If you '22+ refresh model guys stumble upon this, don't do it this way, especially if you don't want to destroy the letters. On 22+ refresh, the letters are part of a subassembly. Remove the plastic cover under the hood and then use about 1' of extension and a T20 to remove 5 torx head screws from the back and the block detaches, then you can release the clips from the back side of that block.
@@kev1424 Not sure what vents you're talking about but the procedure I describe, nothing else is removed. The entire plastic block holding the GMC letters comes off by removing the 5 torx screws on the backside of it.
Just installed this five minutes ago... It took about an hour. The most difficult part was "breaking" the grill free by pulling up on the clips (after removing 10mm fasteners). To hold the grill out away from the frame II used large Irwin clams set up in a reverse (spreading) layout. This gives about 3"-4" of space before the upper bumper assembly starts to disconnect. Pay attention! The 'GMC' emblem came off pretty easily using a plastic scraper (came with my wife's pizza stone)as a wedge, and a small stubby flathead screw driver to disconnect the clips. This was very easy to install/connect with the video tutorial. Note: the lighting is not visible in daylight. It must be dusk/dark for you to actually see it.
I took me maybe 20 minutes to remove the factory GMC letters, but I was able to use a small screwdriver and removed each entire letter from the backside of the grill and didn't damage the factory ones at all.
When our mechanic went to get his ase certification, this was years ago but anyway he said the instructor referred to gmc as gotta mechanic coming. Being a gm man I didn’t find it very funny but just thought I would share it. Now that I’m in my early 50’s I have figured out that regardless of the brand, it boils down to maintenance on a regular schedule including transmission and especially air filters oil and quality good oil of the proper weight and not driving it like your on a race track. That works on Ford and GM anyway.
@@Donslife I’ve never had a Dodge but their good looking trucks. I’m scared to buy anything now with the world in such a mess. I heard gas will be 8 bucks a gallon in August. Who knows, I’ll just keep trusting God.
Just install the illuminated emblem on my at4. Thanks for the video. It made my install easy doing it the way you did. Thanks again. Happy thanksgiving to you and your family
I literally wait till u post videos, I love what your doing with the truck I have the same one. I ordered the grill from the link you left, gonna have it Painted to match. But might leave the GMC logo red to match the hooks
Hi Don, I love your videos you were talking on one of the videos about decommissioning the often on switch when you’re at a stoplight I also find it very annoying when the motor shuts off and on is it possible to give me some info how I can do it on my GMC 2023. You remind me of myself I always like to change my vehicle to be different. Cheers cheers.Art
Thanks for the support. Here is the video and the links to the company’s website should be in the description. They will have details for the install for your specific truck too. Auto Start Stop Eliminator / Bypass GMC Sierra AT4. Full Review and Installation! th-cam.com/video/FGq25E2fRWU/w-d-xo.html
Had this on my Denali. It kind of got lost in the grille visually as there is no chrome trim to make it pop in daylight. Just looked like a black hole in the center of my grill. So I swapped it out for the regular black emblems with chrome trim. But one thing I did do was paint match my grille surround. I did love the look at night with the emblem but in the day I hated it. Yours looks great with your color scheme. It was a pain to remove the emblem but I did it
@@Donslife well I appreciate your videos. Glad I found your channel! I was gonna rip into the grill and go the hard route. Thank you for making it easy!
So when I installed this on my 2023 Elevation I fed the emblem connector through movable vents behind the grill. I guess it restricted the movement of the blades and my engine light came on! Any suggestions on how I can reach the connector at the back of the emblem, disconnect it so can put the cable in front of the vents, and reconnect it to the emblem? I wish I had seen your video before I began my install-I broke a tab on the grille behind the C when removing the original letters!
It can be difficult to install if you are unfamiliar with disassembling grills and stubborn clips. You should be able to plug in behind either headlight.
I have a 2020 gmc at4 and for some reason the new lighted emblem from gmc isn't clicking in... A couple of the tabs grabbed but the rest just pop right off!!! Any chance you know what's going on?
