I had that dream and implemented it! I took of the wheels and added sharp blades, instead of doing it on the road I would do it on frozen lakes and rivers. So any wrong move and you would cut an artery and bleed to death or go through the ice and die of hypothermia.
I wanna make these and zoom down a busy street filled with cars and try not to get hit. Like a Mr beast challenge. 3 of us do it, last one alive gets £50
These are super clean and refined! I had made two (heavy, janky, and impractical) electric skate prototypes a couple years back after being inspired by Motorball from Alita: Battle Angel. Super dope to see how you made yours!
I actually love the fanny pack tether, the cables look badass and you cannot beat how sleek and normal the skates look. This is the best thing I have seen someone make in a looong time! Thanks for the awesome video.
so dope. I have been using my rollerblades as my daily driver lately, and eblades like these would definitely ease all the wheel wear down. there are 2 eblades on the market I know of at the moment, and I look forward to having even more options available by the time I can afford to buy them. seems like your design has equal speed and more range than the best current available option, big props!! subbed 👏👏😎👊
Congratulations, you accomplished all the goals on list and then some! 🏆 . Plus, they don’t look clunky, retaining a classic roller blade outline. Super cool!
It is coming. The age of Air Gears. Can't wait for the invention of the first Regalia. Who is going to be first to see the Wind Road? When I was younger and that anime first came out, I was like "No Way." Boy, I can see I was wrong the wrong wrong.
I am an avid skater and engineer and can relate to this nice build. Seems to me having a battery pack in a fanny pack is better than increased weight at your feet.
They look a lot better and go twice as fast as a brand that I've seen available that makes electric skates (frame attachment). Well done! I'm really excited to see how this technology progresses over the years. I'd love it if by the time I'm too old to skate much if I could have some electric skates which weighed the same and also looked the same. Maybe if we get bearing size hub motors and solid state batteries we could have electric skates that are completely indistinguishable from non electric skates like we sort of have with bikes
Very cool. You could use load cells between the wheel frames and the boot so they would operate like a self balancing hoverboard or unicycle. Leaning forward would increase speed in an attempt to centralize your weight. However this would drastically mess up your normal skate stride and require your legs to be side by side. Perhaps a throttle that detects the side load during your normal skating stride would work. So side load on the right skate would throttle the left skate faster. Seems like it would amplify your natural stride.
Good idea, Dan! I did attempt using load cells to detect if the skates were on the ground, but my frame was too rigid to get any reading out of them. I think they are still possible, but it would require a redesign of the skate frames. My plan going forward is to read the motor current and speed to detect if the user is pushing and if there is no load on the wheels. Thanks for the comment!
*granted I don’t have the money for it now*, but i would GLADLY buy a kit/prebuilt once, so that may be a neat thing to do. Granted Fun One Off Project -> Small to Mid Scale production may be hard, and also kill off the fun factor/be something you aren’t interested in. Either way, i just thought I’d throw that out there in case anyone else thought similarly.
this video is super sick! i love channels that make videos like this and i was incredibly surprised to see this was your first considering the script, editing, visuals, etc. were all high quality. i think you could reach more people if you make it clear that you MADE the rollerblades in the thumbnail or title. i'm not sure how much you care about the numbers, but i'd love to see a channel like this grow. (if the video already has 8%+ click-through rate, then just ignore me lol) either way, keep up the great quality and you'll grow regardless!
Thanks for the comment and the feedback! I may try something like "I MADE the Worlds FASTEST Electric Rollerblades" or "Building the Worlds FASTEST Electric Rollerblades" to improve click-through
I watched this video and I was thinking that looked like Davis, and then I saw the UC Davis sign when you rode past the basketball arena. Brings me back to my childhood when I lived there. Awesome video bro.
Woooooow. First of all this is great! Especially all your effort to making control unit and customisation of the motor. Second you are really hit the point of the “electric rollers” Great job.
