YD25 Timing Chain Install D40,D22,R51

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 174

  • @kenm8797
    @kenm8797 ปีที่แล้ว +10

    Motor engineering understanding at another level.You're a great teacher and thank you millions times.If you can please explain all other engine fixes the same way.👌👌👌

  • @positivemasculinity42
    @positivemasculinity42 6 หลายเดือนก่อน +1

    I have rebuilt motorcycle motor and gerboxs. After watching 2 minutes of this video, I decided to get a real mechanic to change the timming chain. Thank you for this video.

  • @lorrainebwoy
    @lorrainebwoy ปีที่แล้ว +6

    This is the most informative video on this topic. Thank you 🙏

  • @kabuyeakram6302
    @kabuyeakram6302 2 ปีที่แล้ว +5

    Thank you man
    You guy I think u a teacher the way you explain is professional

  • @llstation4085
    @llstation4085 3 ปีที่แล้ว +11

    Great video, very well explained,top job ,it will help hundreds of people, well done

  • @chrisdownes2974
    @chrisdownes2974 2 ปีที่แล้ว +7

    Does your kit provide different size shims for fuel pump sprocket?

  • @kaloyanpetrov3428
    @kaloyanpetrov3428 9 หลายเดือนก่อน +1

    Could you please list when changing chains which sprockets (gear wheel) should I replace? Thank you!

    • @yd2532
      @yd2532  9 หลายเดือนก่อน

      Crank, vacuum pump, fuel pump sprockets need to be changed as they wear the most. Cam sprockets are already double row and do half the revolutions of the crank so they don't wear as much as the rest

  • @JonathanMathew-n5d
    @JonathanMathew-n5d 28 วันที่ผ่านมา

    Thanks you so much for the video. I am a diy person and this video has really helped me to work on my D40. If possible, can make and upload a video of assembly a short motor.

  • @paulfinch1182
    @paulfinch1182 4 หลายเดือนก่อน

    Really helpful video saved me a lot of hassle 10/10

  • @aznpride009
    @aznpride009 ปีที่แล้ว +1

    Great tutorial mate. I followed your exact steps but afterwards when I rotate the crank by hand the timing marks on the chain never line up again with the dots on the gears. The dots on the gears always line up correctly though. Would this be okay?

    • @yd2532
      @yd2532  ปีที่แล้ว +1

      Yes that's normal

  • @tonykramer3534
    @tonykramer3534 9 หลายเดือนก่อน +1

    Howdy brother, you are the Best....how easy u make it look and how u explain it so dam well...i bought a good quality Nasser kit but still not confident to do myself...i wish u were here in Adelaide cos i would pay you to do mine....Thankyou

  • @Ozziegarage
    @Ozziegarage 9 หลายเดือนก่อน +2

    It might have been asked already but I’ve looked through the comments and I haven’t see anyone ask but at 1:55 in the video where you put lock tight on is that the only place I should be putting some? Cause I feel stressed thinking that all the other bolts and nuts should be fine without lock tight.. great video tho I’ll be using it as a guide very soon

    • @yd2532
      @yd2532  9 หลายเดือนก่อน +1

      Yea vacuum pump is the only thing that needs loctite

    • @Ozziegarage
      @Ozziegarage 9 หลายเดือนก่อน

      @@yd2532 cheers thanks

  • @kaloyanpetrov3428
    @kaloyanpetrov3428 9 หลายเดือนก่อน

    Hello, why do you remove the lower chain single and then put on a double one with double sprockets, isn't it originally a single chainring with single sprockets?

    • @yd2532
      @yd2532  9 หลายเดือนก่อน

      Single row chain is prone to snapping so we upgrade to double row

  • @yosefelhurti3366
    @yosefelhurti3366 9 หลายเดือนก่อน +1

    His experience ❤❤

  • @sham903
    @sham903 3 ปีที่แล้ว +4

    more videos on YD25, please. Thank you so much

  • @МаксимИванов-в5с8н
    @МаксимИванов-в5с8н 3 หลายเดือนก่อน

    hello. tell me, why did you install this ring in the upper tensioner at 8:55?
    is this a spacer to increase the length of the pusher? is it included with the new chains and tensioners? What is its size?