@@Donslife Well, I was able to get it to click into place. But definitely wasn't easy like your video lol. I had to take a long flathead and go from behind to push the clips on one at a time. They clicked into place and it seems to be locked on well. The car wash today will be the real test 🤞🏼🤞🏼🤞🏼🤞🏼 Definitely looks cool at night I will say. Not too bright at all, just right. Thank you for your instructional video 💛
Awesome gonna have to get this put on my 2020 GMC it's black I have it all blacked out I recently got the fender flares around the rims painted and it looks much better I hate how they just left them that plastic and didn't color match them
I am really liking mine. I have a quick video coming where I covered the letters in white to match the grill I painted. It looks even better now with the theme I have going
@@Donslife awesome man I'm all the way from Texas I have just the 1500 texas edition I have a leveling kit on it I'm looking in to wheels and tires for my next move
I noticed they have a few options when buying Red/Black but they also have a with or without pro tailgate option , so my question is what difference would it make ? And don’t all AT4s come w/pro tailgate ?
Yes there are some options. The main reason black has the extra replacement for the tailgate is so you can have black at the front and back. If you are just upgrading to the red illuminated logo, then you’d only want one since the back is already red too. I wrapped the inner part white on mine
Thanks - It will fit if it is the 2019-2022 body style, not the refreshed 2022/2023. There are reports of these failing from moisture penetration issues
Not sure which section you are specifically referencing but many of the connectors use red colored locks. These have to be slid or pried outwards so the release buttons can be depressed to pull the connectors apart
@@Donslife yes! Pull the red tab back towards the wiring, press down black piece directly below the red tab, pull. I’ve gotten it several times using the emblem wiring, but having difficulty specifically with disconnecting directly from the headlight.
Google tells me 2021-2022 for the 2500’s. Its a GMC part : accessories.gmc.com/product/front-illuminated-gmc-emblem-in-red-84741557?year=2021&make=GMC&model=Sierra%202500%20HD&categoryId=98048
You can turn the fog light on or off with the DRL’s only if you want. When it gets darker outside, the ambient light sensor will turn the low beams on too automatically. (All of the above in the AUTO setting)
Any chance you know where I could get that front grill that you have? One of the links doesn't exists anymore and the other is sold out. Looking to buy and paint it white
Hi Don I’ve had to replace two of these luckily under warranty I think due to the frequency of car washes and water intrusion it starts with getting dim then one letter going out finally whole things goes out. Curious if you badge is still working
Yeah, you are correct for some reason the 2019 isn’t listed but the 2020 and 2021 are. Strange. I am not sure what exactly isn’t compatible. Mounting tabs? Wiring harness? So man, I don’t know.
Hi Don, I like your Chanel a lot , lots of good info, I want to do all of the mods that you have done to your AT4 , I have a question I bought a 2020 SLT 5.3L, that don’t have the technology package , can that be added on .. thanks again Don
Hey there! Thank you for the support too! Unfortunately I don’t think there is a simple way to add the package. It would likely require a donor truck for all of the parts and an expert in all of the complicated integration that would be needed. Maybe I am wrong
Hey don, let me start off by saying love the channel! I like all the great ideas…. I just bought a 2022 GMC Sierra SLT limited. So I ordered the gmc light up front emblem from the same place you got yours. There telling me they need to order it from GM and it will be delayed. Just wondering if you had any problems getting yours? Or how long it took to get yours? Thanks in Advance for the info. And keep up the great work!
You’d have to measure the space, most likely find a way to mount it and then tap in the wiring of a headlight. Definitely wouldn’t be plug and play. Might be a fun project!
I have a 2021 sierra. I am on my 2nd illuminated emblem (black illuminated emblem). Both have lasted less than 6 months and continue to somehow get water in them. Ordered and installed through dealer both times. Both times part was on back order. A bulletin was put out about these also shorting headlights out. It was a total waste of money and time for me. Anyone else having this issue?
I love your videos and mods that you do. I want to do the illuminated emblem on my 19 Denali but they said they don't sell it at the dealer. I was hoping that maybe you knew the reason why since you had already done one on your 20. My bad I just saw your reply to my older comment. I'm sure mine is the newer body style.
They just found one for my 2019 Sierra Denali they said they may have to tap in the wires but they did not. It was plug and Play because my pickup was later 2019.
