I do have a question: what would be more accurate, the 621 (327mm inner barrel) or the 623 (400mm inner barrel) at stock speeds (400 FPS)? What if I want to downgrade to 300 FPS?
@@danielwang5467 Thank you for the compliment! If people have taken the time to comment or ask a question then its important to me to come back to them and give them an answer if I can! As with the barrels, if you are running them at stock speeds and then potentially going to lower the FPS, the longer one would generally be expected to give the bb a more stable flight meaning there is less likely to be spread at the end of the flight of the bb. But this can depend on how clean the barrel is and the conditions on the day. In all honesty you probably wouldn't notice any real difference between them. Hope that helps! Pheas
@Mjhops760 Not yet the pinion gear came off of the motor and is stuck inside the gun keeping it from firing. I'm going to get the rear out and get a new motor then I will take it to the field.
@@PheasAirsoft As I wait on this gun to arrive I'm already wondering about a decent pistol/handgun as a secondary. Do you have any recommendations on that front, please?
@@Mr1drew Hiya. Gbb pistols are great and a lot of fun, my wife runs an army R32 with c02 mags and loves it, and the jw3 tti pistol is a nice piece, my son runs the kjw MK1 non blow back and although a little inaccurate it's a great little piece and super cheap. However for me gas blow backs are not always great in British weather and I'm a massive fan of electric pistols. The cyma ones now with the MOSFET in are better than ever and such good value, no you don't get the recoil but you get all year round consistency and option of full auto if things go sideways. There are sooo many options out that right now, it's hard to pick a bad one really I suppose. I will say that it's a rare occasion my pistol is ever drawn and if I do use it it's usually because I've taken it as a primary and left my rifle in the safe zone. Hope that helps! Pheas
@@PheasAirsoft That does help, thanks! Being based in Ireland myself my airsoft friends say gas isn't great in cold climates so it's perhaps more of a summer gun than a winter one. Maybe I'll "hold fire" on buying that (pun intended). Thanks again!
Helped a lot as you know I was in a little bit of a unsure state earlier with lots of people telling me different things.now I know what I’m going to get no doubt about it
fantastic review, please do more of these cyma guns there are a lot of people out here (including me!) who want to know what's worth it as a first gun, range of price to performance etc, all that goodness, got a sub out of me regardless though keep them coming champ! edit: thank you for the heart man all love to you and your family from your new irish fan in these hard times!
I have to say I am perkeleen (finnish swear word almost same meaning as "bloody fucking" in this case) impressed with this cyma and for such a cheap price this is a damn impressive product from cyma. Just goes to show that cyma has really pumped up their game with their new products. Awesome video too keep up the good work.
Amazing vid, I saw the wep on Taiwan and wanted to buy but there were no videos of it, and I check ur videos and there it is, just posted, a great review of it. Can't wait for you to open it up! Great vid!!
I got the 622, which is the same gun and same price, just has full mlock and the front sight is build in the rail (so if not in use as sight it can be used to mount something like a laser). This with a 11.1 lipo is a beast for the price. I doubt you get a better starter gun as said in the video. Btw, I have the same problem with that little lid in the stock, always need to use something like a screwdriver or allen key.
Glad you liked it as much as I did. The stock is just about the only bad design choice on it for me. Other than that outstanding value for getting into Airsoft.
@@mereimages1844 Hiya, this is owned by my friend and the cm506 is owned by my son, between them so far they have each had over 10,000 rounds them and they are still going strong. They have been through a few different weather conditions and the cm.506 (my son is really clumsy) has been through mod twice and still kicking ass with it. Hope that helps. Pheas
Has been pretty sollid so far, only thing that happen twice is having to adjust the motor hight with the bottom screw. This came a bit lose. But you instantly notice by the sound, simply adjust screw and good to go. This could be due to the 11.1 lipo
Interesting enough, I remember buying the Cybergun M4A1 Keymod and it's the exact same one as the CYMA. Not sure what's the difference, but it's still a good starter rifle for both CYMA and Cybergun.
@@colig-sh5rn yes its a great starter gun but make sure to get 9.6 v battery and a charger too its a very clean realistic and has a really great performance on the field to so yes you should get it if your new to airsoft
Hey, I just bought one of these and having the same issue where I don’t know how to get to the battery compartment.. when will you be doing the disassembly video? Thanks
They are excellent for the money... although my new hottness in this price range is the Double Eagle M904 series... so much more on offer for pretty much the same price!!! Pheas
I like this one, however im debating if I should buy this one airsoft rifle or the cyma sport tactical ak47 aeg with the folding stock, so can someone give me their opinion on both guns and which one i should buy, cause I want one but im debating on which one I should get
Hiya, You can use an 11.1v out of the box, how long it will last is anyones guess. My friend has a CM.506 which he runs on an 11.1v its completely stock and is still running, but others haven't had as much luck. I would say if you want to run the 11.1 it might be worth the upgrade of gearset, but it will run for a while as it! Pheas
@@nikistarwars Unfortunatley I don't have this anymore, however I do regularly get tech work to do, so when something similar (or this one) comes across my tech bench for some work doing, I will of course make a video from it. Pheas
Hello, the price may have changed since this video released (worlds gone a bit crazy) but generally the price includes the charger and battery, but check the retailer first as some dont include them for some reason. Pheas
Hey so I bought this gun a month ago, but the battery and charger wasn’t included so I bought a 9.6v Battery & Charger. The battery won’t charger though, I read reviews and someone said “coupling doesn’t match” is there anyway to fix this?
Hiya. When you put the connectors of the charger and the battery together, do the colours of the wires match? So you should be able to put red to red and black to black, if not then one of them is wired the wrong way around and will need to have a new connector on it. I would look at the battery connecting to the gun, do the colours of the wires match there? If you can figure out which one is wrong then it shouldn't be too hard to change the connector over to match (but you will need to buy a new connector) Pheas
@@PheasAirsoft hey so the battery was perfect but the problem was my air nozzle wasn’t moving so I have to get a new tappet and a new nozzle, I think this is the same problem everybody else is having, I’ll update when I get the part and try and fix my gun
Hi i have just purchased the CYMA CM 650a which has MOSFET fitted, ( i assume the same one) do you know if this MOSFET protects the LiPo batteries discharge if so how, is it an alarm or does it just stop working. Many thanks
Hiya, I honestly couldn't say. I haven't found any form of instruction book for it or information about it online. I should have thought of this.. next time I have a CYMA with the mosfet I will see if I can run the battery to flat and see if any protection kicks in. Sorry I can't be any more help! Pheas
Any chance to test and chrono a working CM.032 M14 variant? I know that the one you previously filmed had was faulty. Bad luck, I own one in olive green, 100% working, and with side rail attached and scope 3-9x40EG weight a ton (4.5 kg), more than original weapon was. But that gives me a happy sweat and makes me a fitness hero when using it. Although is in the range of 360's, which is a bit weak for DMR style gun in Europe, it lift great .28 BB's. The only downside is ver.7 gearbox, which looks a living nightmare to work to... I have spotted an issue though, if you press very briefly and incomplete the trigger, is going to arm the piston, but it will release it only with the next pull. Every single trigger pull have to be complete and steady, otherwise you likely run into mechanical issues. Also when battery deplete, gearbox makes a noise like it breaks down, but switching batteries the scary sound disappear.
