I have a problem after attempting to repair my Zhiyun Crane M3. Now, the bottom motor of the gimbal's 'pan axis motor' is rotating continuously, and I can't seem to resolve this issue.@@icammech
@@icammech I desoldered the PCB from the controller and disconnected the flexes. After resoldering the 3 motor wires and reconnecting the flexes, this motor starts spinning when the gimbal is powered on, while the other two motors work correctly. I didn't remove the motor; the resistances on the coils are correct when comparing them to the rest of the motors. However, I did unscrew the slipring cable screw.
Se puede comprar para Ecuador
Joystick chahiye bhaiya kitne me mil jayegi ye
Have you worked on Drifted problem ?
Yes I did
Bhaiya aap kaha se hain? Mere crane 2 me bhi issue hai... joystick kitne ki aati hai??
Bangalore
Hey,
Where can I buy that kind of joystick to replace.
Aliexpress.com
@@icammechSir if you don't mind can you send me link for Joystick
@@dhanachakma9163 not available right now
Try at Aliexpress.com
@@icammechthan where did I buy.
did you repair zhiyun crane m3 ?
Yes
I have a problem after attempting to repair my Zhiyun Crane M3. Now, the bottom motor of the gimbal's 'pan axis motor' is rotating continuously, and I can't seem to resolve this issue.@@icammech
@@januszkowalski5212 did u open motor there is an adjustment
@@icammech I desoldered the PCB from the controller and disconnected the flexes. After resoldering the 3 motor wires and reconnecting the flexes, this motor starts spinning when the gimbal is powered on, while the other two motors work correctly.
I didn't remove the motor; the resistances on the coils are correct when comparing them to the rest of the motors.
However, I did unscrew the slipring cable screw.
@@januszkowalski5212 can u call me on Sunday ( Instagram call) I’ll try to help