How to install Nissan Navara D40 Injector properly
ฝัง
- เผยแพร่เมื่อ 12 ม.ค. 2021
- This video has done mainly to remind and avoid common mistakes done by most of the machines while reinstalling YD25 injectors, and purchasing a reconditioned replacement injectors for Euro4 engines.
Get a proper advice by a professional before you
01. purchase an injector for your Navara D40.
02. Reinstall with a new/recon/service Injector
Below are some hints
VEHICLE INFORMATION
Nissan D40 Navara 2.5L & Nissan R51 Pathfinder 2.5L
Euro Specification of Vehicle: Euro 4
PART NUMBER INFORMATION
Part Number: 095000-6250
OEM (NISSAN) Part Number:
16600-EB70B / 16600-EB70C / 16600-EB70D / 16600EB70B / 16600EB70C / 16600EB70D / 16600-EC00A / 16600-EC00B / 1600-EC00C / 16600-EC00D / 16600-EC00E / 16600EC00A / 16600EC00B / 16600EC00D / 16600EC00E / 16600-EB70* / 16600-EC00*
connect with us on :
Facebook : / abcautotrendy
instagram : / abcautotrendy.4x4
web: www.abcautotrendy.com
email: abcautotrendy@gmail.com
whatsApp/viber : +94 777 32 9922 - ยานยนต์และพาหนะ
Hello, if i do a reconditionning for my old injector in the specialist diesel repair shop ,for the calibration will the code be the same as written on the top of the injector or it will change?
Well, code will the same as written on the electric head unless you change the injector head..
What O ring goes in the first groove, or does it stay empty?
There is no Oring for the first grove, it’s empty
If i am going to change x1 injector am I going to register it on the ECU?
Yes dear you have to register the new or replaced code in the ECU
Hello Sir,this is my Vin # MNTVCUD40Z0012476,what is the exact genuine nissan replacement Injector,I need to change one?
Hi deer following are the YD25DDTI EURO4 engine injectors part numbers
VEHICLE INFORMATION
Nissan D40 Navara 2.5L & Nissan R51 Pathfinder 2.5L
Euro Specification of Vehicle: Euro 4
PART NUMBER INFORMATION
Part Number: 095000-6250
OEM (NISSAN) Part Number:
16600-EB70B / 16600-EB70C / 16600-EB70D / 16600EB70B / 16600EB70C / 16600EB70D / 16600-EC00A / 16600-EC00B / 1600-EC00C / 16600-EC00D / 16600-EC00E / 16600EC00A / 16600EC00B / 16600EC00D / 16600EC00E / 16600-EB70* / 16600-EC00*
I've got a 08 D40 just put a new turbo in and wanting to just do a full service overhaul and replace all injectors and glows soon. I haven't looked at prices yet but is it worth doing myself or just take it up and pay to have all new ones put in?
Good day Mat.
May I ask a reason of
1. Injector replace ?
2. Glow plug replacement ?
1.1 better find a place that perform injector pressure test and cleanup and re use them if injectors are perform well such as
* no back leak
* better in flow rate
* better in ideal flow rate
2.2 you can test glow plugs and replace only if Bads (if your having a running engine that means your glow plugs are good)
1.1, irrespective of injector replace or test and reinstall you need to keep following in hand
1. U washers X4 (back leak washer)
2. Copper shims X4
3. Injector body O-ring X4
Let me know if you need any help so I can guide you to do it by yourself
Cheers
@@abcautotrendy only reason I thought to replace them is idk the service history of the car and it has 340k, it runs great lil bit of a rattely thing but I plan on doing a few things before I end up eventually selling it but for now I plan on driving it for a while as it's great on fuel and is over all nice to drive I just noticed the other day it has puffed a bit of white smoke on start up (could be a range of things) there is no power loss and any white smoke is gone the moment I start to drive. other thing I'm replacing soon is front wheel bearings, it's also been straight piped and dpf delete. Thanks for taking the time to reply mate
Hello
I just received a pathfinder same as my model for parts.
After inspection notice oil been pushed out the motor side breather hose connected to catch can.
What could cause this?
Extreme blow by pressure?
Hi there. What I can understand is that your engine is under a compressor that's the reason mechanics get a lot of oils pushed to the catch can...
You can do a test by taking off that hose out of the catch can and inserting it into a clean empty water bottle and leaving the engine running for about 30 minutes and seeing how much oil is filled in the bottle.
@@abcautotrendy
Thankyou for quick response will do .
Good day, my d40 has an oil leak on the top of the no. 4 injector below the electirical socket i think its the rubber seal. Does nissan will replace only the one leaking or all the four because they will remove the top cover anyway.
Well, you can replace only the leaking seal, I have done a video of how to replace and it can be done by yourself instead of taking to Nissan and paying higher cost
@@abcautotrendy Thank you it was the gasket nozzle holder as i saw on your video. I will search for that video of yours.
Do you know any website where we can buy guenine parts for denso injectors?
Yes there are plenty and where are you commenting from so based on that I can suggest a site that reliable for you
@@abcautotrendy from all Europe
And do you remember what was the part référence for nozzle .i have the same injectors as on your vidéo. Denso 16600ec00a
Well, then you can try with www.partsouq.com
VEHICLE INFORMATION
Nissan D40 Navara 2.5L & Nissan R51 Pathfinder 2.5L
Euro Specification of Vehicle: Euro 4
PART NUMBER INFORMATION
Part Number: 095000-6250
OEM (NISSAN) Part Number:
16600-EB70B / 16600-EB70C / 16600-EB70D / 16600EB70B / 16600EB70C / 16600EB70D / 16600-EC00A / 16600-EC00B / 1600-EC00C / 16600-EC00D / 16600-EC00E / 16600EC00A / 16600EC00B / 16600EC00D / 16600EC00E / 16600-EB70* / 16600-EC00*
Is injectors can be repaired ?
Yes, with the genuine DENSO parts
@@abcautotrendy How much it will cost ?
It depends of the fault, if the electrical head broken or chip damaged, otherwise nozzle clogged with carbon deposits. So the overall it may cost 15-20k