is different. Wouldn't trace mode be to 'trace' something (existing torque in this case) like other youtubers show?
in-lbf?
Does this work for inch lbs?
hello,i would like to know the max and the min torque that we can apply please.thank you
No thanks. Im not your personal Google.
So, can i use this when i torque wheel lug nuts (80ft/lb) instead of a regular torque wrench?
Yes, you use this if you don't have a torque wrench.
I keep seeing videos that say pressing the power and memory buttons at the same time will erase the calibration. I downloaded the manual to see what that's about before I buy one.
It says that action will calibrate the tool and alter preset values. I take that to mean that it goes back to factory settings and erases what you have stored in the memory? I'm not sure. I'd like to see somebody press the buttons and test it in a video.
Idem.
I did not find the information I was looking for. When I use my torque adapter it beeps repeatedly, but never goes to solid tone, but it displays "LOW" and flashes till it powers down. What is up?
Scott NicewongerSr low battery?
I've tried two of these and they both did the same thing even with new batteries. I took the second one back and never tried again. Maybe just a bad batch?
Can We save the data of check /verificatian..?
I will use this for verification click wrench ( Taking CP/CPK)
The 'M' button is to store the reading in memory.
Do these adaptors come in 3/4 inch drive with a capacity of say 250 ft/lb?
Did you not watch the video? Does your Google not work? Are your fingers broken?
Good Vid. Man!!
Whats the max lbs?
works with a impact drill?
Impact drills are for removing. Not installing.
Bought a 68283. Love the concept, I set the target torque to 100 lb-ft. After pulling to target a few times, maybe 10, the display flashes "LO" and the unit shuts off. If i immediately turn it back on It will flash "LO" each time I pull And then turn off. I took the first one back. The Harbor Freight Tech line has no idea. Any idea what's up?
+Pat Fletter I had the same problem. The first one I got did the same thing; also, it flashed/beeped at different torque values, so therefore defective. BUT, the "LO" message means the battery is low(see instructions). I returned it, got a replacement. Torque values are constant, so not defective. BUT, it does the same thing with the batteries; These things don't last for 110 hours as the instruction say; more like 11 minutes!!!! Knowing that, I like the unit, I just take the battery out right after using it, I don't store it with the batteries in it, and install the battery again just before using it. Yes it's a PITA, but WAY cheaper than a $250+ digital critter from another manufacturer. And I can use it to calibrate and reset my other "click" torque wrenches. Cheers.
@@mikejaureguy2648 I bought the same thing a few years ago, with the same battery drain problem. So I opened it up, turns out the underside of the battery connector came in contact with the main shaft of the tool, thus shorting out the battery, draining it almost instantly. The fix is very simple, put a piece of electrical tape over the contacts, done!!! Here is a picture of what I'm talking about, you can see some exposed metal contacts. photos.app.goo.gl/APM8RB2LexUKpezJ6
Mine is only good for 29 to 256 ft lb i have the harbor freight new Quinn model which it doesn't look any new or different from your unit.
Hi, does it measure torque in anti-clockwise direction?
Probably
nice video, I just bought it and I set it to 47 ft lb, and it beeps at 38. I turn it very slow, so it is off big time, not to mention it is off compared to two other manual torque wrenches.
+NoShadowOfDoubt1 Return it, maybe you just got a bad one.
+jewllake the first purchase from HF and it was returned.
+NoShadowOfDoubt1 I don't pay attention to the beeps. They come on early as a warning, then steady at the set value. I just use the digital readout instead. I returned my first one due to inconsistent values; the second one was consistent. It just EATS batteries if you leave them installed. I remove/install right before/after using it. Regards.
+Mike Jaureguy , thanks for the reply, I will probably try AC Delco next..
i want to buy this....but does it require maintenance? like a normal torque wrench you need to lubricate it from time to time
There is no maintenance. Just don't drop it or abuse it.
Not only inspected but certificated as well...
Can you use that with impact wrench
No
great video thanks the spec stated only gets torque from 25 to 145 ft lb. I need a 18 ft lb would this still work ????????
Sorry it will not.
+john chan It will show a value when you reach that torque; but not to the stated accuracy specs. Its in the instructions.
how about 9 NM ?
does it work with left hand threads?
dial2fast
It measures in both directions.
Can i still use this with an impact gun
No
"Jack" is involved in nearly every inspection.
My father speaks wonders about this and I’m not sure what I do wrong. I never get it to beep. It simply gets to a point where it won’t tighten any further, yet the screen doesn’t reach the number I have set. Yet in all bolts I need to get situated it hits a point where none will tighten. So at this point I’m not even sure my bolts are where they need to be
try it in cold weather and see how good it is
Brian Holmes they work I have one I fix car on winter and I do my job great with no problem
What's the lowest torque setting?
Sal Delacruz 30 ft lb
Can this be used on left hand threads?
No you cannot.
thanks
Is it self calibrating?
No, it's calibrated from the factory.
ty guy help me to know how to us it
Thx
Did you notice there seems to be no flashing Yellow LED at all?
This is very different than as described by the almost useless HF instruction (they say there should be a Yellow).
Also, battery removal in the HF instructions doesn't seem to match with the reality of the hardware, either.
Maybe sometime later you could explain how to change the battery.
Your video is great, though!
Very clear and informative.
thank you
I don't think there was a yellow LED also. Besides some of the minor things, its a good device.
+pee cee Mine does have the yellow light. However, I find it best to apply torque slowly and gently until the desired reading appears on the dial, for the greatest accuracy. Additionally, the battery change is accomplished vial 4 small phillips head screws on the back as per the instructions. It really eats up batteries, so I remove/install the battery right after/before using the device. Nice deal at the price, and a LIFETIME warranty!!!!! Regards
Any bets that it works in the same way digital calipers do, only turning off the display!