    • @yd2532
      @yd2532  3 หลายเดือนก่อน

      @@МаксимИванов-в5с8н 7mm and it's a fail safe that takes up the air gap so that it can't go all the way back if it fails

  • @ishmaelmunzira3238
    @ishmaelmunzira3238 ปีที่แล้ว +2

    Excellent explanation

  • @kaloyanpetrov3428
    @kaloyanpetrov3428 8 หลายเดือนก่อน

    Hello, does the vacuum pump gear change when changing the chain? If the single row circuit is kept as it is originally.

  • @TomGrande-kc6zd
    @TomGrande-kc6zd 4 หลายเดือนก่อน

    When u removing the tension cylinder you are putting in a failsafe. Where can I buy that one? Or did u make it? What’s the measurement if i need to make it my own? 😇

    • @yd2532
      @yd2532  4 หลายเดือนก่อน +1

      7mm long. Can cut your old tensioner plunger

  • @the510wagon
    @the510wagon 2 ปีที่แล้ว +3

    Great vid. Have watched a couple of times. Many thanks.
    I have a couple of questions:
    - What are your thoughts on doing this job with engine in vehicle? How much harder is it?
    - Another YT channel with a lot of YD25 experience reckons you should never turn the engine with a socket & bar on the crank. It can cause the chains to skip a tooth??
    If this is true, what's the best way to rotate the engine when doing a routine inspection of the chains?

    • @yd2532
      @yd2532  2 ปีที่แล้ว +4

      Can only jump a tooth when the chains are super worn out or sprockets missing teeth. If the parts are all brand new and the fail safe is in the tensioner it's won't be able to jump. We replace the chains in the car 9 hour job for a d40 and 15 for a d22

    • @torbjrnhansen2967
      @torbjrnhansen2967 2 ปีที่แล้ว

      you have to go down with the bottom pan in d22 way to change the lower chain

    • @bushratbeachbum
      @bushratbeachbum 10 หลายเดือนก่อน

      ​@@yd2532what about a pathfinder R51?

    • @yd2532
      @yd2532  10 หลายเดือนก่อน

      @@bushratbeachbum r51 is the same time as a D40 around 9 hours

    • @bushratbeachbum
      @bushratbeachbum 10 หลายเดือนก่อน

      @@yd2532 legend. Cheers mate.
      Ill set aside two days so I don't have to rush.
      Much appreciated.
      Ill look at ordering asap

  • @VarshaKumar-b4t
    @VarshaKumar-b4t 2 หลายเดือนก่อน

    This video was very helpful thank you

  • @sirjolly81
    @sirjolly81 ปีที่แล้ว

    I've just replaced front cover gasket on my 140kw 2.5. the plastic timing guide fell out as I removed the cover. It has one raised edge. Is that meant to be towards the engine or the timing cover. Yellow plastic piece.

    • @yd2532
      @yd2532  ปีที่แล้ว

      www.tiktok.com/@yd25.com.au/video/7187004034899791105?_r=1&u_code=d8l049fa7dh37f&preview_pb=0&sharer_language=en&_d=d8l044aajmgd10&share_item_id=7187004034899791105&source=h5_m×tamp=1700302195&user_id=6747806667557585926&sec_user_id=MS4wLjABAAAAXXad7RKkwD5fjZuucsAkTDblrfBl_MEX8TTuSJRE_f1nXZzFMcHHd5rxSjIR8QXL&social_share_type=0&share_iid=7302168086265661185&share_link_id=c7ac05ff-ed27-4b10-b347-e67fd30a3bda&share_app_id=1233&ugbiz_name=MAIN&ug_btm=b8727%2Cb2878

  • @benrogers5393
    @benrogers5393 4 หลายเดือนก่อน

    Hey mate, I’ve got a YD25 with 112k on the clock and wondering if this is something I need to be looking at a certain amount of Kms on the odo? Or is it just something for when you’re looking to put more power in, ie bigger turbo, more boost?

    • @yd2532
      @yd2532  4 หลายเดือนก่อน

      @@benrogers5393 ye average life for the fuel pump chain is around 150k

  • @docduck2427
    @docduck2427 2 ปีที่แล้ว +1

    Geez man you make this look so easy. I currently have the good old chain slap from a broken tensioner. Whats a good brand kit to get to replace with?

