3G Open Root Plate Test | 6010 & 7018 | Stick Welding
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Today we got a special guest Merle Swaggart doing his version of an open root plate test. He is welding a 1/2" plate using the stick welding process. The root and hot pass will be welded with a 6010 rod and the fill and cap will be with a 7018 rod!
👇WeldTube Store👇
www.weldlife.com
Lets see the back side 👌🥳🤷♂️🙋🏻♂️
Right
No kidding lol
😂 !!
😂I’m sure he got enough penetration
Why you not show to us about the back side bro
Doing this tomorrow in class. Awesome job and video, thanks!!
Starting these in class tonight. Nice vid. Thanks
thanks for this video, I loved the overall explanation by the merle. Keep coming up with such content.
Very detailed and precise. Thanks for being informative. Appreciate the tips. Nice work by the way. 💯
Very nice, like the technique on the cover pass, circle left pause, then the middle, then circle right pause!
Nice job!
Im currently doing this right now. Good to see some other POV’s of how someone else does it just to help out. Good video
Nice
This would run on me every time I welding up with 7018 the whole thing running away on me and it looks bad.
You make it look so easy.
Try consantrating on your ark length, you don't want it to be to long
Thank you
I going to try that next time
Helpful video, thanks Merle!
It amazes me how simple your welding tests are in the states here in chinada where only allowed a wire wheel no removing any metal. You have to have a backing plate and you have to demonstrate atleast 2 stop and starts your root gets visual inspection for undercut and on your hot pass your not allowed to go up and down only side to side as the up down traps slag and destroys the structural integrity of your weld and the once you finally get your cap on you get choose either bend test or x-ray test always choose the bend test because if they find any slag on the x-ray test fail if your plate bends into a perfect U with no cracks and no slag spots over 1/32 of an inch show on the back side of the bend you pass
No it’s just one of the test. They test you on many things.
Yeah, that's a totally different test. We do that as well. Backing plate tests are gravy compared to open root.
When I took my test many years ago we didn't get to set up the test plates ( the inspector did ) and all passes were done with 7018 and no grinding allowed. Hand wire brush ,scratch awl and chipping hammer.never strike the slag with the hammer .
Great Techniques! Welding with confidence, thanks👍
You're my favorite Rosendo!!
He talking lots about technique, but not showing the actual welds, in between passes....
Very good technique for not showing root pass…
Great video
Definitely agree with all the positive remarks here !! But just curious why they didn't show any of the weld till after it was completed...🤷♂️ exc. Here's the root pass completed, Here's the hot pass completed
Here's the fill pass completed
Muy buen video, bien explicado. Solo me hubiera gustado ver como queda cada pase el de raíz y los de terminación, tal vez si los hubieras cepillado y mostrado para ver los cordones. Saludos desde Nicaragua
Wow that guy is a good ass Welder his skills shows thats his on another level.
Name like that, you better be a welder!! Lol, great video!!
I've never seen the up-down-left-right movement before.
How long you been welding Mark?? We call it the Christmas tree technique here. Very common, in saying that some welding firms here don't allow weaving at all.. straight up stringers all the way out
The up then down side to side is the T-technique for 6010 or also for 6011 leaves a nice stack of dimes if done correctly.
How are ur fingers not smoking I can’t cue stick more then half a rod
Instead of having a 6010 hot pass can I use a 7018 for the hot pass
yes 7018 1/8 run it around 120 amps or 3/32 7018 at around 90/95 amps
Damn, resendo looks so much more different from his first couple vids
🤣
How do you know what pattern to use when making your 1st pass? Do you do circles, whip it &come back, or left right then move up? How do you know what to use or when to use what pattern?
You can do a whip and pause like going back and forth into your puddle or you can just run a straight bead root pass by just going straight no weaving you just gotta go a lil slower to fully stitch the sides and get full penetration.
Merle is awesome
Thanks for the video
good jobs
On criticism I have is the way you set up the root. If you run a heavy 1/8th land and gap, you can run the root at 90 amps like the rest of the test. It's a much easier way to do it in the field. I'm not climbing down off a scaffold to change my heat every time I need to run a root.
You all prolly dont give a shit but does anyone know of a tool to get back into an Instagram account..?
I was dumb forgot the password. I would appreciate any tricks you can offer me!
@Augustus Michael Instablaster =)
@Callan Kyree Thanks so much for your reply. I found the site on google and I'm in the hacking process now.
Takes a while so I will get back to you later with my results.
@Callan Kyree It did the trick and I finally got access to my account again. Im so happy:D
Thank you so much, you saved my account !
@Augustus Michael no problem xD
I swear my problem is filling my undercut. I'm gonna try this at class hope it works
same with me I keep having undercut on the cap and it's always below flush
Moving too fast.
Don't settle on one temp
How much amps needed for root pass? Is it 9mm plate?
You should’ve show the root pass.
Nice Capp.