The illuminated logos vary in price depending on red or black letters. I think about $300USD is where they start - right from the dealership. My Tires are the factory 265/65/18. I installed 1.5" spacers and made a video too
Will these work on other GMC vehicles? I would love this on my Acadia AT4 2022. That and I have been scouring for AT4 black decals not silver that comes standard or even just Acadia in black, not silver. Any leads?
linktr.ee/donslife - Links to all of my products and discounts
👨⚕️
If you '22+ refresh model guys stumble upon this, don't do it this way, especially if you don't want to destroy the letters. On 22+ refresh, the letters are part of a subassembly. Remove the plastic cover under the hood and then use about 1' of extension and a T20 to remove 5 torx head screws from the back and the block detaches, then you can release the clips from the back side of that block.
What is a refresh model ?
@@thedavis3270 The new body style. Then non-LTD, often referred to as 'refresh'
@@klutch14u yeah it is way easier to do it this way... and btw homie aint nobody saving those emblems...
Does this detach the movable vents behind the grille?
@@kev1424 Not sure what vents you're talking about but the procedure I describe, nothing else is removed. The entire plastic block holding the GMC letters comes off by removing the 5 torx screws on the backside of it.
Just installed this five minutes ago... It took about an hour.
The most difficult part was "breaking" the grill free by pulling up on the clips (after removing 10mm fasteners). To hold the grill out away from the frame II used large Irwin clams set up in a reverse (spreading) layout. This gives about 3"-4" of space before the upper bumper assembly starts to disconnect. Pay attention!
The 'GMC' emblem came off pretty easily using a plastic scraper (came with my wife's pizza stone)as a wedge, and a small stubby flathead screw driver to disconnect the clips.
This was very easy to install/connect with the video tutorial.
Note: the lighting is not visible in daylight. It must be dusk/dark for you to actually see it.
I took me maybe 20 minutes to remove the factory GMC letters, but I was able to use a small screwdriver and removed each entire letter from the backside of the grill and didn't damage the factory ones at all.
Without taking off the grill! You are the king 👑. Good job! Bonus for sure
Video or your 🧢
Brutal watching you destroy the existing GMC letters, started watching videos on this specifically so I could keep mine.
Because of your input, I just bought a 2023 at4. This is the first accessory I’m purchasing.
Thanks for the videos with the Canadian flashlight! ❤️
I just used a thin blade saw and was able to cut the clips. Easy peazy.
Good tip!
Looks so good. I have 2019 at4. Looking for ideas to make my truck more personal . Thanks for sharing your ideas.
Happy to help!
When our mechanic went to get his ase certification, this was years ago but anyway he said the instructor referred to gmc as gotta mechanic coming. Being a gm man I didn’t find it very funny but just thought I would share it. Now that I’m in my early 50’s I have figured out that regardless of the brand, it boils down to maintenance on a regular schedule including transmission and especially air filters oil and quality good oil of the proper weight and not driving it like your on a race track. That works on Ford and GM anyway.
I have had a Ford, Lincoln, Chevy, Dodge and GM trucks and I agree.
@@Donslife I’ve never had a Dodge but their good looking trucks. I’m scared to buy anything now with the world in such a mess. I heard gas will be 8 bucks a gallon in August. Who knows, I’ll just keep trusting God.
We beat the crap out of our trucks at my job and I can honestly say the GMs hold up the best.
ordering my part today!! great video. Dealer charging $130.00 for install! No Sir! Dan got me covered!
Dan is a heck of a guy 😊
@@Donslife I just saw this! This definitely should have Said Don! My apologies sir
@@Donslife ha! I get it Dan
Man, I wish they made something like this for my 2015 Escalade. Sweet video.
I suspect they eventually will on newer ones! If they had it for our 2016 Escalade, I would have it installed already 😃 Thanks for watching
Just install the illuminated emblem on my at4. Thanks for the video. It made my install easy doing it the way you did. Thanks again. Happy thanksgiving to you and your family
That’s awesome! You’ll love the looks 👀 whenever you pull into a crowded parking area at dusk or night
RED LETTERS BABY! Love it.
I see you decided to pull the red lettering out. Much easier trust me!
I started to take the grill out and changed course when it came to pulling the clips out closest to the headlights. 😊
Just did my AT4...FIRE!
🔥
Very NICE add on , love GMC , would like to do that on my 2008 Sierra but wonder if it will ever fit , Thanks !