Here for the rollerblades. Old die-hard Air Gear fan and just hoping that I can see them happen in my lifetime. Now, anybody else got this strange feeling that Collin here kinda very looks like James Franco or is it just me? hahaha loved the video
@@collinbardini i was considering making the plates for the motor core myself in a makerspace near me, but none of them have the capability to cut metal. then I thought about getting a local cnc shop to cut them for me but I couldn't justify the cost for multiple prototype runs. i love the chain solution, but I feel like its not as freeing as hub motors might be for something commercial. i also hate the noise, one of the things I like about blading is its quiet. still, great vid!
I have an ebike, and it feels pretty dangerous going 20mph. I can't even imagine going 24 on a pair of rollerblades! Awesome build, but I can imagine why they haven't exactly taken off as a safe and easy mode of transportation!
So happy I'm not the only nutty engineer! I worked on some clamp-on skates, managed to go a few miles along the Charles River in Boston. Electric was always the goal, to try to get the most fun in the most portable size possible. I still have a design CADed up but the price was..... Prohibitive lol. You are a badass!!
when I first entered the world of electric scooters I didnt know anything about the different types of motors and the balancing of wattage and voltage after building a couple scooters out of parts I had Im more seasoned you can say it still amazes me the options had a gas scooter who's motor was completely ruined stripped it down to the frame got the specific dimensions needed to weld on a plate for the 1000 watt magnet motor I had screwed in a heavy duty tote to rack on the back where I ran the controller and battery geared up the motor sprocket and voila 36v 1000 watt 20 amph it was fun can't wait to do another
Totally cool design...would be interested in the files. My thought in regards to one rollerblade taking off when lifted would be possibly having a ground disconnect/microswitch under your heel which cuts power to the blade when raised... also id use a single dual motor controller... the advantage to 1bms vs 2 is you can have higher voltage and amp as well as weight savings...
Incredible work Collin! Here I am trying to do the opposite, I'm trying to slow down my 110mm wheel blades because I can't slow down effectively LOL. I created a hand brake with a cable pulled brake caliper for my right blade that clamps on the two rear wheels. Your design is so elegant.
A thought, adding those spring loaded retractable spoolers to take up any slack in the power cable? It would help getting your cables safe while at any height (crouched to standing). This might add extra strain on the connectors on the boot. Also, polyurethane on a leaf spring to take up any slack in the chain might reduce the noise of chain meshing loosely with teeth.
If you're not planning on selling them, as in abandoning this project. Please make them opensource/openhardware. It will be interesting to see if others can build upon your platform to create an even more refined version!
Very cool! Have you tried looking into power tool, li-ion batteries considering how light weight they are? They also have a nice convenient holding slot you're probably able to utilize in using to attach them to each skate perhaps. And also by utilizing the slot of the batteries, you're then able to switch them out when the batteries die out on you on long trips. You'd probably want to try adding solar panels to charge the batteries as you go on top of your helmet as well, that way on sunny days you'll not need to carry with you extra batteries.
Add a fail safe. Radio interference can send you flying and hurting you or kill you. Very simple and nicely done 👍🏼 Elbows and Knee protection recommended as well. Millions have learn this the hard way having to live the rest of their lives in pain.
Thanks for the comment! A fail safe on the remotes/controller was one of the first things I added because you are 100% correct that you can end up in some very bad situations. One of the precautions that I have been taking is never going faster than what I can handle on normal skates. I usually brake a lot going down hill for example. Elbow and knee protection are definitely recommended and I will be purchasing some soon.
I’m looked I try to ask them to become a sponsored rider, and now I see many positive things in china. Also I’m on design of stick with wheel to ride on normal blades@@EricGonzalo
is the wear on friction drive that big of a drawback? I've always liked the idea since it lets you use the skates normally as well when you run out of battery, the guy that designed the thunderblade used the centrifugal force of the spinning motor to push it against the wheel, I thought that was pretty clever. also wanted to say, amazing build! and amazing editing and production value :) surprised to see it's your only video on this channel with this quality
Thanks! I put a lot of work into the video so I’m glad it paid off! I don’t explain it in the video, but I was also concerned about how traction between the motor and wheel could be maintained. I was thinking a spring mechanism, but the centrifugal wheel is really clever! Friction drives are certainly viable. However, I think chains/belts win for me personally.