Looks good
Thank you so much
Nice work
Do you guys bend test your stuff
Hello, excellent thank you very much
Where are these guys testing where they are allowed a grinder for tests? They never let us use a grinder on any test in my trade. That would be awesome.
the best vid and very informative as always gj weldtube fam hope u always have great vids
Good Job homies
in my area they would not let that slide, using a grinder an wire wheel
Im from Indonesian
Best of the best
thx !
why not run stringers?
Tanks .. For this test
up and down hand movement at the root can be processed with 7018 electrode ??
thank u its cool
Great video 💯 subscribed
When I was at welding classes (1978/79/80), if the instructor entered the booth and found us welding with two hands, he would switch the welder OFF and make us start again.....
From scratch. New coupon..!!!
Each to their own I guess.. what ever makes the welder comfortable is best. Tough instructor
@@danieljoseph9553 Those were the days, I guess. (:
I am personally more comfortable welding one handed but if he welds better two handed more power to him.
Yeah well i guess hes saying the welding rod aint that heavy
I'm a millwright, we are taught 1 hand holds the stinger, the other is used to brace yourself. I only use one hand on the rod when I'm welding in a tight space that is hard to control with just one hand, as long as I can lean on something.
How many many amphere is that please answer thankyou
You never show the weld after you finish the pass. I don't get it. It doesn't make sense
Forte the root must electrodes thinner?
Didnt know Keemstar did some sick welding as well as that drama channel
I want saw back side root
Cuando Aran otro video en español
i love it, from philippines
60-10 in Ac o DC???
Nice
Good morning Bro
can you play the music more and louder in your videos ? i love the songs !
How to weld pipeline
Very nice good
Can you also do 7018 hotpass or only 6010
you can do both but others like to use 6010 because is isnt too hot like 7018 theres a chance if you use 7018 you can burn thru depending if you stay too long on that spot , i usually use 6010 but i go downhill on it to finish it quick
We do 7018 all the way.. no change of welding rod. Only amps change. 90amp root run, hot pass and cap 100 - 110. 12mm plate 3-5mm cap. 3.2mm rod 7018
4:14 What kind of grinder is that? Its look smaller and more handheld
Did you weld at 75 amps the whole thing?
Thanks guys Gra8 video....I am currently doing this for a welding assignment soon & I was wondering what’s the lowest I can go on a hot pass cause 90 and 85 amps for me is to hot I can’t move my hands that fast So the puddle flows out on me regular...so is 70-75 good Option Or not ?
Dont get hang up about the amps just keep a tight arc and wet in the toe of your welds. And each machine is different and some can show a different amperage then its actually putting out.
what polarity did you used for 6010 root pass sir? very usefull video. Godbless.
Dcep
@@Username-mt6ok is it ok 6010 rootpass dcep? why not dcen that normally used polarity for 7016?
@@kabakaledwardallan313 Yes. 7016 is mostly used for pipe. And according to where you're working is supposed to be ran dcep not negative.
Wheres the 7018 root to cap always 6010 to 7018
Bro Merle put your safety glasses on 😭 making me nervous af
So after you lay the root down you grind it so it’s all flat in the middle ??
Yep. It should be smooth. No flux.
What amps would you use for a 1/4" plate?
Bout 60-65 would be best.
3,2 caping 110 ampere
❤❤❤❤
Can you do 2G @weldtube
How long should this test take?
Nice.. i want to try..😁😁
Does anybody prefer stringer beads when filling
Why would you do so many weave beads? I was taught 6010 root 7018 hot pass weave then stringers all the way out.
Podrían hacer más en español sería muy bueno
I might try this tomorrow
I feel like I'm missing something he said 3rd and final cap but he only did 2 one the one side and then he went to the other side and im assuming did 2 there as well?
He did one up the left, one in the middle favoring the left side to prevent undercut, and then the 3rd that overlapped the bevel and the 2nd cap
New friends here
There’s a better way of doing it do multiple passes side by side until you get to the cap
I'd like to see em weld it out 1/8 inch gap, land and rod with stringers. Twice as hard
on a vertical I've had the "luck" on doing 3/8 " gap between two beams and last week 3/4" between a steel plate and it's column , man some crazy work do i get some times .
Yea im on that weld now....1/8" gap vertical....hopefully i get past it on monday but next is the same only overhead
You really expect that to pass
Master of manipulation
CAN E6013 ROD DO THE ROOT PASS?
It can but it's not recommended as it's a low penetrating rod designed for thin sheet metal where as the 6010 and 6011 have a hotter burn to them and penetrate better especially on open root welds
He used a weave it's an easier way to do it I like to use a bead it's pretty good
Shouldn't have to use a grinder at all besides cleaning millscale prior to welding it. Ive never grinded down my tacks. I consider it cheating personally
If the root pass looks good from the front it probably looks like shit on the backside. Wonder why we didnt get to see the actual root 🤨
No pusiste las placas de comienzo y remate, te faltó decirnos a cuantos grados es el visel de las placas ,y el lado opuesto para ver la corona de penetración
Claro que las debe llevar para los remates laterales
lets see dat root
Easy
👍
bro looks like noah beck
Be aware, most certs don’t allow grinders whatsoever. It takes away from your working angle and if you just grind away your fuck ups.
عيار الامبير
Pro
Where is the root? You failed.