    • @yd2532
      @yd2532  2 ปีที่แล้ว +1

      If the chains are good you could just replace the tensionor, make sure it's genuine. Otherwise here is the Link to the timing chain kit fitted www.yd25.com.au/index.php/services/yd25-duplex-timing-chain-conversion-kit

  • @troymckibbin528
    @troymckibbin528 ปีที่แล้ว

    Once you have everything installed is it OK to see if the engine will start and run it briefly before putting the radiator back on?

    • @yd2532
      @yd2532  ปีที่แล้ว

      Yes that's fine

  • @lesilestivany7839
    @lesilestivany7839 2 ปีที่แล้ว

    G,day can the YD 25 engine be made more 🤔 heavy duty???

  • @dzikidzik1752
    @dzikidzik1752 2 ปีที่แล้ว

    In a moment I will be replacing the timing chain, please tell me which manufacturers do you recommend? what brands?

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      Yd25.com.au has the best double row and single row kits

    • @dzikidzik1752
      @dzikidzik1752 2 ปีที่แล้ว

      @@yd2532 Unfortunately for my country this site is blocked I don't understand why, I'm from Poland, how else can I buy a chain from this company? because I understand that Yd25 is a direct chain manufacturer? please forgive me but I haven't owned this car for a long time and I want the best for it hence my inquisitiveness.

    • @dzikidzik1752
      @dzikidzik1752 2 ปีที่แล้ว

      @@yd2532 Maybe you know equally good producers who will be available in Poland?

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      @@dzikidzik1752 they can send parts internationally just fill out the contact page. Otherwise if you get a kit locally just get a genuine one

    • @dzikidzik1752
      @dzikidzik1752 2 ปีที่แล้ว

      @@yd2532 Thanks a lot for your help master 💪🍺

  • @MudGuardian
    @MudGuardian 2 ปีที่แล้ว +2

    Perfection 👌

  • @Batman-gi3ty
    @Batman-gi3ty ปีที่แล้ว

    Здравствуйте. Подскпжите в шатунах в длине YD25 174 л. С и 190 л. С есть отличия?

  • @AleksandEr71
    @AleksandEr71 ปีที่แล้ว

    Доброй ночи!! Вы поставили натяжитель без железной прокладки. Подскажите пожалуйста еë обязательно ставить под натяжитель..???

  • @henrywilliams4317
    @henrywilliams4317 10 หลายเดือนก่อน

    Great tutorial gives me confidence to attempt this task myself.
    Do you have a tutorial on actually removing the engine from the vehicle ?
    Regards
    Henry

    • @yd2532
      @yd2532  10 หลายเดือนก่อน +1

      I dont but we usually take of the lower sump off before you pull the engine so you can leave the front diff in

    • @henrywilliams4317
      @henrywilliams4317 10 หลายเดือนก่อน

      @yd2532 thank you, I am going to give a try.

  • @robhowett7733
    @robhowett7733 3 ปีที่แล้ว

    Hi, I'm replacing my top chain on my yd22 170,000 mile xtrail, I noticed you didn't change the cam gears, is there any reason for that and would you recommend I do or should I replace them all or will they be ok. Tnx in advance.

    • @yd2532
      @yd2532  3 ปีที่แล้ว +2

      Cam sprockets are double row from factory and do half the revolutions of the crank so they last the longest out of all the sprockets.
      If you do replace them make sure you hold the cam by the first lobe with a big shifting spanner with good flats on it. Don't hold it by the hex in the centre of the can cause you will either round it off or it will start to twist the cam from the torque 144nm

    • @dsk-xx
      @dsk-xx 10 หลายเดือนก่อน

      i have a 2.2 diesel engine. Its done 1,20,000 miles . Regular maintained. Early interval 5w30 oil changes.
      How much should I expect timing chain to last more?
      What would be significant symptoms of timing needing a change?
      Although on the other end of cams , vacuum pump chain sprocket had slacked at 1,00,000 miles . I did a work around and gave the needed tension to the tensioner guide. I noticed the teeth on pump sprocket one thin , but its working just ok since then.
      Please guide me about timing, how long do they last on good maintained.