Hiya. I dont have it any more, and the issue with it was an abundance of grease in the top of the motor, cleared it out and it was great again. If I get hold of another, I usually end up buying the same guns over and over then I will make sure to do a video. WIth the trigger that is inherent in them all, only way to solve that easily is like you said, a full trigger pull. After that it maybe get a mosfet fitted. Hope that helps. Pheas
Hiya! I have a new fav budget one now lol. It's the Double Eagle M904 series with the falcon control system. They are slightly more expensive than this cyma (£100ish for the gun) they have as good externals, the mosfet is significantly better and more reliable than the one cyma is currently using as well. The videos I've been releasing, including today's, use a pretty much standard m904 for a DMR and they are outstanding for the money. Don't get me wrong these cm.621 are still good, but not as good as the 904 for only a bit more money. Pheas
Is the CM620 pretty much the same gun with different hand guard set up? I'm having trouble finding any information about these. Like how long they have been released or even basic specs. I've seen CM620 621 622 and 623 online they all look very similar but just wondering how similar the builds are. Thank you
Hello! They are (internally) identical. There maybe some barrel length differences but that's it, so anything I've covered in the unboxing and disassembly should stand for the 620. Pheas
Got this gun and am super chuffed, it's fantastic. I also ordered a 7.4 Lipo and a smart charger. However, I've heard that Lipos can sometimes burn up or even explode in the gun if too low on charge?
Good choice in starter!! Massive compliment for me that I have influenced what someone has bought! As for Lipos, they are completely safe provided you treat them as they need to be treated. First of all don't poke them with sharp edges (such as blades or screw driver tips) not that anyone would but just to be safe. Next you are more likely to damage the cells so they cant be recharged by over discharging them (by shooting your gun) than you are to make them actually explode. For this you have a couple of options, depending on your Mah capacity and how trigger happy you are you will get a good idea of how long a battery should / will last. So my 2200 mah 7.4v I know will handle my heavy trigger finger all day and have mah to spare by the bucket load. However a 1200mah which I put in the wifes cm.077C i know will last roughly half a day so to be safe I switch it at lunch time to make sure its not over drained. To add to this if you are playing and suddenly your rate of fire gets slow and is steadily slowing down. STOP SHOOTING!! change and charge the battery. ALSO DONT LEAVE THEM PLUGGED INTO THE GUN, always disconnect and remove them after a days play, especially if you have a mosfet as it will slowly drain down the battery and potentially leave it dead forever! You could instead get yourself a lipo alarm which is a little alarm that plugs into the white balance connector. This will warn you if the battery is getting dangerously low charge in it and indicates to change the battery, it may also beep whilst using it, even through the mah is high enough, as the gearbox / motor may be drawing too much and the alarm will warn you of this usually with a single beep whilst firing. I actually have a couple of spare alarms, so if you drop me an email I will send you one for free!! How nice am I! Hope that helps and is useful! Pheas
That's very kind of you thank you Pheas! I actually took inspiration from you on the battery front too and got an iPower 22000mAh 7.4v 20c battery from TaiwanGun, as well as a smart charger with the green light to indicate fully charged, etc. I mean, I certainly wouldn't say no to a spare alarm if you're sure... lol
@@Mr1drew drop me an email to pheasairsoftyt@gmail.com and I will sort you one out! Let me know how you get on with the 621 once you have played with it! Pheas
Hey man, I picked one of these up and plugged the battery that came with it in to hear no MOSFET sound, I'm pretty new to Airsoft so I'm not sure if this is a battery issue or a problem with the internals. Any advice would be appreciated 👍
Hiya, the 515 is the same externals but not the same internals. This model has the mosfet in it and the tight bore, the 515 has the standard gearbox and barrel.
@@LLLexen it's all good. Both are excellent out of the box and you wouldn't be disappointed with either, but if you had the extra little bit of cash for the upgrade then the 621 just pips it over the 515 because it has those upgrades internals that most people would do anyway eventually. Pheas
Hiya. I would not recommend unless you are going to replace the mosfet with a better one. I have just replaced the normal mosfet as the owner was using a 9.6v nihm I believe and even that has fried it. So I would stick to 7.4 lipo or 8.4v nihm. Hope that helps! Pheas
Hiya, thanks for the comment. As far as I can tell, for the next 11 months nothing had changed and stuff will still come and go as it has done. After the end of this year is when new trade deals will come into effect. So for now you are all good to order! Hope that helps! Pheas
hey i just bought this gun but i’m having trouble fitting the battery in the stock. it’s an 8.4v butterfly battery but the stock isn’t big enough to fit them. am i doing something wrong or do i just need smaller batteries ?
Hiya, are you trying to fit the included battery in the stock, or have you bought another one? If it is the included one here is a guide that should help: th-cam.com/video/eO9HcDz6LvE/w-d-xo.html If its an aftermarket one, is the battery too long? or just too wide? Pheas
@@bengosa6335 it can be stiff and a pain to pull out. When you take the back plate off (the bit with the rubber pad on it) there is a hook type thing at the top, I use that to help me pry it out at times. Does that help? Pheas
Hiya. It should boot up as normal with any charged battery. It may be that they have sent you the wrong (earlier model) or possibly the chip doesn't make the sound. Hope you get to the bottom of it. Pheas
Hiya. If the 100 gave you 390 then you have good airseals and the m90 should get you to where you want it. Might even have to go to an m85. Good luck with it! Pheas
Hello! It should be ok I would have thought to run the 30k motor! The same internals can be found the cm.506 and my son's runs a high speed motor and MOSFET and still no issues! Pheas
Hi, great review! Do you know what the difference is between the cm.621 and the cm.623? I think its only the barrel lenght, but the 623 has a longer barrel and it is also cheaper so maybe theres a difference in internals..
Hiya. I got this one originally (pre-brexit) from taiwangun.com, in country, the £150 mark is about the normal now. I would however like to offer an alternative to this... The Double Eagle M904 series, similar price, but sooo much better. The ETU (Mosfet) has programmable features and it is generally better built than this cm.621 with very little difference in price. You can get either from Taiwangun, but likely that you would get hit for customs fees which will lift the price. Hope that helps. Pheas
Since I'm gonna be new to airsoft.. just wondering if Taiwan gun do two tone versions or if I will have to pay for one over here for it to be two toned
Hiya, thanks for the question. Historically they haven't done a two toning service, it's just as they come only. But it I haven't had to ask in a long time so things may have changed. It is worth a quick Facebook message or email to them to see what they say! Pheas
Hi so I just was asking about the little spring that goes on the bolt cover and connects to the hopper mine got lost and I wanted to know if you knew what that spring was call so I can get it
Hiya, thanks for the question. That's a very hard one to answer in all honesty. If you have the money then the metal externals are a bit nicer looking to me and will last you longer so if you have the money (and prefer the look) then go for the platinum. If you don't have the money then this model is a better spend. Internally they are pretty much identical so will mostly depend on your budget and preference for looks. Hope that helps! Pheas
hey! it's been more than a year since that review, have you ever used it? do you still have it? I just wanna know about its longevity. thanks for the review!
