I watched and liked this video 3 years ago when I was just getting back into the hobby and I remember thinking , in time I might be able to do this , I am now flying mostly with my Radiomaster Boxer and pairing it up to various smaller planes, I just came across the video again this eve as I await delivery of a Radiolink R8XM and a Byme-A V.2.0 . Ready to fit to a Kootai Ki84 I wouldn't be doing this without being inspired to go for it by guys like you making theses videos thank you so much.
You should really try acro mode it works incredibly well and is great for flying the planes because you can do aerobatics and still have self-leving leveling.
Да!!, а до травы на взлетно - посадочной полосе нам месяцев ПЯТЬ!)) Так что изучаем с внуком материальную часть и теорию. Пойду досматривать Ваше РУКОДЕЛИЕ! Чистого НЕБА над головой Yes!!, and we are FIVE months before the grass on the runway!)) So we study the material part and theory with our grandson. I'm going to check out your handicraft! Clear SKY overhead !))😜
Great that you got the Byme-A to work in this. I used 1 in a Banggood "Little Pigeons" 4-ch build - finally successfully. You wouldn't know anyone who has got The Byme-D version to work in a Delta Wing? I have 2 but am yet to be able to get 1 working properly.
@@blowy48flyrc love your channel! They made gel blasters illegal in my state! So now I'm feeding my nead to fly! Played a lot flying game, mainly BF 1942. Flew a bunch of cheap drones! Would like to see a video on the different control methods for cheap RC planes. I have seen a lot of different configurations but couldn't find a video on TH-cam to explain
This Video is exactly What i was looking for. Thanks a ton. Apology I missed some of the description, as I have some difficulty understanding your ascent. I have some questions: 1) Does the Gyro has Beginner and intermediate mood? 2) Is the gyro 6 axis? 3) understand the micro receiver has been discontinued, do you have any other recommendation? I will also be using Radiomaster TX16S. Thanks in advance
yes at 6.33 i show the gyro modes available - the stabilize mode is the beginner 6G (self level) and the gyro mode is just a little assistance 3d and i have ordered 2 other micro receivers to try which i am hoping they work the same links for you LINK here www.banggood.com/FS-RX2A-Pro-V1-2_4G-Compatible-Receiver-for-FS-I6-FS-I6X-FS-I6S-FS-TM8-FS-TM10-FS-I10-Transmitter-p-1257344.html?p=1W070140857347202104&custlinkid=1673364 LINK here www.banggood.com/Flysky-FS-A8S-FS-A8S-V2-2_4G-8CH-Mini-RC-Receiver-with-PPM-i-BUS-SBUS-Output-p-1092861.html?p=1W070140857347202104&custlinkid=1640537
@@blowy48flyrc I i am using the fsa8s and byme-a ...everything work except throttle.. any idea why? all the coutrol working, only throttle not responding. help!
Hi great video!! Did you try to bind the original receiver to a OpenTx radio. I thought it would be the V761 protocol, but it doesn’t work. Maybe is a different protocol. Thanks and best regards
Love your videos! Do you think the Byme gyro works as Well as the X-stabilization in the 400mm warbirds from Eachine and Volantex? I’m looking for a gyro that controls similar to the beginner’s mode On the volantex. Please let me know. Thanks for your great videos.
Well hello again my good friend I have a couple of questions one when you find this aircraft to your old transmitter does it still stay by bound to the transmitter that came with it..??? And number 2..why did change out the gyro...???
@@blowy48flyrc thank you so much my good friend for getting back to me and yes I did check out your maiden flight which was great but would also like to see you have these planes take off from the ground with truly like to see how quickly they take to the air that would be great
@@blowy48flyrc well my good friend if you only have grass maybe you can make a flat cardboard take off strip for these RC planes to take off using their landing gear so we can see how well they do yes just get some cardboard boxes and tape them together and you will have a portable take off spread..just cut off and use the long pieces.and tape them together..try it it will work fine..😊👍👍👍
I installed the Byme A in the same P51. Everything works normal except the elevator corrects in the wrong direction. All surfaces move correctly with the sticks etc... Any idea what's wrong? TIA.
Give the button on the Byme-A 2 short presses. The second LED will change to the opposite state (on/off) and the stabilization correction on the Elevator will be reversed. The Tx stick control will also reverse so you will have to reverse that again in the transmitter. That's why you must ALWAYS set the stab correction BEFORE setting the Radio Stick direction. NOTE that you MUST do the Level Calibration BEFORE you do anything else, to tell the Byme-A which way up it is installed and what is level.