  • @romankravchuk2720
    @romankravchuk2720 2 ปีที่แล้ว

    Hi there.
    Where I am able to find fail safer for upper tensioner?
    Does it go with genuine Nissan Timing chain kit?

    • @romankravchuk2720
      @romankravchuk2720 2 ปีที่แล้ว

      My car is Navara D22 , 2010

    • @yd2532
      @yd2532  2 ปีที่แล้ว +1

      @@romankravchuk2720 it's something we have made. You could cut a bit off you old tensinor plunger to use as a fail safe

    • @romankravchuk2720
      @romankravchuk2720 2 ปีที่แล้ว

      @@yd2532 What is the price for the timing chain kit (not duplex) Navara D22?
      I have bought oil pump from you before.

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      @@romankravchuk2720 genuine single row with a billet vacuum pump sprocket is $950

  • @nOWaYOUT221
    @nOWaYOUT221 6 หลายเดือนก่อน

    Is na new navara d23 yd25 have double row timing chain

    • @yd2532
      @yd2532  6 หลายเดือนก่อน

      The still use single row

  • @andydiep3632
    @andydiep3632 2 ปีที่แล้ว

    Hi mate,
    Does this kit go on the early model (euro 3)?
    Is the fuel pump shins included?
    And what rtv you recommend using?
    Thanks.

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      Yes will fit euro 3 2005-6. We started making shims locally because they were hard to get from Nissan $25 for the 2 shims

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      3 bond supersealer grey silicon is what we use

    • @andydiep3632
      @andydiep3632 2 ปีที่แล้ว

      @@yd2532Does it include timing chain cover gasket and aprox how much to do the entire job? Thanks

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      @@andydiep3632 doesn't come with the cam chain cover gasket usually they are fine to reuses just silicon them in the corners. We charge $2500 for a standard D40 parts and labour

    • @andydiep3632
      @andydiep3632 2 ปีที่แล้ว

      @@yd2532 I am looking to do the Job my self so how much is just the kit it self?
      And anything to look out for when doing so?

  • @DIFFLOCKERS
    @DIFFLOCKERS ปีที่แล้ว

    None of my chain lines match up and there's only 1 yellow indicator per chain. Can I just line it up with fuel pump and check cylinder #1 is at TDC then mark the cams?

    • @yd2532
      @yd2532  ปีที่แล้ว +1

      When you pull the car apart the colour links won't line up. Mine does because I put the chains on for the video. So just put crank to 12 o'clock and pin in fuel pump and your good to pull apart

  • @conmanumber1
    @conmanumber1 ปีที่แล้ว

    Is this the 2012 Spanish built Nissan Navara D40 St-X Diesel?.

    • @yd2532
      @yd2532  ปีที่แล้ว

      this is a 2008 euro 4 engine. Still similar process depending on the kit you buy

    • @conmanumber1
      @conmanumber1 ปีที่แล้ว

      ​@@yd2532Thanks. What's a good reliable duplex chain kit worth buying?.
      At what stage would one knows when to change?.
      Mine is 165.000 K.m on clock but it's not idling then when attempting to accelerate it farts n missis then dies.
      It smokes a really white Hazy putrid smoke but no oil in coolant nor coolant in sump.
      It struggle to start.
      S.c.v, e.g.r cooler replaced (but not needed, injectors tested fine. E.g.r valve actuator works fine.
      Any idea what may cause this grief?... Crank n cam sensors?.
      Thanks again in advance..Carl

    • @yd2532
      @yd2532  ปีที่แล้ว

      @@conmanumber1 could be your scv make sure you get a genuine one. here is achain kit to suit. yd25.com.au/index.php/services/140kw-duplex-timing-chain-conversion-kit

    • @conmanumber1
      @conmanumber1 ปีที่แล้ว

      ​@@yd2532Is this simular to the West Yorkshire Engines independent Nissan Navara service guys duplex kit he invented?. I was about to order from him but noticed yours.

    • @yd2532
      @yd2532  ปีที่แล้ว

      @@conmanumber1 it's our own kit uses genuine Nissan double row chains.