Hello! I don't have it any more, I sold it on not long after, however... I do hear from alot of people that have been running them longer term. Generally they are still running well and nice, some of the older ones (earliest versions) seem to have got bad MOSFETs that fried after too high battery or just for no apparent reason. I had one recently that I removed their MOSFET and wired in a gate merf and the owner was sooo much happier for it! But they generally seem to be doing really well even after 12 months! Hope that helps! Pheas
Hiya. Yep, it's fully upgradable. It's a standard Airsoft m4 so compatible with any and all parts really such as other mosfets, gear sets, barrels etc. Pheas
Hello! The dbell stuff is very good and surprisingly cheap. Some areas of the internals are not quite up to the Cyma stuff. But the price for them is just too good to pass up! Good choice! Pheas
Hi mate love your vids. I've just bought this same gun and my semi auto isn't working, it just shoot full auto. Also when I plug in my battery I don't hear the sound of the mosfet. I've tried the battery that it comes with and an 11.1 lipo and still the same results. Any idea what the issue could be? I'm quite new to airsoft so pretty clueless
So it shoots in full auto even when set to semi? Sounds like the cut off level isn't connecting properly or the selector isn't working properly. As for the mosfet, if there is no sound then I would suspect that it may not have one in it. Did you buy it brand new? Pheas
@@PheasAirsoft thanks for the reply. www.bespokeairsoft.co.uk/cyma-m4-keymod-nylon-fibre-mosfet-qd-spring-inc-bat-charger-cm621 this is the gun I ordered but in two tone. Yes its brand new just got it on Saturday, I ordered it after watching your review. Think I'm going to have to try send it back as its fault and I've not got the experience behind me to go fixing it myself. Thanks again for the reply keep up the good work
@@PheasAirsoft recap, managed to fix it after many tutorials haha, my selector wasn't working properly like u said. It definitely has a mosfit in it but doesn't make a sound when I plug it in. My brother just got the g&g raider 2.0 le and his mosfit also doesn't make a sound when he plugs in his battery but he can still switch his to 3 round burst etc, any ideas why this might be?
@@davidyeats9578 if they are working as they should then that's great news! As with the mosfet the g&g one is programmable where as the cyma one isn't, it's just something to increase the performance (how quick it responds to trigger pull and how quick it can complete a shot) of your aeg by getting the power more directly to the motor. They Aren't all programmable for burst mode etc. The cyma ones I thought all made a sound when they booted up but I'm guessing they may have removed that feature on some lines. MOSFETs don't always make a sound at boot up, some of them are silent start and some vibrate the motor to indicate it has booted up. Good luck with it in future, glad you got it running! Pheas
Hiya. If you are buying in the US then it will generally come with the orange tip (Law dictates it needs to have it, or so I am lead to believe) Outside of the US generally it comes with the black one as other countries dont require the orange tip. Hope that helps! Pheas
anyone know where i can find the 11.1 lipo at? im building myself a new kit so i can swap through my guns and have something friends can use when they come over but i dont want it to be stock (slow).
I have a question, do most Cyma m4’s have a functioning forward assist and dust cover? I’m new to airsoft and am trying to find a quality gun. Mainly the Cyma jungle m4 carbine because it is cheaper quality so I’m not sure if everything works on it. I’ve had psat experience with duds.
Hello! It is very hit and miss. Some yes some no, Even within a brand some models will have it other will not.... Doesnt even link to price either as I have seen some higher end models not have it, which is crazy for how much some of them cost. Pheas
In the first year or two that they were around I would defo say there were the odd lemon from them but now they make exceptional stuff. I've not had a bad one in years. Obviously the budget end are not as well engineered as the top range cymas but even at the bottom end they are still excellent quality. Pheas
I'm gonna buy it in 3 months then put the novristch ssg 10 sniper spring in there it's not gonna be 220 it's gonna be 140 I just play backyard airsoft with my friends and I only want about 475 fps and also battery upgrade which should be easy and since it's full metal I'm not gonna be afraid to be rough with it my birthday coming up on Christmas and I get 50 dollars a month so I'm gonna start saving up
Hiya. I've had a couple of suggestions for the lancer tac stuff. I'll bump it up my priority list and get one sorted after the current orders have come in and been sold off. Pheas
Hiya, sorry to hear your gun broke, but this is well worth the investment if you do get the money together to get a new one. Is there not a tech local to you that could repair yours? Pheas
Hiya, That is a good question! I have bought loads from Fire-Support they are really good, Patrol base are good too, I recently discovered Urban Airsoft Uk and they are amazing! Loads of stuff in stock and their store is ace, well worth a visit if you are near by. Airsoft world is somewhere i regularly pick up bits from too and Eagle 6 are pretty good for marui parts and guns. Hope that helps! Pheas
Hello! Yes they are. I can't remember the size needed (might even be in the box) but you loosen the bolts and the rail will slide backwards and lift out. Pheas
Hiya. I believe it is the 10" one. If it was me I would get the 10" as I can't find a reason for the extra space on the rail and I prefer the looks of the shorter one with the outer barrel exposed. But its down to your preference on the looks. You pick the one that makes you say "DAMN THAT LOOKS GOOD!" Good luck picking one! Pheas
Hiya. All of these were from before Brexit, so were all "free" imports. I have a tester order currently in brexit limbo with UPS and not idea what will happen. Alot of people are saying their parcels are being returned to Taiwangun.. some saying theirs have come through with no customs. Its a hot mess right now. Pheas
Hey, I’ve bought this gun since seeing this amazing review!!! However I’m having trouble with my kublai mid cap polymer magazines :( (not feeding at all) can you recommend some mid cap magazines that will work with this rifle???
Hiya. thank you for the massive compliment that I encouraged you to get this!! With the midcaps, if you put BBs into the mag, if you press the release on top to let the bbs out, do they all fly out with force, or do that trickle out, or just sit in the mag, as the feeding issues could be that they haven't bedded in yet. If the BBs just fly out of the top, then there is a fit issue, you could try moving the mag forwards in the mag well (or backward if it helps) to try and connect with the hop better and see if that helps. Some people fine they need to put a bit of tape or velcro on mags or the magwell to make their mags fit and feed. If you just want to go for new mags anyways then I would suggest just the CYMA ones as they will fit and feed in it happily. I am sure other brand will do as well! Let me know how you get on ! Pheas
Cheers for the reply man! Turns out you were right it’s a feeding issue so magazine needs to be pushed forward so I guess I’ll stick a little tape in the magazine we’ll, anyhow what mags have you guys been using with this gun?
Hiya! The gearbox will degrade quicker due to the 11.1v but its more the mosfet that wont deal with it. Alot of reports of the mosfet burning out on an 11.1 (or the microswitch on the trigger just breaking in general) so I would advise a 7.4v lipo with a high speed motor if you want the high rate of fire. Hope that helps. Pheas
@@marquisnoeggerath950 Hiya again. not to the MOSFET it don't. They will adjust the gearset for the smoothest (in theory) operation, but the MOSFET wouldn't be messed with at all. Pheas
Hello, it can be batch and retailer dependant. If the website says no battery then I wouldn't expect one to come, I believe of late they have not come with them as nihms seems to be causing issues with the mosfet for some people. Pheas.
