How Expert Welders Build a Heavy-Duty Excavator Bucket Out of LNG Ship High Strength Steel Plate
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- How Expert Welders Build a Heavy-Duty Excavator Bucket Out of LNG Ship High Strength Steel Plate
#excavatorbucketmaking #excavatorbucketproduction #welding #fabrication #howtomakeexcavatorbucket
Those eye protection techniques are next level, the hand-shield technique, the look away technique, and my favourite the peek-a-boo face shield technique. This is what safety looked like in the USA 100 years ago.
Don't forget how much effort the US is putting into keeping these guys in the Stone Age for as long as possible.
LMAO!! LOSER!!!@@alldifficult
@@alldifficult yeah it's the US's fault...lol
@@Felorn6863369 1+1=2. Lol
People are cheap and expendable in most of the world
I can't believe that bucket would last five minutes digging anything but mud. They didn't bevel their butt welds, they didn't grind off paint, rust, slag, dirt, etc. before welding, their long welds were more or less a group of spot welds instead of a stabilised, continuous and even weld, etc., etc.. This video should be shown in welding classes as an example of what NOT to do.
Don't be to critical on them, their the reason Richie Brothers auction has something to sell.
let alone the steel they use, mild steel instead of carbon steel for machinery.
All the digging is in sand.
people need cheap ass buckets, too. I bet you can buy like ten of those for the price of a JCB or CAT bucket of the same size. Life of the machine comes into play, too. If its like 8000 hours on it not gonna drop some nice new bucket made of high quality shit.
@@Freecomments4u There are more choices than a dirt cheap piece of crap or a brand new name brand.
I was waiting for the expert welder part.
Ну вы, ребята, даёте! Здорово! 👍👍👍
cm precision work right there, not that high precision is called for on all the stages. Some impressive work with the blowtorch, especially the first guy doing freehand cuts through 3 cm plate. Extremely skillful work. If I had a real complaint, it would be the lack of cleaning the metal before welding, and the lack of safety.
They do what they must to provide for their family.
It would have been nice to see a bevel cut here or there with some of those critical joints. But you gotta have customers soo don't build it too well. They'll need repairs down the road. Once a customer, always a customer.
WHEN JOINING THICK METALS BY WELDING, THEY CANNOT BE WELDED BY GLUING THEM SIDE BY SIDE.THE JOINT MUST BE THINENED AND FILLED WITH WELDING WHEN GRINDING IS PERFORMED, THE WELD IS THINNER
Nobody teaches them. Its the 3rd world of dirt & blood.
Tutup samping sudah dimal kertas tidak ada gunanya...😂😂😊
Nice to see everyone wearing their safety sandals👌
@@kiiiiiiiiiiiiiiiiiiiii Thanks for watching watching 🙌
47:35.........wait for it.
The guy with the cut off torch is an absolute master at it... very clean cuts and no huge blobs sticking underneath
❤❤❤❤❤
It's 3/8 mild steel, you could cut through that with a butter knife!
my thought exactly, thats the only good thing i can see in this video lmfaoaoao. the rest of it is fucking abysmal
Safety out the window!
100% penetration out the window!
Nice work tho.
레이저 로 재단 하면 편한데 😢
got to love how they poising them self's with the paint from the ship steel just to make some other guy rich
These young boys that are welding without a Welding Shields will be BLIND by the time they get to 50 years old.
These guys have never heard of safety in their entire career.
They don't even grind off the dirt on the material they just weld not even chamfer the plates before welding. 🤦♂️🤦♂️🤦♂️
Bet min.50% of them have smsrtphone snd yt for safety gear education in sll those millikn videos. But they werent interested in some 20 dollar safety shoes or 5 dollar eye protection. They are going to feel it first when something went wrong!
Not my health..not to have to pay for medical survey if...
I give them a A for effort for using what they got and utilizing it
The guy with the cutting torch is amazing. The rest of them need to buy a Harbor Freight auto darkening welding helmet with the 20% off coupon, wear wooden clogs to cover the toes and some gloves. They are hard workers. Not in a welfare line looking for a handout.
Is this an episode of junk yard wars? i think I miss this one.
Plates should be beveled and cleaned before welding. They'll flex and the welds will break. No welding tracks in wear area to reduce wear on surfaces.
Just my thoughts
@@marcelh85 But then again they are working on less than ideal conditions and all they dig is mostly sand/fine gravel. My hats off to them anyways. All I can do is snot weld.
Did honestly expect them to make a quality product
I’m not really care that much about surface rust or contaminants when using stick welding,But about the plate that need to be beveled? I’m agreed with you,it’ll be whole lot stronger if they beveled it.
Yep does need the bevels, then fill with weld, and just some general grinding/sanding to clear the area being welded from contaminants.
The perfect shoes for heavy steel work especially for welding and grinding.