This video is great, pretty impressive! I like how you explain everything really well and excited to see the things you build as your channel progresses. I always thought it would be cool if someone were to build some type of basic "any user" friendly electric platform that could be applied on more than one application. For example, lets say one day you want to ride and electric skateboard/longboard, next you wanted to ride and electric scooter or maybe mount to a bicycle for a little power assistance. Some how have a system could easily switch to these types of applications with only minimal mods needing to be done. I think it would be cool to see the different things users would come up with. Subscribed, Look forward to seeing more of these videos! Keep up the good work dude!
Very nice 👍 Of note, very thin v belts are available to use instead of a chain. If you get the tension right you shouldn't need a toothed belt for that HP level.
They could be very practical if they can clip into regular shoes quickly. Slip on the blades and ride around city/campus/work, clip them off and put them in your backpack, where the battery was also located
Thanks for the comment! You can use sesnored motors, but unfortunately mine did not come sensored and I did not find anything comparable that were. I am seeing if I can get them custom made, however!
Granted it would mess with ground clearance maybe, but making something like “conformal fuel tanks” but for batteries around the foot section may work. This would also lower your center of gravity (for better or for worse!)
An alternative may just be use small batteries like 18v Ryobi ones (or other brands, or better yet some DIY/Open Source Equivalent) and carry an extra set in your bag.
Thanks for the comment, Eric! The main problem with having the batteries near the foot is weight. It felt like having bricks strapped to my feat 😂 Also, I would want to make sure that the batteries can be quickly removed with one action in case they catch fire. It's unlikely, but you never know
Very impressed by your skills and ingenuity. A company used to produce gas powered rollerblades that I believe could hit over 30mph. I've hit over 40mph downhill skating many times (GPS confirmed)
What should I make next?
a motorball! blenderartists.org/uploads/default/original/3X/b/d/bdc0646e2fd9c75c44774073c9d4731ac25cd07d.jpg
Something fast for one leg person maybe ?
A helicopter hat, so a hat with propeller on to lift you in the air like a helicopter, hence a helicopter hat
Perfect it, like the air gear and sell it 🤑🤑🤑
Something like speedboard ie skateboard with two wheels and powered next time give us more instructions so we can also build them.
Real air gear!
We get a little closer every few years.
My first thought
Waiting to come true
Air Treks ❤
I think he just needs to set the skates speed based on impact and he's there!
airgear is slowly becoming a reality
Issa Mihotoke Checking in and ready to roll
Need it now
@@neplotuneinc6181 Check Atmos Gear a french company, they sell a better version than this video and it goes like 40km/h
I have always dreamed of making roller blades more dangerous.
I had that dream and implemented it! I took of the wheels and added sharp blades, instead of doing it on the road I would do it on frozen lakes and rivers. So any wrong move and you would cut an artery and bleed to death or go through the ice and die of hypothermia.
I wanna make these and zoom down a busy street filled with cars and try not to get hit. Like a Mr beast challenge. 3 of us do it, last one alive gets £50
These are super clean and refined! I had made two (heavy, janky, and impractical) electric skate prototypes a couple years back after being inspired by Motorball from Alita: Battle Angel. Super dope to see how you made yours!
Thanks, Aidan!
You could call them "Boosted blades"
Nah, electric blades are already named 'Air Trecks'
Air trecks
@@spiritofpostpunk7207 yeah, you know
@@spiritofpostpunk7207 nah air blades
Air gear
By far the most sensible and sane project on youtube. Well presented and executed.
I actually love the fanny pack tether, the cables look badass and you cannot beat how sleek and normal the skates look. This is the best thing I have seen someone make in a looong time! Thanks for the awesome video.
Thanks for the love, matt!
I really like how you show the entire design process it's a great tool to learn.
Glad you liked that! I like when the youtubers I watch show what didn't work too
so dope. I have been using my rollerblades as my daily driver lately, and eblades like these would definitely ease all the wheel wear down. there are 2 eblades on the market I know of at the moment, and I look forward to having even more options available by the time I can afford to buy them. seems like your design has equal speed and more range than the best current available option, big props!! subbed 👏👏😎👊
Thanks, WatchDog! The ability to break really does reduce the wheel wear down, especially on the sides.
