How to replace a bandsaw tyre the easy way. Dave stanton woodworking
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Dave shows you the easy way to replace a bandsaw tyre without damaging the tyre, the wheel or your fingers!
Links to some of the things in my shop. www.davestanto...
If in Australia you can also check out Carbatec. www.carbatec.c...
Join the fun with me backstage at Patreon. Get the low down on upcoming videos, special rewards and more!
/ davestanton
PLANS FOR THE STANTON BENCH AS USED IN THIS VIDEO AVAILABLE HERE. www.etsy.com/a...
WANT TO FIND ME ON SOCIAL NETWORKS?
* Facebook.
www.facebook.c...
* Facebook livestream group. www.facebook.c...
![[TH] 2024 PMSL SEA Finals D1 | Fall | ยิงต้องโหด ให้เหมือนโกรธกันมาก่อน](http://i.ytimg.com/vi/OnTdfGySmds/mqdefault.jpg)
used this method and quite frankly amazed at how easy it made fitting Tyre ------ last time i had to do this took, the skin off just about every finger and struggled for over an hour to complete task. Using this technique to less than 10 minutes to do both tyres ----what a revelation bloody brilliant. well done keep the ideas coming. big thanks.
So glad it worked for you! Thanks for the support and stay tuned for more helpful tips.
Top Vid Dave ... Thanks for enlightening us
Glad you enjoyed it
Totally awesome demonstration. Thanks. I'm about to rennovate a BS that I bought about 10 years ago. I was surprised to discover the tires had completely disintegrated!!!
Glad it was helpful!
Best technique ever. I've replaced tires several times on various saws. Done with ease even in a cool shop, no heat. Just the jig.
Glad it helped
Like many woodworking projects, if you take the time to make a jig, it makes the job simple. Using a bit of scrap, I made this jig and then changed 2 tires in a few minutes, never slipped off once. Thank you!
Cool, thanks
Very ingenious solution to a potentially thumb-busting procedure.
Thanks Brian!
Fantastic ! Will save me heaps of time and effort this morning !!!! Thanks Dave.
Great to hear!
Brilliant technique and demonstration David.
Thanks Rag Tie!
Ingenious. Wish I knew about this BEFORE i did mine. BUT I still have to glue the rubber tire down to the wheel and this looks like a great way to do that. Thank you!
Hi Dave, once again you and I seem to have parallel things in our workshops. We just replaced the tyres on our big bandsaw on our woodwork club machine last Saturday. Yes, we did it in situ and it took three of us working together. The second tyre took about a minute once we got the co- ordination right.
Great work as most of us have to do these things solo.
PS. I Had just given a demo on drawer construction at our woodwork club(same day as above) and next thing I know here you are showing your drawer build for your bench( same week). Another great in depth demo and explanation.
Thanks Dave.
My pleasure Phil!
Amazing! I was worried I couldn't handle the job by myself but now I think I can. Thanks for this excellent info!
Looks like you went from "I can't do it" to "I can do it" in no time! Keep up the great work!
Cheers Dave, That looks easier. I have just done my tires a few months ago. I knew about leaving it in the sun for a while, but I've not seen the dowel trick before.
There is always going to be a new trick for all of us to learn Darren. I hope the tyres went on easy?
Wow. This is great. I have been struggling with this for weeks
Glad to help steve!
David Stanton I was about ready to give up ever using my bandsaw again!
Thanks for the advice. Made a difficult job quite manageable.
Glad to have been of some help K N.
Watched the video then made the jig. It was too easy. Many thanks for passing this on.
Great to hear!
Brilliant tip! Thanks for sharing.
Glad it was helpful!
Dave I love your drawers... awesome video on them too
They are bloody handy drawers! Thanks for the compliment Svc Woodshop.
Thanks!
Glad you enjoyed it, thanks for watching!
I did this yesterday. Worked perfect.
Thanks for the compliment jx14aby!