Unfortunately it won’t fit anything outside of 2019-2022 (same body style/headlights as mine).
I literally wait till u post videos, I love what your doing with the truck I have the same one. I ordered the grill from the link you left, gonna have it Painted to match. But might leave the GMC logo red to match the hooks
Wow, I am flattered! I have lots of plans and ideas coming! I hope you’re enjoying your truck!
Very nice detailed video! Thanks it’s going to help me a lot . Awesome truck btw
Thank you sir
Wow at least you can get to your headlights without taking apart the whole front
Hi Don, I love your videos you were talking on one of the videos about decommissioning the often on switch when you’re at a stoplight I also find it very annoying when the motor shuts off and on is it possible to give me some info how I can do it on my GMC 2023. You remind me of myself I always like to change my vehicle to be different. Cheers cheers.Art
Thanks for the support. Here is the video and the links to the company’s website should be in the description. They will have details for the install for your specific truck too.
Auto Start Stop Eliminator / Bypass GMC Sierra AT4. Full Review and Installation!
th-cam.com/video/FGq25E2fRWU/w-d-xo.html
Had this on my Denali. It kind of got lost in the grille visually as there is no chrome trim to make it pop in daylight. Just looked like a black hole in the center of my grill. So I swapped it out for the regular black emblems with chrome trim. But one thing I did do was paint match my grille surround. I did love the look at night with the emblem but in the day I hated it. Yours looks great with your color scheme. It was a pain to remove the emblem but I did it
I am going to try the white vinyl over the black letters. I think it will help it in the daylight.
I want to add this to my Denali .. what website do I order from ?
@@BluetickOutdoors gmc’s website
Mine just pryed out. Real slow and easy. No drilling required
You are fortunate. I went the dramatic route obviously 🙄
@@Donslife well I appreciate your videos. Glad I found your channel! I was gonna rip into the grill and go the hard route. Thank you for making it easy!
@@terpencar super glad to have your support! Enjoy 😊
Great video. Always look professionally done. Another great thing is it's GM, so you know it's going to ft. Thanks again.
It fits but beware 13 months later it started to flicker and only carries a 1yr warranty if installed post delivery
Awesome video how did u change that grill piece from black to white do you have a video ?
Right here sir: Custom Mesh Grill GMC Sierra AT4 / SLT - Another Do It Yourself Project
th-cam.com/video/_WUArnKMveI/w-d-xo.html
So when I installed this on my 2023 Elevation I fed the emblem connector through movable vents behind the grill. I guess it restricted the movement of the blades and my engine light came on! Any suggestions on how I can reach the connector at the back of the emblem, disconnect it so can put the cable in front of the vents, and reconnect it to the emblem?
I wish I had seen your video before I began my install-I broke a tab on the grille behind the C when removing the original letters!
I have the red one. Best money spent!
Nice! I just put the white vinyl back on mine. Makes it stand out more in the daytime. Video coming later this week
Please tell me were you two broth it from
@@bigjerry8083 any GMC parts department can get you one. It is a GMC factory made accessory.
@@bigjerry8083 you won't regret it if you buy it. Guaranteed
Why won't these fit 2015-2019 yukon grills ?
🤷🏻♂️
Now they need to make one for the 2021 AT4 Canyon. Looks lit.
Agreed! Be cool if they did!
Bad a$$!!! If I had a GMC I would definitely do this mod.
Ya I really like it!
I got the one for the Silverado and love it
Nice 👍🏼
Is it hard to install and does it matter which side you connect the cable to a head light
It can be difficult to install if you are unfamiliar with disassembling grills and stubborn clips. You should be able to plug in behind either headlight.
So does it only turn on when the headlights are on? What about when you unlock the truck?
It turns on when the daytime running lights are on
I have a 2020 gmc at4 and for some reason the new lighted emblem from gmc isn't clicking in... A couple of the tabs grabbed but the rest just pop right off!!! Any chance you know what's going on?
Sounds strange my friend. I don’t know why it isn’t grabbing unless the clips are bent out of alignment
@@Donslife Well, I was able to get it to click into place. But definitely wasn't easy like your video lol. I had to take a long flathead and go from behind to push the clips on one at a time.