HIya, you can add a keymod rail to the bottom and mount a ris mounted m203, but if you wanted a barrel mounted one you will need to replace the handguard with one thats open on the bottom. Pheas
It did look like their new style high speed motor, but I wasn't quite as convinced about its performance compared to the one in the 97 and 98 platinum series. Pheas
Hiya. I would look to get a 7.4v lipo for this. There seems to be a rising number of people that have said that they have run 11.1v and it has burnt out the mosfet. I have replaced a couple of them myself with standard trigger blocks and after market mosfets. So look for a lipo that is split into two halves like this: www.componentshop.co.uk/7-4v-2200mah-20c-continuous-discharge-airsoft-split-pack-lipo-battery.html Something like that will power it ALL day long and sit nicely in the stock! Hope that helps and sorry for the delay in replying. Pheas
It can be a little bit fiddly. Just to check, what type of battery are you putting in there and to you mean close the battery cover or collapse the stock (moving it in and out). If you let me know I will do a quick requested video for you today and post it. Pheas
@@benny3828 Hi in about 30 mins the video will be live on my channel on how to put it in including a little mod to make it quicker and easier for you too. I am just rendering it and uploading it. Pheas
I was not. Unfortunately in the 3 years since this video released ALOT happened with airsoft prices. Part of the reason I no longer comment on the prices if I can avoid it as you can no longer be sure what will happen. Pheas
Hiya, out of the box probably not, I don't think the gearset would hold out long term. You could drop in a high speed motor instead and get very close to the performance. Pheas
Hiya, thanks for the compliment and question. Here is the link to where I got it from: www.taiwangun.com/en/electric/cm-621-mosfet-edition-black-cyma?from=listing&campaign-id=14&q=Cm.621 Hope that helps! Pheas
hiya, if it's the same model as this with the same model number then it should have the mosfet, but I would contact them directly and check before you order to be certain. Pheas
Hiya. Mine did back when I got it, however people are saying that it's hit and miss in newer ones for the battery and charger to be in there. Some have them and some have none. Pheas
![[HOW TO] CYMA CM.515 Disassembly - Internals Review](http://i.ytimg.com/vi/KJ7l1RW0mDw/mqdefault.jpg)
![[HOW TO] CYMA CM.515 Disassembly - Internals Review](/img/tr.png)
This man deserves millions of subs
As usual pheas great video very informative pure quality as always
Hello, just want to say that you seem like a wonderful person, answering all these questions long after the video. Cheers from the US.
I do have a question: what would be more accurate, the 621 (327mm inner barrel) or the 623 (400mm inner barrel) at stock speeds (400 FPS)? What if I want to downgrade to 300 FPS?
@@danielwang5467 Thank you for the compliment! If people have taken the time to comment or ask a question then its important to me to come back to them and give them an answer if I can! As with the barrels, if you are running them at stock speeds and then potentially going to lower the FPS, the longer one would generally be expected to give the bb a more stable flight meaning there is less likely to be spread at the end of the flight of the bb. But this can depend on how clean the barrel is and the conditions on the day. In all honesty you probably wouldn't notice any real difference between them. Hope that helps! Pheas
true. this rarely happens with other TH-camrs. you're the best
I won one of these in an Instagram giveaway. I'm stoked, can't wait to get it when it is delivered today.
Thats so cool wish I could win something :D
@@AAA-1-k2j I never thought that I'd win. It was awesome.
@Mjhops760 It shoots great, and accurate.
@Mjhops760 Mine is the Cyma 6.22
@Mjhops760 Not yet the pinion gear came off of the motor and is stuck inside the gun keeping it from firing. I'm going to get the rear out and get a new motor then I will take it to the field.
Ok I was going to go for the 506, but I saw your review of this and I've just gone and bought it. SUPER EXCITED!
Good choice! Let me know what you think when you get it! Pheas
@@PheasAirsoft As I wait on this gun to arrive I'm already wondering about a decent pistol/handgun as a secondary. Do you have any recommendations on that front, please?
@@Mr1drew Hiya. Gbb pistols are great and a lot of fun, my wife runs an army R32 with c02 mags and loves it, and the jw3 tti pistol is a nice piece, my son runs the kjw MK1 non blow back and although a little inaccurate it's a great little piece and super cheap. However for me gas blow backs are not always great in British weather and I'm a massive fan of electric pistols. The cyma ones now with the MOSFET in are better than ever and such good value, no you don't get the recoil but you get all year round consistency and option of full auto if things go sideways. There are sooo many options out that right now, it's hard to pick a bad one really I suppose. I will say that it's a rare occasion my pistol is ever drawn and if I do use it it's usually because I've taken it as a primary and left my rifle in the safe zone. Hope that helps! Pheas
@@PheasAirsoft That does help, thanks! Being based in Ireland myself my airsoft friends say gas isn't great in cold climates so it's perhaps more of a summer gun than a winter one. Maybe I'll "hold fire" on buying that (pun intended). Thanks again!
@@Mr1drew Hi andrew, any update on the gun? how's using it been?
Excellent review mate. Keep up the good work
Wow. Best gun to buy. and I wouldn't be afraid to invest in an upgrade at all
Helped a lot as you know I was in a little bit of a unsure state earlier with lots of people telling me different things.now I know what I’m going to get no doubt about it
Glad I could help! Always great to hear positive feedback back from people! Pheas
fantastic review, please do more of these cyma guns there are a lot of people out here (including me!) who want to know what's worth it as a first gun, range of price to performance etc, all that goodness, got a sub out of me regardless though keep them coming champ!
edit: thank you for the heart man all love to you and your family from your new irish fan in these hard times!
oh, editing removes the heart, fuck
lmao@@sonicblast1223
Wow this gun is a really good deal, I think G&G combat machines are a waste of money now
I couldn't agree more. Other manufacturers should really be worried!
Exactly cus combat machines cost like 180 euros and with 60 to 80 euros cheaper u get a better gun with a mosfet
@@PheasAirsoft cyma products are very good right?
@@Frambhueee They are very very good! Keep getting better too! For the money they are outstanding! Pheas
😁 realy ? Try compare hop Up units cyma /g&g (i have arp9) ....i Can hop 0.43 bbs...without upgrade
I have to say I am perkeleen (finnish swear word almost same meaning as "bloody fucking" in this case) impressed with this cyma and for such a cheap price this is a damn impressive product from cyma. Just goes to show that cyma has really pumped up their game with their new products.
Awesome video too keep up the good work.
Torilla tavataan
Amazing vid, I saw the wep on Taiwan and wanted to buy but there were no videos of it, and I check ur videos and there it is, just posted, a great review of it.
Can't wait for you to open it up!
Great vid!!
Thank you for the comment. Glad it was what you needed!
I'm getting this just because it not a spring loaded and im currently saving for a co2 blowback
I got the 622, which is the same gun and same price, just has full mlock and the front sight is build in the rail (so if not in use as sight it can be used to mount something like a laser). This with a 11.1 lipo is a beast for the price. I doubt you get a better starter gun as said in the video.
Btw, I have the same problem with that little lid in the stock, always need to use something like a screwdriver or allen key.
Glad you liked it as much as I did. The stock is just about the only bad design choice on it for me. Other than that outstanding value for getting into Airsoft.
Any quality issues so far?
@@mereimages1844 Hiya, this is owned by my friend and the cm506 is owned by my son, between them so far they have each had over 10,000 rounds them and they are still going strong. They have been through a few different weather conditions and the cm.506 (my son is really clumsy) has been through mod twice and still kicking ass with it. Hope that helps. Pheas
Has been pretty sollid so far, only thing that happen twice is having to adjust the motor hight with the bottom screw. This came a bit lose. But you instantly notice by the sound, simply adjust screw and good to go. This could be due to the 11.1 lipo
@@Boehoeification Thank you for quick reply! I'm looking at following your lead and getting the 11.1 lipo.