@@collinbardini precisely! 😌👌
Congratulations, you accomplished all the goals on list and then some! 🏆 . Plus, they don’t look clunky, retaining a classic roller blade outline. Super cool!
It is coming. The age of Air Gears. Can't wait for the invention of the first Regalia. Who is going to be first to see the Wind Road? When I was younger and that anime first came out, I was like "No Way." Boy, I can see I was wrong the wrong wrong.
Thank you Iv been waiting to hear about this for years. Please bring this into reality I want it more then any other form of electric transportation.
Air Gear and JSR/JSRF is slowly creeping back into the online conscious and I love it.
Excellent work. Certainly one of the best versions I've seen made!!
Thanks! I’m glad you like them
Collin, I just want to say, I am so glad to be this early, absolutely sick build man 👍🏽👍🏽👍🏽👍🏽👍🏽🤌🏽🤌🏽🤌🏽🔥
I am an avid skater and engineer and can relate to this nice build. Seems to me having a battery pack in a fanny pack is better than increased weight at your feet.
Power transmission?
Wait! Maybe a line down each leg
Always wanted to build something like this, sick project man! :)
absolutly reminds me of the anime air gear, nicely done
Air Gear nostalgia, great work
They look a lot better and go twice as fast as a brand that I've seen available that makes electric skates (frame attachment). Well done! I'm really excited to see how this technology progresses over the years. I'd love it if by the time I'm too old to skate much if I could have some electric skates which weighed the same and also looked the same. Maybe if we get bearing size hub motors and solid state batteries we could have electric skates that are completely indistinguishable from non electric skates like we sort of have with bikes
I immediately thought of air treks from the anime air gear!
Super awesome build an design, and I'd freaking love to try them!! 😃
this is so cool! as a fan of rollerblading and electric rc stuff i've always wanted something like this
Ideas :
One. hill assist mode.
Two: make a device that can work on any skates.
Three: an off-road set up
Very cool. You could use load cells between the wheel frames and the boot so they would operate like a self balancing hoverboard or unicycle. Leaning forward would increase speed in an attempt to centralize your weight. However this would drastically mess up your normal skate stride and require your legs to be side by side. Perhaps a throttle that detects the side load during your normal skating stride would work. So side load on the right skate would throttle the left skate faster. Seems like it would amplify your natural stride.
Good idea, Dan! I did attempt using load cells to detect if the skates were on the ground, but my frame was too rigid to get any reading out of them. I think they are still possible, but it would require a redesign of the skate frames. My plan going forward is to read the motor current and speed to detect if the user is pushing and if there is no load on the wheels. Thanks for the comment!
16:17 HELL YEAH!!! Open Source For the Win!
*granted I don’t have the money for it now*, but i would GLADLY buy a kit/prebuilt once, so that may be a neat thing to do.
Granted Fun One Off Project -> Small to Mid Scale production may be hard, and also kill off the fun factor/be something you aren’t interested in.
Either way, i just thought I’d throw that out there in case anyone else thought similarly.
this video is super sick! i love channels that make videos like this and i was incredibly surprised to see this was your first considering the script, editing, visuals, etc. were all high quality. i think you could reach more people if you make it clear that you MADE the rollerblades in the thumbnail or title. i'm not sure how much you care about the numbers, but i'd love to see a channel like this grow. (if the video already has 8%+ click-through rate, then just ignore me lol)
either way, keep up the great quality and you'll grow regardless!
Thanks for the comment and the feedback! I may try something like "I MADE the Worlds FASTEST Electric Rollerblades" or "Building the Worlds FASTEST Electric Rollerblades" to improve click-through
I watched this video and I was thinking that looked like Davis, and then I saw the UC Davis sign when you rode past the basketball arena. Brings me back to my childhood when I lived there. Awesome video bro.
