How to Replace Crankshaft Seal 2001-2005 Honda Civic
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2022
- Buy Now!
New Timing Belt and Component Kit with Water Pump and Seals from 1AAuto.com 1aau.to/ia/1AEEK00301
This video shows you how to install a crankshaft seal on your 2001-2005 Honda Civic.
This process should be similar on the following vehicles:
2001 Honda Civic
2002 Honda Civic
2003 Honda Civic
2004 Honda Civic
2005 Honda Civic
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ogm/1AXAA00013
• 10mm Wrench 1aau.to/obA/1AXAA00010
• 12mm Wrench 1aau.to/obA/1AXAA00010
• 10mm Deep Socket
• 10mm Socket 1aau.to/ofi/1AXAA00017
• 12mm Socket 1aau.to/of7/1AXAA00015
• 14mm Deep Socket
• 14mm Socket 1aau.to/of7/1AXAA00015
• 17mm Socket 1aau.to/of7/1AXAA00015
• 19mm Socket 1aau.to/ocy/1AXAA00043
• 36mm Socket 1aau.to/oe/1AAST00006
• Trim Tool Set 1aau.to/obN/1AXXX00006
• 1/2 Inch Ratchet 1aau.to/ocy/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/ofi/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/of7/1AXAA00015
• Socket Extensions 1aau.to/of7/1AXAA00015
• Torque Wrench 1aau.to/odK/1AXAA00044
• Gloves 1aau.to/oaf/1AXSS00048
• Safety Glasses 1aau.to/o4/1AXAA00343
• 6mm Allen Wrench 1aau.to/om/1AXAA00007
• Floor Jack 1aau.to/obS/1AXAA00068
• Pick 1aau.to/oaZ/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Honda Civic 2001-2005 7th Generation: • Honda Civic 2001-2005 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
you skipped the install of the crank pulley/harmonic balancer, one of the most important parts of this job
I’m glad I have this video but I’m not happy that I have to take all that to repair a little rubber ring😢
Thank you for this video .that sure is a lot of work for just a seal
Thank you for the video
Great video, all that work and you didn’t replace the water pump
Hahaha, and as soon as I finished replacing the timing belt the water pump started leaking. Almost like it was timed that way.... No pun intended.
I had a leak on the outlet of the oil pump, $4 oring. Decided due to the amount of work, changed timing belt, water pump and with 230k miles replaced the oil pump too. Stupidly after I was all done should have done a valve adjustment. Haha.
But great vid anyways
Did the oil pump fail?
No just being proactive
@@5beswee I have a 02 civic with 159000 miles on it... valves were never adjusted, my mechanic friend said not to adjust them, if they've never been adjusted at required mileage intervals... maybe asking for trouble........?????? True or false??
Be aware: d17 only turn the camshaft and crankshaft together, counterclockwise from the crankshaft. Valves can be damaged from improper sequence turning clockwise. I used crankshaft tool.
always remove the engine mount , lots of room to gain by doing that ! hope this helps
Will this be the same for 2004 honda accord v6 3.0?
Looks like a "pain in the ass" job!
Still waiting for him to put the crank seal in. I never saw it. I had to take my old pump off to do it.
In this job. Do I really need to remove the oil pan of if I will change my oil pump?
i have a 1999 Accord EX and it needs new Rear Main Seal ... my question is would i change out the crankshaft seal while im at it ... any anything else i should replace while motor and trans are out?
FYI - im not doing the work myself, my mechanic will.
While fitting back, you have shown the fitting of engine mount bracket twice. One at 45 min and then again on 56 min time line. Please explain wether it was supposed to be fitted after the lower plastic cover or what. Secondly I didn't notice any oil leak from crank seal when you opened it rather the leak seems from oil pan jane.
Is there any other source for oil leak under the timing belt cover, such as for the oil pump?
Could be your valve cover gasket leaking at the corners
I think the gouging of the timing cover could be due to the harmonic balancer needing replacement. The internal rubber goes bad and the part my wobble, hitting cover. The cover could also get gouged if the bolts were loose, or if the mounting tabs on the cover are cracked. Both of those issues could allow the cover flex and hit the balancer.
+@paulstahman3533 Thanks for watching our video! 1aau.to/m/Shop-TRQ
replaced crank seal 2 times and still leaks
What would something like this run if a mechanic did the work?
Look at where this is. (Blocks entire camera with huge head)
You do realize this engine spins counter clockwise! Why everyone spin it clockwise 😑
He ain’t that good.
This video has multiple errors and shows parts of the process incorrectly in addition to omitting parts of the repair procedure. Review a credible source such as a repair manual to learn correct procedure.
What a terrible video. Extreme close ups, out of focus, completely blocked view. If you're going to take the time to make the video why not do a better job to show things clearly?
Why are you rotating it clockwise.. these engines rotate counterclockwise. Which is the direction they have to rotate when confirming timing..