They clicked into place and it seems to be locked on well. The car wash today will be the real test 🤞🏼🤞🏼🤞🏼🤞🏼
Definitely looks cool at night I will say. Not too bright at all, just right.
Thank you for your instructional video 💛
I am pleased to hear it seems to be working out for you!
Awesome gonna have to get this put on my 2020 GMC it's black I have it all blacked out I recently got the fender flares around the rims painted and it looks much better I hate how they just left them that plastic and didn't color match them
I am really liking mine. I have a quick video coming where I covered the letters in white to match the grill I painted. It looks even better now with the theme I have going
@@Donslife awesome man I'm all the way from Texas I have just the 1500 texas edition I have a leveling kit on it I'm looking in to wheels and tires for my next move
Is that the normal at4 grille? Because my grill doesn't look likes yours does and it's also an at4 diesel
It is a grill overlay. I have links to everything in my videos and linktree
I noticed they have a few options when buying Red/Black but they also have a with or without pro tailgate option , so my question is what difference would it make ? And don’t all AT4s come w/pro tailgate ?
Yes there are some options. The main reason black has the extra replacement for the tailgate is so you can have black at the front and back. If you are just upgrading to the red illuminated logo, then you’d only want one since the back is already red too. I wrapped the inner part white on mine
Is this so the Tow truck has light to hook it up?
Yes!!!!! 😂
Beaultiful, i really like the way it looks.
Definitely doing that to my truck
It turns heads
Could it be wired to the running lights instead? I bet it would look really nice in the evening without the headlights on.
I suppose you could splice the wires for that purpose!
Might want to plug it in and check it before you snap it into the grille.
Good call
That made a big difference! I like it!
Nice! I agree!
Will those also work on tailgate emblem?
No sir. And if it did, legally, you can only have red lights
Hello , do you think it’s possible to hook up this emblem to power wire and have a switch in the truck so you can shut it off as you want ?
Yes, but you’d need to splice into the wires. Definitely doable though
I need that done to my AT4.
Just a hard part to find right now
Awesome mod, is the part number the same for a 22 denali ultimate?
If it is the same front end (non-refresh), I think it should be
So I just ordered this. Also have the boost auto running boards. How did you connect this emblem and the steps since they all go to the headlights ?
What makes it only fit the newer model sierras? I have a 16 and want to do this and I’m just wondering why this wouldn’t fit?
The plug and play harness and where the clips are located. I’m sure it could be modified
Awesome work, I would like to do this on my 2019 sierra Denali will it fit or will I have any issues?
Thanks - It will fit if it is the 2019-2022 body style, not the refreshed 2022/2023. There are reports of these failing from moisture penetration issues
You think fits to my gmc terrain 2021????? Please let me know.. and where i can find the emblem with light?
Sorry I don’t think they have it available
I hope I can fine one for a 2013 GMC 2500hd Duramax.
Next is the back one in red lights in GMC!!!?
If a red one was available for the tailgate. I would probably try it out!
Will the wiring harness that hooks into the headlights work on a 2018 GMC Sierra SLT?
Unfortunately the product is plug and play for the newer headlights 2019+
I want one for my 2020 Yukon Denali they say not compatible
That’s because this one if for a GMC Sierra. 2021+ Yukons might have something available
you can remove it with a stiff trim tool..doesn't need all that drilling
Absolutely it is possible but you still will break portions of the old emblem. The way I chose was so much fun though!
Will this fit my 19 gmc sierra 1500 slt? And where do I buy it?
It will only fit the new 2019-2022 body style. They have a 2023-2024 version too. Check out 404parts.com
What is the trick to getting the headlight adapter unattached? It’s incredibly difficult to remove.
Not sure which section you are specifically referencing but many of the connectors use red colored locks. These have to be slid or pried outwards so the release buttons can be depressed to pull the connectors apart
@@Donslife yes! Pull the red tab back towards the wiring, press down black piece directly below the red tab, pull. I’ve gotten it several times using the emblem wiring, but having difficulty specifically with disconnecting directly from the headlight.
Did it come with wire harness ?
Absolutely
Hey boss will this method work for a 2020 2500 denali? Same drill points?
