First steps to getting a long dormant M35A2 running
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- The first things I do when attempting to start an M35A2 that hasn't ran in many years.
Check out our sponsors for all your military surplus parts and paint needs!
For parts: www.bigmikesmo... 609-894-4123 Great prices and fast shipping!
For top quality paints and any surplus military Jeep parts: rapcoparts.com/ Or call: 940-872-2403 You'll probably speak with Mark or Scott. Both great guys that will help you out. Don't forget to tell our sponsors I sent you when you order!!!!
If you'd like to support the channel, you can donate any amount to:
tacriflesmith1@gmail.com on PayPal.
Label your donation as " donation" or " support" so we don't get our donations confused with our used parts customers. We want to thank you!
Never apologize for having a truck running. I'll listen to that multifuel engine run all day long!
That was the Cummins you were hearing. 😄
@@tacticalrepair I'll listen to that too! Cummins 8.3 or 5.9 swap?
Great timing. I have 2 to get running that I haven’t started in about 7 years. Looking forward to more videos about this. You may have diverted disaster in my situation. Thank you !!!
Might be getting one finally after so many years. Wish I could have gotten one after Katrina.
I need one of them
Thanks for sharing. One I'd be curious to see (although I am sure many of the steps are similar) would be getting a long-dormant M939 series running.
Andy what engine is it in you 939 series truck, is it the naturally aspirated 855 Cummins or is it that little turbocharged engine? IF its the 855 with no turbo charger its essentially just make sure you fuel is actually fuel that is decent condition, ie. no water, no dirt no dead animals etc, you get my drift. Make sure the batteries in the truck are in good condition, check to make sure its got oil in the crank case and go ahead and fire it up, stay off the throttle and let the engine idle for at least 5 minutes before exceeding 1000 rpm, they start amazingly well if just a couple things are checked before starting. IF you have the turbo charged engine you will want to shut the fuel off at the Injection Pump so you can turn the engine over till you have oil pressure on the gauge then after you see that then go ahead and turn the fuel back on at the IP and start the engine. The PRIMARY concern here is to make sure the turbocharger has oil to it before the engine starts. Last thing is just make sure the fuel is in reasonable condition, if the fuel is shit neither truck is going to do will with it!
Good luck Andy!
I want to buy one
Great info you sir have earned a subscription
You must have been reading my mind. I have a parts truck that last ran about 10 years ago. The frame is cut behind the cab and it only has 1 rear axle with it. Donnie drove it through the woods before he sold the axles. Still have the rest of the drivetrain with it. I wanted to see if it would run but the fuel tank is not there.
Run it off a Jerry can
No wonder I'm seeing these for sale with blown motors
Is there an short cut way to do a tappet removal and install on an M35A2 multifuel??
Nope
all the talk about wasps, nothing about the lizard at 3;31.
He's harmless
Ha,ha, yeh the first time I watched this I had to rewind a couple times to see if I was seeing what I thought I saw. Daughter thought it was cute , ha,ha,.
Yeh if he gets coffee cups or other merchandise he will have to put a small wasp nest hidden in the design somewhere, ha,ha,.
great seeing your video man, glad ya made it to to the rally! what are your thoughts on filling the diesel tank all the way up to the top to keep moisture out? seen couple of guys do that but i dont think id trust it...
It works. Just need to treat the fuel to keep algae out.
the arrow (crowd)does not work in truck wrekers please the solution
Can you get starter rebuild kits for M-35's?
Yes, but I don't know where from. Starter shops still rebuild them so there must be kits.
What does he use all these trucks for?
I think he just collected some and some he bought to resell.
@@tacticalrepair He's selling them? Here is some tips on how to sell a Truck: th-cam.com/video/F8P5vGcf-NU/w-d-xo.html
Darn Man Wished I could have been there Garrett. IT's a ways for me to travel but just got my truck this summer, so maybe I can plan for next year. wished I could have been there. Can you do any help with Fog lights? I'm wanting to put Amber fog lights on my truck..really need them. 24 volt is harder to find. I do have a 60 amp traducer that was put in though. what would be a good set? Im wanting round ones. Can I hook them straight into the transducer?
above comment by~ JOhn Arnold
@@linarn4671 you can use 12v lights on a 24v circuit. Simply wire the lights in series.
@@tacticalrepair thank you G- , man you super. You need to come up. With an O.D. Shirt for Tactical repair & sell them though you tube like Deuce & Guns does. Don’t forget to have a Deuce on it for a design & Have a wasp or (wasp nest )up in the corner of the shirt somewhere in the corner , ha,ha,. Or even a coffee cup.
IDE buy them for sure.
@@Joseywales414 you're not the first person to suggest that. I'll have to make an effort to get something like that going.
Does that Air Force truck have normal nuts or WING NUTS? Hmmm ,ha,ha,.Lol
Bro , Im still interested, I'll send you an email.