  • @bluenaite
    @bluenaite 2 ปีที่แล้ว

    Hey guys, do you guys do the conversion kits for the yd25 VSK (2010)? I sent an enquiry through your website but not sure if it went through.

    • @yd2532
      @yd2532  2 ปีที่แล้ว +1

      Ye here is the link www.yd25.com.au/index.php/services/140kw-duplex-timing-chain-conversion-kit

    • @bluenaite
      @bluenaite 2 ปีที่แล้ว

      @@yd2532 Cheers. I have to do the timing chains so I figure I should do the conversion while I'm in there. To confirm, you need to know which Vac pump mine has and do I just email through the website to order?

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      @@bluenaite Ye find out which vac pump is on it and email or call to order

  • @BorneoLifeTV
    @BorneoLifeTV 3 ปีที่แล้ว

    Hi from borneo.. thanks for your sharing.. nice job guys 👍👍👍

  • @magpiesfc10
    @magpiesfc10 ปีที่แล้ว

    How many o’rings are there for the timing cover to block is it just the brown one

    • @yd2532
      @yd2532  ปีที่แล้ว +1

      4 red ones 2 small 2 big. From block to rear timing cover

    • @yd2532
      @yd2532  ปีที่แล้ว +1

      Watch this vid th-cam.com/video/VBbgKAgLwFE/w-d-xo.html

    • @magpiesfc10
      @magpiesfc10 ปีที่แล้ว

      Thanks YD25. Where do I get the fuel pump shims as they don’t come with the kit

    • @yd2532
      @yd2532  ปีที่แล้ว

      @@magpiesfc10 we sell them or nissan

    • @magpiesfc10
      @magpiesfc10 ปีที่แล้ว

      Do you have the part numbers for the different sized shims please

  • @sirus3505
    @sirus3505 2 ปีที่แล้ว

    Can i turn this engine over by hand just to check if piston to valve clearance are good?

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      If you don't have the fail safe in the tensinor or the chains are really worn it may jump teeth.

  • @erikeklund1461
    @erikeklund1461 21 วันที่ผ่านมา

    Can i se if my chains are in need of change via odb2 scan tool?

    • @yd2532
      @yd2532  21 วันที่ผ่านมา

      @@erikeklund1461 no need to measure it manually or with an oscilloscope

    • @erikeklund1461
      @erikeklund1461 21 วันที่ผ่านมา

      Thank you so much for your reply. By the way i cant get to your webpage from Sweden (403 access forbidden)

    • @yd2532
      @yd2532  21 วันที่ผ่านมา

      @@erikeklund1461 ye might need a VPN since we got too many spam emails so they blocked alot

    • @erikeklund1461
      @erikeklund1461 20 วันที่ผ่านมา

      Ok. As i remember your page contained a very good guyde to checking the chain. Both manually and oscilloscope. But i cant get to it. 🥺

    • @yd2532
      @yd2532  20 วันที่ผ่านมา +1

      @@erikeklund1461 to check it manually just pull off the cam chain cover and use a feeler gauge to measure the gaps between the links

  • @mattsfat73
    @mattsfat73 ปีที่แล้ว

    Hi mate, why did the fuel pump shim size change at all ?

    • @yd2532
      @yd2532  ปีที่แล้ว +1

      From factory Nissan has the wrong shim on them most of the time because they cant easily check alignment because the vac pump sprocket has 2 floating rings around the teeth. That's why the chain life varies so much because of the factory alignment

    • @mattsfat73
      @mattsfat73 ปีที่แล้ว

      Thanks for the fast reply :) where do you get the shims from ?

    • @yd2532
      @yd2532  ปีที่แล้ว

      @@mattsfat73 we had some made or nissan

  • @magpiesfc10
    @magpiesfc10 ปีที่แล้ว

    Where can you buy the locking pins from please

    • @yd2532
      @yd2532  ปีที่แล้ว

      we make it for the balance shaft pin. The fuel pump pin is just a screwdriver bit

  • @jessetink3753
    @jessetink3753 2 ปีที่แล้ว +1

    Hey champ is there a way to tell if it’s your timing chain or injector rattle?