I've replaced both tyres on my OAV 530 bandsaw with Urethane ones (not grey or white, but yellow). I've read in several places that they outlast rubber tyres and don't need any glue to hold them in place, but I'm not convinced they are as good as has been suggested. The first time I replaced a tyre was about 5 years ago, when one of the original yellow urethane tyres suddenly broke into several pieces. I had previously wiped both tyres down with a cloth soaked in mineral turpentine to remove some gunge, and I suspect this may have weakened the tyre which caused it to fail months later. However, both top and bottom urethane tyres have recently snapped about 6 months apart, and they have been kept clean and don't have a lot of use. I did heat them in almost boiling water before I plut them on, but I doubt this was the cause of the failures. I'm now going to replace the lower tyre with a rubber one, which is just over half the cost of a urethane one, and after seeing your video I won't be glueing it on.
I'm glad my video helped you.
This is just awesome!
Awesome but simple, thanks Erdem!
Dave How-Are-You
Great and simple way
Great Vid next time I’m doing a change over I’ll look it up
Cheers. Mark🇦🇺
Thanks for the compliment Mark!!
Dave mate, Bloody fantastic Aussie ingenuity at its best. Wait till those Seppos get this under their belts. They will shit some bricks. Fair dinkum mate!
What a top idea
Glad you like it Peter!
Tricky job made easy!
Thanks John!
Hi great video I am going to change my tires on my kity bandsaw on the weekend and as I only have one arm I didn’t know if I could do it. I will now. Thanks for the heads up.nick9toes 👎👍🙈🙉🙊
Glad it helped
Just today I replaced 1 of my 2 tires on my Grizzly 17" bandsaw. I saw a very similar video from the supplier of my tires and used this method. It was a bit of a challenge, but I'm certain it was easier than the 2 screwdriver method. I shall replace the 2nd tire in the next day or two. For the moment my saw is "out of service".
I hope it assisted you.
I cant thank you enough!
My pleasure David Knau !
Awesome video!!
Glad you enjoyed it
Brilliant
Thanks Summers Woodworking!
Great!
Thanks Lewi!
Hi dave, my bandsaw is 97 years old. the wheels are 36" diameter and about 2 1/2" wide. maybe 150 kg each.
the tyres are rubber of course, and are in need of replacement because of mlnor blade runout.
Nice tip Dave. Are those rubber or urethane tires you put on? I have heard that you need to use an adhesive with rubber tires but not for urethane. I believe your tire mounting jig would work for applying adhesive to rubber tires too. I'm getting ready to replace the tires on my saw, after 8+ years I think they are due.
My pleasure Bob, I think they are rubber. I believe that urethane are white or grey?
Great tip Dave. Did you ever work at Carbatec by the way?
Still do now and then.
how might I go about this ?
Dave, how do you know when to change the tires?
Hi Virginia Mark! You need to inspect the tyre for chunks missing or for that matter, if the tyre itself is missing!
When they start jumping off the wheel.
My pulley on my blade wheel (not the motor pulley) works itself loose and comes off. I have re-positioned it and tightened the set screw several times, but in a few minutes of using it, it works loose again. Someone suggested I coat the set screw and keyway with JB Weld. What would you do about this problem? Thank you.
Have you asked the manufacturer about this being a warantee issue?
No I have not since the saw is over 30 years old. I have only been having this problem in the last year. @@DavidStanton
My bandsaw tyres have perished and cracked. They appear to be a rubber based material. Have you experience of urethane alternatives which some suppliers are offering?
Interesting point Peter Bourne. I haven't noticed any difference.
I have a Laguna 14/12 bandsaw. Does this video mean I always have to take the wheels off the bandsaw to change tyres?
Hi Joe Slaven. Only if you want to do it the easy way but bandsaw tires only get changed every few years when torn or they snap..
@@DavidStanton thanks David. The tyre on my lower wheel snapped, so I am replacing both tyres. I have one of the first 14/12s in Oz, and these are the original tyres. Just a bit worried the top wheel , being a press fit, might require a puller.
@@DavidStanton David, Laguna told me to boil the tyres for 5 minutes , but I will be using the very hot water tap, and NOT to stretch it, as the eurethane will not rebound to its original shape like rubber tyres. I thought you would like to know
tune in to Alex Snodgrass, and watch him install a tire without such maneuvers as this.