Hey, that's awesome and thanks! I always love visiting Davis
@@collinbardini Yep. It’s always a great time.
Woooooow. First of all this is great! Especially all your effort to making control unit and customisation of the motor. Second you are really hit the point of the “electric rollers” Great job.
Thanks for the comment, Dmitrii! Glad you liked the project!
Here for the rollerblades. Old die-hard Air Gear fan and just hoping that I can see them happen in my lifetime.
Now, anybody else got this strange feeling that Collin here kinda very looks like James Franco or is it just me? hahaha loved the video
i had an idea like this for the longest time, but I got so focussed on making hub motors for the wheels. excellent solution. great build!
Thanks! I got side tracked on hub motors for a while too. They have some major advantages, but for a DIY project are tricky
@@collinbardini i was considering making the plates for the motor core myself in a makerspace near me, but none of them have the capability to cut metal. then I thought about getting a local cnc shop to cut them for me but I couldn't justify the cost for multiple prototype runs. i love the chain solution, but I feel like its not as freeing as hub motors might be for something commercial. i also hate the noise, one of the things I like about blading is its quiet.
still, great vid!
Have just stumbled across your channel. Excellent 👌
Thanks and welcome!
I have an ebike, and it feels pretty dangerous going 20mph. I can't even imagine going 24 on a pair of rollerblades! Awesome build, but I can imagine why they haven't exactly taken off as a safe and easy mode of transportation!
this tbh
these rollerblades look terrifying to ride on
EUC going 55mph is truly nutty!
@@greenwave819 too slow, need faster
As an eboard builder and blade enthusiast please open source the build. Great work!
Thanks, Johnny!
So happy I'm not the only nutty engineer! I worked on some clamp-on skates, managed to go a few miles along the Charles River in Boston. Electric was always the goal, to try to get the most fun in the most portable size possible. I still have a design CADed up but the price was..... Prohibitive lol. You are a badass!!
Real life air gear!
my hero!
Great work dude!
Thank you! Cheers!
Extreme Electric Roller Derby! That would be bad ass. Why not. Everything else is going electric.
when I first entered the world of electric scooters I didnt know anything about the different types of motors and the balancing of wattage and voltage after building a couple scooters out of parts I had Im more seasoned you can say it still amazes me the options had a gas scooter who's motor was completely ruined stripped it down to the frame got the specific dimensions needed to weld on a plate for the 1000 watt magnet motor I had screwed in a heavy duty tote to rack on the back where I ran the controller and battery geared up the motor sprocket and voila 36v 1000 watt 20 amph it was fun can't wait to do another
Amazing video 📹 and amazing work 👏
I love this video, its just a guy making who wanted to make something cool and was able to make it happen, so inspiring!
Thanks for the love!
Awesome BUILD, Awesome VIDEO !!! 👍🏻👍🏻👍🏻😎
Thank you! Cheers!
First video ive seen of yours and im surprized you done have more subs.
Totally cool design...would be interested in the files.
My thought in regards to one rollerblade taking off when lifted would be possibly having a ground disconnect/microswitch under your heel which cuts power to the blade when raised... also id use a single dual motor controller... the advantage to 1bms vs 2 is you can have higher voltage and amp as well as weight savings...
I found your channel. Man, you're at such a low sub count. If you keep cranking badass projects out like this you'll be growing exponentially.
That's the plan!
@@collinbardini th-cam.com/video/2U9YRVX7OXo/w-d-xo.html
Looks like these European folks are trying to capitalize off a similar design lol
This is awesome can't wait to see where this channel goes. Keep coming with awesome videos bro.
Thanks, Thomas!
What a great video! Would love to see you make more stuff
Incredible work Collin! Here I am trying to do the opposite, I'm trying to slow down my 110mm wheel blades because I can't slow down effectively LOL. I created a hand brake with a cable pulled brake caliper for my right blade that clamps on the two rear wheels. Your design is so elegant.
Thanks for sharing, Daniel! That's a cool solution!
Why not hockey stop?
@@marktechsci because I'm not that skilled , I don't want to destroy my wheels, and because the brake will be a full stop while standing.