  • @velinr
    @velinr 3 ปีที่แล้ว +1

    What is this "fail safe" for the top tensioner?

    • @yd2532
      @yd2532  3 ปีที่แล้ว +1

      Genuine tensinors are the best but the top ones are prone to failing (rattling on startup till the oil pressure light goes out) The fail safe takes up the air gap in the tensinor so if it does fail it doesnt have enough slack to jump teeth.

    • @TheMrthiagox
      @TheMrthiagox 2 ปีที่แล้ว

      @@yd2532 measures of fail safe can you tell us?

    • @yd2532
      @yd2532  2 ปีที่แล้ว +2

      @@TheMrthiagox around 7mm it's designed so the spring fit inside it so it doesn't add any tension it just takes up the air gap

    • @TheMrthiagox
      @TheMrthiagox 2 ปีที่แล้ว

      @@yd2532 but this fail safe will not make noise?

    • @yd2532
      @yd2532  2 ปีที่แล้ว +1

      @@TheMrthiagox doesn't add any noise by using the fail safe

  • @omaliveatlast4688
    @omaliveatlast4688 2 ปีที่แล้ว

    Do camchain adjusters work by oil pressure ?

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      Ye they are hydraulic tensinors usually when the top tensinor starts to go bad it will rattle untill the oil pressure light goes out

  • @negueba235689
    @negueba235689 ปีที่แล้ว

    Do all the pump shins follow in a kit ??

    • @yd2532
      @yd2532  ปีที่แล้ว +1

      The shim kit is an optional extra

    • @negueba235689
      @negueba235689 ปีที่แล้ว

      @@yd2532 Where do you recomand to order from ? :)

    • @yd2532
      @yd2532  ปีที่แล้ว

      @@negueba235689 if you in Australia you can order from our online shop otherwise fill out the contact us section on the website yd25.com.au

  • @TheDivineImpulse
    @TheDivineImpulse 4 หลายเดือนก่อน

    No cam shaft sprockets? 😮

  • @mariosilviosilvio
    @mariosilviosilvio 7 หลายเดือนก่อน

    Your video is very good, keep it up good morning from Manaus Am Brasil

  • @shalnks
    @shalnks 3 ปีที่แล้ว

    Very good and informed video. Well done

  • @rangerj4080
    @rangerj4080 2 ปีที่แล้ว

    Is there a solution for the 140kw yd yet?

    • @yd2532
      @yd2532  2 ปีที่แล้ว

      Ye here is the kit for 140kw models www.yd25.com.au/index.php/services/140kw-duplex-timing-chain-conversion-kit

  • @rawel30
    @rawel30 2 ปีที่แล้ว

    What is the correct compression pressure of the Nissan Navara 2.5?

    • @yd2532
      @yd2532  2 ปีที่แล้ว +1

      Around 400psi

  • @patsparks738
    @patsparks738 4 หลายเดือนก่อน

    Great video mate

  • @glenwoolnough1499
    @glenwoolnough1499 ปีที่แล้ว

    Where do i get those special tools?

    • @yd2532
      @yd2532  ปีที่แล้ว +1

      We make them you can hire them when you use our kit

  • @JeyssJeyss
    @JeyssJeyss 2 หลายเดือนก่อน

    Hello..
    Its been a year sinve my xtrail is resting..mechanics unable to set timing..each time it slips 3 ..

  • @lepequie
    @lepequie 9 หลายเดือนก่อน

    I can not see link to purchase parts does not work

    • @yd2532
      @yd2532  9 หลายเดือนก่อน

      Link might only work for Australia. Where are you located?

  • @timlaw219
    @timlaw219 3 ปีที่แล้ว

    Excellent video man

  • @dsk-xx
    @dsk-xx 11 หลายเดือนก่อน +1

    Isn't that a yd 2.2 diesel

  • @theLemonsForLife
    @theLemonsForLife 3 ปีที่แล้ว

    Thanks for the helpful video!