Interesting enough, I remember buying the Cybergun M4A1 Keymod and it's the exact same one as the CYMA. Not sure what's the difference, but it's still a good starter rifle for both CYMA and Cybergun.
I am guessing that they are probably both made by CYMA and then just rebranded by Cybergun.
Pheas Airsoft correct
I have one of these its great it works in cold hot its esspically cold in north carolina it gets to 33 degrees in the winter also great video!
Do I gonna buy it as a 2 gun
?
AlphaWxlf x im sorry I have bad English but is it worth to buy the cyma m4
@@colig-sh5rn yes its a great starter gun but make sure to get 9.6 v battery and a charger too its a very clean realistic and has a really great performance on the field to so yes you should get it if your new to airsoft
And if you want a reliable side arm make sure to check out some 1911 gas blowback pistols
Hey, I just bought one of these and having the same issue where I don’t know how to get to the battery compartment.. when will you be doing the disassembly video? Thanks
Check the manual. Dont own this gun yet, but usually when it's running butterfly batteries, theres a removable plate at the end of the stock.
Pinch 2 tabs on the stock. Plate should come off and reveals the battery plugs.
What’s the link
@@makashi1924 the connector is small tamiya
He shows how do get into the batter compartment
i like ak's but damn, might have to get me one of these if and when i start airsofting!
They are excellent for the money... although my new hottness in this price range is the Double Eagle M904 series... so much more on offer for pretty much the same price!!! Pheas
@@PheasAirsoft yeah thanks however thr 621 is now just 70 quid!
There are so many CYMA M4s. Which M4 is the cheapest, and which one is the most expensive? Could you also please list all CYMA’s M4?
Can’t wait for the 518 unboxing mate ✌🏽
That reminds me of the XK/HK416.
THANKS MAN THIS VIDEO IS REALLY HELPFULL
I like this one, however im debating if I should buy this one airsoft rifle or the cyma sport tactical ak47 aeg with the folding stock, so can someone give me their opinion on both guns and which one i should buy, cause I want one but im debating on which one I should get
can you use a 11.1v battery for it or do you have to change gears so it won't break the gearbox??
Hiya, You can use an 11.1v out of the box, how long it will last is anyones guess. My friend has a CM.506 which he runs on an 11.1v its completely stock and is still running, but others haven't had as much luck. I would say if you want to run the 11.1 it might be worth the upgrade of gearset, but it will run for a while as it! Pheas
Pheas Airsoft thank you very Much I actually bought this gun because of your review!
@@nikistarwars That's a massive compliment for me! Pheas
Pheas Airsoft btw could you do an upgrade guide of the gearbox for this gun that would be amazing! XD
@@nikistarwars Unfortunatley I don't have this anymore, however I do regularly get tech work to do, so when something similar (or this one) comes across my tech bench for some work doing, I will of course make a video from it. Pheas
Does it come with batteries and a charger for the $100 price?
Hello, the price may have changed since this video released (worlds gone a bit crazy) but generally the price includes the charger and battery, but check the retailer first as some dont include them for some reason. Pheas
Imean, the bolt catch wouldnt work unless you have an empty mag inserted no?
Hey so I bought this gun a month ago, but the battery and charger wasn’t included so I bought a 9.6v Battery & Charger. The battery won’t charger though, I read reviews and someone said “coupling doesn’t match” is there anyway to fix this?
Hiya. When you put the connectors of the charger and the battery together, do the colours of the wires match? So you should be able to put red to red and black to black, if not then one of them is wired the wrong way around and will need to have a new connector on it. I would look at the battery connecting to the gun, do the colours of the wires match there? If you can figure out which one is wrong then it shouldn't be too hard to change the connector over to match (but you will need to buy a new connector) Pheas
@@PheasAirsoft hey so the battery was perfect but the problem was my air nozzle wasn’t moving so I have to get a new tappet and a new nozzle, I think this is the same problem everybody else is having, I’ll update when I get the part and try and fix my gun
Hi i have just purchased the CYMA CM 650a which has MOSFET fitted, ( i assume the same one) do you know if this MOSFET protects the LiPo batteries discharge if so how, is it an alarm or does it just stop working. Many thanks
Hiya, I honestly couldn't say. I haven't found any form of instruction book for it or information about it online. I should have thought of this.. next time I have a CYMA with the mosfet I will see if I can run the battery to flat and see if any protection kicks in. Sorry I can't be any more help! Pheas
Any chance to test and chrono a working CM.032 M14 variant? I know that the one you previously filmed had was faulty. Bad luck, I own one in olive green, 100% working, and with side rail attached and scope 3-9x40EG weight a ton (4.5 kg), more than original weapon was. But that gives me a happy sweat and makes me a fitness hero when using it.
Although is in the range of 360's, which is a bit weak for DMR style gun in Europe, it lift great .28 BB's. The only downside is ver.7 gearbox, which looks a living nightmare to work to...
I have spotted an issue though, if you press very briefly and incomplete the trigger, is going to arm the piston, but it will release it only with the next pull. Every single trigger pull have to be complete and steady, otherwise you likely run into mechanical issues. Also when battery deplete, gearbox makes a noise like it breaks down, but switching batteries the scary sound disappear.
Hiya. I dont have it any more, and the issue with it was an abundance of grease in the top of the motor, cleared it out and it was great again. If I get hold of another, I usually end up buying the same guns over and over then I will make sure to do a video. WIth the trigger that is inherent in them all, only way to solve that easily is like you said, a full trigger pull. After that it maybe get a mosfet fitted. Hope that helps. Pheas
would you still recommend this as a cheap starting gun or do you think there is better come out since? love the vids so useful for starting of airsoft
Hiya! I have a new fav budget one now lol. It's the Double Eagle M904 series with the falcon control system. They are slightly more expensive than this cyma (£100ish for the gun) they have as good externals, the mosfet is significantly better and more reliable than the one cyma is currently using as well. The videos I've been releasing, including today's, use a pretty much standard m904 for a DMR and they are outstanding for the money. Don't get me wrong these cm.621 are still good, but not as good as the 904 for only a bit more money. Pheas
Is the CM620 pretty much the same gun with different hand guard set up? I'm having trouble finding any information about these. Like how long they have been released or even basic specs. I've seen CM620 621 622 and 623 online they all look very similar but just wondering how similar the builds are. Thank you
Hello! They are (internally) identical. There maybe some barrel length differences but that's it, so anything I've covered in the unboxing and disassembly should stand for the 620. Pheas
@@PheasAirsoft awesome thank you for the reply. One last thing how long ago was this model released?
@@drypyro69 I think this model originally was fairly new just before this video first went out in Feb 2020. Pheas
Got this gun and am super chuffed, it's fantastic. I also ordered a 7.4 Lipo and a smart charger. However, I've heard that Lipos can sometimes burn up or even explode in the gun if too low on charge?
Good choice in starter!! Massive compliment for me that I have influenced what someone has bought!
As for Lipos, they are completely safe provided you treat them as they need to be treated. First of all don't poke them with sharp edges (such as blades or screw driver tips) not that anyone would but just to be safe.
Next you are more likely to damage the cells so they cant be recharged by over discharging them (by shooting your gun) than you are to make them actually explode. For this you have a couple of options, depending on your Mah capacity and how trigger happy you are you will get a good idea of how long a battery should / will last. So my 2200 mah 7.4v I know will handle my heavy trigger finger all day and have mah to spare by the bucket load. However a 1200mah which I put in the wifes cm.077C i know will last roughly half a day so to be safe I switch it at lunch time to make sure its not over drained. To add to this if you are playing and suddenly your rate of fire gets slow and is steadily slowing down. STOP SHOOTING!! change and charge the battery.