Ah yes, my memories of Air Gear are coming back... I like this.
A thought, adding those spring loaded retractable spoolers to take up any slack in the power cable? It would help getting your cables safe while at any height (crouched to standing). This might add extra strain on the connectors on the boot.
Also, polyurethane on a leaf spring to take up any slack in the chain might reduce the noise of chain meshing loosely with teeth.
Love the idea! I have just been rolling up the slack in the fanny pack for now
Dang for a first video this is amazing I was expecting you to have over 100k subs
Thanks, Loomy!
Too lazy to look in the comments.... but AIR GEAR. Thanks for making my dreams come true!
Man it is amazing for the first video
This setup comes across as very cyberpunk. I suggest using that in your future marketing.😎
I love that style so I would definitely want to lean into that. Thanks for the comment!
Superbe vidéo hâte de voir les futurs projets et comment la chaine va évoluer
Merci!
If you're not planning on selling them, as in abandoning this project.
Please make them opensource/openhardware.
It will be interesting to see if others can build upon your platform to create an even more refined version!
Awesome, next level of freedom :)
Tech & slight irony = great combination
Glad you liked it, Lieven!
Air Gear irl this is awesome!
Jet set radio coming to life
Very cool! I ordered the Atmos Gear skates, but I suspect I'll be modding them 😈
Those look pretty cool! It makes me happy to see there are companies entering the space. One day I would like to do a comparison video on those
Very cool! Have you tried looking into power tool, li-ion batteries considering how light weight they are? They also have a nice convenient holding slot you're probably able to utilize in using to attach them to each skate perhaps. And also by utilizing the slot of the batteries, you're then able to switch them out when the batteries die out on you on long trips. You'd probably want to try adding solar panels to charge the batteries as you go on top of your helmet as well, that way on sunny days you'll not need to carry with you extra batteries.
Using tool batteries is certainly possible!
Add a fail safe.
Radio interference can send you flying and hurting you or kill you.
Very simple and nicely done 👍🏼
Elbows and Knee protection recommended as well.
Millions have learn this the hard way having to live the rest of their lives in pain.
Thanks for the comment! A fail safe on the remotes/controller was one of the first things I added because you are 100% correct that you can end up in some very bad situations. One of the precautions that I have been taking is never going faster than what I can handle on normal skates. I usually brake a lot going down hill for example. Elbow and knee protection are definitely recommended and I will be purchasing some soon.
I'd love to have a pair of those. I've been looking for a powered skates solution for years...
Awesome video and project! Looking forward to seeing more projects in your channel!
Thanks, John!
Dreamt of this so much as a kid!
Same! I'm glad that technology has progressed to the point where they are possible
That is a really cool project. Love it.
Thank you! Cheers!
I gotta come over and see these in action lol
Great project.
Thanks, Fathy!
I'm looking forward to the next generation of electric skates;
mainly the ones from AirTrick, Escend, and Atmos Gear.
Same!
I’m looked I try to ask them to become a sponsored rider, and now I see many positive things in china. Also I’m on design of stick with wheel to ride on normal blades@@EricGonzalo
is the wear on friction drive that big of a drawback? I've always liked the idea since it lets you use the skates normally as well when you run out of battery, the guy that designed the thunderblade used the centrifugal force of the spinning motor to push it against the wheel, I thought that was pretty clever.
also wanted to say, amazing build! and amazing editing and production value :) surprised to see it's your only video on this channel with this quality
Thanks! I put a lot of work into the video so I’m glad it paid off! I don’t explain it in the video, but I was also concerned about how traction between the motor and wheel could be maintained. I was thinking a spring mechanism, but the centrifugal wheel is really clever! Friction drives are certainly viable. However, I think chains/belts win for me personally.
hey collin it’s patrick from mr. angi’s class, these are sick
Woah I haven’t heard that name in a long time! Learned a lot in that class. Hope you are doing well!
In RC car those jerking motion on low speed brushless motor called cogging, that's why we have a sensored brushless motor to fight this cogging issue.
I never knew that! Thanks for the info
these are the real e skates well done young man. ill sub )
Thanks!