Google tells me 2021-2022 for the 2500’s. Its a GMC part : accessories.gmc.com/product/front-illuminated-gmc-emblem-in-red-84741557?year=2021&make=GMC&model=Sierra%202500%20HD&categoryId=98048
Are they available for 2015-2020 Yukons?
No, just 2021-2022
They are prone to getting moisture in them and will slowly start to dim and fail, I'm on my second set now
I had better keep an eye on mine. Hopefully that won’t be my experience
@@Donslife maybe some silicon around the edges will stop the water getting in.
I was thinking the very same thing!
Do you know if they make this for the 2018 Sierra Texas Edition? The part number is only for 2020 and 2021 model years.
Unfortunately they don’t at this time
Would this work on a canyon???
Unfortunately not
Looks awesome !! Can’t wait to get my at4 :) does it come one with the daytime lights or when the head lights come on ?
You can turn the fog light on or off with the DRL’s only if you want. When it gets darker outside, the ambient light sensor will turn the low beams on too automatically. (All of the above in the AUTO setting)
Any chance you know where I could get that front grill that you have? One of the links doesn't exists anymore and the other is sold out. Looking to buy and paint it white
Ninte was the brand I ordered. Try GR1performance if you haven’t already. I checked them out, but shipping to Canada wasn’t feasible
Very detailed video, nice look. 👍 love those rims. ✌️out.
Thanks 👍
Hi Don I’ve had to replace two of these luckily under warranty I think due to the frequency of car washes and water intrusion it starts with getting dim then one letter going out finally whole things goes out. Curious if you badge is still working
How long do they usually last before going out?
@@ChilesSupportTV first one lasted about 5months the second one lasted about 7months
Unbelievable
@@michaelpohl3247 At $350 a pop, that's not good at all.
I forgot to mention GMC will warranty as long as vehicle has less than 36000 miles and they installed it
hei great video, where can i get or how i made the double arness, thank you
GMC Genuine part. Backordered though because it is super popular
Great channel Don!
Thanks Paul
Hey do you know if this will fir a 2020 gmc elevation 1500?
Yes - 2020 GMC Sierra 1500 AT4, Base, Denali, Elevation, SLE, SLT 2.7L L4 - Gas, 4.3L V6 - Gas, 5.3L V8 - Gas, 6.2L V8 - Gas
@@Donslife thank you so much,
Do hey have one for 2007/2012?
Unfortunately nothing made by GM. Maybe an aftermarket item on ebay or something
I checked for the red illuminated emblem for my 2019 SLT says it don’t fit
Is it the new front end body style like mine?
@@Donslife yes sir 2019 w the new body style
Yeah, you are correct for some reason the 2019 isn’t listed but the 2020 and 2021 are. Strange. I am not sure what exactly isn’t compatible. Mounting tabs? Wiring harness? So man, I don’t know.
@@Donslife I’ll take pics of my harness see if it matches yours. Been wanting that emblem for some time now. Thanks for ur reply back
Do they make these for a 2007 sierra slt?trying to find one and no luck
Sorry they do not
Good video just bought this kit for a 2021 2500 slt
👍🏼
Nowhere says what size it is. Does anyone have a measurement for this product? Fron edge of chrome?
That’s really cool,
Where can I order one I’ve looked on Amazon and eBay already ?
Your closest GMC Dealership. They are a OEM option. Might be on backorder now
Do you know if it'll fit a 2017 yukon
Unfortunately this one won’t fit
Are there any available for a 2005 sierra?
Not that GM makes. Probably aftermarket options exist. Ebay or Amazon?
Hi Don, I like your Chanel a lot , lots of good info, I want to do all of the mods that you have done to your AT4 , I have a question I bought a 2020 SLT 5.3L, that don’t have the technology package , can that be added on .. thanks again Don
Hey there! Thank you for the support too! Unfortunately I don’t think there is a simple way to add the package. It would likely require a donor truck for all of the parts and an expert in all of the complicated integration that would be needed. Maybe I am wrong
@@Donslife thank you Don , be safe and keep trucking 👍
Do u think it will fit a 2017 gmc ?
Sorry it will not fit that body style
Do they make a universal Bow Tie Light Up?..I've got a 2002 S10
I don’t think so. Not OEM anyway. I know some aftermarket ‘ebay’ stuff might exist, but the quality probably varies
What year is your pickup? I called dealer to get one for my 2019 Denali they could not find one.