@@theoztreecrasher2647 I usually use Hobby Eagle gyros and this is a first for Radiolink. It seems like it takes a minute or more to initialize and activate. Is it normal for this type?
@@ronkievit6843 The Byme (and many other similar-type gyro stabs) WILL NOT initialize until the plane is sitting right way up on its legs and STILL. Then it takes about 10 seconds or so to fully boot up. That is normal. (The Kopilot Lite GPS-return-capable stab takes about 20 secs!) Note also that some of these stabs require a power cycle for setting inputs to hold properly. I don't think that this 1 does.
This stab unit is an odd one in that, if you don't set up channel 7 on a switch, you can still get 1 half of the available mode selections by switching the channel 5 switch. Mostly it seems to be the Manual/Gyro/Beginner half but that may only be because the center point of your channel 7 is slightly off to 1 side of 1500usecs (0%) - You might just as easily end up with only Hover/Acrobatic/Manual! If anyone out there has these units and access to the appropriate equipment (Signal Generator, Oscilloscope etc) it would help if they would check what exactly are the actual changeover points.
The mini/micro Receiver i used is now discontinued
I watched and liked this video 3 years ago when I was just getting back into the hobby and I remember thinking , in time I might be able to do this , I am now flying mostly with my Radiomaster Boxer and pairing it up to various smaller planes, I just came across the video again this eve as I await delivery of a Radiolink R8XM and a Byme-A V.2.0 . Ready to fit to a Kootai Ki84 I wouldn't be doing this without being inspired to go for it by guys like you making theses videos thank you so much.
You should really try acro mode it works incredibly well and is great for flying the planes because you can do aerobatics and still have self-leving leveling.
Да!!, а до травы на взлетно - посадочной полосе нам месяцев ПЯТЬ!)) Так что изучаем с внуком материальную часть и теорию. Пойду досматривать Ваше РУКОДЕЛИЕ! Чистого НЕБА над головой Yes!!, and we are FIVE months before the grass on the runway!)) So we study the material part and theory with our grandson. I'm going to check out your handicraft! Clear SKY overhead !))😜
Great that you got the Byme-A to work in this. I used 1 in a Banggood "Little Pigeons" 4-ch build - finally successfully. You wouldn't know anyone who has got The Byme-D version to work in a Delta Wing? I have 2 but am yet to be able to get 1 working properly.
Nice maybe I should buy the delta wing version for my stinger and z84 thanks for stopping by
@@blowy48flyrc 1nformatica has a video up now on using the Byme-D in a wing.
@@theoztreecrasher2647thanks I did but one for a little wing. Did you get yours working
@@blowy48flyrc Does work. Check the "1nformatica" videos for information on the strange behaviour on the bench which might otherwise confuse us!
Looks good will watch when I'm a little less drunk though 😜! Just got a three channel sky king this week and I Am Loving IT 💕💕💕
Totally stoked 🤠
Thanks for stopping by
@@blowy48flyrc love your channel! They made gel blasters illegal in my state! So now I'm feeding my nead to fly! Played a lot flying game, mainly BF 1942. Flew a bunch of cheap drones!
Would like to see a video on the different control methods for cheap RC planes. I have seen a lot of different configurations but couldn't find a video on TH-cam to explain
This Video is exactly What i was looking for. Thanks a ton.
Apology I missed some of the description, as I have some difficulty understanding your ascent. I have some questions: 1) Does the Gyro has Beginner and intermediate mood? 2) Is the gyro 6 axis? 3) understand the micro receiver has been discontinued, do you have any other recommendation? I will also be using Radiomaster TX16S. Thanks in advance
yes at 6.33 i show the gyro modes available - the stabilize mode is the beginner 6G (self level) and the gyro mode is just a little assistance 3d
and i have ordered 2 other micro receivers to try which i am hoping they work the same links for you
LINK here www.banggood.com/FS-RX2A-Pro-V1-2_4G-Compatible-Receiver-for-FS-I6-FS-I6X-FS-I6S-FS-TM8-FS-TM10-FS-I10-Transmitter-p-1257344.html?p=1W070140857347202104&custlinkid=1673364
LINK here www.banggood.com/Flysky-FS-A8S-FS-A8S-V2-2_4G-8CH-Mini-RC-Receiver-with-PPM-i-BUS-SBUS-Output-p-1092861.html?p=1W070140857347202104&custlinkid=1640537
Thanks so much!!!
hi, in Opentx / radiomaster, under FlSky 2A, should i choose PPM SBUS or PWM SBUS as sub protocol in ? thanks !!