This video is great, pretty impressive! I like how you explain everything really well and excited to see the things you build as your channel progresses. I always thought it would be cool if someone were to build some type of basic "any user" friendly electric platform that could be applied on more than one application. For example, lets say one day you want to ride and electric skateboard/longboard, next you wanted to ride and electric scooter or maybe mount to a bicycle for a little power assistance. Some how have a system could easily switch to these types of applications with only minimal mods needing to be done. I think it would be cool to see the different things users would come up with.
Subscribed, Look forward to seeing more of these videos! Keep up the good work dude!
Thanks for the comment! Cool idea too!
Very nice 👍
Of note, very thin v belts are available to use instead of a chain. If you get the tension right you shouldn't need a toothed belt for that HP level.
That's an interesting idea. I might check out v belts in the future
24 mph is really close to 40 kmh, our speed limits in the city is 50 kmh about 31 mph - that is some next level speeds on a pair of blades
They could be very practical if they can clip into regular shoes quickly. Slip on the blades and ride around city/campus/work, clip them off and put them in your backpack, where the battery was also located
I actually have a pair of Doop skates that I could attach the electric frames to! That would allow me to clip in and out with regular shoes.
@@collinbardini very interesting, i didn't know about these
Awesome skates. I would like to see regenerative braking and possibly a different drive other than the chain to make the ride quieter.
Thanks! Check out the follow-up video! I switched to a belt drive, which was much quieter
i was holding on to a car with rollerblades on and going 25 on rollerblades is actually scary af lol
Here before 1k subs. This is awesome man.
Thanks, Meng!
This was epic! I would like to see a more powerful motor and a back pack battery. I wanna see highway speeds
you can use sensored bldc motors t o detect the rotor position, and the editting is pretty good for a first video uploaded on the channel
Thanks for the comment! You can use sesnored motors, but unfortunately mine did not come sensored and I did not find anything comparable that were. I am seeing if I can get them custom made, however!
Excellent video and quality for your first Channel video
Thanks, Greg!
Awesome, and inspiring!
Glad you enjoyed it, Austin!
Those are awesome 👌 mass produce
cool content man greets from Frankfurt Germany
Super impressive ! Hello from Petaluma.
Thanks, neighbor!
Granted it would mess with ground clearance maybe, but making something like “conformal fuel tanks” but for batteries around the foot section may work.
This would also lower your center of gravity (for better or for worse!)
An alternative may just be use small batteries like 18v Ryobi ones (or other brands, or better yet some DIY/Open Source Equivalent) and carry an extra set in your bag.
Thanks for the comment, Eric! The main problem with having the batteries near the foot is weight. It felt like having bricks strapped to my feat 😂 Also, I would want to make sure that the batteries can be quickly removed with one action in case they catch fire. It's unlikely, but you never know
@@collinbardini although then you can go all Wile-E-Coyote /s lol. Makes sense
This is the future 🚀
make them again, but beat Escend Blades in every aspect possible!
(you already beat em in performance and range, so you arent that far from doing it)
Very impressed by your skills and ingenuity. A company used to produce gas powered rollerblades that I believe could hit over 30mph. I've hit over 40mph downhill skating many times (GPS confirmed)
Thanks and 40mph blows my mind!
Underrated
Epic design 10/10
If you do make a cordless version maybe look into belts again, the chains are quite noisy.
Why not gears?
@@roiq5263 Good point
They can be custom made and should be significantly quieter
Really cool project but all I wanted to see was the CAD/CNC process. Next time shoot way more of that stuff
Like the Anime Air Gear ❤
Excellent platform flying eagles are.
Good solid choice for this project.
They are actually SEBA FR1 Deluxes, but I would love to try some flying eagles!
Dude built a IRL (Air Gear)... Awesome :)
oh those are awesome!
Thanks!
Great project! I have an idea for a rc (or ideally autonomous) 'luggage car' that follows you at a set distance while rollerblading.
I say you patent this unique product and call them Gliders, but make a battery backpack with shoe storage and you got a gem on your hands your welcome