Milwaukee M18 Fuel High Torque Impact Wrench put to the test
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- This is the all new Milwaukee M18 Fuel High Torque Impact Wrench. I believe they had some issues with the previous model, but this just made it all better.
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
Buy here
Toll Only shrsl.com/4akdk
Milwaukee High Torque Impact Wrench Kit shrsl.com/4akdm
M18 FUEL ½” High Torque Impact Wrench w/ Friction Ring Kit includes the most power dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque and 1,500 ft-lbs of Nut-Busting Torque when paired with our M18 REDLITHIUM XC5.0 Battery, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL ½” High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. Our patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Friction Ring design allows for quick & tool-free socket changes. The M18 REDLITHIUM XC5.0 Resistant Batteries included provide increased protection against oils, greases, & solvents.
Most Power Dense - Best Combination of Power and Size.
POWERSTATE Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-lbs of Nut-Busting Torque w/ M18 REDLITHIUM XC5.0 Battery
Up to 2" Shorter Length. 7.6" in length provides most access in tight spaces.
Fastest Removal Speeds. Maximize productivity on the jobsite and in the shop.
Patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack
Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
4-Mode DRIVE CONTROL provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
Bolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750 RPM for more control when removing fasteners
AUTO-SHUTOFF control prevents over tightening and increases productivity by applying no more than 50 ft-lbs of torque
2967-22
#milwaukeetool #impactwrench
I watch this with my wife and we convinced her to get me one
😅😅😅😅me too
This is gonna come in really handy for oil changes.
Are you an express tech 😂
especially for putting the drain plug back in real good (not just for taking it out)
@@xsixinfantryxmight as well put an oil filter socket on it and run that down too so that everything is to spec😂
I do a lot of 350,450,and 500 foot pound torquing at work weekly. Heavy Duty Commercial Truck Mechanic.
I've used Snap-On and Oldest Milwaukee M-18 1/2 inch drive batt. operation impacts that have failed.
Buying one of these to see how it lasts. Thanks for encouragement in confidence to get one.
This impact wrench loosened bolts torqued down to 2400 lbs. Setting 1 is approximately 650 ft-lbs, setting 2 is 900 ft-lbs, and setting 3 is 1200 ft-lbs with a Forge battery. It's a monster, especially for a 1/2" impact wrench. It outperforms some 3/4" impact wrenches.
I’d give you a second thumbs up for humor and entertainment value. Most tool reviews are mind numbingly boring.
🤣🤣👊 Thanks AB
I saw a lot of videos from auto mechanics, not even tool review channels, that noted the problem with that model that was breakdown prone.
But i still took a chance on this new compact. I'm a plumber, not a mechanic and I'm using this with fairly large sockets for taking off cast iron cleanout caps that are rusted over from decades of not being used.
Everything has come off. Before I'd be telling clients that the cleanout tee had to be changed.
I'm using it with the McTwista and the PlugTwista socket set from Toolceptions. Expensive, but crucial!
Appreciate the feedback 👊👊👊
FYI - using it with their largest battery, the 12. Don't have the new stack lithium Forge batteries yet
The largest socket i use is 2-1/2 inches i think, for 4" raised head clean out caps (which are really plugs because they screw interior to the fitting not exterior tread.)
Exactly what I need for my bicycle
Haha
Bmx or Huffy 10 speed?
Cant wait to try this at work (lowes) for assembling customer grills/patio furniture/ lawn equipment
@@maxthomas498 🤣🤣
Nah Lowe’s assemblers don’t even use tools they be righting thing with their bare hands 😂 everything put together loose af
Thanks for helping me see the light Clint . LED light . Three of them ! Right in my face ! 😎
Hahaha
Just ordered one today. Cant wait for it to show up
Just ordered mine. How do you like it?? Gonna be doing work on the jeep
@dragonbulley I have put mine through hell. It won't let you down and is worth it's weight in gold
I have used the same impact gun for the past 3 years now every single day as my job requires my gun all day long and its still going strong now, Great bit of kit.
This impact gun hasn't been out for 3 years.... You must have it confused with the previous gen.
Brother Clint I have 6 of the older model 1/2” drive and some 3/8” drive impacts and I’ve never had problems with them also if you use a 6pt. Shallow socket your torque wrench will be less likely to slip off the bolt… Stay Safe brother 🇺🇸👊🏼👊🏼🔨🪚👊🏼🇺🇸
I have the M18 Fuel 3/8" high torque from three years ago, bought specifically to shake loose some body bolts on my old wrangler. Probably paid for itself again while installing three overhead storage racks in the garage, although I did pre-drill for the lag bolts.