  • @magpiesfc10
    @magpiesfc10 ปีที่แล้ว

    Timing covers torque specs please

  • @aaronford7838
    @aaronford7838 2 ปีที่แล้ว +1

    Wish I had of had this video when did mine years ago

  • @ToromRodney
    @ToromRodney 9 หลายเดือนก่อน

    Why is my Nissan Urvan 350 turbo diesel engine bus having a shooting oil out of my dipstick

    • @yd2532
      @yd2532  9 หลายเดือนก่อน

      check for blowby from the breather hose on the tappet cover

  • @GenaEnSamIAm
    @GenaEnSamIAm 3 ปีที่แล้ว

    Awesome videos!! Thank you!

  • @wayneclements7202
    @wayneclements7202 3 ปีที่แล้ว +1

    fantastic detailed video, thankyou.

  • @SylvainKloutse
    @SylvainKloutse 10 หลายเดือนก่อน

    Comment remplacer le pompe de naissan x -trail moteur 2005

  • @Davo_1991
    @Davo_1991 3 ปีที่แล้ว

    Torque to 60nm with rattle gun lmfao yeah right bud...
    Also its best practise to have dot on counterweight/balance shaft gear that lines up that tooth in between the two dots on the crank gear. Not 100% necessary but best to do and cyl 1 should then be on compression tdc. And the cam gear dots should align with the dots on the timing case.

    • @yd2532
      @yd2532  3 ปีที่แล้ว +1

      Before removing the old bottom chain and sprockets you can replace the vac pump sprocket with the new one then lock the fuel pump and torque it but the worn chain jumps sprocket teeth.

  • @แมวดําออนทัวร์
    @แมวดําออนทัวร์ ปีที่แล้ว

    สุดยอดครับ

  • @threemglobal
    @threemglobal 2 ปีที่แล้ว

    Good job

  • @nasledie8078
    @nasledie8078 8 วันที่ผ่านมา

    Incorrect installation location of the fuel injection pump pin

  • @coadyg
    @coadyg 3 ปีที่แล้ว

    Great video

  • @ПавелШишкин-ф4л
    @ПавелШишкин-ф4л 5 หลายเดือนก่อน

    Спасибо огромное

  • @probuildconstruction
    @probuildconstruction 2 ปีที่แล้ว

    Legend

  • @arturolaos9456
    @arturolaos9456 10 วันที่ผ่านมา

    Ty

  • @enverdunya
    @enverdunya 2 ปีที่แล้ว

    selamlar çok güzel anlatmışsın harika

  • @o_desconhecido1
    @o_desconhecido1 ปีที่แล้ว

    Top top demais

  • @madjidmadjid3539
    @madjidmadjid3539 2 ปีที่แล้ว

    thanks you

  • @romankravchuk2720
    @romankravchuk2720 2 ปีที่แล้ว

    nice video

  • @MrNotStock
    @MrNotStock ปีที่แล้ว

    Sick

  • @juanlabrador8427
    @juanlabrador8427 8 หลายเดือนก่อน

    Lo quiero en esañil

  • @ThomasPhiri-n2u
    @ThomasPhiri-n2u 6 หลายเดือนก่อน

    Remove. A pump yd25de

  • @AshrafJutt-z5j
    @AshrafJutt-z5j ปีที่แล้ว

    Nissan diesel

  • @tafnaka
    @tafnaka 3 ปีที่แล้ว +4

    Great tutorial . Keep up the good work .

  • @jasonPMR2
    @jasonPMR2 4 หลายเดือนก่อน

    Does the fuel pump bolt try to rotate when you do the bolt up to 90nm? If so how do you stop it turning?

    • @yd2532
      @yd2532  4 หลายเดือนก่อน

      @@jasonPMR2 lock it with the pin

  • @kaloyanpetrov3428
    @kaloyanpetrov3428 9 หลายเดือนก่อน

    Does the oil pump need to be replaced when i replace the engine chain?

    • @yd2532
      @yd2532  9 หลายเดือนก่อน

      Doesn't have to just check it for wear

  • @MrSbu79
    @MrSbu79 ปีที่แล้ว

    Must there be a gasket under the top chain tensioner?

    • @yd2532
      @yd2532  ปีที่แล้ว +1

      With the latest design top tensioner from Nissan don't use the gasket

    • @MrSbu79
      @MrSbu79 ปีที่แล้ว

      @@yd2532 Great teacher, thank you!