Hey do you have good mileages from your Bigfoot? I have a Zenoah G290rc motor on mine. I’m running the stock 1Liter tank & it only last me about 18miles. Now I put in 91octane gas mix with the Walmart 2-cycle blue color oil. I uses Zenoah’s mixing instructions and it notes, 25-40:1. How I read it, to my understanding that would be 25 to 40oz of oils per every 1galllon. Or am I doing it wrong? How do you mix your fuel and what oil brand do you uses? Can you help me out? At the same time I also think the way I set up the spindle for rear tire may be either spinning too much which wastes gas or too hard on tire.
The pull start itself could be dirty and may need to be taken apart and cleaned. On a Bigfoot, if the spindle is too tight against the tire, it could also cause that issue.
Hey do you have good mileages from your Bigfoot?
I have a Zenoah G290rc motor on mine. I’m running the stock 1Liter tank & it only last me about 18miles. Now I put in 91octane gas mix with the Walmart 2-cycle blue color oil. I uses Zenoah’s mixing instructions and it notes, 25-40:1.
How I read it, to my understanding that would be 25 to 40oz of oils per every 1galllon. Or am I doing it wrong? How do you mix your fuel and what oil brand do you uses? Can you help me out?
At the same time I also think the way I set up the spindle for rear tire may be either spinning too much which wastes gas or too hard on tire.
Hey Mike I have a problem with my goped maybe you can help me when I try to starte is ward tu pulled tanks
The pull start itself could be dirty and may need to be taken apart and cleaned. On a Bigfoot, if the spindle is too tight against the tire, it could also cause that issue.