Whats the problem.. they're safety slippers to go along with the safety squints
Nice to see those fellas have some modern equipment. That CAD system (Cardboard Aided Design) is very good
Homeboy in beginning squats better then my 5 month ofl
I'm guessing all the dirt acts as a UV shield.
Not quiet oem but would build a decent sand castle.
I do see the work is good work for what they have to work with, expert I don't think so
The plate their using was probably an old freighter yesterday 😁
It was! That’s exactly where they get their steel!
Breathing those welding fumes can not be healthy. It is really cool to see a crew make the bucket from scratch, more or less, though. The dirty metal welds drive me nuts haha
PPE, WTF is that ???
Там эти ломастеры на 1000 Вольтах что ли варят, а иначе, как объяснить сварку такого толстого металла без разделки кромок))))))
It is amazing they transition from the hand held welding mask to the, well, 'hand mask'
The repurpose world going strong.
@@aregeebee201I want to know how much hot slag goes between their toes?
Belle réalisation avec peu de moyens bravo
What expert welders?
Steel toe cap sandals
I'm still surprised they have electricity. P.S. those welds are going to break as they have no penetration and a weld groove was never cut.
I have seen better welds from first year welding students. Welding over paint no way those will hold. WHAT A WASTE OF TIME.
Yeah! When I quickly cooled down the v groove welds on my 1/4 inch weld, it held up FAR better than the strength of that bucket!!! And plus, there is a number of problems with this welding including the ones you mentioned and other things!!! MAYBE, if they heated up the separate pieces enough, the weld would have lasted more longer…
I really enjoyed this video. IAM Impressed the way you make the cuts definitely would like to see more of these videos. Thank you for sharing.
They build their bridges and infrastructure with the same skill and techniques .Be fun to watch them dig rock with it.
That bucket will never dig rock
imagine what these guys could build if they had some nice tools and equipment maybe a real welding hood and some boots.
Verdaderamente estos individuos no muestran respeto ni valoran sus vidas trabajan en completa inseguridad primero debería ser sus vida y su salud yo hago este tipo de trabajo pero primero que nada esta mi salud
Those flesh coloured steel toe caps should sell well in the western world
OSHA inspector drop clipboard and manual from violation overload. Then proceeds to have a seizer then they start to wield with out any protective gear.
I too enjoy casual dress-code blacksmithing. What use are toes anyhow?
Was anyone watching this expecting that at the very end that the camera goes to the back of their garage to see some guy smoking a cigarette pedaling a bicycle really fast that’s powering all of this equipment????😂
Сколько не смотрю, сварщик у них уровня Бог!
Oh man I'm not so sure about those welds I don't think they're adequately prepared that's just my opinion, correct me if I'm wrong.
All the proper PPE and clean and safe environments they all work in. Wonder how many years they've had zero work accidents. Oh wait, this guy right here 7:46 must have burned himself with hot slag through his work boots. But good to see the proper grounding to their welding materials. Don't want any potential deadly shocks or anything.
they did it extremly wrong .. Omg 😀This Bucket is gonna be wrecked in one day 😀 ... Welding is horrible.. Materials, what they using is wrong .. Everythink is wrong 😀 But price is low .. so it doesn't matter.
If I leave one sliver of skin uncovered when I'm metalworking I get my ass burned up and these guys work in sandals. Amazing.
The amount of Melanomas from welding UVs must be crazy, not to mention the amount of cataracts they get from welding without proper eye protection.
Notice how all the workers are younger guys. I don't think they last long.
Lots of beggars being trained/ injured/ rejected
Most professional job i have ever seen.
Your joking right?
These are expert welders
@@aregeebee201 of course
Professionals always work Professionally 👍❤
I don't criticize anything they do but the sandals are unacceptable how they don't get burned I don't know
You guys are like building a Canoe with just only an Ax, where Integrity is not an issue, as long as it floats. Tacking 2 thick steel plates without even beveling the sides for sure weld penetration. I am sure that you guys have hand drills that could bore holes for the bolts of the side plate for better fit, but opted not to use it. You have an Angle Grinder so I am sure you have a Hand Drill.
hand drill thru 3cm steel hello?
@@bernardmauge8613 is that impossible? That is not a 3cm steel plate. Besides if you can't, there is a magnetic drill press saying HELLO! In your face.
Sir u are awesome welder and a engineer u do amazing work sir nice 👍👍👍👍👍👍👍💯💯💯💯💯💯
Здраствуйте кол ллеги за ваш высокое уважение !Но сварка изавените плохая ;развалится при хорошей нагруске ' зачем усиления гнуть с газом вроде есть листогибочный станок? Ведь итак после сварки металл в напрежении а вы еще кувалдой ' А вы не с Индии случайно я из России
Походу Пакистан
Great work 💪💪💪👍👍👍
I'm counting toes and fingers of everyone as I watch!!
