1980 Suzuki GS 550 Ignition Issues fixed

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ม.ค. 2025

ความคิดเห็น • 12

  • @thedirtroadmystic
    @thedirtroadmystic 4 หลายเดือนก่อน

    Just bought a 76, 550 super sport and a 79 Suzuki exactly like the one you have with the exact same problem. Thank you sir.

  • @Marbleheadjed
    @Marbleheadjed ปีที่แล้ว +1

    My 77 gs550 was running great for 1200 miles after a new rotor , stator , rectifier regulator . It started to lose power. Then it would barely run and die immediately with the headlight on . Stator tested ok rectifier bad . New rectifier and still barely runs . I switched to dynatek ignition a few years ago and am thinking of reinstalling the points . I’m wondering if when the rectifier died it damaged the dynatek ignition? Very frustrating .
    Nice video

  • @matteo4765
    @matteo4765 6 หลายเดือนก่อน

    Hey where did you buy the black airfilters?

  • @maximilianoparcio8782
    @maximilianoparcio8782 7 หลายเดือนก่อน

    Hello man! I have the same problem on my gs550 and have to change my coils. Can you tell me (if you remember) which coils I should use? I would greatly appreciate it 🫡

  • @oleksandrartiushenko6852
    @oleksandrartiushenko6852 ปีที่แล้ว +1

    Do you use original igniter box, or did you find work around ?

    • @pwillysbarn5574
      @pwillysbarn5574  ปีที่แล้ว

      It was not original. Previous owner had upgraded or replaced before me.

    • @marcocarrion-k8o
      @marcocarrion-k8o หลายเดือนก่อน

      @@pwillysbarn5574 @oleksandrartiushenko6852 I think he was asking about electronic ignition. I too am running the infamous "box" and losing spark above 2-3k rpm. I'm guessing you are the previous or older generation of gs and have a mechanical advance as well. Hope she's still running good. 👍

  • @masonerickson287
    @masonerickson287 ปีที่แล้ว +1

    Just bought a 81 gs450 and can’t get it to crank. Anything you suggest?

    • @pwillysbarn5574
      @pwillysbarn5574  ปีที่แล้ว

      Check fuses.... not that they are not blown, but that they are making connection on BOTH sides! I had good fuses but they were not making contact on out put side to the connector... its usually something very simple but can be hard to find.

  • @luisbatista597
    @luisbatista597 ปีที่แล้ว

    💪💯😎🏆

  • @eoincostello4634
    @eoincostello4634 ปีที่แล้ว +1

    Take the pods off man

    • @idecidenotyou
      @idecidenotyou 8 หลายเดือนก่อน

      What are pods