The high impacts are all just beastly. Really show the value in having the right tool for a job.
I would hope you predrill for lag bolts 😃
The prior 2767-20 was the best high torque for years, and was the tool that got many into the Milwaukēē line.
Then they decided to modify the unit internally last year trying to save $$, and it was a failure, and what you seem to be basing the whole video around.
Milwaukēē then pulled those with "serial # B" and went back to the OG design, and NO problems since then.
I bought 10 of them last month and zero issues (price was too good).
They came out with the new 2967-20 because other companies had caught up with their existing HT, as it is 6 years old. Might as well shave some length & weight like a Gen2 deserves, and increase its capability.
I think you are making it sound a lot worse than it was, and perhaps researched it a bit more. Especially since Milwaukee resolved those issues quickly at the time.
The 2767 was my first milwaukee and yes I was and still am hooked... I did just order the 2967....
Clint I’m making my wife buy this for my Christmas gift. Thanks for all that you do with bringing us sweet sweet tool reviews. I hit this like button soon as I start your videos because I know they’re going to be good and break my pockets 🥴😀😀😂😂
Hahaha, thanks so much Burnett, really appreciate you 👊👊👊
Wow clearly you did zero research on the previous 2767-20 model. It was the king of impact wrenches for a long time. They made a change to the internals about a year and a half ago and it made the unit fail a lot. It was quickly reverted back to the tried and true version and life was good again.
The B version
Both makita and dewalt make more powerful impact wrenches then the 2767, its the king of third place.
@@Nate-m8ydewt batterys suck ass . Friction rings on makita are rubbish i have all 3 guns milwaukee far better
He means the h96b model they attempted to silently integrate onto the market with a new hammer and anvil which could break unexpected ly
Also he didn't mention that the batteries included are oil resistant
Those belt hooks are good for tying the tool whilst up a ladder or scaffold.
I think it's time for me to get that new upgrade to replace my old M18 1/2" impact wrench.
Smeesh that like button. 👀👉🏼 👍🏽
Thanks for the comment and SMEEESH Jason!!!!
That's real nass like, Clint!
Never had major problems with my Milwaukee’s. I own 6 of them atm at my tire shop. And they have lasted 5 years of constant use . More than my snap ons that only last a a year or so and are 5 times the price
I guess that one will be ok to bust off my Civis’s crankshaft pulley bolt. The ones of you with Civics most possibly know what I’m talking about😀
This is exactly why I'm looking into an impact. Lol I've got an accord.
@@dakotamclees9823 good luck.
@@ruinunes8251 just bought one. Thanks!
Video interaction initiated. You're welcome Milwakuh iyay!
I bought it last week and was very impressed
Appreciate the feedback and like the name 👌
@@ToolReviewZone Maybe one day we will meet. Coincidentally, the channel names are quite similar. I'm in Vietnam and I also learned a lot from you
Still have my OG Milwaukee 2767-20 and it is still a beast!!! My 3/4” is a banger as well but the OG 1/2” 2767 is still king . Really want the new shorter 1/2” because the length and lighting.
Currently have mine for sale on marketplace so I can get this new one
I have the Ryobi HP 1/2 and Kolbatl 1/2 neither could break the bolts on my lower control arm. Sold the Kolbalt kit and bought the 2967 kit plus the Forge battery. And let me tell you it was friken awesome at how easy this impact took those bolts out.
I work on sprinkler systems in my town and I bought one today don’t know if I’ll use it but I want it .
I bought this a couple months ago because I figure there should never be a fastner I'll attempt to remove that this wont be able to get. So far its been the case. Evern with a 2.0 battery it made quick work of a rusted on crossmember on my trucks frame that I wasn't able to break loose with a breaker bar. I also really like the leds and how it auto slows down after it breaks the fastner loose to so it can be 1 handed without destroying your wrist.
I have abused my Dewalt and it just says send me more Im sticking with my Dewalt. Thanks for the great vids though. I always look forward to your new Vids.
Dewalt 961 enters chat.
MILWAUKEE is HULK DEWALT is THOR
i was praying for your knuckles when you where torquing down
I bought this one today because I’m going to put a 3” lift including the upper control arms, struts and shocks and rear blocks as well and I didn’t have an impact wrench. I’m a quality over quantity individual and this will last me a long long time. Just in case something happens a repair manual and a Milwaukee Impact wrench is all I need😂 obviously I have craftsman wrench and impact sockets etc.. but this should be plenty for me. Next up Milwaukee powered ratchet.