'Heavy duty'🤣🤣🤣
Well I guess if you ever wondered where scrap cruise ship metal went, here is your answer lol
CSA approved open toes!
Nice job for working in a ditch, although most of it is just glued together as opposed to welded.
For farm trucks sake, buy these guys some eye pro! I can see the rust rings from here. If you lose a toe you can still see and walk, lose an eye you're dinked.
real talk that shit isnt lining up in the field or its tweeked 100 percent without gigs. i guess tolerance is a guesstament
Good work fitting the teet retaining pins. What a bodge job 😂😂😂
I commented on the teeth retaining pins to you don't have to pound them in they should go should go with one hit they were probably upside down
Pls do watch kurtis of cutting edge engineering , you will see the difference..,😂😂😂😂😂
여기파키스탄?
6013 rods for the win!!
Geeze, invest in a good pair of boots.
Most excavator repair shops i know of are cleaner than some high end car mechanics workshops. These guys can't even lay a level concrete floor or find one to work on. Them the job is done by all these different people who seem to have little or no care for their saftey or others arojnd them. No welding blinds installed to preven others geoing blind. Looks like its bring your family to work day in most these videos. Inbitinv friends and kids to work is askinv for trouble. And i am yet to see these men use a mig welder. Welding over paint? Yeah why not, the rest of the bucket is likely to fail. My money says this bucket will last a fraction of the time a properrly consttucted oem one will. Those welds i doubt have the penetration required
Maybe the idea is the bucket does not last too long, then needs new on?
These buckets would break if they dug anything other than sand
Great work! As a general note, it would be great to see the finished products in actual use.
you mean when the welds crack and the bucket splits apart from no weld prep and no weld discipline?
I totally agree with that. The first scoop of dirt those welds are coming apart.@@bayareaartist999
What a shame live-leak shut down. There would have been plenty of those videos.
I wouldn't be surprised if these guys are somewhere in the slums, already assembling a spaceship to Mars.
Just like the africans building helicopters.😂
@@Skidderoperator Is there a video?
@@savir plenty.😆
See how long it will last
Soy metalúrgico. Uso máscara. Guantes los más duros una pinza de 600 amperios...etc ..ellos una pinza común. Casi no usan máscaras. Sin guantes .etc. y para mí son unos de los mejores soldadores que eh visto ..son unos genios realmente los felisito colegas..Ala los bendiga!!!!
En serio? Lo que hacen es horible.
Thats a Really Nice Bucket
As a welder these guys lack a lot of knowledge in welding anybody can weld metal to metal but penetration is key to welding.???????
No safety glass
No safety shoes
No safety gloves
It would be interesting to grab these guys and take them to say, Werk-Brau, to show them how they make buckets the proper way... All things considered, for what these dudes have on hand, this shit is pretty impressive.
I’m saying. You ain’t gonna see no fancy factory in these countries. You prolly never gonna see a hard hat or boots either. Fucking love these guys. Seeing them do this shit in sandals gives me life. Fuck OSHA
A guy could make a killing selling steel toed flip flops over there.😂
torch dude is a boss
The guy is playing friggin peek a boo with the welding torch.
Macha'Allah un travail de précision Qu'Allah louange à lui et pureté préserve pour notre oumma et communauté de tout mauvais oeil Amineeeeee
good job guys.👍🤗👍🇸🇯
You should replace "expert" with third world, cause those beads ain't expert material that's for sure.
سبحان الله وبحمده سبحان الله العظيم🌸
they are not experts, they are a lawsuit
Those anti-fog safety glasses looks pretty good, almost non-existing
Better than any excavator bucket I could build...:)...I remember manufacturing way before we had CNC and Robot...These methods are tried and true...Good health to you all.
the accuracy of the cutting skill
Definitely a JBC bucket being made
Ya gotta love those safety sandals everyone in that "shop" wears!
Các bác thợ khéo tay quá !.
This must slagless welding. They just weld right over a pass.😮
Im getting flashburn just from watching
OSHA would have a field day with guys!! 😅 But these guys are pretty amazing.
itd be their last day inspecting. they would retire the next day from the million dollar bonus for writing tickets
no gloves when welding...ouch....
Just imagine what those guys would do with proper tools and proper environment.
Quadratisch. Praktisch. Gut.
Im calling it right now, the second that bucket hits any rocks in mud it will explode from the stress
Experts in pajamas. Gravel between the toes.
Guys I'm watching you guys again. (as always) :-)
Question: Why don't you burn a V on the steel plates? Then the construct would become more stable. Greetings from Germany BaWü Neulussheim Ralf
On average, how many limbs or fingers are lost, per bucket?
6:37 ПЕрвый раз вижу что чувак в верхонке
nice welding hood
Two-day build. I was waiting to see the paint job. I expect that bucket will work just fine for a long time. 👍
I’ll give you 75 bucks for the metal
These guys will be very frustrated in my country with all the safety rules…😅😅😅