ALSO DONT LEAVE THEM PLUGGED INTO THE GUN, always disconnect and remove them after a days play, especially if you have a mosfet as it will slowly drain down the battery and potentially leave it dead forever!
You could instead get yourself a lipo alarm which is a little alarm that plugs into the white balance connector. This will warn you if the battery is getting dangerously low charge in it and indicates to change the battery, it may also beep whilst using it, even through the mah is high enough, as the gearbox / motor may be drawing too much and the alarm will warn you of this usually with a single beep whilst firing.
I actually have a couple of spare alarms, so if you drop me an email I will send you one for free!! How nice am I!
Hope that helps and is useful!
Pheas
That's very kind of you thank you Pheas! I actually took inspiration from you on the battery front too and got an iPower 22000mAh 7.4v 20c battery from TaiwanGun, as well as a smart charger with the green light to indicate fully charged, etc.
I mean, I certainly wouldn't say no to a spare alarm if you're sure... lol
@@Mr1drew drop me an email to pheasairsoftyt@gmail.com and I will sort you one out!
Let me know how you get on with the 621 once you have played with it!
Pheas
Hey man,
I picked one of these up and plugged the battery that came with it in to hear no MOSFET sound, I'm pretty new to Airsoft so I'm not sure if this is a battery issue or a problem with the internals.
Any advice would be appreciated 👍
Your battery is most likely you dead or something is wrong with your MOSFET
Hello there. What is the best option cm.623 or cm.028A and why? Thank in advance
Hey! you should review the Golden Eagle MC6604! It's a budget GBBR!
Thanks for the suggestion. I will stick it on my list!
Now called the CM.515
Hiya, the 515 is the same externals but not the same internals. This model has the mosfet in it and the tight bore, the 515 has the standard gearbox and barrel.
@@PheasAirsoft oh ok! thx!
@@LLLexen it's all good. Both are excellent out of the box and you wouldn't be disappointed with either, but if you had the extra little bit of cash for the upgrade then the 621 just pips it over the 515 because it has those upgrades internals that most people would do anyway eventually. Pheas
@@PheasAirsoft also i haven't talked to you in a while if you remember me!
@@LLLexen I do indeed remember you. Hope you are well and staying safe. Pheas
Hi, would you recommend me using 11,1 volt battery? I use 9,6 volt battery now. I am from Czech Republic and my version has 430 fps.
Hiya. I would not recommend unless you are going to replace the mosfet with a better one. I have just replaced the normal mosfet as the owner was using a 9.6v nihm I believe and even that has fried it. So I would stick to 7.4 lipo or 8.4v nihm. Hope that helps! Pheas
@@PheasAirsoft ok, thank you btw I love your videos.
@@explaymer7497 Glad I could help and really glad you like my videos! Pheas
Wonder what will happen with Taiwan Gun orders now we have left? Will be it with same import and handling charges as from HK?
Hiya, thanks for the comment. As far as I can tell, for the next 11 months nothing had changed and stuff will still come and go as it has done. After the end of this year is when new trade deals will come into effect. So for now you are all good to order! Hope that helps! Pheas
I was scratching my head for like 5 mins before I figured you were talking about brexit (atleast I assume so sry if I'm correct)
@@asomim1208 we were indeed talking about Brexit. Well spotted!
marko laakso Yup.
Great content! Have you opened this up yet? What are the internals like?
hey i just bought this gun but i’m having trouble fitting the battery in the stock. it’s an 8.4v butterfly battery but the stock isn’t big enough to fit them. am i doing something wrong or do i just need smaller batteries ?
Hiya, are you trying to fit the included battery in the stock, or have you bought another one?
If it is the included one here is a guide that should help: th-cam.com/video/eO9HcDz6LvE/w-d-xo.html
If its an aftermarket one, is the battery too long? or just too wide?
Pheas
your video helped a lot, but i’m still having trouble getting that piece in the back of the stock off.
@@bengosa6335 it can be stiff and a pain to pull out. When you take the back plate off (the bit with the rubber pad on it) there is a hook type thing at the top, I use that to help me pry it out at times. Does that help? Pheas
yeah that helped a lot thanks. i got it working now :)
yea defi the best option out there for a 115€ buy even if you are blind
Just bought one, thanks
Hey! Does the mosfet need a lipo to make a start up noise? I have one and i run NiMh but it doesn't make a sound
Hiya. It should boot up as normal with any charged battery. It may be that they have sent you the wrong (earlier model) or possibly the chip doesn't make the sound. Hope you get to the bottom of it. Pheas
I bought it and the gun fires at 410 fps. I bought a m100 spring and it dropped at 390. I want to drop at 350-360 fps. Should i use a m90?
Hiya. If the 100 gave you 390 then you have good airseals and the m90 should get you to where you want it. Might even have to go to an m85. Good luck with it! Pheas
I have one of these and was curious if this could handle a 30k motor withouvht damaging it. Would you recommend it?
Hello! It should be ok I would have thought to run the 30k motor! The same internals can be found the cm.506 and my son's runs a high speed motor and MOSFET and still no issues! Pheas
Thanks, looking to get upgrades fo it and not skilled enough to even come close to the gearbox
Hi, great review!
Do you know what the difference is between the cm.621 and the cm.623?
I think its only the barrel lenght, but the 623 has a longer barrel and it is also cheaper so maybe theres a difference in internals..
I know its a bit late to ask but what website did u get it im looking at them for around £150
Hiya. I got this one originally (pre-brexit) from taiwangun.com, in country, the £150 mark is about the normal now. I would however like to offer an alternative to this... The Double Eagle M904 series, similar price, but sooo much better. The ETU (Mosfet) has programmable features and it is generally better built than this cm.621 with very little difference in price. You can get either from Taiwangun, but likely that you would get hit for customs fees which will lift the price. Hope that helps. Pheas
www.evike.com/products/95681/
Just bought one it arrives in 2 days
I bet you are buzzing for it to arrive!! Pheas
Since I'm gonna be new to airsoft.. just wondering if Taiwan gun do two tone versions or if I will have to pay for one over here for it to be two toned
Hiya, thanks for the question. Historically they haven't done a two toning service, it's just as they come only. But it I haven't had to ask in a long time so things may have changed. It is worth a quick Facebook message or email to them to see what they say! Pheas
You may just want to rent a few times to get a UKARA no, getting a 2 tone will just give your position away....
@@ArchieKeen1 excellent advice on both accounts!
Ok thanks I look into renting for my first visits
Hi so I just was asking about the little spring that goes on the bolt cover and connects to the hopper mine got lost and I wanted to know if you knew what that spring was call so I can get it
Its usually a dust cover spring we call it. Pheas
Can u please start adding links to buy the gun
Would you say its worth the extra £100 for the cyma platinum?
Hiya, thanks for the question. That's a very hard one to answer in all honesty. If you have the money then the metal externals are a bit nicer looking to me and will last you longer so if you have the money (and prefer the look) then go for the platinum. If you don't have the money then this model is a better spend. Internally they are pretty much identical so will mostly depend on your budget and preference for looks. Hope that helps! Pheas
hey! it's been more than a year since that review, have you ever used it? do you still have it? I just wanna know about its longevity. thanks for the review!