2021. It has to be the new body style 2019. There were two body styles in 2019
Hey don, let me start off by saying love the channel! I like all the great ideas…. I just bought a 2022 GMC Sierra SLT limited. So I ordered the gmc light up front emblem from the same place you got yours. There telling me they need to order it from GM and it will be delayed. Just wondering if you had any problems getting yours? Or how long it took to get yours? Thanks in Advance for the info. And keep up the great work!
Thanks man! I was lucky to enough to order from my local dealership and it came from a city about five hours away within a couple days.
Do they have on for the 2019
@@m.dmiranda13 2019, 2020, 2021, 2022 New body style only. Will not fit the 2014-2019 series
I have a GMC Yukon denali XL 2019, I don't find such a led logo for my model ? do you know where I can find it ?
Brother would this work on a 2011 sierra 1500?
Unfortunately no it won’t. 2019 and newer
Can I get this for the new Canyon AT4
Will this work on a 2008 gmc they don’t change the gmc emblem that much I would not think
You’d have to measure the space, most likely find a way to mount it and then tap in the wiring of a headlight. Definitely wouldn’t be plug and play. Might be a fun project!
Hey man did you ever see if it would work I also have a 2008 Sierra and was wondering if it would fit mine
@@paulmenefee2998 it won’t fit without heavy modification and wiring
I have a 2021 sierra. I am on my 2nd illuminated emblem (black illuminated emblem). Both have lasted less than 6 months and continue to somehow get water in them. Ordered and installed through dealer both times. Both times part was on back order. A bulletin was put out about these also shorting headlights out. It was a total waste of money and time for me. Anyone else having this issue?
I love your videos and mods that you do. I want to do the illuminated emblem on my 19 Denali but they said they don't sell it at the dealer. I was hoping that maybe you knew the reason why since you had already done one on your 20. My bad I just saw your reply to my older comment. I'm sure mine is the newer body style.
Lots of info here: 2019-2021 should fit with the same part : www.gm-trucks.com/forums/topic/234437-illuminated-gmc-emblem/
Hello I jus purchased a 2015 yukon denali I want to install the illuminated emblem can you please guide me?
They just found one for my 2019 Sierra Denali they said they may have to tap in the wires but they did not. It was plug and Play because my pickup was later 2019.
Unfortunately I don’t think they make one for your Yukon. The newest body style I believe they do though
@@kellydixon1893 will it work for my 2020 denial
Is there one made for a 2011 gmc terrain. I can't find one
Not that I am aware of. It is a newer item since 2019
@Donslife could you measure it and see how long and how tall it is?
@@devynsheets5274 I can later, but I am pretty sure I put the measurements somewhere in the comments over a year ago.
@@devynsheets5274 I haven’t heard of anyone making it fit on another model other than 2019+ Sierras
Have you had any headlight issues?
Funny you mention it. I thought I noticed a purple hue on my driver’s side DRL the other day but now its gone
How much did it cost and what size tires are you running
The illuminated logos vary in price depending on red or black letters. I think about $300USD is where they start - right from the dealership. My Tires are the factory 265/65/18. I installed 1.5" spacers and made a video too
I have a gmc yukon denali 6.2l 2015 do you have part number for it
So does it work with the DRL or do you have to have the headlights on?
The emblem uses the DRL signal so it is always on
Nice and clean job 😊
Thanks, I appreciate it
Will these work on other GMC vehicles? I would love this on my Acadia AT4 2022. That and I have been scouring for AT4 black decals not silver that comes standard or even just Acadia in black, not silver. Any leads?
Gmc only makes some black emblems for the Acadia. Nothing illuminated that I am aware of. Sorry no leads that I know of
@@Donslife do you know of door decals that are black ( AT4 or Acadia) . The ones on driver side door and passengers door or on tailgate
Try this site maybe : www.0fx2gv.com/
The ones on the Acadia are silver or silver and red
Have a look at his instagram. He makes pretty much anything ‘0fx2gv’
Can this be done on a 2017 Sierra?
Unfortunately this part is only available on 2019+ new body style Sierras. Also some Yukons as well.
Where fo i get this light emblem??
404parts.com
Will this fit on my 2011 yukon???
Unfortunately no 😞