Great job on this one. I have the earlier model and haven't had any problems with mine. I am retired though so I don't use it every day. If I need to replace it, I will gladly try out this new version.
I’m enjoying these kind of videos way too much, do i have a kid that I don’t know about? Am i a father at 19?
Black Friday sale digital torque wrench.
I'm guessing, but from what I read, the rubber battery mount is probably there to protect the battery from the vibration.
It was H96B version quietly updated from the original H96A proven model which they revert back without a official recall
5:23 oh we gettin fancy in here
Now I can’t stop calling them “bat trees”
Excellent 😎😎😎
Just subscribed! I like your channel I think you are hilarious! Thank you!
Thanks crp, welcome to the channel brother 👊
👀 at it
🤣
Gets me every time❗️
😫😆😎😎😎
lo e ya man made my day man ....lifes bin bummin me out and u just made me smile. hope yo aford one of these some day nice like😅
Glad I could make you smile dj 👊👊👊
HAVE IT and got a PROTECTIVE BOOT for it from HOME DEPOT and with the FORGE Battery it's has STRONG has the HULK but now DEWALT has the XR DCF 961 and it looks has STRONG has THOR and I want it next but I want to run a FLEX 6 amp STACKED LITHIUM or a MILWAUKEE FORGE Battery on it because the 5 amp Power Stack is WEAK
The rocking is a battery isolator that's been on the 1" milwaukee
Thanks for making this video, great review
Thank you for your time and knowledge 💯🤝
Really enjoyed this video watched all through. I have a question I just got the Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torque Impact Wrench with Friction Ring does this tool have enough power for me to safely tighten and loosen the 🔩 on my normal sedan car and tire 🛞 while tightening it tightly enough to feel safe? And for normal home and engine work??
Firstly, I really appreciate this comment, and also thanks for the question. The short answer is, absolutely. Thisbis exactly what it is made for. Hope this helps defining 👊
@@ToolReviewZone awesome! thank you for the response. Im excited. I will also get the high torque too...
The older rigid octane is the king
6:07 Gotta take credit when its due man. Enjoy the wins
'I don't think this is gonna work either..."
Rip
Reliability hasnt been what Milwaukee does since the corded stuff in the 80s...
Every time I'm at the scrapyard there's a pile of like 6 year old or newer Milwaukees and like 3 nicad dewalts that are 20 years old and maybe a really fucked 996
Genius computer brain is right.
🤣
If you put the new forge batteries on the old model will that improve it?
This isn't the dramatic emotional rollercoaster as the Flex video was
Unfortunately, my doctor said I need to stop taking getting so emotional in the videos. I really had to hold it on on this one 😪
You did not mention the increase in power using the new forge batteries. Not sure why Milwaukee kits this new impact with 5 ah batteries when the forge batteries increase the power of this impact!
They have both kits available it's called f by the enf of the item number
I own this impact wrench and it will laugh at 250 ft-lbs. It will say to you, "You clown, why are you wasting my time with these dirt-easy tests." I recently used it to change my front and rear shocks, and as I used it, I was afraid to use it to tighten all the bolts in the front drive assembly. This thing is just a monster.
The rubber mount for the battery protects the battery and handles electronics from excessive vibration and extends their life. The new batteries essentially have circuit boards in them. So you don't want to continually vibrate the battery up against hard plastic.
Only DeWalt's top 1/2" wrench, the DCF 961 has slightly more torque. But for all practical purposes, the two are equal as far as power. The Torque Channel tested them both and the DCF 961 beat the Milwaukee by approximately 20 ft-lbs, which is nothing. In overall ratings, the Milwaukee 2967 beat the DeWalt DCF961. The Torque Channel called this Milwaukee the new standard for 1/2" impacts.
i'm not sure a carpenter would work with this monster but surely's good for a mechanic kuz you always have the 2000 lbs torque impact driver that can do the job for the carpenter and i always wonder why no tool channel go outdoor to take a real test on an truck with rusty bolt to see the if it's gonna do the job on everyday nut
😂 I use this for Sheetrock
Im guessing that rubber is to stop it from shaking the battery off
Nice tool !!!!
I've had the last model for 2 years now and I've had no problems. I busted loose bolts that my 3/4 " pneumatic snap on junk couldn't do.
Great video , do you have any info about the torque wrench and the digital meter that you use , any link where we can find it!??