Hello! I don't have it any more, I sold it on not long after, however... I do hear from alot of people that have been running them longer term. Generally they are still running well and nice, some of the older ones (earliest versions) seem to have got bad MOSFETs that fried after too high battery or just for no apparent reason. I had one recently that I removed their MOSFET and wired in a gate merf and the owner was sooo much happier for it! But they generally seem to be doing really well even after 12 months! Hope that helps! Pheas
Bite the bulled and go for the Combat Machine CM18 Mod1...
Can you do a review on cm650b at 47 m-lok
Hiya, thanks for the comment. I will add that to my list of requests to get and sort it as soon as I do another order. Pheas
@@PheasAirsoft cheers
Hey, can you take the iron sights for replacing with an optic
hiya, they come off easily! Just a screw to take out and that's it! Pheas
It’s actually really good can’t you upgrade it to?
Hiya. Yep, it's fully upgradable. It's a standard Airsoft m4 so compatible with any and all parts really such as other mosfets, gear sets, barrels etc. Pheas
I've always had full metal guns, how does it feel to have a gun that is lighter? Is it disturbing or still a bit heavy?
Hiya. There is still a good weight to it, obviously not as heavy as a full metal but you don't notice it as much as you would think. Pheas
@@PheasAirsoft Thanks a lot man, greetings from France!
its better then cm.5xx ...actually I was supposed to buy this replica but I chose the mk12 mod1 spr from Dbell
Hello! The dbell stuff is very good and surprisingly cheap. Some areas of the internals are not quite up to the Cyma stuff. But the price for them is just too good to pass up! Good choice! Pheas
Hi mate love your vids. I've just bought this same gun and my semi auto isn't working, it just shoot full auto. Also when I plug in my battery I don't hear the sound of the mosfet. I've tried the battery that it comes with and an 11.1 lipo and still the same results. Any idea what the issue could be? I'm quite new to airsoft so pretty clueless
So it shoots in full auto even when set to semi?
Sounds like the cut off level isn't connecting properly or the selector isn't working properly.
As for the mosfet, if there is no sound then I would suspect that it may not have one in it.
Did you buy it brand new?
Pheas
@@PheasAirsoft thanks for the reply. www.bespokeairsoft.co.uk/cyma-m4-keymod-nylon-fibre-mosfet-qd-spring-inc-bat-charger-cm621 this is the gun I ordered but in two tone. Yes its brand new just got it on Saturday, I ordered it after watching your review. Think I'm going to have to try send it back as its fault and I've not got the experience behind me to go fixing it myself. Thanks again for the reply keep up the good work
@@PheasAirsoft recap, managed to fix it after many tutorials haha, my selector wasn't working properly like u said. It definitely has a mosfit in it but doesn't make a sound when I plug it in. My brother just got the g&g raider 2.0 le and his mosfit also doesn't make a sound when he plugs in his battery but he can still switch his to 3 round burst etc, any ideas why this might be?
The guns seem to be working as they should tho
@@davidyeats9578 if they are working as they should then that's great news! As with the mosfet the g&g one is programmable where as the cyma one isn't, it's just something to increase the performance (how quick it responds to trigger pull and how quick it can complete a shot) of your aeg by getting the power more directly to the motor. They Aren't all programmable for burst mode etc. The cyma ones I thought all made a sound when they booted up but I'm guessing they may have removed that feature on some lines. MOSFETs don't always make a sound at boot up, some of them are silent start and some vibrate the motor to indicate it has booted up. Good luck with it in future, glad you got it running! Pheas
So what's the difference between this and the 622? 🤔 Is it just the overall length?
@Pheas Airsoft On Evikes website the gun shows a orange tip, does it come with an orange tip from there site or is it black like yours
???
Hiya. If you are buying in the US then it will generally come with the orange tip (Law dictates it needs to have it, or so I am lead to believe) Outside of the US generally it comes with the black one as other countries dont require the orange tip. Hope that helps! Pheas
@@PheasAirsoft thank you....
Great video
Thanks man, glad you liked it!
Hi pheas ,
I was thinking about getting an army armament m1911 from Taiwan gun any chance you could review it thanks
Hi, thanks for the comment. Which particular version are you interested in, I am building up to another taiwan gun order at the moment! Pheas
I would love if you could review the r31
Thanks
@@sammyfeenanelevine4583 I will make a note and sort that out!
Thanks pheas
anyone know where i can find the 11.1 lipo at? im building myself a new kit so i can swap through my guns and have something friends can use when they come over but i dont want it to be stock (slow).
I have a question, do most Cyma m4’s have a functioning forward assist and dust cover? I’m new to airsoft and am trying to find a quality gun. Mainly the Cyma jungle m4 carbine because it is cheaper quality so I’m not sure if everything works on it. I’ve had psat experience with duds.
Hello! It is very hit and miss. Some yes some no, Even within a brand some models will have it other will not.... Doesnt even link to price either as I have seen some higher end models not have it, which is crazy for how much some of them cost. Pheas
@@PheasAirsoft well that sucks, but I think I’ve found one that might be good.
I've read online that CYMA m4s have had quality control issues in the past. Do you think CYMA is beyond that now?
In the first year or two that they were around I would defo say there were the odd lemon from them but now they make exceptional stuff. I've not had a bad one in years. Obviously the budget end are not as well engineered as the top range cymas but even at the bottom end they are still excellent quality. Pheas
I'm gonna buy it in 3 months then put the novristch ssg 10 sniper spring in there it's not gonna be 220 it's gonna be 140 I just play backyard airsoft with my friends and I only want about 475 fps and also battery upgrade which should be easy and since it's full metal I'm not gonna be afraid to be rough with it my birthday coming up on Christmas and I get 50 dollars a month so I'm gonna start saving up
Just to be clear I have a giant yard so I want the range
Just don't use it with an 11.1v as the MOSFET will be broken in no time. Pheas
can you review the lancer tactical 15? its also around the same price but has a gen 2 gearbox
Hiya. I've had a couple of suggestions for the lancer tac stuff. I'll bump it up my priority list and get one sorted after the current orders have come in and been sold off. Pheas
oh, i love a tight little barrel.
I thought it's 100€ since it's 100£ for you, but boyyy was i wrong...It's 125€, so be aware
It is a bit rubbish the way prices don't always translate across currencies. Pheas
@@PheasAirsoft true...
I wish I had this gun to use because my old airsoft gun broke and I can't play anymore
Hiya, sorry to hear your gun broke, but this is well worth the investment if you do get the money together to get a new one. Is there not a tech local to you that could repair yours? Pheas
When ever I plug in a battery it plays this loud alarm, can anyone please help me and tell me what that’s supposed to mean?
what websites would you recommend purchasing from? (uk)
Hiya, That is a good question! I have bought loads from Fire-Support they are really good, Patrol base are good too, I recently discovered Urban Airsoft Uk and they are amazing! Loads of stuff in stock and their store is ace, well worth a visit if you are near by. Airsoft world is somewhere i regularly pick up bits from too and Eagle 6 are pretty good for marui parts and guns. Hope that helps! Pheas
Hello i don't know if you answer but are the rails on the barrell removable? With an Allen or a screwdriver?
