A significant amount of confidence this video has given me. I’m retired and those money making years are behind me. Great contribution. It’s a gift. Blessings!
So many people on the short you made on this said you couldn't do it! Keep doing what you do bro I wish I had half the talent you do for body work you do I can make a car go but I'll never be able to make a car look so good
I recognize a good job and yours is very very good. Your contributions are a brilliant solution and above all very practical in tools, thanks for sharing your experience with everyone. May I ask you to provide me with the specific measurements of your handmade glue tower? I think it is a very good solution and low price. you can help? Cheers
Hello Juan. Thanks for watching I'm working on a PDF that will have the measurements of the tower I will post in the description . It's a pretty simple and low cost design for sure .
@@Mpiya281 You may already know this but your tabs may have release agent on them. Before applying glue make sure you heat the tab using a heat gun or torch. You may have to do it several times before the tab starts to stick. If your using collision glue let it sit for a little longer before making the pull. I usually wait 3-5 minutes. I would also heat the panel to burn off contamination.
A significant amount of confidence this video has given me. I’m retired and those money making years are behind me. Great contribution. It’s a gift. Blessings!
So many people on the short you made on this said you couldn't do it! Keep doing what you do bro I wish I had half the talent you do for body work you do I can make a car go but I'll never be able to make a car look so good
I would love to learn this skill. You do Impeccable Work. Have you ever done PDR on semi trucks?
Yes mainly on roof and doors.. Check out elevationdentco.com
I'm an aircraft sheet metal mechanic with 20 years experience and this dude is badass❤🎉🎉
You are amazing. Such patience and dexterity.
A true talented professional
That pulling tower is the bomb.
Gap yo'q qoil ishlarizga omad 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Hi,
That was amazing how you step-by-step walked that Dent out you my friend you are an absolute craftsman.
Thank you
Thanks for the support Awad 🙌🏽
Wow, you are a beast, when it came to that repair. You aced it, great job, man.
Man you are good at what you do.
That was a monster dent.
I’ve just got those tabs, can’t wait to use it…well done, really nice to see your techniques🤙🏽🤙🏽
Thank you Jano.. Let me know how you like the tabs.. 🙌🏽
hello buddy from Russia!!! cool video !!! thanks a lot for your work!!!
This guy does amazing work 💪👍❤🎉
Dang nice work man
Awesome repair
Great work
Appreciate it 🤙
Excellent work great 👍 well done ⚒⚒⚒⚒⚒⚒⚒⚒⚒⚒⚒⚒thanks
Thank you Luis much appreciated 👊
Nice work 👍
Is it the same amount of time sanding it primer in it shooting it painting thn pdr
Very well done mate!
Thank you Ricardo..👊
I was looking forward to seeing this repair and you didn't disappoint. Great job and air high five...
Thank you Troy glad you approved 🔥🙌🏽
Great job
Appreciate it Daniel 🙌🏽
Awesome. Perfect enough!
Unreal, nice work.
Thank you Victor 👊
Very nice job! Keep it going.
Thank you Predjo 👊🔥
I recognize a good job and yours is very very good. Your contributions are a brilliant solution and above all very practical in tools, thanks for sharing your experience with everyone. May I ask you to provide me with the specific measurements of your handmade glue tower? I think it is a very good solution and low price. you can help? Cheers
Hello Juan. Thanks for watching I'm working on a PDF that will have the measurements of the tower I will post in the description . It's a pretty simple and low cost design for sure .
Хорошая лебёдка.
Çok Çok iyi ve öğretici bir video ❤❤
Um dia quero chegar no seu nível
Brilliant job master you did it again flawless skills hope one the a can be like you I going to keep training 👍
Thank you Alfredo. don’t stop training 🔥🔥
Nice work right there!
Appreciate it Nick 👊
@@elevationdentco 👊🏻
Does it impact paint overtime? @Elevation Dent Co.
Magician!
wow wow love it love it
Where did you get that PDR puller post? I gotta get one of those
I made the glue puller for about a hundred bucks
Is that normal silicone that he uses ?
Great job!
Thank you Mateo 👊
Muito bom trabalho 👍🔨🔨🔨💪🏻💪🏻💪🏻
🔥🔥🔥🔥
Hi what is the long sharp tool is called
that was a pdr finesse rod. They make good sharp tools
@@elevationdentco thank you
Nice work. Where r u located!
Thank you Shen.. Dallas Tx
Where I could get same ram so I could put it under the tire
Impressive!
Awesome job. What glue are you using?
I seen this video like 20 times brilliant job what’s the name of the glue it doesn’t look like tab weld?
Это круто! Просто нереальный результат!
Again, nice work. Did you make the glue pulling ram?
How do you know the math on this I guess once you understand the feel for the metal
RESPECT!
Two s hooks at the same time y’all Learned sumpum tday
Super!
Thank you very much!
how much did u charge for this one, how many hrs?
That’s crazy how there isn’t any paint chips coming of the reck Wht do you thn chipped paint dents
Great work mate are you going to be running training schools soon?
Thank you Shave.. Yes very soon be on the lookout 😎
What type of glue are you using, I’m having issues with my Keko Collision glue not sticking.
I'm using Cam auto collision glue for this repair.. Is your glue not sticking to the tab or the panel?
@@elevationdentco I’m assuming it’s not sticking to tab when I pull the glue stays stuck to the panel.
@@Mpiya281 You may already know this but your tabs may have release agent on them. Before applying glue make sure you heat the tab using a heat gun or torch. You may have to do it several times before the tab starts to stick. If your using collision glue let it sit for a little longer before making the pull. I usually wait 3-5 minutes. I would also heat the panel to burn off contamination.
Sitting on the wooden box I got you😂😂
Where is your shop located at?
Dallas
Bravou
Damn!!! How long did this take you?
Awesome
I don’t understand y you hammer the dent back in
Monstr!!!
Thank you Sir.
Wow!
Appreciate it Raymond 🔥
👍👍👍
Thank you Sir
Great job but you could tell not easy by no means .....LOL
Pretty sure you could have just took of the panel and kicked 90% of that dent out it’s all open from the inside
lol ok 🤦🏽♂️
Awesome repair!!
Thank you Salah 🔥