@@ooiak3387 using flysky micro receiver fsa8s pwm sbus is working for me I show this in my video How to bind XK rare bear in a couple of hours
@@blowy48flyrc I i am using the fsa8s and byme-a ...everything work except throttle.. any idea why? all the coutrol working, only throttle not responding. help!
Hi great video!!
Did you try to bind the original receiver to a OpenTx radio. I thought it would be the V761 protocol, but it doesn’t work. Maybe is a different protocol.
Thanks and best regards
I think we can't bind to this volantex protocol its a shame
Love your videos!
Do you think the Byme gyro works as
Well as the X-stabilization in the 400mm warbirds from Eachine and Volantex? I’m looking for a gyro that controls similar to the beginner’s mode
On the volantex. Please let me know.
Thanks for your great videos.
i installed the Radiolink byme A in a 520mm wingspan biplane. Still waiting for good conditions for maiden flight.
Well hello again my good friend I have a couple of questions one when you find this aircraft to your old transmitter does it still stay by bound to the transmitter that came with it..???
And number 2..why did change out the gyro...???
Yes the original controller did stay bound no problem there. Can I change the Giro because I wasn't happy how it flew check out my maiden flight video
@@blowy48flyrc thank you so much my good friend for getting back to me and yes I did check out your maiden flight which was great but would also like to see you have these planes take off from the ground with truly like to see how quickly they take to the air that would be great
We only have grass and this 750mm doesn't take off on grass
@@blowy48flyrc well my good friend if you only have grass maybe you can make a flat cardboard take off strip for these RC planes to take off using their landing gear so we can see how well they do yes just get some cardboard boxes and tape them together and you will have a portable take off spread..just cut off and use the long pieces.and tape them together..try it it will work fine..😊👍👍👍
Yes we might work out some sort of run way and I to like planes that take off and land on there wheels
Mine burned in a bench fire.. trying to figure if I should rebuild or just buy another
IF YOU COULD COULD YOU LET ME NO WHAT MULTI PROTOCOL I need on the tx16s please
I think we can't bind to this volantex protocol its a shame
Hi can it be set with a v.tail? thanks.
I installed the Byme A in the same P51. Everything works normal except the elevator corrects in the wrong direction. All surfaces move correctly with the sticks etc... Any idea what's wrong? TIA.
Give the button on the Byme-A 2 short presses. The second LED will change to the opposite state (on/off) and the stabilization correction on the Elevator will be reversed. The Tx stick control will also reverse so you will have to reverse that again in the transmitter. That's why you must ALWAYS set the stab correction BEFORE setting the Radio Stick direction. NOTE that you MUST do the Level Calibration BEFORE you do anything else, to tell the Byme-A which way up it is installed and what is level.
@@theoztreecrasher2647 I usually use Hobby Eagle gyros and this is a first for Radiolink. It seems like it takes a minute or more to initialize and activate. Is it normal for this type?
@@ronkievit6843 The Byme (and many other similar-type gyro stabs) WILL NOT initialize until the plane is sitting right way up on its legs and STILL. Then it takes about 10 seconds or so to fully boot up. That is normal. (The Kopilot Lite GPS-return-capable stab takes about 20 secs!)
Note also that some of these stabs require a power cycle for setting inputs to hold properly. I don't think that this 1 does.
@@theoztreecrasher2647 super helpful information. Thanks alot!
You never set up channel 7?
This stab unit is an odd one in that, if you don't set up channel 7 on a switch, you can still get 1 half of the available mode selections by switching the channel 5 switch. Mostly it seems to be the Manual/Gyro/Beginner half but that may only be because the center point of your channel 7 is slightly off to 1 side of 1500usecs (0%) - You might just as easily end up with only Hover/Acrobatic/Manual! If anyone out there has these units and access to the appropriate equipment (Signal Generator, Oscilloscope etc) it would help if they would check what exactly are the actual changeover points.
Can an elrs recover be used?
I use the same gyro on the same plane.
Nice is it working good for you too
@@blowy48flyrc So far, so good 👍
@@JakeRC Have you tried the Byme-D for a wing?
@@theoztreecrasher2647 I haven't. Don't have wings.
@@JakeRC If you do get around to trying wings and the Byme-D "1nformatica" has a video up with "Essential Information" on setting it up! 😁
Can you use this with the rtf transmitter?
Nope.
It fly better with 2 props . I made a video on it . was so fast . love this plane 💪
Really what 1 inch bigger
Which propeller size did you use for 2 blade mate?
@@toddventura7191 I think it was a 5 by 7