I bought the Husky torque wrench 250flbs at home depot and the digital meter at Harbor Freight 👊
The digital meter is from harbor freight by quinn. Pretty accurate paid 40$ with their quinn coupons
Never had a problem with mind. 4 years now
Very interested in this review. I'm thinking about getting a Milwaukee tool set and I want to know if it's worth the investment
It’s most definitely worth the investment I have Milwaukee,Ryobi,and Dewalt for different applications. Milwaukee never fails even the brushed tools are good if your not using them everyday. If you are I’d definitely recommend getting the brushless tool set now during all the Black Friday deals. That’s how I’ve bought all of my tools.
@BURNETTWEALTHGROUP Thanks man!
Definitely worth it. Since I bought my house in 2017 I started with the older 2767-20 version and now own almost all their lawn equipment. Some m12 stuff and all my batteries still work 7 years later. Keep in mind in the winter months I bring all my batteries in the house 💪
@@sharpie132 Thanks. Good idea with the batteries.
I just purchased the M18 8” bar pruning saw. What does that have to do with this? Well I’m trying to figure out how else I could use the 18v system. Was wondering if this would be ok or overkill for lug nuts as I change both my wife’s and my own wheels between a summer and winter wheel set up. Plus for doing brake jobs and stuff since we have 4 cars.
Probably a little over powered for that. Although I have the 2767 high torque and use it on lug nuts a lot. You just have to be careful because it WILL snap a lug off. Just use it on speed 1 for tightening and once it's snug check by hand. I'm not sure on this model but speed 1 on the 2767 is just about perfect for lug nuts. The good part about the high torque is it also works for much larger things. I've used it to rebuild hydraulic cylinders on John Deere backhoes and taking off very stubborn crank bolts on motors.
You might look into their mid torque or half inch stubby and see if that's enough for what you plan on. Bear in mind the high torque is pretty big and doesn't do tight spaces very well
The only impact tool I trust is my numatic Indersol Rand air Rench.
Cool Clint 😎
This impact is real nass like
TTI always hitting homeruns with red and striking out with green
🤣🤣🤣
Put a long pipe over your breaker bar to increase leverage and those pointed bolts your driving can be a pain in the ass to drive with hand tools
If you hurt that bad you must have been watching one of Vance's videos!
Hehe 🤣👊
If you wanted the very best you should have got the Dewalt DCF 961, the most powerful 1/2" and even beats the Milwaukee 1"
Awesome video, really Nass like
The only thing I’m disappointed in with all the m18 hand tools is the battery wobble you get, malita and dewalt batteries are always snug and milwaukee is always moving around
Interesting, I've never noticed that, but I'll check it out 👊
its not horrible but its gets worse the more you use your tools, my 1/2 inch high torque impact loses connection from the wobble sometimes @@ToolReviewZone
@@Danielxperez14it sure does but it took 3 years to get that way I use it 6 days a week I guess I can't complain
@@roblowman2740 my 2767-20 high torque got it in less than a year with the xc5 batteries, its my main powertool for most things and my last high torque had the same issue just cant finds the receipt to warranty it
You have no idea what you're talking about. You said the previous model was bad when it was actually killing the competition with snap on. You never owned it and want to say it was bad. It was the best impact ever. Never gave me any issues. I even used 3/4 and 1" adapter for bigger nut breaking
250 is where you should have started mate :))
I am done with Home Depot, tried to return a tool with a gift receipt for in store credit and they wouldn't give it to me. What a joke. I had to have the person who brought it to go there and complain, she couldn't believe that it's there policy Why give a gift receipt?
I don’t get the point of this video. 250 ft.lbs on the torque test? Then driving bolts into wood. That gun with a forge battery is a monster. It’s capable of a lot more than what’s shown in this video. The size and weight are still an issue but that can be said for all battery impacts. But if I can fit it in on what I’m working on I definitely use it.
I'll wait for you to make a better video....but you won't
I'm more interested in your meter
I bought that at harbor freight. They have a few different models
That is a hell of an ugadugga
Shoot I'm late. I'm not first this time and that's not real nicelike, but I'm here now
Appreciate you either of 81👊
Rapid chargers aren’t good.. the faster you charge any lithium battery the more strain you put on it.. as a career technician I expect to get a minimum of 5 years out of a battery using it every day.. definitely won’t get that with a rapid charger.. you should have multiple batteries that further limits the need for a rapid charger
Great tool but they price way to high
But is shiney new Red impact🥹
0:16 jokes write themselves
Dewalt 961...... good luck all others
Makita is king
Yeah.... OK 😆🙄
Not a fan guy of any model, but the new dewalt still destroys that new Milwaukee
It’s not the most popular thing rn but hopefully people catch on the new impact is better
Trigger nice catch ❤!!!!