Hello! Yes they are. I can't remember the size needed (might even be in the box) but you loosen the bolts and the rail will slide backwards and lift out. Pheas
@@PheasAirsoftthanks man I'm gonna buy it thanks for the review❤
Is the m-lok handguard a 10' one? because im currently looking at (i think) the same m4 but dont know if i should get the 14' or 10' handgaurd
Hiya. I believe it is the 10" one. If it was me I would get the 10" as I can't find a reason for the extra space on the rail and I prefer the looks of the shorter one with the outer barrel exposed. But its down to your preference on the looks. You pick the one that makes you say "DAMN THAT LOOKS GOOD!" Good luck picking one! Pheas
@@PheasAirsoft 😂👍 YEAH! well I always did kinda like the 10' one so I guess . . .yeah! thx dude!
Did you get charged import tax on any of these orders? Great vid btw
Hiya. All of these were from before Brexit, so were all "free" imports. I have a tester order currently in brexit limbo with UPS and not idea what will happen. Alot of people are saying their parcels are being returned to Taiwangun.. some saying theirs have come through with no customs. Its a hot mess right now. Pheas
@@PheasAirsoft Thanks for the heads up mate much appreciated.
@@RNDM-nd7tj You are very welcome! Pheas
Hey, I’ve bought this gun since seeing this amazing review!!! However I’m having trouble with my kublai mid cap polymer magazines :( (not feeding at all) can you recommend some mid cap magazines that will work with this rifle???
Hiya. thank you for the massive compliment that I encouraged you to get this!! With the midcaps, if you put BBs into the mag, if you press the release on top to let the bbs out, do they all fly out with force, or do that trickle out, or just sit in the mag, as the feeding issues could be that they haven't bedded in yet.
If the BBs just fly out of the top, then there is a fit issue, you could try moving the mag forwards in the mag well (or backward if it helps) to try and connect with the hop better and see if that helps. Some people fine they need to put a bit of tape or velcro on mags or the magwell to make their mags fit and feed.
If you just want to go for new mags anyways then I would suggest just the CYMA ones as they will fit and feed in it happily. I am sure other brand will do as well!
Let me know how you get on !
Pheas
Cheers for the reply man! Turns out you were right it’s a feeding issue so magazine needs to be pushed forward so I guess I’ll stick a little tape in the magazine we’ll, anyhow what mags have you guys been using with this gun?
@@khaljabbar6817 Glad it sorted it! Pheas
Hey will a 11.1v lipo battery work good with this or would it damage the gear box
Hiya! The gearbox will degrade quicker due to the 11.1v but its more the mosfet that wont deal with it. Alot of reports of the mosfet burning out on an 11.1 (or the microswitch on the trigger just breaking in general) so I would advise a 7.4v lipo with a high speed motor if you want the high rate of fire. Hope that helps. Pheas
@@PheasAirsoft what if I pressed Tune up service re shiming and re lubricate gearbox would it make a difference
@@marquisnoeggerath950 Hiya again. not to the MOSFET it don't. They will adjust the gearset for the smoothest (in theory) operation, but the MOSFET wouldn't be messed with at all. Pheas
@@PheasAirsoft so basically how would I make it fast with 7.4 lipo
@@PheasAirsofthey just one more question. What motor do I get for it
What bbs would u recommend for this gun ?
Hiya. I always use 0.25g BBS as I find them give a nice range and accuracy over 0.2 and 0.23g BBS. Pheas
sorry does this have a screw thread to attatch sliencers etc ?
Hiya. Yes it does. It's 14mm negative. So you can buy which ever accessory you want. Pheas
Is the iron sight good because I can't tell. I'm a beginner player btw
Hiya, its more than good enough to aquire targets with and aim! Pheas
Do you conside the 11.1 Lipo Battery for this gun?
Hello! If you get one of the newer series (fixed mosfet issues) then yes, an 11.1 will be fine in it. Pheas
it says it doesn't come with the battery on the website but it did in your box does it actually come with the battery?
Hello, it can be batch and retailer dependant. If the website says no battery then I wouldn't expect one to come, I believe of late they have not come with them as nihms seems to be causing issues with the mosfet for some people. Pheas.
Can you put the m203 Grenade Launcher on this?
HIya, you can add a keymod rail to the bottom and mount a ris mounted m203, but if you wanted a barrel mounted one you will need to replace the handguard with one thats open on the bottom. Pheas
There’s 2 settings for a charger does it matter what I put it on ?
What are the two settings on yours, Not sure if I have seen one with 2 settings before. Pheas
High speed motor in ?
It did look like their new style high speed motor, but I wasn't quite as convinced about its performance compared to the one in the 97 and 98 platinum series. Pheas
Hey I just got one of these and I don’t know what battery to get could someone please link it
Hiya. I would look to get a 7.4v lipo for this. There seems to be a rising number of people that have said that they have run 11.1v and it has burnt out the mosfet. I have replaced a couple of them myself with standard trigger blocks and after market mosfets. So look for a lipo that is split into two halves like this: www.componentshop.co.uk/7-4v-2200mah-20c-continuous-discharge-airsoft-split-pack-lipo-battery.html Something like that will power it ALL day long and sit nicely in the stock! Hope that helps and sorry for the delay in replying. Pheas
Can you leave. A link of where you got this?
www.taiwangun.com/assault-rifle-aeg/cm-621-mosfet-edition-black-cyma there you go. Pheas
How do the batteries fit in the stock?? I can’t close the stock whenever I have the battteries in
It can be a little bit fiddly. Just to check, what type of battery are you putting in there and to you mean close the battery cover or collapse the stock (moving it in and out). If you let me know I will do a quick requested video for you today and post it. Pheas
@@PheasAirsoft hi I have bought the same gun can you please show us how to insert the battery
@@benny3828 Hi in about 30 mins the video will be live on my channel on how to put it in including a little mod to make it quicker and easier for you too. I am just rendering it and uploading it. Pheas
@@PheasAirsoft thank you so much
Hello are you aware that it’s now £180 pounds in their website😢
I was not. Unfortunately in the 3 years since this video released ALOT happened with airsoft prices. Part of the reason I no longer comment on the prices if I can avoid it as you can no longer be sure what will happen. Pheas
Hey where could I buy this except taiwan guns
Is that ready out of the box for 11.1v battery ?
Hiya, out of the box probably not, I don't think the gearset would hold out long term. You could drop in a high speed motor instead and get very close to the performance. Pheas
How big are the rails?
you can choose between 10", 13", or 14"
Hi great and informed video once again anychance of a link to where you get it from I can only find them for £150
thanks paul
💪💪💪👊👊👊
Hiya, thanks for the compliment and question. Here is the link to where I got it from: www.taiwangun.com/en/electric/cm-621-mosfet-edition-black-cyma?from=listing&campaign-id=14&q=Cm.621
Hope that helps! Pheas
@@PheasAirsoft thanks mate 👍👍👍
What’s the length on this one
Can you review MOD 24.
Hiya. I will add that to me list of suggestions and get one when I can! Pheas
If I buy this off evike will it be the mosfet version?
hiya, if it's the same model as this with the same model number then it should have the mosfet, but I would contact them directly and check before you order to be certain. Pheas
Does it come with the battery and the charger?
Hiya. Mine did back when I got it, however people are saying that it's hit and miss in newer ones for the battery and charger to be in there. Some have them and some have none. Pheas
amazon or evike link?
Hiya. I believe this is the same one on evike
www.evike.com/products/10273/
Pheas