Excellent video thank you. I only had a Spyder light set once, Volvo 850 headlights. The HALO LEDs were a joke and the beam pattern sucked. Spyder is cheap junk. I would not have known there was a difference in the foreign aftermarket brands if you didn't do this comparison. I always figured they were all cheap chinese re-labels. To Frank 16, you can put some bulb grease on them to help them stay in place. That's about all. It's really only for corrosion but it's worked for me in situations such as yours.
I am having some issues with one of my Spider tailights. The reverse light is intermittent and for the most part is off when I need it on. After watching your video I believe the pins in the plug are small and therefore are not touching well. Is there a fix that can make my pins larger?
Thx for the video very helpful
I recently bought Spyder taillights and I was wondering if you was having problems with hyper flashing and the “lamp out” code like I am.
That normally needs a resistor added
I added a resistor to each and it didn’t fix it.
Excellent video thank you. I only had a Spyder light set once, Volvo 850 headlights. The HALO LEDs were a joke and the beam pattern sucked. Spyder is cheap junk. I would not have known there was a difference in the foreign aftermarket brands if you didn't do this comparison. I always figured they were all cheap chinese re-labels.
To Frank 16, you can put some bulb grease on them to help them stay in place. That's about all. It's really only for corrosion but it's worked for me in situations such as yours.
Thank you, I will try that but if that doesn't work I'm sure I can buy an oem plug and replace the faulty one.
I am having some issues with one of my Spider tailights. The reverse light is intermittent and for the most part is off when I need it on. After watching your video I believe the pins in the plug are small and therefore are not touching well.
Is there a fix that can make my pins larger?
Outside of cutting the harness and replacing it, I do not believe so
I really wanted to hear what you had to say but what's with the obnoxious freaking music??? I couldn't make it through your review. Too bad!!!